[Code].....
In the file I have attached, this code works great taking information that has a value greater than zero from Sheet2 and putting it onto Sheet3. I tried to use this code to take information from Sheet1 from different cells than Sheet2 and also put it onto Sheet3, but I can not get the code to do anything.
Example.xlsm
I have 5 Sheets titles Quote 1, Quote 2, Quote 3, Quote 4, and Quote 5, and One Sheet called DataQuote. There s a qty column on all 5 Quotesheets at D7:D62. So that if i was to put a numerical value in that column From any of those sheets I need to Put on the DataQuote the Following:
Say i Have a quanity 5 on quote 3 on cell D9.
On the Data sheet I need to Show in A10 The Name of the Sheet, then stuff from Quote 3 A9:F9 in C10:H10.
alternatively if i went back and put something on Quote 1 Put those values in the above range moving down stuff from quote three, automatically updating itself.
Basically what I need is to find a row (I'm doing it by matching the row title that is 'BALANCE'), then I need to find the max value in this row (the problem I'm having is that the row number is not constant), copy that value in another cell and copy the name, that is located in the same column, next to the previous copied value.
View 2 Replies View RelatedI have 2 sheets and i have a date which is common in both
In sheet 1 I want to find a date in column A17:A23 (it will always be rows 17 to 23) and then copy column C, E, G
I then want to find the same date in Sheet 2 column A (The date could be on any row in Column A) and paste the value in column S, T,U
I have a Sheet in which the data is calculated by changing the Sheet reference and also by the period..
Now I need to transfer this data as values, however there are certail cells which are merged and therefore I get a prompt as I cannot paste as values using Paste Special-> Values..
I have been searching through the forums for examples and haven't been able to find exactly what I am looking for.
Ok here is my issue. I need to compare the Conf # and line number on both sheet 1 and 2. So basically if the Conf # and the Line number match between page 1 and 2 then it copies the Conf #, Item Number(Sheet 1), and Detail(Sheet 2) to sheet 3 in a row. This needs to continue till the end of the Sheet 1. I have a pseudo report created with no code because I don't have a clue as to where to start.
I'm trying to copy a certain cell range from a particular row of a pivot table to another sheet, in a loop but I do not successfully do the paste. There's no error, just no data gets pasted.
In my code currently i have:
Code:
Set Report = ActiveWorkbook.Sheets("Report")
Set Pivot = ActiveWorkbook.Sheets("Pivot").PivotTables(1)
dim size = Pivot.TableRange2.Rows.Count
for i =2 to size -1
Set currentRow = Pivot.TableRange2.Rows(i)
currentRow.Range(currentRow.Cells(1, 2), currentRow.Cells(1, 7)).Copy
Sheets("Report").Activate
ActiveSheet.Range("C" & 4 + i & ":H" & 4+ i).Select
Selection.Paste
next
Now, what does work if i select and paste the whole pivot row, but i don't want this. I've tried also with just referencing the Pivot table cells but also pasted nothing.
I have a sheet named "original" with columns a, b, c. My code checks each cell in column C for a value and then copys columns A,B,C to a sheet named "Order". It works fine except I need it to start pasting the results in row 16 instead of row
Sub PLACEORDER()
Dim lastrow_first As Long
Dim lastrow_second As Long
Dim x As Long
lastrow_first = Sheets("ORIGINAL").Cells(Rows.Count, "C").End(xlUp).Row
For x = 10 To lastrow_first
If Sheets("ORIGINAL").Cells(x, 3) <> "" Or Not IsEmpty(Sheets("ORIGINAL").Cells(x, 3)) Then................
In my userform I have a lot of textboxes. When the user clicks "OK" the values of these textboxes are transfered to row 3 of sheet1.
For this I use some of the code below:
Code:
If NaamTextBox.Value = "" Then ActiveCell.FormulaR1C1 = " " Else: ActiveCell.FormulaR1C1 = NaamTextBox.Value
ActiveCell.Offset(0, 2).Range("A1").Select
If GroepComboBox.Value = "" Then ActiveCell.FormulaR1C1 = "" Else: ActiveCell.FormulaR1C1 = GroepComboBox.Value
ActiveCell.Offset(0, 1).Range("A1").Select
If TypeTextBox.Value = "" Then ActiveCell.FormulaR1C1 = " " Else: ActiveCell.FormulaR1C1 = TypeTextBox.Value
ActiveCell.Offset(0, 3).Range("A1").Select
If TypecodeTextBox.Value = "" Then ActiveCell.FormulaR1C1 = " " Else: ActiveCell.FormulaR1C1 = TypecodeTextBox.Value
This goes on for about 55 columns. Also, not every column is used as you can see in de code above.
