Flag Item When Doesn't Match Item Above

May 20, 2014

numberdesc
1_______yellow
1_______yellow
1_______blue
2_______purple
2_______purple
3_______green
3_______orange
4_______black

I need some way that can identify when the item in the description column doesnt match the first item of the same number- for example, here the 1-blue and 3-orange would be flagged because they should match the 1-yellow and 3-green.

I need to do this on a much larger scale (approximately 20,000 data points), so I wanted to create a formula or macro that could do this for me.. I thought making a reference page with would work but I keep getting an error.. I haven't done VBA in a while, so I may have syntax errors.

If Range("A2:A9").Sheets("Sheet1") = Range("A2:A6").Sheets("Ref") And Range("B2:B9").Sheets("Sheet1") = Range("B2:B6").Sheets("Ref") Then
Range("C2:C9").Sheets("Sheet1") = "x"
End If

View 2 Replies


ADVERTISEMENT

Click Item In ListBox1 And ListBox2 Item Is Also Selected Simultaneously?

Feb 16, 2013

Excel Userform

VB:
'enables user to click [U]highlight and select[/U] an item in ListBox1 and ListBox2 item (same row in index) is also [U]highlighted[/U] (highlighted only not selected)
Private Sub ListBox1_Click()
ListBox2.ListIndex = ListBox1.ListIndex
End Sub

Question: Is it also possible to enable a user to click to select an item in ListBox1 and ListBox2 item is also selected simultaneously (same row in index). Is there excel vb code to do this?

I think the code may be along the lines of the ListBox SelectedIndex property. What would be the Excel VB code equivilant for the ListBox SelectedIndex property, if so?

View 8 Replies View Related

Selecting Item In Combobox - Item Not Get Selected

Jun 14, 2014

I am getting close to finishing the drop down menu capability when filling in column L in tab Transactions. However, there is a snag. When I enter part of account say "fin" (the important part here is that the part of the word should not be the beginning of the account name) - then I select an account from the menu - but it does not stay in the cell if the part of the name is the beginning of the account name - all is fine.

View 4 Replies View Related

Match An Item In A Row With Another Row?

Mar 25, 2009

how I can match an item in a row with another row?

I have a row of data A2:J2. A persons name could be in any column in that row.

I have another two rows of data where the peoples name and department name appear Where L2:L7 = peoples names
where M2:M7 = peoples department

I want to match a name in A2:J2 with one in L2:L7 and if matched put the department name in K2. Then obiviously i will copy the formular down column K.

View 9 Replies View Related

Nested Dictionary To Match Item?

Oct 17, 2013

I have 2 tables, one on the left and another one the right, I want to check existance of ID and date in table in left, if match then plant the details as below. I manage to do the matching, but the result isn't correct.

Matching.jpg

Download workbook here [URL]

VB:
Sub vk()
Dim err As Worksheet: Set err = Sheets("Sheet1")
Dim a As Object: Set a = CreateObject("Scripting.dictionary")

[Code].....

View 9 Replies View Related

Use Index,match For A Two Item Lookup

Sep 12, 2009

I have used index,match for a two item lookup. But what is the formula for three items?? I have attached a file for an example.

View 2 Replies View Related

Assigning A Category To An Item Number Based On The First Two Characters Of The Item Number

Jun 18, 2008

I am using a vlookup and have a problem. I am assigning a category to an item number based on the first two characters of the item number. For example item number 60123 would equal scrap because of the first two characters of 60. But the item number can begin with either a number or letter. Here is the formula I am using that works for item numbers that begin with numbers:

=VLOOKUP(VALUE(LEFT(E2,2)),Sheet3!A:B,2,FALSE)

It works fine until I reach a item number that begins with a letter, then I get the dreaded #Value error. If I take the value out of the formula then it works for the letter based number items but not for the number based item numbers.

View 9 Replies View Related

Code To Match List Box Item To Record

Feb 1, 2014

I'm looking for click event code for a list box called lbActiveItemList that finds a match for the selected record in Column 1, to the Sheet ReturnData in Column A from row 6 on (using the G column to find the last row). Upon finding a match it should close the userform, and make the G cell for the matching record the Active Cell.

View 7 Replies View Related

Match Listbox Item To Column Entry

Aug 20, 2007

I have managed to set up a dynamic range called "Managers" which is held in a worksheet named "Lists" to validate entries in Col D of a worksheet named "PartTimeStaff" -

I also have 2 userforms which either add or delete managers names from the dynamic range, this all works well.

What I need to do when using the Delete form is to check that the managers name is not selected in any cell of Col D in the "PartTimeStaff" worksheet - this is to ensure the user has reassigned the records to another manager before deleting selected manager on ListBox1within this form.

The code which runs from a command button is below

Private Sub cmbDelete_Click()

Dim i As Integer
Dim SelectionsIndex() As String
Dim ArraySize As Integer
Dim RowToDelete As String

Application.ScreenUpdating = False

With Sheet2
.Visible = True
.Activate
End With

Set ManagerStartRng = Range("A3")

Application.EnableEvents = False

If MsgBox("Are you sure you want to delete this manager?" & vbCr & vbCr & _
"This action cannot be undone!", vbQuestion + vbYesNoCancel, "Confirm Delete") = vbYes Then

View 10 Replies View Related

Match Formula To Item Picked From Dropdown List?

Aug 7, 2014

I have created a drop down list for items we quote on. each item has a different formula depending on the variables on sheet one Sheet1. I have listed the formulas in the column next to the drop down list for each item, but our now need the main quote to put in the formula in another cell when the item is chosen from the drop down list.

View 2 Replies View Related

Match Multiline Textbox Item To Column B3 In Excel

Jun 11, 2014

I have Useform1 & Textbox1 & Textbox2 & CommandButton1

*Textbox1 = Identifier where to put the "X" mark when data is found
*TextBox2 = The User Data 'It is a multiline textbox
*CommandButton1 = Execute the macro
*Excel Column "B3" = Where the textbox2 data will be compared. this one has default data.
*Excel Row 2 = the identifier where to put the "X" mark when the data is found.

The user will enter data in textbox2, For each TextBox2 Value it will be compared in the Data in Column B3 only If the Textbox1 Value found in Row2 which has the codes. Then when the Value is found. it will mark with "X" in the column where the TextBox1 value found. see my screenshot.

Form Screenshot : Capture2.PNG

ExcelSheet Screenshot : Capture1.PNG

Right now I only have this code.

[Code] ....

View 3 Replies View Related

If Formula: Item Number From The Old File Corresponding To The Same Item Descprition In The New File

Nov 20, 2008

Here I would like to get your valued guidance for the usage of "IF" formula. I am having two sheets one is new XL-1 and other is old XL-2. I want to have a item number from the old file corresponding to the same item descprition in the new file. I am attaching the snap shots of two files which is more explanatory than describing in words here.

View 2 Replies View Related

Compare Our Item Number With The Suppliers Item Number?

Dec 18, 2012

I am using Vlookup to compare our item number with the suppliers item number but the result is removing the decimal point on some but not all items.I have included a small sample but it concerns almost 10.000 items.

View 9 Replies View Related

Last Item(s) In A List...

Jan 16, 2009

how I can, in a formulae, identify the last item(s) in a list of values. For example I have data in rows 1-25 with numeric data in. I want to put a formula in, say, row 100 that averages the last three data items above in the same column, but the number of data items will increase over time to use row 26, 27, etc. and I don't want to change the formula in row 100.

View 4 Replies View Related

How To Find STD DEV For Each Item

Apr 25, 2012

I am trying to find the std dev for each items below. I have tried to look for online tutorials but all tutorials I have seen only teach me to do a std dev for 1 set of item.

ItemQuantityC3C4D4A4B4A4B4C4C4B4B4A5D5C5D6B6C6D6B6A6D6A6D6B6C6D6C6D6D10B10A10B10C10D10A10D10A10C10C10D10B10

View 2 Replies View Related

Filter More Than 10,000 Different Item?

Dec 17, 2012

I have problem with filter more than 10,000 different item using Excel 2010, any other way to filter?

View 3 Replies View Related

Macro To Add Last Item

Feb 18, 2008

I need a macro to add the last 2 items in column G, if they are both positive or negative. If one of the values is either positive or negative, then they must be subtracted.

In the example below the formula in G45 = G43+G44

The data is imported so the range will allways change foe rg G45 must become G75, then the formula will be G73+G74 if they are either both postive or negative or if either one is positive and the other is negative then G73-G74 ....

View 9 Replies View Related

Summing Every 3rd Item

Mar 4, 2008

I need to sum every third item in cloumn B begiinining with b2, B5, B8 etc. Is there a formula that I can use to calculate every third row

View 9 Replies View Related

How To Cause Each Item In A Combo Box To Do Something Different

Apr 6, 2008

I have a combo box(form control) and have it populated with data.

