I have a formula that adds two numbers. Here it is:
=IF(E10="","",(E10+$C$8))
I don't want the numbers to be more than 360 when added up. When it reaches 360, I want it to start over from zero. Instead of, say, E10 = 200 and C8 = 200 ... I don't want the answer to be 400, I want it to be 40.
I copied the macro and it works on text files, but will this work if you have
a .csv file or does it have to be text? What I have is an extra large .csv
file that needs to be broken up into a couple of sheets.
I am running a formula on a large data set and need the returned value to never be less than zero or more than 100. using the MIN and MAX functions, but how do I use them both at the same time?
View 4 Replies View RelatedHi All,
Why is
1-NORMSDIST(7.8) = 3.10862e-15
while
1-NORMSDIST(7.9) = 0
Is there a limit to how far out the Gaussian PDF curve you can go before Excel rounds to zero?
I'm adding some necessary code to the beginning and end of some cell contents in Format | Cells | Custom and I seem to be coming up against a character limit.
I'm using the phrase "!!<"@">!!" to add the code, but with some cell contents the result is ########### (but much longer), and I'm having to remove some of the text to make it work. The limit seems to be around 255 characters.
I have a workbook with 3 sheets. Sheet 1 contains a month of data with Customer Name and Product Code, and quantity shipped (columns A, B, and C). Sheet 2 contains Product Code and quantity produced (Column A and B). In Sheet 3, I have the customer name listed once by running a pivot table against the data in Sheet 1. I need to show the quantity produced for each customer in Sheet 3 but not exceed the quantity produced for that Product Code in Sheet 2 even if the quantity shipped was greater. For example:
Sheet 1
Customer A - 100 shipped of Product Code X
Customer B - 200 shipped of Product Code X
Sheet 2
Product Code X - 150 produced
Sheet 3
Customer A - 100 total
Customer B - 50 total
Customer B would only be allocated 50 as there was only 150 produced and Customer A was allocated 100 of the total 150 produced, leaving 50 to allocate to Customer B.
how to make a summation formula in excel (not simply adding 2 numbers together)? I have one cell that I would enter a number into, and another cell which would specify the limit. So if the first cell A1 = 1, and cell A2 = 50, then the 3rd cell would automatically add up every number "n" plus 1 until n=50. ie: (1+1)+(2+1)+(3+1)+...+(50+1)=result. The limit would have to be flexible, so if I change the 3rd cell to 70 then it would calculate to 70.
View 9 Replies View RelatedI have a MAX formula that searchs a range of cells and then gives the largest number.
How can I set a limit so that even if the MAX number is 200 I want the return to be only 150 maximum.
Example:
A11002005075
I want to be able to search for the largest number but even if the largest number is >150 limit the return to 150.
I have a bunch of city and state data in a range that I am referencing in
VB.
Example: ...
I've spent a fair amount of time creating a financial planning spreadsheet that I'd like to try to sell. My biggest problem is selling it to people and allowing them to use it without them being able to email it to anyone else. My first thought was to code it where a macro will run when the spreadsheet opens that checks if the spreadsheet is being opened on a specific computer and will close down if it is opened on an unauthorized computer. I'm not sure if this will work or how to code it
View 2 Replies View Related have a set of numbers ranging from 1-25 in column A1-A25 in descending order. I want to have a column B1-B25 which outputs numbers in column A up to a maximum of 5.
Eg.
column A
25, 6, 5, 3, 1, 0
I want in column B
5, 5, 5, 3, 1, 0
I have constructed an inventory formula, subtracting Current Inventory (CI) from Required Inventory (RI), to generate a number of how many new products must be Ordered: RI-CI=O. The problem is that if CI exceeds RI, I get a negative number for "O".
Question: How can I structure the formula to give a zero for any sum less than 1?
For example in this formula I typed in WWW as the max:
=SUMPRODUCT(($F$5:$WWW$5>=C2)*1,($F$5:$WWW$5<=C3)*1,ABS($F$6:$WWW$6))
If I try to type in a value higher than WWW it will give me an error. I was just trying to put in an amount that I would never hit within the row.
in the attached spreadsheet I have multiple sheets. On the tab "Tech IDS", column A is named "Name" and column B is the tech ID that is associated with the name in column A. Column B is validated as List=Name. Now under the tab "CAL Form" under Column A I need to type the tech's name. Now under the tab "CAL SHEET TEMPLATE" the name that I typed corresponds with a given cell (i.e. B2='CAL Form'!A2). Notice though that I2 does not give a tech id b/c of DV dropdown list meeting its limit. Look at I68, Bob's id appears b/c he fits within the limits. My question is... how can I still use the list with more names or can I modify the formula (=INDEX(ID,MATCH(B68,Name,0))) to include another Match search?
View 4 Replies View RelatedI'm trying to use the countif function to search a cell containing, say, 1000 alphanumeric characters.
For example, cell A1 contains the text...
"There needs to be an easier way to build worksheet formulas for 64 levels of nesting and 255 arguments to be meaningful. Perhaps a "Formula Composer" dialog box or something that allows you to build up a complex formula in parts and allows you to evaluate the partial formulas. When you're done, and the formula is displayed in the sheet, all of the parentheses would be automatically put in the correct places."
...and cell A2 contains the formula...
I have an excel-sheet with two worksheets one called "sheet1", this is where all data is stored, and "sheet2", where data from sheet1 can be evoked.
I'm now looking for some code that get arounds the 3 conditions limit of conditional formatting. Most of the codes on internet, just do this but only when entered manually on the selected sheet. In my case all data is entered on sheet1 and are displayed by some formulas on sheet2. It is on sheet 2 where I would like the color change to happen.
I found a piece of code that was said to do just that, but when testing it appears not to. It only updates the cell color when the concerning cell is clicke twice.
Is there a way to make the find and replace function not stop when a cell is too large? Instead, make it pass over the large cells and move on to the next cells? Is there a function that gives the number of characters in a cell? If so, one could sort by cell size and then work around the cells that are too large?
View 2 Replies View RelatedI am trying to add a final if statement to a formula but it wont let me and I cannot see what i am doing wrong - I wondered if there was a limit? ...
View 14 Replies View RelatedHow do I adjust the VB code below so when the user clicks the command button they are prompted to set a limit.
i.e the code only runs til it hits the limit and stop (instead of running until it there are no more x in the columns)
Row 2, Col 9 stores the column numbers (listed as 1, 2,.....100) so thought this could be used in some way.
1. how do i set up the code so a user can enter a parameter value e.g 50 (which is the limit but also includes the values in column number "50")
2. how do i adjust the code so it take the parameter value and stop when it reaches column number "51"...
I am currently writing some VBA code to loop through and copy data from Excel file in sub folders into a master sheet of data. There are some 1200 Excel files (these are pre-2007 files), each containing a maximum of 600 lines of data. So far the code works until it gets to around 65000 rows (the old Excel limit). I am using and writing the code in a Macro-Enabled Excel 2007 file.
I am using a Range.Offset call, which is where the error is occurring, to copy in a name basically. What happened right before this was a Range.Copy operation from the old Excel file to a Range.PastSpecial in the new one. This worked fine, and actually went a few hundred rows past the pre-Excel 2007 limit. But when the single cell operation Range.Offset().Value is called next, it crashes with a Application or User-Defined error. The code works some 100+ times through the loop with no problem, and the file that it was working on is no different then the other files.
Iv found some code that will limit my textbox entry to numbers only, i dont quite understand how it works and i need to change it so it limits the textbox keypress entry to Text Values only.