It seems to me that this is not smart coding, so my question is: can you make this more efficient?
I did find some nice code with uses EmptyRow (find first empty row) but in my case it's always row 3 where de input is placed. After this row follows much more data.
I have a Sheet in which the data is calculated by changing the Sheet reference and also by the period..
Now I need to transfer this data as values, however there are certail cells which are merged and therefore I get a prompt as I cannot paste as values using Paste Special-> Values..
I need to copy specific rows that have a specific value in colum B and Colum M to new worksheets.
So from below attached screenshot , say for an example macro shud filter rows that have "BigPond" in coloum B ,"RG2" in column M & "INT" in column W and i dont want all cells in these rows , i only want copy cells under column C,AK,AL,AM (in this order) to my other excel sheet that is named "BigPond" and it should paste it starting from Row5.
I want to avoid recording a macro as it selects a range and i am expecting more new rows every week so if a record a macro the cell range for selection changes and i get incorrect result.
Hi, sorry for posting this twice but i wasn't sure which category it fell under!
I have a slight problem with excel and and was wondering if anyone can help.
I have 3 columns, A, B, C: .....
I have a worksheet with a various data in column B.
1/ I want to search column B one row at a time looking for a string value of 'Town'.
2/ When the first row containing this string is found select a left 35 chars substring of the value in the column C and copy this down in column A if the value in Column B = '0000/00' UNTIL the string value of 'Town' changes
3/ Repeat 2/ until the last instance of 'Town' has been processed.
4/ Column A will have some empty cells where Town has not been populated. These rows should be deleted and replaced with one empty row between each change of Town value
3/ Continue pasting this string value into each successive row
I want to copy the current region on sheet 3 and paste that into sheet2 starting with cell E4. But I don't want to actually use the copy method. I believe there is a way to do this. I was thinking the following:
[Code] ......
The idea I had was to simply state that cell E4 would be assigned the value of CurrentRegion on sheet 3. Is there a way to bypass the copy method?
If not, how to copy, then paste?
Right now I have multiple sheets each with a single (different) image floating on top of the cells as all images do in excel.
What I would like to achieve is when a certain sheet is activated, the code finds the image on that sheet and then copies it to the clipboard. What would be a way to go about this?
I have done some research trying to understand how images are referenced in excel.
I have the following code which works but only fills down one row and I want it to fill down to the last row but I cannot work it out.
Dim Col As Range
For Each Col In Range("L:Q").Columns
With Cells(Rows.Count, Col.Column).End(xlUp)
.Offset(1).Formula = .Formula
.Resize(2).FillDown
End With
Next
How to get it to copy down to the last cell in all the columns.
HKDDSHH
31-Jan-13
HUS
8
8
8
0
-896.469
637.037
-636.555
-895.987
January
2013
Comp
-112.059
Thursday
Midweek
[Code] ........
I want to do a loop where you can copy say A3 worksheet 1 then add another sheet naming the work sheet "A3" then copying A3 worksheet 1 to A1 "A3". After that looping to A4 to a new work sheet naming the work sheet "A4"copying the value to A1 "A4", etc...
Is there a simply way of doing this loop? I can probably fit my other coding into the structure.
I have a huge sheet with data. I want to fix all values exceeding e.g. 2000 to 2000.
for instance:
400 --> 400
1600 --> 1600
2300 --> 2000
700 --> 700
3100 --> 2000
etc.
In columns A and B, I have a list of time values. Format: [h]:mm:ss. Column C is B-A. Last row of Column C is the sum of all time values of column C. Sometimes A>B, or either A or B is blank. In such casescorresponding C value becomes ##### (negative date and time) And hence sum of all C values which is in last row of C becomes ####.
View 2 Replies View RelatedI want to look to a range and if there is a value greater than zero I want to count it. I keep going round in circles trying to do this and now I give up.
