So I have a few hundred spreadsheets with the following structure:
Persson L. S skogsarb Granberg Malung
Persson M R fru
Persson N skogv Sjog 23 Torsby
What I want to do is move/split the ultimate word in every cell in column A to a parallel cell in column B, and then delete the word from column A.
I need to cut and move data in a worksheet where the bottom always changes. The header row should stay in worksheet 1 and row 2 down to the bottom needs to be cut and moved to worksheet 2. One time it could be 100 rows and the next time a thousand or more.
View 5 Replies View RelatedI have a sheet called 'TimeRecorded' which will contain lots of rows of data.
If a row contains 'invoice' in column H, then the data in that row, preferably as far as column H, should be moved to the next blank row in a sheet called 'Archived'.
I would like the macro to move every row that contains 'Invoice' in column H to be moved.
I have names like frank steven louis alex stewart
I want to move the last words of each column to a new column.i have the collections of 200 data.
I am trying to move the all occurances of word "Teacher" over one cell to the left and leaving all other data intact is there a code for such a thing.
View 4 Replies View RelatedIf I have a columns of numbers that vary in length, and can have empty cells between the final value and the formula to pull the number (of varing lengths), what formula can I use to repeat the final value?
For example - here are two columns:
4,800,000
0
46,594
space
space
<formula to pull 46,594>
or
56,000
48,150
36,528..............
I am having trouble with the final formula for this spreadsheet.
I want to be able to select "Holiday/Sunday" from the drop down men in column H, and have it multiply the total in column F by 2. There is already a formula in column F that sums column E-D.
I am trying to use the ARRAY.JOIN function as recommended by Domenic in previous posts. I need to output a single column of values from a 10 x 10 grid that does not have values in every cell.
(I would also like to eliminate any blank cells from the final column.)
I can only get ARRAY.JOIN to output the first value of whatever range I select, not a column of values.
I am trying to use the ARRAY.JOIN function as recommended by Domenic in previous posts. I need to output a single column of all the values from a 10 x 10 array that does not have values in every cell. (I would also like to eliminate any blank cells from the final column.) I can only get ARRAY.JOIN to output the first value of whatever range I select, not a column of values.
how to properly execute that function. One earlier comment was that I was not specifying criteria. I'm not sure from the description and help section of "morefunc" as to what those criteria specs are, other than specifying the whole array. I am attaching a test file with the 10x10 grid & some missing values in A1:J10. Cell L1 has the ARRAY.JOIN function with the entire grid specified, but the output is only the first cell of the grid.
Frequency
Formula to show the final/total a numeric values appears in an adjacent column.
I am currently attempting (I've researched many posts on this), to count /show the final totals a duplicate numeric value appears in one column, in an adjacent column (example below).
I am currently using an array Frequency formula below (courtesy of the board) filled down in column Q. this works well to count the frequency of duplicate numeric values appear on the list.
Formula used in Column Q below
{=IF(C2>=0.1,MAX(FREQUENCY(IF(C2:$C$1000=C2,ROW(C4:$C$1000)),IF(C2:$C$1000C4,ROW(C2:$C$1000),""))))}
However my aim is also to show the final entry of a numeric value in adjacent column R, by displaying text to indicate this. My example below shows “final” in column R
NB: My list is sorted by column C to ensure all numeric values are in ascending order.
Example
Column C Column QColumn R
12567 1 final
15789 1
15789 2
15789 3 final
23456 1
23456 2 final
12678 1 final
18965 1
18965 2 final
If coded correctly, there are various Excel functions & tricks for creating a formula to send someone on a wild goose chase through many worksheets and cells before finding the final cell that contains the final value. I was able to use =Cell("address",...) function to cut through the many paths and retrieve the address of the final cell. Is there a VBA trick for doing this to the active cell? I would like to be able to run a small VBA routine that would trace back the fomula of the active cell and return the final cell's worksheet and cell address.
View 9 Replies View RelatedI have a text string in a cell. it is comprised of a series of numbers and text. i would like to " cut" the first part of the string starting from the first space and paste in the cell to the left. For example.
range("b11") has the following: "This is my example"
I would like to perform the following:
range ("A11") would equal "This"
Range ("b11") would equal "is my example"
(note the space has been completly removed as well)
I have data in a single Excel worksheet, single tab, columns A:C.
I want to move that data into Word.
The format in Word:
Contents of A1
Contents of B1
Contents of C1
Blank Line
Contents of A2
Contents of B2
Contents of C2
Blank Line
etc, etc, etc, etc....for all rows in Excel.
I need my macros to search for the word "Cancel" or "Cancelled" in columns "T" and "U". Once found, I need the macros to make that entire row an opaque shading.
There will be other wording in these cells that contain "Cancel" or "Cancelled". Is it possible for the macros to search in the sentence and find the words "Cancel" or "Cancelled"
I started on the code below but am stuck.
i need a code that moves down a column and for every empty cell in the column the cell to the left is cleared and then it moves on to the next cell down. the column is not always the same and will start from a selected cell, and the column will contain no more than 5 rows
View 3 Replies View RelatedI am trying to write a sub for using vlookup. To enable the vlookup, I want to return a word in a cell to the cell in the next column. I use the InStr function, but it doesn't work. They all return as "Other".
Attached is the worksheet and here are the codes : Capture.JPG
[Code] .....
I want to enter a number 0 to 999 in cell A1 and when the enter key is pressed move the contents of cell A1 to A2 and A2 to A3, cascading down until A40. So after five numbers the first number I entered woul now have cascaded down to cell A5 ready to go into cell A6.
