For Next Loop Not Stopping After Final Item
Jan 21, 2012
I've modified some code to perform a loop which creates a new worksheet for each item in a pivot table Page By field (EmpName), copying and pasting values for the displayed pivot table with each name selected. Everything is working fine until it gets done with the last item in the list, at which point I get a Run Time Error 1004, "Unable to Get Properties of the Worksheet Class".
I want the MsgBox to pop up at the end, stating how many sheets have been added.
Sub Loop_PivotItems()
'Turn off screen updating
Application.ScreenUpdating = False
'Store the sheet with the Pivot Table
Piv_Sht = ActiveSheet.Name
'Loop through every PivotItem in the PageField (Filter) of the Pivot Table
[Code] ...........
View 2 Replies
ADVERTISEMENT
Jul 12, 2006
how to quit this Do and For loop:
This simple coding should repeat this four times:
first ask user to input data in Textbox2.Text and then Textbox3.Text until user presses Cancel. --> x 4
But it don't seem to exit the Do Loop
For j = 1 To 4
i = 1
Data1 = TextBox2.Text
Cells(i, j).Value = Data1
Do
n2 = TextBox3.Text
If Cells(i, j).Value <> "" Then
Do
i = i + 1
Loop Until Cells(i, j).Value = ""
End If
View 7 Replies
View Related
Oct 4, 2009
I have written the macro;
Sub
For i = 2 To FinalRow
If Cells(i, 1).Value = Range("A1") Then
Cells(i, 1).Select
End If
Next i
End Sub
And I was wondering if there was a way to end the Sub as soon as it gets to the Cell with the “A1” value in it as opposed to just continuing through all the rows to the end of the sheet even after the right value has been found?
View 9 Replies
View Related
Dec 21, 2006
I have the following VBA in the attatched spreadsheet (seperated so I could upload)
The only problem that I have is that I cannot stop the loop, it constantly keeps going round in a circle.
What im wanting to do is when the Date checked is the End date and the End Time has been checked, to move onto the next row and do it again until it gets to row 40.
Sub Calculate()
Dim CellNo As Integer
Dim CurrentDate As Date
Dim StartDate As Date
Dim EndDate As Date
Dim theDate As String
Dim c As Range
Dim i As Integer
Dim addDate As Integer
Dim DaysHoursSick As Date
Dim StartWorkTime As Date
Dim EndWorkTime As Date
Dim endmarker As String
I've only got this VBA working really under Wednesday so I can make sure it is right before adding it onto the other dates,
View 4 Replies
View Related
Jan 16, 2014
I'm currently running this macro:
VB:
Sub CopyNextTab()
WorkbookName = ActiveWorkbook.Name
Cells.Select
[Code]....
I'm not entirely sure if this is correct, but what I'm looking to do is the following:
1. On the currently selected sheet, copy all data into the "Pasted Data" sheet on "Test.xlsm"
2. On the "Calculations sheet", copy all information across to the next available row on "Master Sheet"
3. Select the original Workbook and move to the next tab
4. Repeat until there are no more tabs remaining
So far as I can tell steps 1-3 are working (however I'm not entirely confident with my code to move to the next sheet as I'm not sure it will end the sub on the last sheet).
View 5 Replies
View Related
Nov 5, 2012
I would like to perform an operation on each filtered range. To do this I need some kind of loop which would enable each item in the auto filler. I dont know how to do this. The loop i need is to enable one item, do operation (ex sum of visible rows --> i already have a code for that) then disable that currently visible range and enable next one, perform sum operation again.
View 1 Replies
View Related
Oct 8, 2008
I’m getting data from query. My data has fields: Item No, Customer ID & Sales rep.
I need to find out for each Item number which customer put order and who was the sales rep. (Excel 2002). see file attached.
View 4 Replies
View Related
Jan 7, 2014
I'm not grasping the Pivot Table correctly. I've written code to create a sum of values based on a worksheet. Specifically:LocationIDDeptSum of Hours Worked. Location, ID and Dept are rows. This effectively provides the aggregate values that I need based on the row groupings.Here's where this is falling apart. I need to create a new worksheet based on these values. I assumed the three row values - Location, ID and dept - would be in a hierarchy. It's possible they are, I just can't figure out the object model.
When I loop through the PivotItems collection of the PivotFields("Location"), I get what I need. However, I'm unable to determine how to loop through the child values (just for that location). PivotFields("ID") returns all IDs. I can't figure out how to return only the child entries for each pivot item. GetPivotData hasn't been very useful for this. As far as I can tell, GetPivotData, while its return type is listed as Range, throws an error when more than one cell is returned. Worst case, I suppose I can just parse the data in the DataBodyRange of the pivot table - maybe not, I haven't tried that. I'm hoping there's a way to iterate through these collections, but based on what I've seen from Google searches, there may not be. Does my pivot table need to be rearranged? I suppose I could also just dump this data into a data table
View 1 Replies
View Related
Feb 16, 2013
Excel Userform
VB:
'enables user to click [U]highlight and select[/U] an item in ListBox1 and ListBox2 item (same row in index) is also [U]highlighted[/U] (highlighted only not selected)
Private Sub ListBox1_Click()
ListBox2.ListIndex = ListBox1.ListIndex
End Sub
Question: Is it also possible to enable a user to click to select an item in ListBox1 and ListBox2 item is also selected simultaneously (same row in index). Is there excel vb code to do this?