View 4 Replies View RelatedI want to replace all numbers in the worksheet which are greater than 200 with 200. I mean all numbers greater than 200 should be set to 200. values are not all in the same column or same row, they are spread throughout the worksheet. I tried using the Find and Replace, but it can replace only a specified value with only another specified value. I want to use some kind of a filter which will choose all numbers greater than 200, and make them 200.
View 8 Replies View RelatedI'm trying to sum all values greater than 5,000,00 and less than or equal to 10,000,000. I have this formula:
Code:
=SUMIFS(B6:B1359,B6:B1359,">"&L2,B6:B1359,"=
Members in our club enter competitions each month and receive scores. I want to be able to average the top five scores from the last ten competitions each member entered, keeping in mind that not all members enter all competitions and will score 0 in this situation.
Its easy if members enter every competition, but I want a formula that will work also for when members may only enter 10 of the last say 15 competitions and I still need to find the average of the top 5 scores.
Member Name is in A1, and then scores are in A2-A25.
I have a column of values. If a row's value is greater than 0, I want to count it as a value of 100 and add the result. I can get this far: =SUMIF(H11:H12,">0")
...but I don't understand what would come next. What I am trying to do is to use the above formula to total the actual sum of an array and then to also create a second column which assigns a maximum value total based on each row's non-zero result being worth up to 100. Using the above formula as a reference again, the formula that I am seeking would return a total value of 200 if both H11 and H12 contained any value greater than 0. I plan to use these two results then to calc a percentage.
I am using vlookup to read a 3500 from the table below.
"Vd =65mph
R(ft)"e
126001.5
91302.0
82002.2
74302.4
67702.6
62002.8
57103.0
52803.2
48903.4
45403.6.......
My question is how do I write the formula so that it looks up a radius of 3500 by looking up a value slightly smaller than 3500, in this case 3440 and return the value of 4.4
I am trying the sumproduct funtion,but getting #value error.I only want to sum up values greater than zero,omiting blanks,formulas
View 9 Replies View RelatedI have 2 sheets, i need to transfer every cell value criteria >0 from sheet2 to sheet1. See the code below
Sub datatransfer()
Dim rngqty As Range
Dim nextcell As Range
Set nextcell = Sheet1.Cells(Sheet1.Rows.Count, 1).End(xlUp).Offset(1, 0)
Sheets("Reqorder").Activate
For Each rngqty In Sheets("Reqorder").Range("c4", "n57")
Do While rngqty>0
Cells(rngqty.Row, 1).Copy
nextcell.PasteSpecial (xlPasteValues)
Cells(1, rngqty.Column).Copy
nextcell.Offset(0, 1).PasteSpecial (xlPasteValues)
rngqty.Copy
nextcell.Offset(0, 2).PasteSpecial (xlPasteValues)
Loop
Next rngqty
End Sub
I am creating a spreadsheet that allocates hours to different categories of work - for example, "Fire Protection". I need the allocated hours for all of the different Fire Protection duties to only show up when a value greater than zero is entered in the column at the top of this category entitled "Fire Protection". If "Fire Protection" has a value of zero, then all fire protection-related duties will automatically be zero as well - in effect, this category of hours is nullified.
View 1 Replies View RelatedI want to divide the numbers from 2 cells, down a long column. Let's further say that in some instances there aren't any numbers in either of the cells. You get a divide by zero error.
So you have values in a1 and b1 through a10 and b10. You want to divide the value in the a column by the value in the b column and return the answer in the adjacent c column. You've copied the formula all the way down to c20.
All the cells from c11 to c20 will have divide by zero errors.
What is the syntax to check if both cells in columns a and b are greater than zero so that either an answer will be returned or just a blank cell will result, (when nothing is in one of the cells from a or b?
The following formula works for checking the status of cell A, how do I also check the value in cell B?
=(IF(A5>0,A5/B5,""))
something like?:
=(IF(A5>0 and B5>0,A5/B5,""))
I have two columns A and B. I need a count of how many times a value in B is greater than the same row in A. I don't want to insert a new column (e.g. for if statements to add up).
Can I insert a countif at the top to do that? I tried various countif variations but could not find the right one. Additionally any other option that does not involve adding new columns/rows.