View 3 Replies View RelatedI need to work out a formula to calculate the “value over limit” in the following scenario:
Cell D11 contains a total balance (input manually)
Cell D1 is the total of cells E to H
Cell A1 contains the formula to calculate the % of Cell D1 against the balance in Cell D11
Cell B1 will used to input a credit limit which will either be blank or the value of the limit
In Cell C1 I need a formula that will return 0 or value over limit based on the following-
Formula to calculate the value over limit: If cell A1 >10% of Cell D11 return the value difference between 10% of Cell D11 and the value in Cell D1
example; cell D11 = £100,000 & cell D1 = £22,000 (cellA1 = 22%): 10% would be £10000 therefore, the result would be £12,000 over limit
However, the comparison also has to take account of Cell B1. If this contains a balance then this needs to be taken into account e.g. in the example shown, if cell B1 contained a balance of £5000 then the result would be £7000 over limit or if the figure was =>£12000 the result would be 0.
If the % in Cell A1 is <10% the value is always returned as zero in Cell C1 regardless of any balance in Cell B1.
Is there a limit to how many selections you can include in a named range?
I have a worksheet that is split into several sections using merged cells accross rows. I would like to name most of the cells in a column so i can loop through them, but i can not include the merged cells that cross over it.
If my range is in Column C, it looks something like C2:C5, C7:10, C12:C20 (where C6 and C11 are part of a merged cell). When i name the range, it shortens the selected area.
Is there a limit? Is there another option to naming this very long range?
I am using the code below to rename worksheet tabs based on the value in cell B3 on each worksheet. I am getting a run time error attributed to the value in cell B3 exceeding 31 characters. This is the maximum number of characters a worksheet tab can support. some additional code to rename the worksheet tabs and trim the name when 31 character limit is reached? note I need to keep the value in cell B3 as it is but trim the worksheet tab name only.
Code:
For I = 1 To Sheets.Count
If Worksheets(I).Range("B3").Value "" Then
Sheets(I).Name = Worksheets(I).Range("B3").Value
Else:
Sheets(I).Name = "Default (" & I & ")"
End If
Next
Is there a way to limit the number of columns and rows that a user will see and therefore limit the scrolling in a spreadsheet?
View 6 Replies View RelatedI have some code that checks to see if a file exists on the network. Works great (super fast result) if the file is accessible. Works ok (2-3 seconds) if the file is on the other side of a vpn. Works sloe (5-15 seconds) if the file is there on a vpn network and I'm using a wireless computer (wireless adding extra lag). And finally; really slow because the wifi connection is slow or some what out of range ...... I want my code for checking the existence of this file to stop after a specified amount of time.
Code:
Sub AreWeLive()
On Error GoTo networkprobs[code]......
I am trying to define/name a range in vba. The range will always start in the same place, but as more information is appended to the data set it comes from, the more (or less) rows it can populate. I want to limit the length of the range because I am using it in a data validation drop down list and i do not want to see all of the blanks at the bottom of the list.
Checking the "Ignoe blanck cells" box in data validation did not make the spaces disappear, probably because there is data in an adjscent column that goes much further down the worksheet.
My current vba is:
ActiveWorkbook.Names.Add Name:="Date", RefersToR1C1:= _
"=Input!R4C4:R65536C4"
I want it to be the range that would highlight if I placed my cursor in R4C4 and hit Ctrl+shift+Down Arrow
I was wondering is there a limit on the output of a msgbox. I have an output that will only display a certain amount of characters. Is there another option that can be used.
View 9 Replies View RelatedIn a workbook that already contains macros, is there a way to set a cell = to "" if another cell is
View 9 Replies View RelatedI poked around and found a macro to highlight the active cell, but I want to limit it to be active only for range A1:A37. Any ideas? I put in the Set OldCell = Range("A1:A37"), but all it does is turn every cell you pick blue and it stays that way, so I'm not sure how to limit it.
Private Sub Workbook_SheetSelectionChange(ByVal Sh As Object, ByVal Target As Excel.Range)
Static OldCell As Range
Set OldCell = Range("a1:a37")
If Not OldCell Is Nothing Then
OldCell.Interior.ColorIndex = xlColorIndexNone
End If
Target.Interior.ColorIndex = 8
Set OldCell = Target
End Sub
