Is there a way to use a wild card character in an excel formula? i.e have a formula =IF(AND(B2<>"",A2<>"Fax",A2>"Conference"),1,2) What I am looking to do is put a 1 if a cell starts with Fax or conference.
View 2 RepliesIn the table I've created, I have a column (column A) that contains "Y" for the first 20 rows. I'd like to use an if statement in another column (column B) to create a numbered list starting with the first row (from column A) that is blank. For example, if column A contains "Y" in the first 20 rows, I'd like starting in row 21 (in column B) to return a value of "1" and then have the subsequent rows increase in value by 1, so row 22 would be "2", row 23 would be "3" etc. The catch is, if for some reason I make a change in column, let's say extend the "Y"s down to row 25, I'd like column B to reflect those changes by starting the list in row 26.
View 3 Replies View RelatedI have a series of IF statements in a formula. I need one of the counters in it to start when the conditions is met.
i.e. the false section in an IF is along the lines of $B$3+J2, and then it continues down the column $B$3+J3 then $B$3+J4 etc. I need the J# to start increasing when the condition within the IF statement is met, not from the very beginning. When I get to, let's say the 13th row, when the condition is met, I want J2, not J13or14.
I have a large range of data and on each row the cells contain either 0, 1, No or another word. I would like to display the other word at the start but im really stuck on how to do it. This other word can change on each row but each specific row will only have one word. I can post a sample spreadsheet if necessary.
View 5 Replies View RelatedI am currently using an Intersect statement in a worksheet module to perform two things:
1. Insert a time stamp into row 2 when row 1 has a price inserted
2.To clear that time stamp if the price is deleted at some later date.
My problem is with the time stamp value being deleted by the user.
If I try to clear the price (now that the time cell =empty) I get a Runtime error 91 - Object Variable or With block variable not set.
I would like to convert this code to a select case statement but I'm not sure how to do this in this situation. Would error coding be appropriate in this instance?
I'm trying to set up an if statement that will recognize that if a cell is FHR it will do something...but if it's PHR it will do something else. I think I found the place where I keep getting an error but I'm not sure how to go about fixing the issue.
View 2 Replies View RelatedI am attempting to use a previously Set variable as part of the next Set statement, pretty unsuccessfully at present.
My purpose is trying to look up
Code:
tb_SelJobID.Value
from a userform in Col Z then look across the row to Cols D,I,N,S & W (different types of work) to see if
Code:
TbSelYr.Value
matches the year selected then insert a formula in the row to the left. Then loop down to the FinalRow.
Currently my Set Found1 statement does not recognise my Found10 value. I know it will be my syntax as it always is. I have cut down the following code to display where the problem areas are, Found1 thru 5.
Code:
Sub CmdGo3_Click()
Dim Row As Range
Dim FinalRow As Long
Dim Found1, Found2, Found3, Found4, Found5, Found10 As Range
Application.ScreenUpdating = False
[code]....
Windows 7 with Excel 2010
I have an Excel Sheet which I use as Database. The database has 11 columns and I insert data with the following function:
Code:
Sub testInsert()
Dim adoCommand As New ADODB.Command
Dim sQuery As String
Dim i As Integer
Dim strTest As String
strTest = "test"
[Code] .......
Now I want to retrieve this data. i.e. I want all F1 where F2 and F3 are 0 AND I want them ordered descending. I'm trying to achieve this with:
Code:
Sub testSelect()
Dim adoCommand As New ADODB.Command
Dim sQuery As String
Dim mrs As New ADODB.Recordset
Dim strTest As String
strTest = "test"
[Code] ....
The result I am getting looks like this:
9
8
7
6
5
4
3
2
15
14
13
12
11
10
1
I assume, that the data is interpreted as String instead of an integer. But I explicitely stated the data as Integer when storing the data into the DB.
I have created a very long switch statement, which is too long to be placed in one row in VBA. I have attempted to put a space and underscore at the end of one line and continue the statement on the row below by placing a comma at the start of the second line. VBA will accept my efforts, but when I run the statement in the immediate window, the following error appears.
"Invalid procedure call or argument"
I understand that there are certain rules where I can split a switch statement onto two lines, yet I do not know what they may be.
I am looking to have one formula containing two If Statements that minus.
=IF(B6="investment",C6,0)-IF(B7="gross",C6,0)
So the result of If Statement 1 minus the result of If Statement 2.
What I am seeing at the moment in the cell is FALSE and what I want to see is the sum.
If A1 shows 10:00am and A2 shows 4:00pm, then A3 calculates the total number of hours: =(A2-A1)*24
But if A1 shows "Off," then A3 shows 0: =IF(A1="Off",0,(A2-A1)*24)
Now, if I want to change "(A2-A1)*24" to another if-statement, how do I do this? I can always set up a hidden cell (A4) that contains the results of the first if-statement, and then say: =IF(A1="Off",0,A4). But can I do this without going through all the trouble of setting up hidden cells?
Each row represents a call. If a call in column A equals "CW" and it has the highest duration (H:MM:SS) value in column B, then provide me the date (MM/DD/YYYY) for that call that is stated in column C.
i.e.
Column A --- Column B ---- Column C
AB ------------ 0:02:22 ----- 04/14/2007
CW ----------- 0:03:13 ----- 04/16/2007
CW ----------- 0:01:42 ----- 04/13/2007
Thus, the value that should be returned is "04/16/2007".
I have a problem with a formula inserted with control+shift+enter
The formula is
MEAN(IF(' VALIDATION'!$G$2:$G$59999=D30;'VALIDATION'!$E$2:$E$59999))
In the Validation sheet I have the column G with values 0 and 1, and another column E with numeric values.
Changing the value of cell D30, the formula will calculate the mean of the values in column E that have a value equal to D30 in column G.
The problem is that this function works when D30=1 and not when d30=0, in this case the formula returns N/D.
I have tried using also text values instead of 1 and the formula works . The problem is only when D30 is 0
I am trying to have a cell in sheet "Summary" count the number of cells in column DX of sheet "Analyses" that are greater than 0, provided that the value in column A of "Analyses" corresponds with the value in B8 of sheet "Summary."
(In "Analyses," there are 106 subjects, each taking up 64 rows. So, columns 1-64 correspond to Subject 1, columns 65-128 correspond to subject 2, etc. In column DX, each subject has 64 values that are either 0 or greater than 0. In "Summary," each subject has one row that summarizes the 64 trials. I want a single cell in the "Summary," sheet to reflect the number of times each subject produces a value greater than 0 in column DX of "Analyses.") I tried using this formula, but it did not work correctly:
=COUNTIF(IF(Analyses!$A$1:$A$10000=Summary!B8,Analyses!$DX$1:$DX$10000,""),">0")
(Summary!B8 = 1, so I am trying to calculate the number of values in DX that are greater than 0 only for subject 1.) When I press enter, this yields a value of 384. This is impossible, given that subject 1 only has 64 possibilities of yielding a value greater than 0. Subject 1 has 2 values in column DX that are greater than 0. I tried making this an array formula by pressing Shift+Ctrl+Enter, and that just gives me a #VALUE! error.
I currently have a number of spreadsheets with number data in it. I need to import it into a third party program. Unfortunately when this program imports it it counts numbers such as 1 as 1.0. This third party program says the only way around this is to put a ' before the numbers and this seems to fix the problem. My problem is that I have so much data I cannot go through ever cell and add a ' to the start. IS there a quick way to add ' to the start of certain cells?
View 4 Replies View RelatedI have a macro, at the end of which I'd like it to jump to a second macro OR incorporate the second macro into the 1st. I've tried combining them in several different ways, but get an error 13 every time. So, basically, if I can't combine them into 1 macro, then perhaps I can get the 1st to automatically start the second. The 1st code is based on a previous solution (for a different problem!) I received from this forum
Here is the 1st
I have a workbook that is set to show a form on startup and then the code tells excel to be visible = false. How ever i have disabled the close button on my form therefore i have stuffed my program up and cant edit it at all.
View 3 Replies View RelatedI have a macros that copy’s certain bits of data forma row, then copies it to another sheet, however I always need it to start in column A. E.g. if my active cell is C3, I want to start in A3, likewise if the active cell is E3, I want to be able to start in A3.
View 13 Replies View RelatedI have a formula that adds two numbers. Here it is:
=IF(E10="","",(E10+$C$8))
I don't want the numbers to be more than 360 when added up. When it reaches 360, I want it to start over from zero. Instead of, say, E10 = 200 and C8 = 200 ... I don't want the answer to be 400, I want it to be 40.
I want my system to run a macro automatically every time its turned on.
View 9 Replies View RelatedI'm sure I just need a change in the line of code in red, but can anyone see why when the code reaches the For/Next loop in red it just jumps over it and goes to the End With line?
FYI - The code is supposed to check (select) the boxes in ListBox1 if any item in the list it's creating matches the value found in Sheets("Zone Associations").Cells(Rng, sZone)
I am trying to record macros, however, without success. When I launch Excel, two spreadsheets, PERSONAL and Personal Macro Workbook are launched. However, when I attempt to record a macro in a new spreadsheet, I get an error message, "Personal Macro Workbook in the startup folder must stay open for recording".
Looking in the XLSTART folder, I see two files, as noted above.
I have a spreadsheet that I access over a citrix network, when I opened it at the start it gave me an option to enable or disable refresh external data, also enable or disable macros both of these are gone now and I have searched the net to find a way to get them back.
View 2 Replies View RelatedI have an excel file which automatically loads an user form once the file is opened and when the user form is closed, the file also closes. When the file is open i am not able to switch to anyother excel file because this userform is active. Is there a way, when i open the file with userform, a New excel application starts. So that i can use the other excel files opened by the previous excel application.
View 4 Replies View Relatedhow to start and name a new project in Excel VBA. Will someone explain how to?
View 3 Replies View RelatedHow to sum using variable start and end points?
For example,
Column A is the list of start dates, and Column B is the list of end dates to be used at the variables.
Column C is a list of dates, and Column D is the corresponding temperature data to Column C.
What I would like to do is create a new column (E) that sums the temperature data from Column D based on the start and end dates from Column A and B respectively (these dates to be used to match the dates in Column C).
I have a program that requires the last 8 days to be total, unless there are 2 days off in a row. So my cells need to sum the previous 8, but then stop when two zeros show in the column and then restart following. One zero should continue to total the previous 8 days. As shown below, for 1/10/14 I should see 57.5. The sum needs to restart on 1/13/14 to show a total of 10.5. I have tried multiple formulas with no luck.
Col A Col B
1/5/140
1/6/1412
1/7/1412
1/8/1412
1/9/1411
1/10/1410.5
1/11/140
1/12/140
1/13/1410.5
1/14/1411
1/15/1411
I have a data which has a start time, end time, Stay Time(End-Start) and # of subjects. I am trying to create a graph, line, bar or histogram which shows how many subjects were there at a specific time. So the horizontal axis would have time from 00:00 to 24:00 and vertical axis would have the total # of subjects or the %.
Start End Subject Stay
01:00 02:00 1 01:00
01:00 01:45 1 00:45
02:00 21:00 1 19:00
03:10 14:10 1 11:00
The data set is huge(27000 rows) and I am using excel to create a graph.
I have tried using line plots and bar charts(stacked) but couldn't. I am not sure if there is an easier way to do it .
I have this column with a value like 04/06/2008. I will want another of the column to auto generate the date for the start of the week like 02/06/2008 which is a Monday.
Need a formula that will generate the ending date of task, adding therefore if needed the number of weekend(s) in between the start and end date to the End date.
Let us say: task is starting in 2008/11/11 the duration of the task is 7 days. So, we should get an End Date= 2008/11/19.
2008 11/11 11/12 11/13 11/14 11/15 11/16 11/17 11/18 11/19
Tue Wed Thu Fri Sat Sun Mon Tue Wed