I currently have a number of spreadsheets with number data in it. I need to import it into a third party program. Unfortunately when this program imports it it counts numbers such as 1 as 1.0. This third party program says the only way around this is to put a ' before the numbers and this seems to fix the problem. My problem is that I have so much data I cannot go through ever cell and add a ' to the start. IS there a quick way to add ' to the start of certain cells?
I need to calculate the percentage of cells in one column that have data in them compared to those that do not. This is easy enough to do by itself but here's where it gets tricky for me. I need this percentage calculated only when cells in a different column contain data.
Here's the specifics. All of the row and column references are exactly what I'm looking to have in my worksheet. If A5:A200 contain any value then I want to know the % of the cells in F5:F200 that have a value in them compared to the same number in F5:F200 that contain no value. I would like the answer to show up in B2.
Part of the issue is that cells A5:A200 already have a formula in them so I think that would count as a value. The one thing that might help is the fact that A5:A200 values that I'm looking for ALWAYS start with TN so that could be used as the search function. The reason why I need to base it on a value in A5:A200 is that the sheet is blank until I enter data in the rows. I can't have the blank rows below the last data that I've entered on the sheet count towards the percentage that I'm looking for.
Basically it's a sheet that I enter installations and service calls on. The information always has a TN# associated with it. Which through a formula is automatically populated in the same row in the A column. I track the installation or service call and when it's completed I enter a completion date in the F column in the same row.
I am trying to be able to keep track of the percentage of jobs completed (completion date entered in column F) compared to incomplete (cells in column F that have no completion date) but it has to only look at rows that actually have information entered in them which I think should be done by column A. column D5:D200 is where I enter the main information and there is no formula entered in the cells in column D so if it's easier to base it on that column then that's fine.
In col A I have various text codes in no particular order: i.e.cell A2 is PM-A01, cell A3 is BTC05, cell A4 is PM-B00, etc. The first two positions are always alphabetic. I want to sum all the numbers in column B whose adjacent column A text starts with "PM". I tried =IF(match("PM*",A2:A100,0),b2,"") but just get "NA"
I'm using this formula (in Cells D4:D10) to tabulate hours being spent on various testing activity categories (N,O,R,E,U,A,D). Is there a method I can use to permit me to change the range of cells being tabulated using Named Ranges or some sort of substitution?
= SUMIF($C$15:$C$89,C4,OFFSET($C$15:$C$89,0,4))
for example I would like to use the value I present in cell A2 as the starting point (for the range) & B2 as the end point (for the range) of cells being evaluated. In other words the improved formula would look like this.
=SUMIF(A2:B2,C4,OFFSET(A2:B2,0,4)) -or something like that-
I am working on a formula by it is repeatedly failing.
Based on input 1 which is the month name, I am looking for a formula to identify the position across columns as the starting cell and then the value in input 2 needs to be repeated 12 times from there.
Example: Input 1 is Apr-14 Input 2 is 51.8
I have columns with month names starting Apr-13 to Mar-15
Since the input 1 is Apr-14, the formula should identify the appropriate column named as Apr-14 and from there it should copy the value (input 2 ) 51.8 for the next 12 cells which is until Mar-15. I have attaches the examples for your quick reference.
Is there any way of writing a macro so that specific cells are formatted to start with a capital letter and end with a full stop. Can you also write a macro to automatically spell check specific cells?
I need some assistance taking dates entered in a userform and applying them to the sheet 'Completed_Report' cells Q1 and R1. The userform code that stores the input values is:
I have a excel sheet of data numbers which blongs a packet of inventory where i found number series like this:
Start Range End Range Qty 2101200 2101499 300
I have to draw this onto a series like 2101200 then 2101201 then 2010202 etc. but some time these numbers are in qty 30000 or more. I have questions
1- If any macro colud fill series suppose if write number in A2 and qty in B2 so it reads the qty of b2 and fill the series in A. If i write 1 in A2 and write 50 in B2 so the series should be auto fill 1 to 50.
My Second question is opposit of my above question.
2- if i have different number series in column a and i want them to be as start number in column b and end number in column c and qty in column d based like mentioned below example. Series [b]Start Range End Range Qty 1 1 1 1 3 3 3 1 5 5 7 3 6 7
I have some text I wish to add some content to the front and back of it. i.e. the text in the cell is "214.212.134.62" and I want to add "http://" to the front of it and ":9999" to the back to it, so it looks like "http://214.212.134.62:9999" in a different cell.
Is there a way to use a wild card character in an excel formula? i.e have a formula =IF(AND(B2<>"",A2<>"Fax",A2>"Conference"),1,2) What I am looking to do is put a 1 if a cell starts with Fax or conference.
I have a macro, at the end of which I'd like it to jump to a second macro OR incorporate the second macro into the 1st. I've tried combining them in several different ways, but get an error 13 every time. So, basically, if I can't combine them into 1 macro, then perhaps I can get the 1st to automatically start the second. The 1st code is based on a previous solution (for a different problem!) I received from this forum
I have a workbook that is set to show a form on startup and then the code tells excel to be visible = false. How ever i have disabled the close button on my form therefore i have stuffed my program up and cant edit it at all.
I have a macros that copy’s certain bits of data forma row, then copies it to another sheet, however I always need it to start in column A. E.g. if my active cell is C3, I want to start in A3, likewise if the active cell is E3, I want to be able to start in A3.
I have a formula that adds two numbers. Here it is:
=IF(E10="","",(E10+$C$8))
I don't want the numbers to be more than 360 when added up. When it reaches 360, I want it to start over from zero. Instead of, say, E10 = 200 and C8 = 200 ... I don't want the answer to be 400, I want it to be 40.
I'm sure I just need a change in the line of code in red, but can anyone see why when the code reaches the For/Next loop in red it just jumps over it and goes to the End With line?
FYI - The code is supposed to check (select) the boxes in ListBox1 if any item in the list it's creating matches the value found in Sheets("Zone Associations").Cells(Rng, sZone)
I am trying to record macros, however, without success. When I launch Excel, two spreadsheets, PERSONAL and Personal Macro Workbook are launched. However, when I attempt to record a macro in a new spreadsheet, I get an error message, "Personal Macro Workbook in the startup folder must stay open for recording".
Looking in the XLSTART folder, I see two files, as noted above.
I have a spreadsheet that I access over a citrix network, when I opened it at the start it gave me an option to enable or disable refresh external data, also enable or disable macros both of these are gone now and I have searched the net to find a way to get them back.
I have an excel file which automatically loads an user form once the file is opened and when the user form is closed, the file also closes. When the file is open i am not able to switch to anyother excel file because this userform is active. Is there a way, when i open the file with userform, a New excel application starts. So that i can use the other excel files opened by the previous excel application.
Column A is the list of start dates, and Column B is the list of end dates to be used at the variables. Column C is a list of dates, and Column D is the corresponding temperature data to Column C.
What I would like to do is create a new column (E) that sums the temperature data from Column D based on the start and end dates from Column A and B respectively (these dates to be used to match the dates in Column C).
I have a program that requires the last 8 days to be total, unless there are 2 days off in a row. So my cells need to sum the previous 8, but then stop when two zeros show in the column and then restart following. One zero should continue to total the previous 8 days. As shown below, for 1/10/14 I should see 57.5. The sum needs to restart on 1/13/14 to show a total of 10.5. I have tried multiple formulas with no luck.
I have a data which has a start time, end time, Stay Time(End-Start) and # of subjects. I am trying to create a graph, line, bar or histogram which shows how many subjects were there at a specific time. So the horizontal axis would have time from 00:00 to 24:00 and vertical axis would have the total # of subjects or the %.
I have this column with a value like 04/06/2008. I will want another of the column to auto generate the date for the start of the week like 02/06/2008 which is a Monday.
Need a formula that will generate the ending date of task, adding therefore if needed the number of weekend(s) in between the start and end date to the End date.
Let us say: task is starting in 2008/11/11 the duration of the task is 7 days. So, we should get an End Date= 2008/11/19.
2008 11/11 11/12 11/13 11/14 11/15 11/16 11/17 11/18 11/19 Tue Wed Thu Fri Sat Sun Mon Tue Wed
I've seen a lot of timestamp solutions but none of them fit my needs. Also my VBE skills are not good enough to create this. So here's the problem:
I've got 3 columns E,F en H. H contains a validation list with 3 options OK, NOK and OPEN.
If H is NOK I would like E and F to be blank. If H is OPEN I would like E to contain a start date wich doesn't update. If H is OK I would like F to contain an end date wich doesn't update.
I have Sheet 1 with a series of 10 lists. Sheet 2 will display the information on Sheet 1 based on the day. For example, the user will input a start date. Excel should display item 1 in lists 1-10 on day 1 in the respective column. Then item 2 in lists 1-10 on day 2, etc. When it reaches the end of a list it should start at the beginning. Day 1 shold be the start date. Day 2 shold be the next day, etc. I have lists 1-10 all ready to go, but I am having trouble figuring out how to go about populating the other columns.
possible to display in side popup window which letter start from ak in our previous record i.e. akashwani or akshare like that. I dont want through vba or access because i m not use before. I want same excel sheet.
I've attached a sample of something I'm working on and the layout it's currently in.
I have a list of customers and an amount per month, in the sample, I want to be able to use a formula that will select which month the customer first has an amount >0 and in the end date column, I want to see when the customer then stopped showing an amount >0.
I have a massive list of these customers and sorting them each month is difficult.
In another sheet I have "Project " , " Start " "End" . I need to find the start and end quarter and fill in. The output should be "
HR 2014/Q1 2015/Q3 crm 2013/Q1 2017/Q3
ATTACHING A FILE- In sheet- raw data - i need to search on ID- and in "Test.xlsxData" i need to fill in the start and the end date- as shown in Data sheet.
