Excel 2003 :: Finding First Empty Cell In The Sheet?
Nov 8, 2011
I have two work sheets where I have data.
Sheet1 contain daily input table which as follows:
Sheet2 have table where all the information is saved. So we can say this is database of sheet1. Which store every day information of sheet 1.
SALARY DATABASEMonth Name Salary Bonus
I want that when I finished writing on the sheet 1(which i do manually) then with macro it go the sheet 2 and find first empty cell in the name column and past the all the data of sheet1 table. Months I will put manually. I am working on MS2003.
I'm stuck using Excel 2003 to auto-populate a cell.
I have a range of dates in five consecutive columns called:
Phase 1, Phase 2, Phase 3, Phase 4 and Phase 5
I enter the date that 'Phase 1' starts under the first header. Once Phase 2 starts I enter a date under 'Phase 2', and so on to Phase 5.
Each phase is consecutive to the next so will always be filled in from 1 to 5.
I want to create an additional column called 'Status' that shows the Column Title of the last phase with a date in it. For example, if Phase 1 to 3 had dates but 4 & 5 were blank, "Phase 3" would be displayed in the 'Status' column.
I've tried nesting some ISBLANK functions without any luck.
I have two Sheets, first is Service Data, the second is Log Sheet. In the Service Data sheet I have a column of serial numbers in column A. I also have a column of serial numbers in the Log Sheet, column A.
I'm looking for a conditional format whereas I enter numbers into column A on the Log sheet it will auto highlight the cell if I duplicate a serial number from row A in the Service Data sheet. I would like it to highlight the Duplicated number on the Log sheet. I know new versions of excel make it easier to do this but unfortunately I have Excel 2003.
I have a userform that has Label 1, textbox1 and textbox2 at the top. (I shall call it HEADER)
Then, arranged in a row i have combobox1, textbox4, textbox6, textbox7 and label7 (I shall call LINE1)
On a row beneath this i have combobox2, textbox12, textbox14, textbox15 and label 10 (I shall call LINE2)
I need a way of finding the first empty row on sheet 1 (easy bit) and then putting the info from the HEADER and LINE1 in the first empty row, then HEADER and LINE2 in the next empty row etc etc. There are 5 rows in total
Using excel 2003, Workbook has several sheets, all sheets are protected workbook is not. I have my cells containing formulas locked, I have unlocked the other cells that require input of various data. When the user goes to type in a "unlocked" cell, (to over write the now obsolete data) it will not allow the user to delete the data, the curser remains a cross and the formula bar or the cell itself will now allow any changes.
I have double checked that the cells are unlocked. I can enter data after the last entry in the unlocked row and or column, but I want to be able to "cut or delete the data that is no longer need and begin entering data from the beginning cell of choice. I want to copy this "old" data to an archive sheet, but it will now allow me to select it.
Example: I have 6 columns starting, (a to f) the formulas are in columns e and f and start at row 4 These columns are locked and hidden. Columns a,b,c and d are unlocked for user input. All data is started from A5 which I want it to start from each time the old data is deleted and new data entered. If I place my curser on any of the cells in the e and f rows, the cursor remains a cross which is what I expect it to do, but columns a to d are doing the same thing, they are acting as if they are locked OR atleast those cells in the a to d areas which have existing data, as I can enter below.
I want to use VBA to find the first empty cell in a colum. But I want VBA to start look for this empty cell after cell B10 and not from the top of the colum. I also want that the VBA stop looking after cell B20. The last part I already have (see below) but I don't know how to have VBA to start the search in cell B10 and not in the top.
I am trying to write a macro that looks for the first empty cell in column G, Then once that cell if found, assigns that row to be the row that other data is copied and pasted to. My code currently just finds the first empty cell in each column and copies and pastes the data and am not sure how to get it to what i need it to do.
Code: Sub seconddatatransfer() Dim wb1 As Workbook, wb2 As Workbook, sh1 As Worksheet, sh2 As Worksheet Set wb1 = Workbooks("filestransfer.xlsm") 'Edit file extension Set wb2 = Workbooks("KBCG.xlsm") 'Edit file extension Set sh1 = wb1.ActiveSheet Set sh2 = wb2.Sheets("Tracking Sheet") sh2.Cells(Rows.Count, 2).End(xlUp)(2).Value = sh1.Range("B6").Value 'left
We have a huge excel-sheet, containing disputes with customers. Everytime there is a dispute, the customers data will be transferred into the sheet. The sheet is organized like this:
DATE / NAME / ID / COMMENT / FREQUENCY (how often one customer appears in the list) /ID2 (ID combination of the date + ID) /Weekday
And here comes the task:
Find all customers who appear 10 work-days(Mo-Fr) in a row. So if a customer appears Mo-Fr and keeps on being in the list the next Monday etc. it still counts as "in a row". Same with official holidays. If a customer appears at a certain date he is "booked" and it doesnt matter if a appears a second time on that specific date.
Attached to this post you find an example in which you can see the structure of my excel sheet!
Note: I had to use a german version of excel when I made this little example - thats why the formula in the collum "Frequency" says "Zahlenwenn" its the german version of COUNTIF
I am using Win XP Pro, Excel 2003. In the workbook, I have a invoice spread sheet (lets call it sheet1) to create invoices. Once the invoice is completed, I save it with this macro which saves it to the contents of E3 and E7 for the file name:'
Sub SaveMeExtraQUOTE() Application.DisplayAlerts = False ' Dialog's Title strTitle = ""My Tite"" If MsgBox("WARNING !! STOP! Enter ALL your quotes information to be saved BEFORE saving the file!!!
This is working just fine BUT it keeps saving it to a template file where the master template is kept. Why will it NOT save it to the QUOTES folder when I am using this:
Filename:="C:EXCELATX Concrete DesignQUOTES"
I am also trying to have a space between the contents of cell E3 and E7 when the file name is saved. Now it just puts them together.
My spreadsheet has multiple lines of data for multiple items (have a specific item #) and I need to be able to enter an item # on a different sheet so that the requested information can be pulled from the data source. The items have information on multiple rows. I need to have all of the rows pulled into my output file when I specify the specific item. #.
I have attached a spreadsheet showing the type of data is contained and what my desired output would look like.
I have been given an excel model to review;the workbook has 53 sheets. I would like to know if there is a way to create a flowchart/matrix with the relation of all the sheets. I would like at least to get a list of all the sheets related to each sheet. All what I was able to do is to get all the sheet names in one sheet. (I am using Excel 2003).
I wanted to know if it was possible for me to be able to copy a whole row into a different sheet based on a column value. For example, if B6 = CLOSE, the whole row would be coppied to the sheet name CLOSE. If B6 = OCCUPIED it would be copied to sheet name OCCUPIED. I also need if W7 = to a date thats passed today it would be added to the sheet name EXP PRD. An off topic question, i have this code for column "W":
It works just fine, but I also have "N/A" / "INDEF" in the blocks as well so it's not giving me the correct results. I'm using Excel 2003.
(EXCEL 2003)I have 6 worksheets for 6 separate ad reps that will be populated with customer info. To make my life simple I just want column A from each of the 6 worksheets to show up on a master sheet in column A. But what also needs to happen is if we add and delete customers that also needs to happen on the master. I understand the "=" and then pointing to a cell in another sheet and hitting enter. I got that to work but I just have soooo many cells to work with that would just be way too time consuming.
I have sheet containing a schedule of data. It is a record of changes on a project, each change is sequentially numbered and contains a row of data (date of change, whether approved, cost of change etc). Each change is given a cost centre reference (1 of 10 cost centres are being used) depending on the type of change being made.
I need to keep that record of the overall schedule of changes but I also want to extract each of the cost centre categories into a sub table on the sheet to give a schedule of changes against each category.
