One of my Worksheets gets populated, by another application, with variable number of Data Rows, each time.
sometimes, there are BLANK rows, as well, in between the consecutive data rows.
In one of my macros, I need to find the following:
Total number of rows, including blank and non-blank
Number of blank and number of non-blank rows.
I have multiple rows of data. Some have single invoice number and some have 3. I want to find the rows with multiple same invoice number by filtering then selecting certain data and paste to another sheet.
sheet1 A:I
Name
PO
Chemical
C/T
Center #
[Code]....
On Sheet1, I have 6000 rows of Data of which Columns B (ID) and D (Date) are needed to locate the row number on Sheet2.
Sheet2, Column A will correspond to ID and Columns C and D are start/end dates.
I am looking for a calc/function that will locate the row in which the ID matches column A and Date falls on or between the dates in C and D...as I will need the value in Column E of that row.
I've written the following code to insert rows at certain points depending on certain conditions, looping through to the last row. However, as the last row number keeps moving, due to inserting rows, I am not sure how to alter the code to allow for this.
Dim LastRow As Long
With ActiveSheet
LastRow = .Cells(.Rows.Count, "A").End(xlUp).Row
End With
[Code]......
calculate the number of full rows in one data base located on one sheet X to determine how many rows the macro needs to extend on sheet B (sheet B is made only of formulas for data interpretation in sheet A.
View 14 Replies View RelatedI have 2 sheets and i have a date which is common in both
In sheet 1 I want to find a date in column A17:A23 (it will always be rows 17 to 23) and then copy column C, E, G
I then want to find the same date in Sheet 2 column A (The date could be on any row in Column A) and paste the value in column S, T,U
I have a workbook with two tabs in it. The first tab (2004) contains a current price sheet. The second tab (2007) is an updated price list from our vendor with added part numbers so the rows are not corresponding to the 2004 tab although the columns are exactly the same. I have changed many of the descriptions (Column C) in the 2004 tab but need to use the new sheet because of the added part numbers.
I would like to find an easy way for excel to find the matching part numbers in Column A of both tabs(sheets) and return into column C in the 2007 tab(sheet) the description for each part number from the 2004 tab. For those new part numbers in the 2007 tab the description should remain (as there will not be one in the 2004 tab) but I would like for it to somehow flag me (color change) so I know which ones I need to manually change.
The columns in each tab (2004 and 2007) are exactly the same. Column A is empty, B is the part number, C is the description and D is the Page number.
Can I create a formula to make this easy? If so how? Data in tab 2004 is in Rows 3 to 2157 and the data in tab 2007 is in rows 3 to 2532.
I've got data output (~500 rows) that's going into a larger, formatted sheet. The data going into the sheet is about 8 columns of material and the formatted sheet has over 20 columns (the rest to be filled out by the engineers). I'm tacking the new information to the bottom of the sheet (in the corresponding, non-consecutive columns), but the question now is how to format it.
Each location has recommendations, about 1-5 rows. What I want to do is insert a row after each different entry (probably by location address) so it will be more visually accessible (this is the format of the sheet).
Using VBA, I'd like to copy the formulas down from the first row of one sheet to the same number of rows that are used in a second sheet. For example, if 100 rows are filled in column A of sheet1, I want to copy the formulas in row 1 of sheet2 to rows 2-99 of sheet2.
View 3 Replies View RelatedCalculate the number of rows used in sheet. for exa: i have A1:A100 i want that B1=100 and if i delete some of rows the number of rows in B1 auto-change. and can let B2 display the number of rows deleted.
i have 2 sheets now, can the Cell C1 in sheet 2 display the number of rows in the sheets, B1 in sheet1 + B1 in sheet 2
In my Macro , i add a worksheet and depending on certain conditions i decide whether to populate it or not.
At a later point of time i am checking if the newly created worksheet is empty or not using the following check :
If ActiveWorkbook.Worksheets(ISheet).UsedRange.Rows.count <> 0 Then
Now what i have noticed is that even in cases where the "ISheet" is empty the above condition evaluates to true for the first attempt. I cannot understand why ?
let me know if the query is ambiguous and i will post the code snippet
I want to be able to paste the large amount of data I get each day into the first sheet in my workbook ("data dump" sheet), the data will be formatted in the way i have used in the example workbook.
I then would like to be able to just have to enter 2 values into columns A and B of "1st output" sheet (Label in A, and Item in B), then have it look up the data that corresponds to those 2 values that are both in the same row in the "data dump" sheet, and have it copy and paste all of the relevant data in that row into the row in the "1st output" sheet.
The data I would want excel to find and place for me in the first sheet is highlighted in yellow
As a way of keeping track of this every day, I then need the data from the "1st output" sheet, to be fed into the "2nd output" sheet. This sheet would have all of the peoples' names already in it, but would just need to look in the "1st output" sheet for references to these names. If one of the names pops up, I'd need the date shown in the row of that instance to be placed after their name. This will allow me to keep a log of how many times their name gets flagged up, as well as the dates on which it happens. Again, the data I'd need excel to look up in the "2nd output" sheet is highlighted in yellow.
If there was a way of having the 2nd sheet add new names it finds on the 1st output sheet, that aren't already referenced on the 2nd output sheet in column A, that would be amazingly handy if it could then enter that name into column A and start a new row for them
Example file :
Attachment 334122
Alternative link [URL]
Excel 2007
ABCDE12145101843222121028543291410388563015104796731501058178325210
685894953107839104354108841011445510985111349661101215516710013135668
981417576999151858708916195971801720607291182161738219236274902024637
59121276476872228657786232425Sheet1
Currently, Im running a button macro. When this button is clicked, the table from "315 Employee Data" will copy the names from column C to "315" sheet B12 onwards.
Now, what i want is when I update the employee data on "315 employee data" sheet, I want "315" sheet to automatically match the names from "315 employee data", delete and add names when I add or remove employees from the column the next time i click on that button again.
After the above is achieved, when i add new employees,run the macro and it displays the updated list of names, I want "315" sheet column A to do automatic numbering.
I have attached the file for your reference.samplesample.xlsm
I have a couple of spreadsheets that requires me to copy data from Sheet 1 that matches certain criteria to Sheet 2.
I have tried using posted VB codes that have been written for other people but they dont seem to work (this is probably to do with me not actually knowing what I am doing, as I am not sure what I should be replacing and what I need to be deleting etc out of the pre-written code )
I need to be able to search on column e in Sheet 1 for anything that has just h written in the cell and then copy all the rows that match into Sheet 2. I also would like to ensure that when it is copied it doesnt go in row 2 but maybe 4 or 5 as I have quite allot of headings.
Designated Cell = 7
1 10 .034
15 25 .072
35 45 .089
Output Cell = ???
I am trying to find a formula for the output cell. Suppose the designated cell = 7 due to formulas above it. So that number is always given but can change. I then need a formula for the ouput cell that says if the designated cell is greater than or equal to 1, and less than 10, then the output cell should equal .034. So suppose the designated cell = 18.2. Then I would want the output cell to be .072 since it is greater than or equal to 15, and less than 25. The template I am using has 23 rows of numbers like above. I didn't know how to do it for 23 rows though. If/Then doesn't work because it is 23 statements long (well over the seven limit) and the vlookup only works when the cell is equal to a number and not a range.
I have a workbook, "Assessment District" with 3 worksheets. In worksheet "Original," I have 252 rows with columns A-V. I want to copy two coloumns "C" (range 6-252) and "N" (range 6-252) from the worksheet, "Original" into a new worksheet titled "Send" in columns A & B. I only want to copy the two columns "C" and "N" for each row, if column Q does not contain "beach town" or "freeway."
For example, row 6 contains beach town, so I wouldn't copy C6 and N6 onto "Send," but row 100 doesn't contain beach town or freeway, so I would copy C100 and N100 into "Send."
This is a workbook that would be updated annually.
I'm not skilled in VBA at all, but want to impress my supervisor where I'm interning.
I have several files of data that are from a data logger. The data is broken up by day. Each day has roughly 43000 rows of data, at its sample rate. This has made charting the data a nuisance. Is there a way to resample the data so it fits in the 32000 points excel can chart? In the future I will set a sample rate that will keep the number of points below the 32K per series. I would like to be able to have the total number of points reduced by averaging the data not by simply deleting one of every four rows.
View 5 Replies View RelatedI'd like to be able to search a spreadsheet for a specific word or series of characters. Once all of the ROWS that contain the characters are found, I'd like to be able to have another spreadsheet with ONLY those rows (all columns).
View 8 Replies View Related I have created a userform with multipage, has two page that add new record in a excel sheet. Data has a unique reference no.(TxtRef.Value) for each record. I am trying to add a button to load the added data for a specific record using reference no back to userform so that it can be updated and overwrite back to the sheet in the same row, So far it is adding new record correctly. I do not know how to populate all the fields of the of an existing record and overwrite it back to the same row instead of adding a new record. Below is my codes
[Code].....
how to get the number of rows with data in a particular column.
Date
12/2
11/3
10/2
11/4
here DATE is the column heading
and here number of rows with data is 4
HOW to get it from VBA statements
i want a macro that will start on D25 and enter a 1 for five rows up to D29
than change and enter a 2 starting on d30 and enter a 2 for five rows
up to D34 than change an enter a 3 up to D39 ....... on and on up D225.
I have a spreadsheet like the one below. The data is just a bunch of 1s but they are in specific cells:
A1
A2
A3
A4 1
A5 1
A6
A7
A8 1
A9
A10
I need to calculate the number of rows between the first piece of data and the last. In the above example the answer would be A8-A4 = 4 Rows.
I am thinking I need an array that searches for the first data point, then returns the cell ID, does the same for the last data point then subtracts the higher cell id from the lower.
Original
01012014 DAVE JOHN
02012014 MAT
03012014 CHRIS MIKE PHIL
What I want
01012014 DAVE
01012014 JOHN
02012014 MAT
03012014 CHRIS
03012014 MIKE
03012014 PHIL
The following code displays the message box and loads a userform if the Active cell offset 1, -1 when within G column equals "LAST ROW".
[Code] .....
How can I change it so instead it performs those same actions (displaying the message box, and loads the userform) if the number of rows between the last data entry in G and the last data entry in F is equal to 0?
Inserting Variable Number Of Rows and Populating Data
View 10 Replies View RelatedI have a list of serial numbers for coins I collect. As I collect the coins I wouldlike a spreadsheet where I can enter on a sheet and it will then highlight that serial number from a data sheet I have already created.
I have an excel file that contains about 1000 rows of data, from column A to O. Column C contains either the letter A or the letter I, A means Active, I means Inactive.
What I'd like to do is replace my monthly manual task of moving all the I's to sheet2. When completed, the excel file should have two sheets, all of the A's on one, and the I's in the other. The original excel file is not sorted by column C. The end result should have the same row 1, being the header row. There are some additional steps, to save the file to a specific location but I think I could do that once the excel file is formatted the way I wanted it.
I am trying to find the percentage in a column that is used the most. I know =MAX() finds the maximum number but I need the one that is used the most and if there are 2 that are the same, I need the greater of the two.
View 9 Replies View RelatedI am trying to find the next cell in Column C that contains a value. Please see attachment.
ie.
I need a formula in cell E7 that will find the next number in Column C after the row it is in (ie. the number "2" in cell C9). E7 should then return the row number (ie. 9).