I want each item to do something so that when one is selected it triggers and event.

the items are:

Rounds 1 - 5
Rounds 6 - 10
Rounds 11 - 15...just like that all the way to 30

the worksheets are labeled "Rd 1", "Rd 2", "Rd 3" ...etc

When I click "Rounds 1 - 5" in the combo box, besides the "Summary" worksheet (which is where the combo box resides) only "Rd 1 - Rd 5" should be visible, I want all other sheets hidden, and when I click "Rounds 6 - 10" I want "Rd 6 - Rd 10" visible and all else hidden.

View 9 Replies View Related

Last Item In A Column

Apr 18, 2007

I have a list in column B starting in B11.

The list can have one or many items in it, and will not have blank cells between any populated cells.

Is there a way in Excel to determine the last item in the column without using VBA?

View 5 Replies View Related

Flag Partial Match Where Cells Contain Key Words

Jun 2, 2008

I have a list of customer names. These include one-off customers and companies. Unfortunately, they are not always keyed correctly and in the same format. What I need to be able to do is flag any companies. These will be those that contain key words, such as Ltd, Ltd., Limited, PLC, & Co, & Sons and so on.

My customer list may look like this:

1. Bill Jones & Son
2. Mr B Smith
3. Posh Homes Ltd
4. Posh Homes Limited
5. Mr A Singh
6. Bill Jones & Sons

I then need to flag no.'s 1, 3, 4 and 6 as Companies while 2 and 5 are flagged as non-company.

View 6 Replies View Related

Add Up Same Item Till Change

Jan 19, 2014

I am trying to add up the same item until it changes. I have attached the file with the desired outcome in the 2nd column.

View 1 Replies View Related

Finding First Item In Subset

Jun 12, 2013

I have a list that kind of looks like this. I sorted it by date, then by location, and then by time. I need to find the earliest item in one location on a given day and display as a list.

datelocationtime
6/1/2013 A730
6/1/2013 A745
6/1/2013 A750
6/1/2013 B800
6/1/2013 B810
6/1/2013 C730
6/1/2013 C745
6/1/2013 C800
6/1/2013 C815
6/2/2013 A730
6/2/2013 A745
6/2/2013 A800
6/2/2013 A815
6/2/2013 B700
6/2/2013 B800
6/2/2013 B815
6/2/2013 C800
6/2/2013 C815

View 10 Replies View Related

Only Roll One Item In Formula

Nov 30, 2013

When copying the formula =SUMIFS(G3:G103,I3:I103,"3") how do I modify it so that only the "3" rolls to the next integer and the rest of the formula remains constant? In other words the 3 would roll to a 4 when copied down a column and the rest of the formula does not change?

View 4 Replies View Related

Picking One Item From Array?

May 20, 2014

I have a table, which has pairs, e.g like this:

A=1
B=2
etc

how to give the value to variable based on this pairs? I mean something like this:

If left(mystring;1)=A, then
myvar=1

I used the case-structure, but maybe there is a better solution, which can use an array in order not to write all of the items whenever I need it.

View 9 Replies View Related

If Statement - If One Item Is X And Another Is Not Y Then Exit Sub?

Aug 15, 2014

I have a userform that allows users to choose their name (cboName) and an item (cboItem) from comboboxes.

Now, 2 specific items can only be selected from certain people

Lets say there's ItemA, ItemB and ItemC, and the people are named Joe, Bob and John

Now, only Bob and Joe can select ItemA or ItemC. How do I formulate If statements that prevent John from selecting ItemA or ItemC? Something like:

[Code]....

View 1 Replies View Related

How To Run A Macro For Each Item In Dropdown

Feb 5, 2014

I've created a dropdown list using "Data Validation" containing 5 items.

Each item in dropdown should run a macro when selected.

Should i use worksheet selection change event? or anything else.

View 2 Replies View Related

Item Textbox Into Cell

Jan 12, 2007

how can i do the following:

command text that is written in textbox to appear in cell,
and the next text that is written in the cell below the previous cell?

What code do I use?

Textbox_tekst
cell A4
cell A5 and so on

View 14 Replies View Related

Remove Item From ComboBox

Jun 1, 2009

My question is about removing items from a ComboBox. I've created a ComboBox with an array of items as follows:

View 2 Replies View Related

Vlookup (first Item Is Displaying)

Oct 23, 2009

I have the attached workbook. I have one sheet (materials) using Vlookup onto a second sheet (price list). If I put in a qty against 2 or more items with the same part code on the price list only the first item is displayed. It does get shown multiple times.

I need to try and get all items displayed, even if the part code is the same.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved