For/Next Loop Won't Start

Dec 8, 2009

I'm sure I just need a change in the line of code in red, but can anyone see why when the code reaches the For/Next loop in red it just jumps over it and goes to the End With line?

FYI - The code is supposed to check (select) the boxes in ListBox1 if any item in the list it's creating matches the value found in Sheets("Zone Associations").Cells(Rng, sZone)

View 9 Replies


ADVERTISEMENT

Enter Start / End Value In Box And Then Loop Value In Cell?

Oct 9, 2012

I am working on an excel sheet that asks the user for a Start and End value, to create a print selection. It should then loop all of the numbers between both values into Cell B1, update the sheet and print the page each time.

I think i have the VBA code worked out, except for the fact that i seem to get stuck at the loop action for printing all values between the 2 input values ( i don't really know how to do this).

I have an example of the file uploaded here: Zippyshare.com - Printbarcodes-test.xlsm

Here is the code i am using (the loop/selection part is still missing):

Code:
Sub PrintSelection()
Application.ScreenUpdating = False
Application.DisplayAlerts = False

[Code]....

View 9 Replies View Related

Nested Loops. Start & End Loop

Dec 5, 2006

is there any body kind enough to look into this code and tell me from where the loop body starts and ends and which is the loop variable and how it is being incremented or decremented. i know it is a stupid question but i admit here that i learn and manage to update my sheets only because of this forum help, as i have absolutly no idea of VBA when i started some couple of months back but know i can do little bits.
thanx again for all the help i got so far and hope to get some solution this time as well

Sub LowRisk_Chart()
Clearout
Voffset = 0
Vcounter1 = 2
Vline = Sheets("ChartWork"). Cells(Vcounter1, 1)
Vblocks = Sheets("ChartWork").Cells(Vcounter1, 4)
Vstdman = Sheets("ChartWork").Cells(Vcounter1, 5)
Vlength = Vblocks

View 3 Replies View Related

Start/Stop Loop Based On Condition/Criteria

Aug 31, 2006

I have a piece of code that put a check in all checkbox in column B from row 5 to row 50 but in column C, I have data from row 5 to 38. I want the macro to stop at row 38 in column B. When the cell in column C is empty stop putting checks in column B. How can I make this macro Check all checkbox down column B and stop when column C is empty. How do I add a loop to stop when the cell in column C is empty?

Private Sub CommandButton1_Click()
Dim CB As Variant
For Each CB In ActiveSheet.CheckBoxes
CB.Value = False
Next
End Sub.......

View 3 Replies View Related

Loop Within A Loop (repeat The Loop Values)

Mar 31, 2008

With Sheets("regrade pharm_standalone")
For Each r In .Range("standaloneTerritory")
If r.Value = "X101" Then
r.EntireRow.Copy
Sheets("X101").Range("A1").End(xlDown).Offset(1).PasteSpecial xlPasteValues
End If
Next r
End With
-------------------
I need to repeat this loop for values from X101 to X151. In all cases, the sheet name is equal to the value I'm looking up (eg: value = X102 goes to sheet X102).

I have a named range called 'territories' that contains the list of X101 -> X152.

I'm hoping to make the code perform the loop for each of the territories without my having to copy & paste and change the 'X101' 51 times as this would seem a rather silly thing to do!

View 9 Replies View Related

Loop Through Multiple Files And Call Macros (but Unable To Loop)

May 14, 2014

Macro which loops through a number of files and calls the same macro in each of them. Unfortunately when I add "Application.Run..." to the code, it no longer loops through the process and instead stops after updating the first file in the loop. If I remove the "Application.Run..." code and add any other code, the loop works fine and it continues through the process repeating all the steps for each file found.

Why it stops after one file when using "Application.Run..." to call the macros?

NB I have a list of path and file names starting in row 8 of columns A and C. Each file in the list has a macro called UpdateS1 and promoupdate1.

Sub C_Run_Loop_Macro()
Dim lastRow As Long
Dim i As Long

[Code]....

View 4 Replies View Related

Store Row Number Within Loop And Delete All Stored Rows After Loop?

Sep 11, 2013

I have working code that returns a row number within a for loop based on parameters I set.

