Finding The First Empty Cell
Sep 17, 2009I have to copy and paste some datas under anothers but I don't know the code to do so; I mean, the code to paste on the first empty cell under the previously used cell.
View 12 RepliesI have to copy and paste some datas under anothers but I don't know the code to do so; I mean, the code to paste on the first empty cell under the previously used cell.
View 12 RepliesI want to use VBA to find the first empty cell in a colum. But I want VBA to start look for this empty cell after cell B10 and not from the top of the colum. I also want that the VBA stop looking after cell B20. The last part I already have (see below) but I don't know how to have VBA to start the search in cell B10 and not in the top.
Range("B20").End(xlUp).Offset(1#).Value = Range("C1").Value
This macro
ActiveSheet.Range("A65536").End(x1up).Offset(1,0).Select
when run locates the next empty cell in Column A perfectly. But.... how can I get this to work from a button located at the top of the spreadsheet?
I am only a copy and paste man where macros are concerned!
I am trying to write a macro that looks for the first empty cell in column G, Then once that cell if found, assigns that row to be the row that other data is copied and pasted to. My code currently just finds the first empty cell in each column and copies and pastes the data and am not sure how to get it to what i need it to do.
Code:
Sub seconddatatransfer()
Dim wb1 As Workbook, wb2 As Workbook, sh1 As Worksheet, sh2 As Worksheet
Set wb1 = Workbooks("filestransfer.xlsm") 'Edit file extension
Set wb2 = Workbooks("KBCG.xlsm") 'Edit file extension
Set sh1 = wb1.ActiveSheet
Set sh2 = wb2.Sheets("Tracking Sheet")
sh2.Cells(Rows.Count, 2).End(xlUp)(2).Value = sh1.Range("B6").Value 'left
[code]....
I was wondering whether someone knows a formula that would be equivalent to WEEKNUM (excel 2003) since I will not be able to install the Analysis Toolpack because of IT validation issues?
View 4 Replies View RelatedI have two work sheets where I have data.
Sheet1 contain daily input table which as follows:
Name salaryBonusXX10002XY9001YY11002ZY15003ZZ12502AA10502AZ9501
Sheet2 have table where all the information is saved. So we can say this is database of sheet1. Which store every day information of sheet 1.
SALARY DATABASEMonth Name Salary Bonus
Problem:
I want that when I finished writing on the sheet 1(which i do manually) then with macro it go the sheet 2 and find first empty cell in the name column and past the all the data of sheet1 table. Months I will put manually. I am working on MS2003.
I can put the Data in F21, but then I need to skip a cell and put the next Data in H21 and so on, the cells are in yellow that I need to string out the data in. so every time I open the form the data skips a cell.
View 6 Replies View RelatedI am using the following code to find an emtyRow, but I actually need to find an emptyRow and test all the cells of the rows from A thru O to insure that there is nothing in any of the next emptyRow. How would I change the code?
VB:
Private Sub SubmitButton_Click()
Dim emptyrow As Long
'Make sheet1 active
Sheets(1).Activate
[Code] ......
I need to append this macro to find the next empty column to place the data in. The orignal VBA works fine, but I need to go into the editor, and repalce the offset number every time I add a new row (weekly).
Here's the orignal coding:
I need code in VBA that look for empty cells at a range and return msgbox with the empty cell
View 5 Replies View RelatedI am using the code below to copy data from a sheet that updates externally to copy to a database. For some reason it has quit finding the next empty row to paste data. It is currently over writing the data to row 61. any help advice or suggestions will be greatly appreciated, I am an armature if there is a better way please let me know.
'Copy SUSD data to datbase
Sheets("Summary - SUSD").Select
Range("SUSD_DATA").Select
Selection.Copy
Sheets("SUSD Database").Select
Range("b6" & LastRow + 1).Select
Selection.PasteSpecial Paste:=xlPasteValuesAndNumberFormats, Operation:= _
xlNone, SkipBlanks:=False, Transpose:=False
' Sort Data..............
I have a userform that has Label 1, textbox1 and textbox2 at the top. (I shall call it HEADER)
Then, arranged in a row i have combobox1, textbox4, textbox6, textbox7 and label7 (I shall call LINE1)
On a row beneath this i have combobox2, textbox12, textbox14, textbox15 and label 10 (I shall call LINE2)
I need a way of finding the first empty row on sheet 1 (easy bit) and then putting the info from the HEADER and LINE1 in the first empty row, then HEADER and LINE2 in the next empty row etc etc. There are 5 rows in total
I have a workbook with over 900 worksheets.
The macro I have is looping all sheets looking for empty cells in a specific column, and when it founds an empty cell the value for one cell is copied to the empty cell.
But in one worksheet it stops with the error:
Run-time error '1004'
Application-defined or object-defined error
It is about finding the number of unique items in a range that contains empty cells.I can intuit the form of this:
Formula:
[Code]....
And many of the variations of it when there are no empty cells in the range.
For a range of that contains empty cells I've tried this:
Formula: [Code] .....
And variations of it. It does not work, and I don't know why...............however..........
I ran across this on another [SOLVED] thread and it does work:
Formula: [Code] .....
I would have never considered this plausible. What is the magic behind appending an empty string to the criteria in the COUNTIF function?
It strikes me that this strategy likely has application elsewhere, too.
Here find the excel file
My requirement
1) 4 values contains in each row based on the values from those cells the max value will display.
2) if more than 2 cells have empty,NR or NA text means the entire row has to delete.
3) if 2 or more that means 3 cells having values the empty cell,NR or NA cell will place value with the condition of macro that is 75% of other values which is maximum among them.
I am looking to find all visible cells in column E that are blank, and then add ''B'' to those empty cells.