I think the code may be along the lines of the ListBox SelectedIndex property. What would be the Excel VB code equivilant for the ListBox SelectedIndex property, if so?
View 8 Replies
View Related
May 20, 2014
numberdesc
1_______yellow
1_______yellow
1_______blue
2_______purple
2_______purple
3_______green
3_______orange
4_______black
I need some way that can identify when the item in the description column doesnt match the first item of the same number- for example, here the 1-blue and 3-orange would be flagged because they should match the 1-yellow and 3-green.
I need to do this on a much larger scale (approximately 20,000 data points), so I wanted to create a formula or macro that could do this for me.. I thought making a reference page with would work but I keep getting an error.. I haven't done VBA in a while, so I may have syntax errors.
If Range("A2:A9").Sheets("Sheet1") = Range("A2:A6").Sheets("Ref") And Range("B2:B9").Sheets("Sheet1") = Range("B2:B6").Sheets("Ref") Then
Range("C2:C9").Sheets("Sheet1") = "x"
End If
View 2 Replies
View Related
Jun 14, 2014
I am getting close to finishing the drop down menu capability when filling in column L in tab Transactions. However, there is a snag. When I enter part of account say "fin" (the important part here is that the part of the word should not be the beginning of the account name) - then I select an account from the menu - but it does not stay in the cell if the part of the name is the beginning of the account name - all is fine.
View 4 Replies
View Related
Jun 14, 2012
I need to cut and move data in a worksheet where the bottom always changes. The header row should stay in worksheet 1 and row 2 down to the bottom needs to be cut and moved to worksheet 2. One time it could be 100 rows and the next time a thousand or more.
View 5 Replies
View Related
Feb 12, 2009
I need to do a final ranking for the employees those who have been already ranked on three different segments. And there will be also employees who are not qualified for the ranking in any one of the three different segments. So in the final ranking need to find the final qualified employees who are ranked in all the segments and we need to rank them, and the employees who are not qualified also has to be mentioned.
View 9 Replies
View Related
Jan 31, 2010
I think the title pretty much says it all... Now I have a file I can't send to anyone to do anything with... I've googled a few things but I've found nothing to work with... It was only a few hours worth of work but this seems ridiculous...
View 3 Replies
View Related
Feb 13, 2014
DATE
PRODUCT
BALANCE
1/2
KEY CHAIN
4
1/2
KEY CHAIN
8
1/2
KEY CHAIN
27
[code]....
How to get final figure each product from sample data above:
the result:
Key chain = 27
Gift = 4
Hamper = 1
View 7 Replies
View Related
Mar 26, 2009
Finalrow = Sheets("Sheet1").Cells(Rows.Count, 1).End(xlUp).Row
Finalrow2 = Sheets("Sheet2").Cells(Rows.Count, 1).End(xlUp).Row
I need my "Do until" loop to run until the activecell in sheet1 =finalrow
I tried "Do until activecell.row=Finalrow", however that didn't work because it ended my macro too soon.
I tried "Do until sheets("Sheet1").Activecell.row=Finalrow
But it won't accept that.
View 9 Replies
View Related
Jun 15, 2009
If I have a columns of numbers that vary in length, and can have empty cells between the final value and the formula to pull the number (of varing lengths), what formula can I use to repeat the final value?
For example - here are two columns:
4,800,000
0
46,594
space
space
<formula to pull 46,594>
or
56,000
48,150
36,528..............
View 2 Replies
View Related
Aug 15, 2012
I am attempting to sum the final two values in a list. Each week, I add a new value to the bottom of the list. I would like the formula to calculate only the final two values, and update each week. For example, in Week 1, I would have the values 4,10,12,6 in Cells A1, B1, C1 and D1. The formula would calculate the sum of C1 and D1 = 18.
In Week 2, I would input the value of 15 into Cell E1. I would want the formula to now calculate the sum of D1 and E1 = 18.
View 9 Replies
View Related
Mar 24, 2007
If coded correctly, there are various Excel functions & tricks for creating a formula to send someone on a wild goose chase through many worksheets and cells before finding the final cell that contains the final value. I was able to use =Cell("address",...) function to cut through the many paths and retrieve the address of the final cell. Is there a VBA trick for doing this to the active cell? I would like to be able to run a small VBA routine that would trace back the fomula of the active cell and return the final cell's worksheet and cell address.
View 9 Replies
View Related
Jul 13, 2007
I run a report of varying length that generates times. I need to take the final time from 'Column J' and make that the final value for 'Column U'. 'Column J' has a varying number of entries and the times are not equally spaced out. In 'Column U' I want to go from the start time (which I have referenced from J:2) to the final value in 'Column J' and include every minute in between. Then I need to take the new list of every minute from 'Column U' and make it the x-axis of a bar chart.