I have almost achieved what I want but one method leaves blanks in the sub table which I want to avoid and the other method I used to remove the blank lines but needs the first method sheet calculated before it then goes to work and seems rather cumbersome and I suspect there is a much easier method. (I also want it to be compatible with excel 2003 so it can be used across several platforms.)
I have an excel file (2003 version) with one sheet called sheet1.
On sheet1 I have multiple text boxes, however each text box has the same text box number "Text Box 1244" (this number appears in the top left-hand side in excel when I click the textbox).
I was wondering if it's possible to rename the text boxes based on their location on the sheet.
Eg. If i had a sheet with 5 rows of text boxes and 3 columns of text boxes (15 text boxes in total).
The top left-hand box gets renamed to "Text Box 1", then the text box below that gets renamed to "Text Box 2" and so on to the bottom of the sheet to "Text Box 5". Then the vba script would move to the text box that was to the right of the first text box (1st row again but 2nd column), and rename all the text boxes in that column ("Text Box 6" onward).
I used to use Excel many many years ago for all my basic business databases and pivot table reports (so was at a basic competency level) and want to use it again but it has been quite a while and I can't remember how to do the following.....
I want to build a database of sales and purchase info in say 'sheet 1' - let's say 30 different headed columns and then many lines of different information under each column.
In 'sheet 2' I want to create an invoice template of my own design (I can do easily) for printing.
This template will need to extract say 10 bits of information from a particular row and then put them in a certain place on this sheet.
How can I type in one piece of information in a cell on sheet 2 (say the invoice or line number of the database) and that will then trigger all the other needed information from that particular line in sheet one onto this template?
I know it can be done but for life of me can not remember the formulas to use for these other cells in sheet 2 based on the info put in that one 'trigger' cell
I'm working on a dynamic payroll spreadsheet that will automatically calculate the overtime worked in a week. Right now, I'm running into a snag. My issue is with the formula in Column R. Right now, as shown below, it is doing the calculation based on regular hours minus 40 to determine the OT time. The snag is very messy and it lay in this: while the row by row calculations for total overtime worked for the week is correct, the sum at the bottom is very much off. I need an accurate method to sum the hours of overtime for the given column.
Here are the guidelines for the pay periods and overtime:
1. The pay periods for the month go from the 1st to the 15th and the 16th to EOM (End of Month). This means that the pay period could end on any given day of the week. More on this in a moment.
2. A work week is defined as Sunday to Saturday.
3. Overtime is calculated based on the rule of anything over 40 hours in a given work week.
4. Holiday hours worked do not count towards the 40 hour mark in granting overtime since Holiday pay is automatically overtime.
If it were just a matter of a bi-weekly (every 2 weeks) pay period, I would simply state =IF(weekday(DATE)=7,Hours_Worked - 40,0), and tag a SUM(range) at the bottom. Unfortunately, with it being a semi-monthly (twice a month), the end of the pay period could be a Wednesday, so a reference to day of the week won't work unless the formula can dynamically determine which set of data to evaluate.
I'm completely willing to toss out the current method of determining overtime. This is the calculations sheet that references a cleanly formatted and designed time card on a tab called "Time Card", so this isn't the full workbook. In fact, once the whole thing is done, this calculation sheet will be hidden.
Columns M and N (which are formula referenced in Column P) are basic End - Start calculations and were hidden to simplify the display as well as the number of formulas displayed.
Column L (formula referenced) is a Yes/No display for if the date in question is holiday pay.
I need to match data in cell A to cell B and then if they equal I need to copy the adjacent cell C to cell X . How do I set up a macro to do this automatically? I have over 5000 cells to compare and match up.. I have Office 2003.
I can put the Data in F21, but then I need to skip a cell and put the next Data in H21 and so on, the cells are in yellow that I need to string out the data in. so every time I open the form the data skips a cell.