I am using code similar to the below:
[Code] .....
I have a long range of cells (U3:AX3), all of which are empty save one. Is there a way to search through the range of cells, and return the contents of the one cell that contains text?
I would do this with a series of nested IF statements if there weren't more than 30 of them!
Is a Cell with a formula (like shown below) considered true, or is it empty?
=IF(Scorecard!$B$13,Scorecard!$AD$4,"")
If Scorecard!$B$13 was False...
Would a cell with the above formula be considered?
True or Empty?
If Scorecard!$B$13 was True...
A cell with the above formula would be True.
IF cell(some cell) empty AND cell(Diferent cell) not empty then Put Formula in empty cell
Next (to go throught the cells because the range constantly changes with every new report)
When I look at the cell: wsEmpRec.Cells(10,50).Value in the VBA Watch window the value is Empty. I mean, that's the actual word that shows up. I'm trying to test if there is a value in the cell but when I use: if wsEmpRec.Cells(10,50).Value = "" then the condition is not being met. How can I test for an Empty cell as opposed to a cell that contains an empty string?
View 9 Replies View RelatedI am trying to populate the 2 tables from excel to word. I will be getting the excel file with tables in various sheets. One sheet consist of 2 tables that will be inserted to one word document. So if there are 2 sheets then I will have the tables inserted in the 2 word document. In the excel sheet I have attached, there are 2 sheets with tables in each of them. I have written the code to copy and paste the table to word doc from (general) range A1:G4 (Table 1) and A9:H18 (Table 2) that has empty rows and columns selected. But there are empty rows and columns inserted since the table range is not same sheetwise. I would like get the empty rows and columns deleted in the word table.
Find the attached sample excel sheet and the word documents.
DeleteEmptyRows(Sample).xlsx
Sheet1.doc
Sheet2.doc
I am getting values for my excel sheet from another department excel sheet . everything works fine. If there is no values in the rows in the Department sheet, then i need to hide the rows in my sheet. How to code this in VBA. When they add values to the rows then i should make the rows visble here. Kindy give me a sample of vba code to this or suggest me to solve.
View 9 Replies View RelatedIs this possible using code: Copy Cell A1 and Paste in first empty Cell down Column D. This would be connected to a command button. Both Cell A1 and Column D are on the same spreadsheet.
View 3 Replies View RelatedLooking for a formula (not macro) that can do the following:
I have a spreadsheet and in one column, it has last names of clients. In the next column, it has full names of clients that are the same account, but different system with different descriptions for the name. I need to lookup the column that just has last name and see if that last name exist anywhere in the "Full name" column. If it does, then I need column C to say "Yes" or something along those lines.
The "full name" column isn't always in the same format and sometimes doesn't even contain the "last name." Sometimes the last name will be first and sometimes there's a comma and sometimes there isn't a comma. The spreadsheet attached shows a good short example of what I'm working with...
Name Spreadsheet Ex.xlsx
I am creating a macro to automate data analysis for work, but I've become stuck.
I need to find the coordinate of the first cell in a column with word "reserved" or "extended" contained in the cell, and then assign the row number of that coordinate as a variable to use for moving data around. Basically, I want something like VLOOKUP, but instead of returning a value, I want it to return the coordinate.
I'm trying to create a tag with a color border. What I desire is to fill the BLANK cells around the tag, A1:D1 + D1:D19 + A1:D19 + A1:19 in a certain color based on the text value of the cell B11. There are 5 different values, such that if the B11 read Red Sox - the boarder is going to be red, if it reads Houston Astros it will be dark blue, etc..
I have a similar problem with changing the color of the cell based on the month. So regardless of the year, 2014, 2015, 2016, etc... If I use MONTH() function I can just get numbers from 1-12. I want Cell C16-C18 to be certain color depending the date entered in cell C17 such that for each quarter, months 1-3, 4-6, 7-9, 10-12 they are different color.
I have had no luck with conditional formatting (and I also believe that it is good up to 3 cases only). I am decent in logic/programming language but have little knowledge with macro notation and especially how to run them in excel 2013. I do know how to start it alt+F11 and that I need to make sure that code is written under the specific sheet where my tag is located.
I've got a range of data in Column D approx 50,000 rows long and I need to go down this range and when theres a blank cell copy the info from the cell above. I've got some code which loops through this but I need to make sure I put "EOF and the bottom of the info to stop the loop. Is there a slicker way of writing this code?
Code:
Sub TestBlankCell()
Range("D5").Select
Do
[Code].....
I am using a worksheet to scan or enter students into a school event and determine their eligibility to participate in the event. Everything is working great but I need to do the following on Enter Student button click:
1) Cut scanned value (ID number) from input Cell A1
2) Paste value into next empty cell in column A (Rows build as students are inputted)
3) Copy Eligibility status (text) from column F into A6
I have a limited VBA/Macro background and have NEVER got a button to work.
How to format a cell to be normal color unless cell left of it is not empty and this cell is empty.
And I need to format whole sheet to this rule.
Is it possible to make a cell "really" blank/empty based on an If statement? For instance:
=if(a1>10,a1,"")
Has a value_if_false of "". But Excel interprets this a bit differently than a cell that never had anything typed into it.
So if you have a column full of this formula copied down, and hit <control+down arrow>, you will go straight to the bottom and skip over all rows. Whereas if you have a column with values and empty cells alternating and hit <control+down arrow>, you will only skip the empty cells and go to the next value. Excel treats the conditionally empty cells as if they have a value, when it comes to this type of navigation. This holds even if you copy and paste "Values" for the cells over the formulas.
Is there any way to tell Excel to make the cells truly empty?