View 2 Replies
View Related
Mar 28, 2008
I need to calculate the final balance of a savings account. Thought this could be done using the function FV. However I had not used this function before. Therefore to make sure that I had set up the formula correctly I checked it manually with a small example. The results are set out below. You will see the function FV fails to include the final interest payment. (£2620.32 - £2472.00 =£148.32)
The data to be used will be:
A regular payment of an identical amount on first day of every year.
Compound interest calculated annually and credited to account on final day of every year.
Period of years.
Example of Saving Regular Amount every year at Compound Interest
Using =FV(A1,A2,A3)
Amount of Saving per annum £1,200.00 A1
Rate per Annum 6.00% A2
Period of Years 2.00 A3
£2,472.00
Manual calculation of example:
Payment at start of first year£1200.00
Interest at end of first year 72.00
Balance at end of first year 1272.00
Payment at start of second year £1200.00
Balance at start of second year 2472.00
Interest at end of second year 148.32
Balance at end of second year £2620.32
View 5 Replies
View Related
Mar 22, 2007
In my main macro I have a line that makes it jump into a timer subroutine that starts the main macro every 30 seconds. However, I also have a line in the main macro that makes it jump into another subroutine at 2pm everyday that sends out emails. The problem is that if the timer starts the main macro again before the sending emails subroutine finishes, then it will only finish sending a portion of the emails before it jumps back into the main macro. Is there any way to stop my main macro once it recognizes that it needs to jump into the email sending subroutine, or a way to at least stop the timer subroutine?
the part of my code the jump into the sending emails subroutine and the timer subroutine look like this so far:
If timevalue(now()) >= timevalue("14:00:00") And timevalue(now()) < timevalue("14:00:31") _
Then DAILY_REPORT
End If
StartTimer
View 4 Replies
View Related
Jul 30, 2014
I am having trouble with the final formula for this spreadsheet.
I want to be able to select "Holiday/Sunday" from the drop down men in column H, and have it multiply the total in column F by 2. There is already a formula in column F that sums column E-D.
View 4 Replies
View Related
Mar 4, 2009
I am wanting to create a VB script that will take a number (in general format) of two or three digits, convert it to text, then make sure that there are enough zeros preceeding the number to make exactly 6 digits. Examples of the initial number (before the macro is run) and the final number (after it is run): ..
View 8 Replies
View Related
Oct 8, 2008
I am attempting to check to see if the current week is the end of a period or not. If it is, I need to display some text, and if it is not, I need to display nothing.
Since I am Computer Science major, the best way I can describe this is through and if structure from a low-level programming lanuage (like C++ or Java):
View 2 Replies
View Related
Mar 19, 2013
I am trying to calculate final grades with weighted averages. However for the final grade I need to drop the lowest of the test grade which come after the bold line to the right, making the total relative weight of Tests, the weight of 2 tests. How would I go about calculating that with a SumProduct formula? I do not need to drop grades from B4:K4, however from L4:N4 I need to drop the lowest grade for my final grade, which needs to be rounded to the nearest integer. The relative weight of each assignment is given in Row 1.
View 3 Replies
View Related
Apr 28, 2014
I have a workbook that is titled "Results". It has 2 columns that I need, a 'status' column (B) and a 'finalized date' column (C)
Column B is the 'status' column: Formula: ('[May Database]Summary'!$B$1)
The May Database B1 column is a dropdown with options "In Progress" and "Final" that will be switched manually.
The results workbook pulls it's status from the May Database workbook.
So I need my results workbook to update it's 'finalized date' column (C) when the May database says "Final" but populate and save the day that the May database was manually switched to 'Final'
My question is would this formula work?:
Results workbook status column: C1= IF(B1="Final", Now(), "")
Would this save the date when the May Database was manually switched to 'Final' or will this just update my current day everytime I open this workbook since Now() returns current day? Is there a way to save a date when it was finalized and then keep that date?
View 1 Replies
View Related
Jul 2, 2014
So I have a few hundred spreadsheets with the following structure:
Persson L. S skogsarb Granberg Malung
Persson M R fru
Persson N skogv Sjog 23 Torsby
What I want to do is move/split the ultimate word in every cell in column A to a parallel cell in column B, and then delete the word from column A.
View 9 Replies
View Related
Sep 29, 2009
I have a complex sorting macro with userforms & Modules. Works great! Now I need to save the final Worksheet without the macros. The final step to my project is a Application SaveAs. Can I add a delete-all-macros step when the user clicks the Save As button which would create a new workbook with the finished worksheet and NO macros?
View 9 Replies
View Related
Jan 8, 2009
A good number of years ago I used a line of code at the beginning and the end of a macro to keep the spreadsheet from moving until the macro was finished. At the close it moved if a movement was necessary.
View 6 Replies
View Related