Would I have to use some kind of program or does excel have a command for this?
As I move down a cell, I would like the entire row and column be highlighted. Is that possible?
View 11 Replies View RelatedBasically I have an export which I need to manipulate so I can do a mail merge. I've managed to find a solution to remove the data I don't need and also managed to create the mail merge (even fixing the weird American date issue)
The data that is left looks a bit like this
Staff ID
Name
week ending
week ending
1
Bob Smith
02/03/14
[Code]...
basically what i need the macro to do is to see theres two Bob Smiths (or 2 Staff Id's "1") and put the second instance in column 4
e.g.
Staff ID
Name
week ending
week ending
1
Bob Smith
02/03/14
09/03/14
[Code]...
in some instances there could be 20+ week ending dates to go into the row.
also I don't need to have the dates all in seperate boxes, I just need the information in a row so the mail merge reads and sends out one message rather than 20 messages to the same person asking for each week by itself.
I've manually moved the dates into the boxes up to now and everything else is working
I will be moving to a specific cell - "N1". I'm looking for code that will then scan down from that cell, making the first blank cell the active one.
View 4 Replies View RelatedI need a formula to check sheet 1 column N and to copy the entire row if the cell in column has the word NO.
The row has to be extract in sheet 3.
I've been trying to come up with a conditional that will format a row if a cell contains any instance of a given word.
I know the following will format rows containing the EXACT entry of "apple" in column E:
=$E1="apple"
But I'd like a conditional that will find entries like "apple pie" and "crabapple" as well. I'm sure it's a simple solution, using a SEARCH function or something...but I can't figure it out.
I have a spreadsheet that I need to rearrange to improve readability. I have an example attache, which is easier to understand than describing it, but I'll try:
I want to start in a1, move to a2
copy a2 to b1
delete line 2 (the previous lrow 3 now becomes row 2
if a2 > 0.01, skip it and
move & select cell a3
... and repeat the above logic, on the next series of cells...
E.g.
copy a3 to b2
delete line 3 (the previous lrow 4 now becomes row 3
if a3 > 0.01, skip it and
move & select cell a4
...and repeat the sequence again.
In columnA I want to jump to the next blank cell in a list that continues to grow. So the first time I run the macro I want to go (blank) cell A5 to paste in some data. The next time I run it, it would need to go to cell A6 and so on.
When I do this manually, I simply hit ctrl down-arrow (takes me to the last cell w/data) and then one more down-arrow to take me to the empty cell below.
When I do this in the macro it seems to remeber the cell as an absolute reference (if that's the term) and so it just copies info in the same location as previous, instead of the next empty cell.
I have sheet1 with four columns. Team, Issue, Discussion and Recommendation. Discussion and Recommendation headings were placed in column B along with the data in the file I was sent. I need to get it back into table format to eventually load into Access. What I'm trying to do is to loop reading down column B. When I find the word Discussion (exact format) I need to drop down one row below the word, cut whatever is in the row, move one column to the right, Column C, and two rows up and paste. For example, cell B3 has Discussion. I need to drop to B4, cut whatever is in the cell and move to C2 and paste. I also need the same to happen for Recommendation. Find the word, drop down one row, cut whatever is in the cell, move two columns to the right and up four rows. I would like to delete the rows I moved data from, but will do that by hand if its too hard to do in a macro.
An example of my data:
TeamText
Design4. Reuse existing code to extent possible.
DesignDiscussion
DesignNo discussion
DesignRecommendation
DesignEstablish a baseline and work to the plan.
Design5. Delete old code
DesignDiscussion
DesignNo discussion
DesignRecommendation
DesignNo recommendation
Design6. Plan to work without full details.
DesignDiscussion
DesignIncremental design
DesignRecommendation
DesignWork on smaller details first
Sub Discussion()..................
I need to create a repeatable macro/module to help me prepare a spreadsheet for import into Microsoft Access. In each row of the spreadsheet is various information including Order Number, Model, and Serial Number. The problem lies in the Serial Number column, which often contains several Serial Numbers delimited by commas. In order to serve my needs in Access, each Serial Number instance needs to become a new row ( record) wherein all of the information (except for the Serial Number) is the same. It is crucially important that all of the serial numbers are in the same column. (I tried using text to columns as a starting-off point, but seemed to dead end).
Example:
Order#1; Model1; Serial1, Serial2, Serial3
Needs to become:
Order#1; Model1; Serial1
Order#1; Model1; Serial2
Order#1; Model1; Serial3
I would like to have a formula find a specific word in column L and return the sum from column E for the same fund from column C.
I tried using =SUMIF(L:L,"*annual*",E:E) but that gives me the sum of annual for the entire column. I need to be able to specify the fund.
word "annual" also appears in "semi annual" so I need to be able to separate the two.
I want to say if the word 'suitcase' is in column W (any row), place the word 'suitcase' in column Z, same row.
View 2 Replies View RelatedMy worksheet has two sheets which has daily continued data. I want to copy two entire columns E and F from Sheet 1 and then in Sheet 2 I want to find a particular word "80 Percent" and then insert two new Entire columns before that word. And after that I want to paste that copied columns of sheet1 in those newly created columns of sheet 2. Is it really possible because the cell reference of the word "80 Percent" in Sheet 2 will change daily. How to create the macro codes for this.
Find attached file : IRCS1.xlsx
I went through all the forums but confused a little. In the work sheet I want Excel to find an exact word such as letter "a" in all over the work sheet (not a column name) and paste it to the destination work sheet. I am attaching an example file, can some help me to solve the problem.
View 9 Replies View Related
