I have a cell value in sheet 5. I want a macro to find that cell value in sheet 1, offset -14 columns and give that new cell the value in the column next to the original value in sheet 5. I named the ranges in sheet 5 that i wanted.
here is my original code.
[Code] .....
I type in a number in G8 in F8 a town name comes up which is on another sheet in column c the number I typed in G8 in in column B of sheet 2 It continues all the way down in column G with differance numbers.
View 3 Replies View RelatedI have on sheet 2 in column D names of cities the vary like Sydney Brisbane could be twice but each week the cells could have difference city in them. In column F it will have a number in them a difference number each week . I need the total of the number that matches the city added up on sheet 1 that matches the city in sheet 1 which on sheet one the city never moves.
View 4 Replies View RelatedI have worked on the code – with as limited knowledge as I possess – to perhaps communicate my intention. I know for a fact that in the code below there are 2 problematic lines – and herein lies the root of my problem. The first line is: “Dim Day As String” In Debugger speak, I am told that this cannot be done along with “Set sh = Worksheets(Day.Value)”. However, in normal speak, I am trying to copy data from one sheet to another. When pasting the data on the second sheet, I am trying to make the code find the appropriate sheet that matches a Day value in Cell I5. Getting the code to execute this one action is proving to be particularly difficult. I am thankful for any suggestion on how to get the code to work correctly.
View 14 Replies View RelatedI have two work sheets where I have data.
Sheet1 contain daily input table which as follows:
Name salaryBonusXX10002XY9001YY11002ZY15003ZZ12502AA10502AZ9501
Sheet2 have table where all the information is saved. So we can say this is database of sheet1. Which store every day information of sheet 1.
SALARY DATABASEMonth Name Salary Bonus
Problem:
I want that when I finished writing on the sheet 1(which i do manually) then with macro it go the sheet 2 and find first empty cell in the name column and past the all the data of sheet1 table. Months I will put manually. I am working on MS2003.
On Sheet1, I have 6000 rows of Data of which Columns B (ID) and D (Date) are needed to locate the row number on Sheet2.
Sheet2, Column A will correspond to ID and Columns C and D are start/end dates.
I am looking for a calc/function that will locate the row in which the ID matches column A and Date falls on or between the dates in C and D...as I will need the value in Column E of that row.
I have a Workbook with 18 "sheets and a recap sheet. Each sheet will have a different number of rows between A9 and N60. On my recap sheet I want to be able to find what the last row with data in Column A and then be able to do a vlookup on that row to display the data in Column 2,3,4, exc. I know how to do the vlookup's fine but I don't know how to specify to select the last row. The data will always be different and the number of rows will never be the same either.
I tried the below formula because everyone complains that if you use True is returns the last row but that didn't work.
=VLOOKUP(A2,Sheet_2!$A$9:Sheet_2!$N$60,2,TRUE)
Is there a way to do this without VB, I don't understand VB at all and that would get way over my head really quickly.
I have to sets of data, each in a sheet with the first column as identical for both sheets. Sheet2 contains two series of 6 rows, each for a specific first column (""B Code").
Now I want to find the values of "TCT-C" column in sheet1 (for each range of 6 rows that the "B Code" is match) which corresponds to the row number that "TCT" in sheet2 is maximum (again for 6 rows). The point is, I need to shift to another series of 6 rows in sheet2 once the "B Code" does not match.
Hello everyone....
I have a project where I need items for different boxes.
i have 20 boxes that need the same amount of items. However, when I came towards the end, i ran out of items.
For example
BOX A IS MISSING
ITEM 1 AND 2
BOX B IS MISSING
ITEM 2 AND 5
BOX C IS MISSING
ITEM 1 AND 5
I have all in a spreadsheet all the items that are missing per box. Here comes the main question....
How do I program my spreadsheet find the items that are missing in each box and summarize in another sheet?
The summary I am looking for is....
ITEM 1 - 5 (MISSING)
ITEM 2 - 9 (MISSING)
and so on...
I started doing the code, but I haven't got too far.
I have 2 sheets and i have a date which is common in both
In sheet 1 I want to find a date in column A17:A23 (it will always be rows 17 to 23) and then copy column C, E, G
I then want to find the same date in Sheet 2 column A (The date could be on any row in Column A) and paste the value in column S, T,U
described the code for calculating the boundaries of the visible area of the sheet - that is the bit you can see on screen.
View 9 Replies View RelatedI have a workbook with two tabs in it. The first tab (2004) contains a current price sheet. The second tab (2007) is an updated price list from our vendor with added part numbers so the rows are not corresponding to the 2004 tab although the columns are exactly the same. I have changed many of the descriptions (Column C) in the 2004 tab but need to use the new sheet because of the added part numbers.
I would like to find an easy way for excel to find the matching part numbers in Column A of both tabs(sheets) and return into column C in the 2007 tab(sheet) the description for each part number from the 2004 tab. For those new part numbers in the 2007 tab the description should remain (as there will not be one in the 2004 tab) but I would like for it to somehow flag me (color change) so I know which ones I need to manually change.
The columns in each tab (2004 and 2007) are exactly the same. Column A is empty, B is the part number, C is the description and D is the Page number.
Can I create a formula to make this easy? If so how? Data in tab 2004 is in Rows 3 to 2157 and the data in tab 2007 is in rows 3 to 2532.
[Code].....
In the file I have attached, this code works great taking information that has a value greater than zero from Sheet2 and putting it onto Sheet3. I tried to use this code to take information from Sheet1 from different cells than Sheet2 and also put it onto Sheet3, but I can not get the code to do anything.
Example.xlsm
I have a userform that has Label 1, textbox1 and textbox2 at the top. (I shall call it HEADER)
Then, arranged in a row i have combobox1, textbox4, textbox6, textbox7 and label7 (I shall call LINE1)
On a row beneath this i have combobox2, textbox12, textbox14, textbox15 and label 10 (I shall call LINE2)
I need a way of finding the first empty row on sheet 1 (easy bit) and then putting the info from the HEADER and LINE1 in the first empty row, then HEADER and LINE2 in the next empty row etc etc. There are 5 rows in total
One of my Worksheets gets populated, by another application, with variable number of Data Rows, each time.
sometimes, there are BLANK rows, as well, in between the consecutive data rows.
In one of my macros, I need to find the following:
Total number of rows, including blank and non-blank
Number of blank and number of non-blank rows.
In my userform I have a lot of textboxes. When the user clicks "OK" the values of these textboxes are transfered to row 3 of sheet1.
For this I use some of the code below:
Code:
If NaamTextBox.Value = "" Then ActiveCell.FormulaR1C1 = " " Else: ActiveCell.FormulaR1C1 = NaamTextBox.Value
ActiveCell.Offset(0, 2).Range("A1").Select
If GroepComboBox.Value = "" Then ActiveCell.FormulaR1C1 = "" Else: ActiveCell.FormulaR1C1 = GroepComboBox.Value
ActiveCell.Offset(0, 1).Range("A1").Select
If TypeTextBox.Value = "" Then ActiveCell.FormulaR1C1 = " " Else: ActiveCell.FormulaR1C1 = TypeTextBox.Value
ActiveCell.Offset(0, 3).Range("A1").Select
If TypecodeTextBox.Value = "" Then ActiveCell.FormulaR1C1 = " " Else: ActiveCell.FormulaR1C1 = TypecodeTextBox.Value
This goes on for about 55 columns. Also, not every column is used as you can see in de code above.
It seems to me that this is not smart coding, so my question is: can you make this more efficient?
I did find some nice code with uses EmptyRow (find first empty row) but in my case it's always row 3 where de input is placed. After this row follows much more data.
Looking for a formula (not macro) that can do the following:
I have a spreadsheet and in one column, it has last names of clients. In the next column, it has full names of clients that are the same account, but different system with different descriptions for the name. I need to lookup the column that just has last name and see if that last name exist anywhere in the "Full name" column. If it does, then I need column C to say "Yes" or something along those lines.
The "full name" column isn't always in the same format and sometimes doesn't even contain the "last name." Sometimes the last name will be first and sometimes there's a comma and sometimes there isn't a comma. The spreadsheet attached shows a good short example of what I'm working with...
Name Spreadsheet Ex.xlsx
I am creating a macro to automate data analysis for work, but I've become stuck.
I need to find the coordinate of the first cell in a column with word "reserved" or "extended" contained in the cell, and then assign the row number of that coordinate as a variable to use for moving data around. Basically, I want something like VLOOKUP, but instead of returning a value, I want it to return the coordinate.
Macros question - The user enters a word, e.g. Malaysia in a particular cell (always the same location) and I want the macro to be able to find the next cell with that word in it, but it appears that when using macros you can't paste anything into the find function, so was just wondering what to do!
View 1 Replies View RelatedHow to find a particular cell value, example: i have sheet and in that we have 30 employee names and i need to map the data of work from home, which is in dark bule color and need to make a total of it. rather than counting the all the sheet details from month start till end. I need to find it in a quick shot.
I would like to prepare a shift schedule for 3 months it should be a automated.
Ok, I've come close to the solution using the Match function, but somehow just can't quite nail it.
What I need is a formula that will search down Column B until it finds the first blank cell. Then report what is directly to the left of that cell.
So If the first blank cell is in $B$5, it will report what is in $A$5.
I have another post here on this forum, but I'm afaid the formula is getting so complex that nobody is able to fully understand what I want. Instead I want to find a value between two numbers and add it to some IF sentences. It will do what I want, even if it's not that elegant.
I've looked at the SUMIF function but it did not do exactly what I wanted. It finds a number or adds numbers only if they are in range it seems.
What I want is the following:
Return sum between 500 and 1000 in one cell.
I am trying to extract text from one cell into another, for example if in cell A2 I have text " {Operating System Issue} ~Word~ I got a new PC i used to have avaya…" in cell b2 i want {Operating System Issue} and in Cell c2 I want ~Word~.
This is what i am doing, in Cell B2 in putting formulla as =MID($A2,FIND("{",$A2,1),FIND("}",$A2,1)) and in cell C2 i am putting formulla as =MID($A2,FIND("~",$A2,1),FIND("~",$A2,1)). However in cell C2 thsi si what I am getting
~Word~ I got a new PC i used
i dont want anything after "~" sign. What i need is only the text that is in betwwen "~" sign.
I have to copy and paste some datas under anothers but I don't know the code to do so; I mean, the code to paste on the first empty cell under the previously used cell.
View 12 Replies View RelatedI have data entered in rows 2:10. The amount of data is variable for each row. For example, in row 2, columns A:F are filled out, and the rest (G:P) are blank. In row 3, columns A:J are filled out and K:P are blank. The data is always entered from left to right, and to a maximum up to column P. Hope this makes sense.
In column Q, I want to write a formula that will tell me the last filled column of that row (A=1, B=2, C=3, etc.). So in Q2 would display 6. Row 3 would display 10. And so on.
I have a worksheet where I need to start at c1 and move down col c until I get to a cell containing text. The left 6 characters will be "budget".
Not sure what the code would be for that.
assist me with editing this code so that even though my range may be set from A1:A3000 it would stop after finding and completing its task in the last cell in column A with data. This code will put dashes in a set of numbers and there is no certain amount of account numbers that could end up being in column A on any given month.
View 3 Replies View RelatedI am now looking for a command that will return if a cell is populated. I.e. I need something that will find out which cell is the last one populated in a column (populated = contains data) and then will move 2 cells down, and then will enter some data into the following cells.
View 4 Replies View RelatedIs it possible to find the unsaved data in a spreadhseet/workbook? Or the last cell was edited?
After working on multiple workbooks when I try closing them excel confirms if the changes should be saved or not. I was wondering if there was a way to check what those changes were. If there was a way to find address of the cell that was edited last.
I've got a spreadsheet where column A has dates and time and column C has over 8000 rows of numbers.
I'm looking to pull the date and time from column A associated with a value in column C...
how do i do a "lookup" in this case?