Each time the for loop runs I would like to store this row number, then after the loop has finished, delete all stored rows.

Code:
for rowNum = 1 to x (some variable end row number which I already have worked out using End(xlUp).Row)
if x = y then
*storedRow = rowNum
end if
next rowNum
*

Lines with a * are the bits I can't work out. I've been trying to understand arrays by reading posts on what other people have done, but I can't fit (or fully understand) the reDims, or reDim preserves into my code. I've seen what appear to be quite complex ways involving uBounds and LBounds, but unfortunately I can't see how to use them.

All I want is to simply keep adding a row numbers to a variable, (i.e. row 2, 5, 20, 33, 120, etc) and then delete those specific rows.

View 4 Replies View Related

Loop Through Cells And Ranges Reverse Order With Backwards Loop

Aug 30, 2006

I am looping through each cell in a range and I would like to loop in reverse order.

Dim CELL As range
Dim TotalRows As Long
TotalRows = Cells(Rows.Count, 1).End(xlUp).Row
For Each CELL In Range("C1", "C" & TotalRows)
CELL.Select
'Code here to delete a row based on criteria
Next

I have tried:

For Each CELL In Range("C" & TotalRows, "C1")

and it does not make a difference. I need to loop in reverse order since what I am doing in the loop is deleting a row. I am looking at a cell and determining its value. If the value is so much, then the row gets deleted. The problem is that the next row "moves up" one row (taking the pervious cell's address) and therefore the For Each Next loop thinks it has already looked at that row.

View 7 Replies View Related

Copy Cells In Loop Based On Loop Increment Being Multiplied

Feb 7, 2008

I have some numbers in a column that I need to copy 12 times (each one) into another column. The problem is that I got like 200 records that will be converted in 15000 aprox. I've uploaded an example of what I need,

View 3 Replies View Related

Loop Through Index Worksheets Using For Loop And Select Clause

Nov 4, 2013

I have a workbook that contains, say, 50 worksheets: the first two worksheets summarise the data and are static in that they don't move position. However, the next four worksheets contain certain data for any given month. Each time a new month comes along, say, November, I insert four new worksheets after the two static ones as a result October's four worksheets are simply moved down the line in terms of worksheet order.

I need a macro to refer to the first six worksheets only (not the other tabs). I opted for index referencing for each worksheet, ie one - six. Now within these six worksheets in any given month, I need to sort the data by a certain column. The problem: in sheets 1,4,5 and 6 I need to rank by column E, but in sheets 2 and 3 I need to rank by column C. I have stepped through the code, which works for sheets 3-6, but doesn't seem to refer to sheets 1-2.

Sub WorksheetLoop()
'
' Loop through an indexed number of worksheets; _
' & this ensures that the worksheet range is dynamic _
' and is able to adjust when new sheets are added/removed, etc.
'
'Dim ws As Worksheet
Dim i As Long
Dim ws As Worksheet

[code]....

View 2 Replies View Related

Avoid Changing A Loop Counter Within A Loop?

Oct 24, 2009

I've worked on a solution for this thread (http://www.excelforum.com/excel-prog...-automate.html) but have been mentally challenged with how to avoid changing the loop counter in one of the loops I have used to resort an array of file names from the getopenfile dialog.

The aim of the shown code (see post 12 of the above link for attached file) is to check if the file containing the macro is included in the array returned by getopenfile while sorting the array of file names, and if so, moving it to the end of the array for "deletion" by redimming the array to exclude the last item. This problem of the open file being selected in the dialog may never arise, but... as the OP's request in the other thread was to allow two-way comparisons between numerous files, I've considered it likely enough to test for.

Here's the code I have settled for esp between the commented lines of hash symbols, which does change the counter (see the commented exclamation marks), but prevents an infinite loop (on my second try!) by using a second boolean flag of "HasCounterBeenChanged". Is there a better way of doing this? Or, alternatively (not in my thread title), is it possible to prevent the active file being selected through one of the arguments in the getopenfilename method?

View 3 Replies View Related

Copying From One Loop To Paste Into Another Loop?

