Form: Textbox Navigation
Jul 4, 2009
I have a form set up with excel (2003) using vba. I'm doing a check to see if textbox1 is empty, if it is, a msgbox pops up with a warning that "textbox1 needs to be filled out". I click OK and the cursor goes to textbox2. I want the cursor to return to texbox1 without user intervention but can't figure out how. I'm using "Private Sub TextBox1_Exit(ByVal Cancel As MSForms.ReturnBoolean)".
I know it can be done because I did it with vba Access, but I can't seem to find it using vba Excel.
View 8 Replies
ADVERTISEMENT
Feb 17, 2007
creating this excel file with multiple comboboxes, i was wondering if i can add another into the equation. so i can have sub-categories.
i have attached the original file and how i would like to change the layout!
i also have another question, see with the info that would go into the textbox is there anyway you can put writing on seperate lines,
eg:
Lettuce
Mayo
Tomato
all within the same cell?
View 13 Replies
View Related
Jan 4, 2010
I need to use two types of fonts to not only display a string of characters in a textbox but also past to a cell as viewed in the textbox.
An example string:
[#|:.010(M)|A|N(M)|B(M)]
The above string in Arial font would look like this:
[TP|Ř.010(M)|A|N(M)|B(M)]
I am simulating a GD&T instruction (Geometric Deimensioning and Tolerancing).
My dilema stems from the first character "[" and the last character "]".
I use both of these characters to open an instruction and close the instruction (as if all characters are surrounded by a rectangle).
What I cant figure out is how to isolate the first "[" and the last "]" (They will always be the first and last characters of an unknown string length). The first "[" would be an "Arial font" and the last would be an "Arial font" everything in between is another font (in this case Verisurf).
See attached example jpg file.
"verisurf1.jpg"
Verisurf uses both "[" and "]" as alternate characters. I only need to capture the first and last character if: 1. The first is a "[" and or the last is a "]". They will never be vice~versa.
View 4 Replies
View Related
Feb 22, 2010
I have a UserForm that utilizes the Change event of a Textbox.
The form goes through some validating before any calculations happen.
My problem is if the user wishes to backspace, clear or perform any changes to this textbox, it bugs out.
Here's the
View 6 Replies
View Related
Aug 3, 2012
I have a spreadsheet that records data on various sites with data entered on a userform.
Every so often a site may need to be added or deleted. Is there anyway to use VBA to add an additional field to a Userform, and then also delete the field if necessary?
View 2 Replies
View Related
Feb 9, 2007
File attached
1) I have a user form that picks data from a spreadsheet - This is for scheduling a course. Works fine
2) I have a second form which should do 2 things:
a) On the bottom half of the form, select people from sheet 'Staff'. Works fine
b) On the top part, I would like to select a course (using combo box) and fromt this select a date for when the course has been scheduled (from sheet 'Scheduled Courses'). Courses are run a few times so have multiple entries. With some help, have done this and it works well
The problem is that when I select a date for a course using combobox2, I would like to populate the text box 6 & 7 with the cost of the course and the location. This goes wrong as it starts taking cost and location from the first cell. Eg when i select SPIN Selling, all is fine as this are the first courses. However If I take 7 Habits, it gives me costs for SPIN. If I take OM, it still gives me costs for SPIN. The dates in combo box 2 appear fine
View 4 Replies
View Related
Jan 2, 2008
What I've done so far is... Created two buttons (Add and Find) in my Excel sheet1. If I click my Add button Form1 opens. In Form1 the user enters a number of values that are inserted into sheet2 of my Excel book. If I click my Find button Form2 is displayed. This form contains a multicolumn textbox that shows some of the columns from sheet2 that have values in them. Now to my BIG problem....
I would like to be able to select a row in my multicolumn textbox, click my OK button there and then Form1 should be displayed with ALL the values from that particular row from sheet2. As I mentioned I'm very new at this and I'm not even sure how to do this logically and much less the correct code for it. I hope that someone could thoroughly explain to me what I have to do and why to be able to get this working.
Private Sub UserForm1_Initialize()
Dim rIds As Range
Dim MaxId As Long
Set rIds = Worksheets("Systemtest").Range(Cells(1, 1), Cells(Rows.Count, 1).End(xlUp))
MaxId = Application.WorksheetFunction.Max(rIds)
With Me
.IdBox.Value = MaxId
Private Sub DateBox_Change()
DateBox = Format( Date, "yy/mm/dd")
End Sub.....................................
View 2 Replies
View Related
Feb 10, 2013
How can I allow users to either select the SKU from the dropdown menu, or to type in the SKU # in the dropdown menu (C5 through F5) and have it populate the data fields for that SKU when they press the 'Enter' key?
Currently using Data Validation ='KVM Comparison Data'!$B$4:$OP$4 and cell logic to allow the information to be pulled from a hidden tab =INDEX('KVM Comparison Data'!$D$2:$OP$65,MATCH('KVM Product Comparison'!$B6,'KVM Comparison Data'!$A$2:$A$65,0),MATCH('KVM Product Comparison'!C$5,'KVM Comparison Data'!$D$4:$OP$4,0))
In short, I want to keep it the way I have it, but allow users to also have the option of typing in a SKU and pull the data up that way. I know this is possible, I just can't figure out how to do it, while keeping my current solution in place as well.
View 1 Replies
View Related
Nov 11, 2011
why the text box "txtjobnum" wont populate with the active cell in my "COMPLAINTS" sheet. The green code below is in the userform and the red text below that is in module 3.
Private Sub cancel_Click()
Unload Me
End Sub
[Code]....
View 2 Replies
View Related
Jan 14, 2012
I have this code inside a userbox to auto populate a textbox on the same form, the combibox info is located on row E, and it populates the textbox with info off row G, but how can I change this to pull the info off row C instead of G???
Code:
Private Sub ComboBox1_Change()
var1 = WorksheetFunction.VLookup(ComboBox1.Value, Worksheets("Basic").Range("E11:G90"), 3, False)
TextBox1 = var1
End Sub
View 3 Replies
View Related
Jul 26, 2012
i have workbook that has form to login
what i need is how to get the data from textbox every time user login(fill the textbox) ,and put it in specific sheet with range.offset ?
View 6 Replies
View Related
Jan 28, 2013
I have written the following snippet in my code, the purpose of which is to cycle through the text boxes on a form (frmPaymentOrders) and transfer the value of each text box txtPO1 to 10 to the variable PORow (Dim as Long). These will then be pasted into the correct part of my worksheet.
But I keep getting an "Invalid Qualifier" error - even though I think I have correctly qualified the PORow variable as Long.
Code:
For i = 1 To 10
PORow.Value = ["frmPaymentOrders.txtPO" & i]
Next i
View 7 Replies
View Related
Aug 11, 2008
After a bunch of false starts I am not getting very far and after searching the message board have failed to come up with the right clue.
I am trying to create some vba code that would use input from a form to create a file name that would save the file in the current folder.
e.g. Foghorn Leghorn expenses Aug 10 2008.xls
I am using calendar control named “calendarFinal” and a text box named “txtName” . The text box to show the user the suggested file name is txtFileName.
Among other things, the date from the calendar control gives a date like 08/08/2008 and I suspect that the slashes are going to give me grief.
A confirmation message box would be nice. (vbOk?)
View 9 Replies
View Related
Jan 19, 2007
I have a form that pulls up. When the person enters in a ticker symbol I would like the VBA code to perform a lookup in a range "Data_Company_Names" (3000 lines long of company ticker sybols and names) and use the corosponding Name to fill in the textbox for the name. If no Ticker symbol is found then the textbox would be blank.
I realize I would have to use some type of Private Sub TextBox1_Change() code but I am not sure how to have it lookup in a range and return the corosponding name to the ticker. For example, when the form pulls up and the person enters AAPL in Textbox1 then Textbox2 value should equal the Apple which is the company name located in the column over from AAPL in range Data_Company_Names
View 2 Replies
View Related
Aug 13, 2008
I want one procedure that will validate the CURRENT textbox (not named by name, to allow for the procedure to be included in the change event of several different textboxes), to see if it is numeric (decimal places allowed) in Excel 2007.
I followed the instructions here: {url}, which describe exactly what I want to do. So I put the final procedure listed on that page (the dynamic validation code) into the private module of the user form object as listed below:
Private Sub pipes_Change()
OnlyNumbers
End Sub
Private Sub OnlyNumbers()
'This procedure checks to see if the value
'of the current textbox is a number or not
If TypeName(Me.ActiveControl) = "TextBox" Then
If Not IsNumeric(.Value) And .Value <> vbNullString Then
MsgBox "Sorry, only numbers are allowed."
.Value = vbNullString
End If
End With
End If
End Sub
I then ran the form and typed a number into the "pipes" textbox that had been validated. A compile error is thrown: "Invalid or unqualified reference", highlighting the ".Value" portion of IsNumeric. I tried to remove certain parts of the code, such as the IF statement and the "And .Value <> vbnullstring", but nothing works. I have a feeling it is because this code was created for Excel 2003 (though I'm not certain).
View 7 Replies
View Related
May 5, 2009
Error Help.xls. An example is attached. If you open the attachment, you can see that I'd like to choose a date from the combobox and have the corresponding "date code" (that's what I'm calling it - it's for a different, more complex purpose) appear in the text box. For this to happen, I'm using the following
View 2 Replies
View Related
Jul 3, 2009
I have a form that adds and edits data on a sheet. I would like the user to be able to select any row of that data and then a macro copies the data from column A for example (ID1234). Launch my form (FmAddTask) and then paste it into the combocbox (idlookup).
Hence enabling immediate editing of that row of data via the form.
I made a start:
View 2 Replies
View Related
Oct 21, 2009
I have a question regarding frames and textboxes on a user form.
I have a user form that has a number of textboxes populated from the results two Comboboxes.
I decided to group some of the textboxes in frames for more logical viewing.
I grouped the textboxes, moved them, placed two frame controls on the form then, finished by replacing the grouped textboxes. No code was altered or added.
When I ran the form, only the Comboboxes were functional and the text boxes were blank.
There were no runtime errors or compile problems.
View 5 Replies
View Related
Oct 10, 2013
I am writing a macro to automate the filling up some data from excel to company website. I have changed the website name in this post for data protection purpose. The excel will login for different clients by using the combination of username and password for respective clients and then some data are required to be inserted in a text box on a web page, I think the text box is on a form and form is within an iframe, within the web page. Once the data is inserted into text box, one button (Submit), which is also on the same form, is to be clicked.
On the click of a button, the updated data appears on another section, I could not make out if it is an form or frame, which is under the abovementioned form. Once we are happy with the way data appears on the web page, we have to click another button (Update), which is on the same section, to finally updating the data on website.
I wrote the following code to login to the website and then to navigate to the web page where I have to fill up the performance numbers in a text box.
The first problem is how to access the text box inside the form from VBA so that the macro can write a number in that text box and how to access the button to submit the data. The HTML code, which can be seen on click of F12, is attached below.
The second problem is how to access the Update button inside the other section, so that the data will be finally uploaded.
VB:
Sub LoginToCorpAccount()
Dim ie As Object
Set ie = CreateObject("InternetExplorer.Application")
[Code]......
View 2 Replies
View Related
Jan 26, 2014
I have a userform with numerous text boxes. One textbox is used to input a date with the following code
[Code] .....
When I have completed my userform I want to export this date as a date into range(a2) so I can then use the filter function to filter by month or year. THe problem I am having at the mo is that in the userform it is formatted as dd mm yy, but when I export it from userform it changes to mm,dd,yy. So if I entered 12th January 2014 it changes it to 1st December 2014.
A workaround is to export as text but then I use the filter by month year function so would prefer to avoid this.
View 1 Replies
View Related
Jan 23, 2014
I am created Financial Worksheets. . . ex. Balance Sheet, Income Statement, Cash Flows, Notes, Forecasted Sales Etc. and I want to make a GUI in-order to navigate easily. I already included Hyper Links to it for some detailed annexes.
View 4 Replies
View Related
Jun 16, 2006
I am trying to edit the Copy menus so that they only paste values. I have the following code in the workbook object:
Private Sub Workbook_WindowActivate(ByVal Wn As Excel.Window)
Application. CommandBars("Edit").Controls.Item("Paste").OnAction = "New_paste"
Application.CommandBars(" Cell").Controls.Item("Paste").OnAction = "New_paste"
End Sub
Private Sub Workbook_WindowDeactivate(ByVal Wn As Excel.Window)
Application.CommandBars(1).Reset
End Sub
and this code in a module:.........
The module code is however bringing up an error message 'User-defined not defined' and I am not sure why.
View 2 Replies
View Related
Sep 9, 2009
I want to create a floating window in excel that can contain a series of macro buttons (12 total)
I'd like to see if this window can be opened with a hyperlink or a single macro button on a spread sheet.
View 11 Replies
View Related
Apr 4, 2012
I would like to have a "PREVIOUS" navigation button in a workbook that goes back to the previously activated worksheet, which may or may not be physically the previous worksheet in the workbook. In other words, if I go from Sheet #1, to Sheet #3, to Sheet #5, I'd like to return to Sheet #3 from Sheet #5 (rather then navigating back to Sheet #4).
"Open VB editor and double click 'Thisworkbook' and paste this code in on the right:
Private Sub Workbook_SheetDeactivate(ByVal Sh As Object)
lastsheet = Sh.Name
End Sub
Then right click 'ThisWorkbook' and insert module and paste this code in
Public lastsheet As String
Sub Select_Last()
Sheets(lastsheet).Select
End Sub
Whenever a user changes sheets, the name of the last sheet is now held in the variable 'Lastsheet' so if you assign a shortcut or button to the code then the last used sheet will be selected."
My problem is that when I want to assign the macro, I can't find macro name that looks anything like the above in the drop down list of Macro Names. how to assign the macro to a button?
View 5 Replies
View Related
Aug 23, 2005
I am trying to use the combo box feature to navigate between sheets. In other words, I have a dropdown menu at the top of each sheet ("Main Menu," "Goals," etc.) and am trying to work out a macro that directs the user to whichever sheet is selected. Is this possible?
View 9 Replies
View Related
Jul 29, 2008
What i want to do is create a drop down list in excel on a single sheet to navigate to a certain row of the worksheet.
I thought i coudl use data validation then use some code in a worksheet change event to skip to that section like this:
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address = "$D$1" Then
Select Case Target.Value
Case "Test1"
Sheets("Sheet1").Range("A5").Select
Case "Test2"
Sheets("Sheet2").Range("A9").Select
End Select
End If
End Sub
Problem is it wasnt exactly what i was looking for as i cant use an array in data validation so what i thought was a good idea was a bad one.
what i would like is a drop down list that when i select a heading within it, it naviagtes me to that row where my heading is but also makes that row the row scroll up so it is at the top of the page....Hope this makes sense.
my row numbers are 4, 13, 19, 28, 37, 43, 52 62, 65 and 75.
View 9 Replies
View Related
Jul 9, 2006
i would like the other tabs to be still visible to the user (so not hidden), but they should not be able to go to those sheets. (clicking on their name should so nothing)
View 9 Replies
View Related
Aug 30, 2006
I'm going to be creating a workbook that contains a worksheet for each year. Within each worksheet, I will have a calendar format that contains a range for each month of the year (multiple columns and multiple rows). Is it possible to name areas based on month and then create a button or drop down list at the top that would allow users to select the month and the view would go to that area within the calendar?
View 2 Replies
View Related
May 13, 2007
I have 2 reports on one worksheet. I have put a button at the top of each report to navigate back and forth. One report is located at a1:S27 - it shows up fine. The issue is the other report located at BA1:BT52. No matter where I assign a name to it the report doesn't come up full page with cell BA1 at the top left hand corner.
View 3 Replies
View Related
Jul 24, 2007
I have a large table where rows are added by copying either the top row or the bottom row and adding it to the bottom of the table. Below is the coding I was hoping to use to jump from cell to cell within the rows using a hotkey assigned to the macro.
Is it possible to apply the following code in a way that copies the same hotkey targets from row to row?
In other words, a row copied from row 1 to row 2 would still have functioning targets of A2, D2, L2 and Q2.
Select Case ActiveCell.Address
Case Is = [A1].Address: [D1].Select
Case Is = [D1].Address: [L1].Select
Case Is = [L1].Address: [Q1].Select
Case Else: [A1].Select
End Select
View 3 Replies
View Related