Aug 27, 2012

I am working on some code that loops through a column of number values. Whenever it encounters a number value and a blank cell in an offset column, it places that number value into an offset cell (forming a separate column to be compared to another column in a separate sheet). I would like to take all the values in that new column and begin placing them in a new column in a separate sheet adjacent to another table. Most of the time, these values should match the adjacent values in the separate worksheet. However, if they don't match, I would like a new row to be created for that mismatched value.

For example. This is the first worksheet. So far, my macro loops through the column with rows 1-5. It looks in the offset cell(0,2) for Isempty value and then places that value into the offset cell(0,6)

text
1
text
text

[Code]....

View 5 Replies View Related

For Each Loop To Delete Row W/ Value (Loop Backwards)

Aug 2, 2007

For Each loop can be instructed to loop starting the bottom of the range. I know that a For To Loop can handle looping from the bottom up,

Sub Filterout()
Dim c As Range
Dim rng As Range
Dim i As Long
Dim lrow As Long
Dim counter As Integer
lrow = Cells(Rows.Count, 3).End(xlUp).Row
Set rng = Range("c2:c36")

For Each c In rng
If Left(c.Value, 1) "~~" Then
c.EntireRow.Delete
End If
Next c

View 9 Replies View Related

Nested Loop. Inner Loop Not Running

Nov 30, 2006

i have a problem with a nested loop:

it seems like the first instance of the code is running the way i want it to run, but when it starts with the second instance, it does the first search and copy, but it seems like the nested loop is being ignored.

am i doing something wrong?

dan
==========================================================
Thanks to Aaron Blood for the find_range function. i also poached the lastrow function from somewhere on ozgrid, but I cant remember the name of the poster.
==========================================================

Sub new2()

Dim Org_Area As Variant
Dim Item As Variant
Dim Copy_To1 As Variant
Dim Cell_Ref As Variant

r = 1 ..................

View 9 Replies View Related

Do...Loop Error :: Loop Without Do

Dec 17, 2008

Can't seem to figure out why my Do Loop keeps giving me an Error of "Loop without Do".

View 14 Replies View Related

Loop Inside The Loop

Apr 28, 2009

I have got a loop which is working fine but now i need another loop which will run till the end but need to repeat itself as soon the column x become 1 the highest number would be 3

here is my main loop A1 = 5000
and second loop need to run inside the this loop

Sheet1.Activate
i = Range("A1")

For b = 1 To i
If Cells(1 + b, 3).Value = "P" Then
Cells(1 + b, 29).Value = 1
Else
If Cells(1 + b, 3).Value = "S" Then
Cells(1 + b, 29).Value = 2
Else
If Cells(1 + b, 3).Value = "C" Then
Cells(1 + b, 29).Value = 3
End If
End If
End If
Next b

View 9 Replies View Related

Endless Loop Within A Loop

Oct 28, 2006

I have loops working in other loops. The macro is almsot working well. It does the calculation i want but it fails to stop a loop, because of that, the macro can't run the next main loop (c), which is to move to the next cell where the calculations must be run.

I attach a file. the troubleshooting macroation is Sub Itiration.

The code of this macro are bellow. Basically, the loop using d as counter run into an endless loop. I don't how to stop this loop without affecting the results which are calculated correctly.

Sub Itiration()
Dim CurCell As Object
Dim TempSum As Double
Dim d As Integer

For c = 3 To Cells(3, 4)
If Cells(11, c) > 0 Then
For i = 1 To Cells(10, c)
Do

View 9 Replies View Related

Slow Down Loop At Each Loop

Nov 18, 2006

Going through a loop, I am trying to load pictures into an image box (or alternatively into a label) one by one i.e. going through the loop the first time, I want to load picture 1, then on the second loop, picture 2 and so on. A bit like an automated slide show.

I have written a simple loop and have used the loadpicture function to load the picture into the image box. When the code runs, the image box only gets populated after the last run through the loop. I have tried using application.screen updating function and the image.activate function without success. It is a simple bit of code and I expect an easy problem to solve if you know excel vba well.

View 6 Replies View Related

For Loop Goes Into An Infinite Loop

Apr 8, 2007

My code below goes into an infinite loop, with culprit line shown in bold and underline...

View 4 Replies View Related

Loop Gets Slower On Each Loop

Jul 20, 2007

I am parsing 15,000 files from a network server. The files are all the same format and length. The problem is that the first few iterations of my loop run fairly quickly, 7 to 9 seconds a case, but after only 300 iterations I'm up to 60 seconds a case. How do I keep the last iteration running as fast as the first iteration? I've included the main loop of my parsing routine below.

Sub Fill_Summary_Tabs() 'fills out the Datapack and JMP tabs
Application. ScreenUpdating = False 'turn off screen updating for speed

Call PrepImporterTab 'formats the Importer Tab so that everything runs smoothly < 1 second
Dim fs
Set fs = CreateObject("Scripting.FileSystemObject") 'part of the filename test

For N = StartingCase To EndingCase '***** Start of the Parsing Loop *****

Sheets("Setup"). Cells(20 + N, 1).Value = Time 'Print the start time of each case....................

View 7 Replies View Related

Using ' In Cells: Add A ' To The Start

Dec 15, 2008

I currently have a number of spreadsheets with number data in it. I need to import it into a third party program. Unfortunately when this program imports it it counts numbers such as 1 as 1.0. This third party program says the only way around this is to put a ' before the numbers and this seems to fix the problem. My problem is that I have so much data I cannot go through ever cell and add a ' to the start. IS there a quick way to add ' to the start of certain cells?

View 4 Replies View Related

Start With In An If Then Statement

Jan 14, 2009

Is there a way to use a wild card character in an excel formula? i.e have a formula =IF(AND(B2<>"",A2<>"Fax",A2>"Conference"),1,2) What I am looking to do is put a 1 if a cell starts with Fax or conference.

View 2 Replies View Related

Using 1 Macro To Start Another

Jan 19, 2009

I have a macro, at the end of which I'd like it to jump to a second macro OR incorporate the second macro into the 1st. I've tried combining them in several different ways, but get an error 13 every time. So, basically, if I can't combine them into 1 macro, then perhaps I can get the 1st to automatically start the second. The 1st code is based on a previous solution (for a different problem!) I received from this forum

Here is the 1st

View 5 Replies View Related

Only Visible On Start Up

May 9, 2009

I have a workbook that is set to show a form on startup and then the code tells excel to be visible = false. How ever i have disabled the close button on my form therefore i have stuffed my program up and cant edit it at all.

View 3 Replies View Related

Always Start In Certain Cell/row

Jan 18, 2010

I have a macros that copy’s certain bits of data forma row, then copies it to another sheet, however I always need it to start in column A. E.g. if my active cell is C3, I want to start in A3, likewise if the active cell is E3, I want to be able to start in A3.

View 13 Replies View Related

How To Limit A Value To 360 And Start From Zero

Jan 27, 2012

I have a formula that adds two numbers. Here it is:

=IF(E10="","",(E10+$C$8))

I don't want the numbers to be more than 360 when added up. When it reaches 360, I want it to start over from zero. Instead of, say, E10 = 200 and C8 = 200 ... I don't want the answer to be 400, I want it to be 40.

View 2 Replies View Related

Run A Macro On Start Up

Feb 5, 2007

I want my system to run a macro automatically every time its turned on.

View 9 Replies View Related

XL Start Up Folder

Jul 29, 2005

I am trying to record macros, however, without success. When I launch Excel, two spreadsheets, PERSONAL and Personal Macro Workbook are launched. However, when I attempt to record a macro in a new spreadsheet, I get an error message, "Personal Macro Workbook in the startup folder must stay open for recording".

Looking in the XLSTART folder, I see two files, as noted above.

View 9 Replies View Related

Start Up Options

Feb 9, 2007

I have a spreadsheet that I access over a citrix network, when I opened it at the start it gave me an option to enable or disable refresh external data, also enable or disable macros both of these are gone now and I have searched the net to find a way to get them back.

View 2 Replies View Related

Start A New Application

Mar 22, 2007

I have an excel file which automatically loads an user form once the file is opened and when the user form is closed, the file also closes. When the file is open i am not able to switch to anyother excel file because this userform is active. Is there a way, when i open the file with userform, a New excel application starts. So that i can use the other excel files opened by the previous excel application.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved