Using Variables In VBA Loops To Get Form Textbox Contents

Jan 28, 2013

I have written the following snippet in my code, the purpose of which is to cycle through the text boxes on a form (frmPaymentOrders) and transfer the value of each text box txtPO1 to 10 to the variable PORow (Dim as Long). These will then be pasted into the correct part of my worksheet.

But I keep getting an "Invalid Qualifier" error - even though I think I have correctly qualified the PORow variable as Long.

Code:
For i = 1 To 10
PORow.Value = ["frmPaymentOrders.txtPO" & i]
Next i

View 7 Replies

Loops And Variables

Nov 10, 2009

I'm trying to better understand loops and variables. I have an instance I'd like to try and implement but I'm struggling with it. I know how to set a variable as 1 and loop through the code increasing the number each time but this one is a little different.

At the start of my code, I scan the worksheets for the worksheet names -

Monday
Tuesday
Wednesday
etc etc

and then assign these worksheets as

Monday = ws
Tuesday = ws2
Wednesday = ws3
etc etc

That way in my code I can do things to the workbooks like -

ws.Range("D4").Value = "blah blah"
and always know it will be tackling the right worksheet regardless of the sheets position in the workbook or sheetcode.

Well I have lots of changes to make on each of these sheets (Monday -> Sunday) which are identical. What I'd like to do is something like this -

For each VARIABLE in (MY VARIABLES WS,WS2,WS3 ETC)
VARIABLE.Range("D4").Value = "blah blah"
Next VARIABLE

View 9 Replies View Related

Variables In For Loops

Oct 14, 2006

Is it possible to use a variable to change a controls name in a For Loop? I have several worksheet combo boxes that have the same root name, e.g., cbobox1, cbobox2. cbobox3, etc. I want to be able to keep the main name and change the numeric part in a for loop and also perform some function with the control. For example:

For x = 1 To 10
Worksheets("Name").cbobox(x).Clear
Next x

View 6 Replies View Related

Match And Copy: Declare The Variables Correctly And Have The Operations Done In A Series Of Do/ Loops Or For/Nexts

Feb 2, 2007

I have a series of operations to carry out and, while I can do the code for each individual one, how to declare the variables correctly and have the operations done in a series of Do/ Loops or For/Nexts. Especially the declaring of named ranges as variables. Also a bit uncertain of the best way to find and coy the match. I have attached a simplified version of the workbook, with explanations on it.

Basically what I need to do is loop through a series of named ranges and then loop through the names in each, match each name with a name in a master list (with a flag as an image), add an e-mail hyperlink to that flagged name and copy both to a new cell.

View 2 Replies View Related

Store Variables Selected In List Box Form

Jun 13, 2008

how to store the variables selected in a list box for future use in the macro?

I've got code as follows:

This is in my main module

'These set up the global variables
Public SelectedRegion As Variant 'I've also used string
Public NewTabName As Variant 'I've also used string

'This links the list box to the values in a hidden tab named "Regions" and shows the form
WSForm.RgList.RowSource = "Regions!A1:A10"
WSForm.Show
This is in my coding for the form itself (list box & buttons)

'Code for my "Cancel" button
Private Sub cmdCancel_Click()
Unload Me
End Sub

View 9 Replies View Related

Export Contents Of Textbox

Sep 24, 2008

I have a textbox which displays a lot of text and I would like a VBA procedure which exports this text to a text file (.txt).

View 9 Replies View Related

Replicate Textbox Contents In Another Textox?

Jun 14, 2013

So I have a need to enter multi-line notes. Using a merged cell not working for me so thinking best to use a Textbox.

This works fine for entering the notes but I need to replicate the content on another Tab in the same Excel workbook.

So lets say I have named my Texboxes 'Textbox1' on one tab, and 'Textbox2' on another tab...... how do I replicate the contents?

I've tried putting =Textbox1 into 'Textbox2' like you would for a normal Cell but that does not work.

View 5 Replies View Related

Storing Textbox Contents In Array

Feb 13, 2012

I've created a textbox, call it Textbox1, where I've set EnterKeyBehavior and WordWrap to be true. If someone types something like

apples
bananas
cherries

in the textbox, and I use the following code

Code:

Dim TextBoxVal as String
TextBoxVal = Textbox1.Value
then TextBoxVal will be applesbananascherries.

I'd like to have the array be something like

apples,bananas,cherries, or
applesX_X_XbananasX_X_Xcherries,

or something else so I can tell when the user has hit the enter key. Is there any way to do this?

View 3 Replies View Related

Copy Cell Contents To Textbox?

Mar 9, 2012

I would like to copy the contents of a cell from a sheet in workbook 1 into a textbox that is on a userform in workbook 2. This is what I have but I get a runtime error 438:

Code:
ActiveWorkbook.Sheets("ID").Range("a1") = Workbooks("Key.xlsm").userform1.TextBox1.Text

View 8 Replies View Related

Check Textbox Date Contents?

Jul 23, 2012

I need to confirm that a date is entered correctly into a userform.

This code works for a command button, but not for a WorkSheet_Change event.

My textbox is the first in the userform, and needs to be checked immediately, as the labels in the rest of the userform all change to reflect the date that was entered.

What is the best way to do this? I tried a keycode = vbKeyReturn option, but cannot get it to work?

Code:
Private Sub DateCheck()
Dim DateString As String
Dim DateProper As Date
Dim EntryOK As Boolean
EntryOK = False

[code]....

View 8 Replies View Related

Contents Of TextBox Depends On CheckBoxes

Aug 15, 2012

I have 4 checkboxes and if they are all unchecked then I need some text in the textbox. If even one of them is checked, then some other text in the text box.

Here is the code that I have been playing with:

Code:
Private Sub TextBox2_Change()
Dim check As OLEObject
Set check = Sheets("Sheet1").OLEObjects("CheckBox1,CheckBox2,CheckBox3")

[Code].....

View 5 Replies View Related

VBA: How To Copy Contents Of *.txt File To Textbox

Apr 30, 2007

I have created a string that contains the absolute path to a text file. Using VBA how would I move the text within this text file into Textbox1 on Sheet1?

I am just looking for basic code.

View 9 Replies View Related

Copy Contents Of Worksheet Textbox To Another

Aug 13, 2008

I have a multiple sheet workbook designed to collect information which is all collated on the last sheet. On one sheet I have a textbox (not the drawing textbox) which is designed to take a string of characters of a specific lenght (150chars) and works well. I'm just trying to get the code to work with a textbox on the same sheet for now, then when its working change it to copy over to another sheet.

Sub TextBox_To_TextBox()
Dim x As Integer
Dim PreEmp As TextBox, PreEmp2 As TextBox
Dim theText As String
Set PreEmp = ActiveSheet.TextBoxes("PreEmp")
Set PreEmp2 = ActiveSheet.TextBoxes("PreEmp2")
For x = 1 To PreEmp.Characters.Count Step 150
theText = PreEmp.Characters(Start:=x, Length:=150).Text
PreEmp2.Characters(Start:=x, Length:=150).Text = theText
Next
End Sub

I'm calling the sub routine but nothing seems to happen.

View 3 Replies View Related

Populate Cells With Contents Of TextBox Controls

Sep 12, 2006

I am trying to populate the first 12 columns in the last row of the active sheet from 12 UserForm TextBoxes (TB5 thru TB16). Here is the

With Range("A65536").End(xlUp)
For i = 1 To 12
.Offset(0, i - 1).Value = Me.Controls("TB" & i + 4).Value
MsgBox "Cycle " & i
Next i
End With

The MsgBox returns a "Cycle 13" only once. The Row has the first column filled but none of the rest. I am trying to load TB5 thru TB16 into columns A thru L of the last row (the last row was copied down to get the formatting and this code was supposed to over write the copied data and leave the formatting). But only TB5 loads into Column A!

View 6 Replies View Related

Form: Textbox Navigation

Jul 4, 2009

I have a form set up with excel (2003) using vba. I'm doing a check to see if textbox1 is empty, if it is, a msgbox pops up with a warning that "textbox1 needs to be filled out". I click OK and the cursor goes to textbox2. I want the cursor to return to texbox1 without user intervention but can't figure out how. I'm using "Private Sub TextBox1_Exit(ByVal Cancel As MSForms.ReturnBoolean)".
I know it can be done because I did it with vba Access, but I can't seem to find it using vba Excel.

View 8 Replies View Related

Insert Contents From Textbox In Alphabetical Order In Document

May 23, 2008

I am in the middle of writing my first macro using VBA, and have come to a point where I have no idea how to write a piece of code.

Here is an explanation of what the relevant section of the document looks like:

The following is all in Column A: ....

View 9 Replies View Related

Multiple Combobox > Textbox Form

Feb 17, 2007

creating this excel file with multiple comboboxes, i was wondering if i can add another into the equation. so i can have sub-categories.

i have attached the original file and how i would like to change the layout!

i also have another question, see with the info that would go into the textbox is there anyway you can put writing on seperate lines,

eg:
Lettuce
Mayo
Tomato

all within the same cell?

View 13 Replies View Related

(Form TextBox) Multiple Fonts

Jan 4, 2010

I need to use two types of fonts to not only display a string of characters in a textbox but also past to a cell as viewed in the textbox.

An example string:

[#|:.010(M)|A|N(M)|B(M)]

The above string in Arial font would look like this:

[TP|�.010(M)|A|N(M)|B(M)]

I am simulating a GD&T instruction (Geometric Deimensioning and Tolerancing).

My dilema stems from the first character "[" and the last character "]".
I use both of these characters to open an instruction and close the instruction (as if all characters are surrounded by a rectangle).

What I cant figure out is how to isolate the first "[" and the last "]" (They will always be the first and last characters of an unknown string length). The first "[" would be an "Arial font" and the last would be an "Arial font" everything in between is another font (in this case Verisurf).
See attached example jpg file.
"verisurf1.jpg"

Verisurf uses both "[" and "]" as alternate characters. I only need to capture the first and last character if: 1. The first is a "[" and or the last is a "]". They will never be vice~versa.

View 4 Replies View Related

User Form TextBox Events

Feb 22, 2010

I have a UserForm that utilizes the Change event of a Textbox.

The form goes through some validating before any calculations happen.

My problem is if the user wishes to backspace, clear or perform any changes to this textbox, it bugs out.

Here's the

View 6 Replies View Related

Add Additional Textbox To A Form During Runtime?

Aug 3, 2012

I have a spreadsheet that records data on various sites with data entered on a userform.

Every so often a site may need to be added or deleted. Is there anyway to use VBA to add an additional field to a Userform, and then also delete the field if necessary?

View 2 Replies View Related

Populate Textbox On User Form

Feb 9, 2007

File attached

1) I have a user form that picks data from a spreadsheet - This is for scheduling a course. Works fine

2) I have a second form which should do 2 things:
a) On the bottom half of the form, select people from sheet 'Staff'. Works fine
b) On the top part, I would like to select a course (using combo box) and fromt this select a date for when the course has been scheduled (from sheet 'Scheduled Courses'). Courses are run a few times so have multiple entries. With some help, have done this and it works well

The problem is that when I select a date for a course using combobox2, I would like to populate the text box 6 & 7 with the cost of the course and the location. This goes wrong as it starts taking cost and location from the first cell. Eg when i select SPIN Selling, all is fine as this are the first courses. However If I take 7 Habits, it gives me costs for SPIN. If I take OM, it still gives me costs for SPIN. The dates in combo box 2 appear fine

View 4 Replies View Related

Populate Form After Selection Of Row In Textbox

Jan 2, 2008

What I've done so far is... Created two buttons (Add and Find) in my Excel sheet1. If I click my Add button Form1 opens. In Form1 the user enters a number of values that are inserted into sheet2 of my Excel book. If I click my Find button Form2 is displayed. This form contains a multicolumn textbox that shows some of the columns from sheet2 that have values in them. Now to my BIG problem....

I would like to be able to select a row in my multicolumn textbox, click my OK button there and then Form1 should be displayed with ALL the values from that particular row from sheet2. As I mentioned I'm very new at this and I'm not even sure how to do this logically and much less the correct code for it. I hope that someone could thoroughly explain to me what I have to do and why to be able to get this working.

Private Sub UserForm1_Initialize()
Dim rIds As Range
Dim MaxId As Long
Set rIds = Worksheets("Systemtest").Range(Cells(1, 1), Cells(Rows.Count, 1).End(xlUp))
MaxId = Application.WorksheetFunction.Max(rIds)
With Me
.IdBox.Value = MaxId
Private Sub DateBox_Change()
DateBox = Format( Date, "yy/mm/dd")
End Sub.....................................

View 2 Replies View Related

Change Userform Textbox Back Colour If Contents Are Percentage

Jul 14, 2012

I need to change the backcolour of some textboxes on a userform that is populated with percentage figures from a sheet, ie:

10% (a positive percentage) textbox backcolour = red
-10% (a negative percentage) textbox backcolour = green

Below is some code showing my attempts up to now, but obviously I can't make it work.

VB:
Private Sub Textbox1_Change()
If Me.Textbox1.Value < 0 Then
Me.Textbox1.BackColor = vbGreen
Else
Me.Textbox1.BackColor = vbRed
End If
End Sub

View 5 Replies View Related

Free Form Textbox In Search Field

Feb 10, 2013

How can I allow users to either select the SKU from the dropdown menu, or to type in the SKU # in the dropdown menu (C5 through F5) and have it populate the data fields for that SKU when they press the 'Enter' key?

Currently using Data Validation ='KVM Comparison Data'!$B$4:$OP$4 and cell logic to allow the information to be pulled from a hidden tab =INDEX('KVM Comparison Data'!$D$2:$OP$65,MATCH('KVM Product Comparison'!$B6,'KVM Comparison Data'!$A$2:$A$65,0),MATCH('KVM Product Comparison'!C$5,'KVM Comparison Data'!$D$4:$OP$4,0))

In short, I want to keep it the way I have it, but allow users to also have the option of typing in a SKU and pull the data up that way. I know this is possible, I just can't figure out how to do it, while keeping my current solution in place as well.

View 1 Replies View Related

Active Cell Won't Populate Textbox On Form

Nov 11, 2011

why the text box "txtjobnum" wont populate with the active cell in my "COMPLAINTS" sheet. The green code below is in the userform and the red text below that is in module 3.

Private Sub cancel_Click()
Unload Me
End Sub

[Code]....

View 2 Replies View Related

Userbox - Auto Populate Textbox On Same Form

Jan 14, 2012

I have this code inside a userbox to auto populate a textbox on the same form, the combibox info is located on row E, and it populates the textbox with info off row G, but how can I change this to pull the info off row C instead of G???

Code:
Private Sub ComboBox1_Change()
var1 = WorksheetFunction.VLookup(ComboBox1.Value, Worksheets("Basic").Range("E11:G90"), 3, False)

TextBox1 = var1
End Sub

View 3 Replies View Related

Get Value From Textbox At Form And Put It In Specific Sheet With Offset

Jul 26, 2012

i have workbook that has form to login

what i need is how to get the data from textbox every time user login(fill the textbox) ,and put it in specific sheet with range.offset ?

View 6 Replies View Related

Save File Name From Textbox & Calendar In Form

Aug 11, 2008

After a bunch of false starts I am not getting very far and after searching the message board have failed to come up with the right clue.

I am trying to create some vba code that would use input from a form to create a file name that would save the file in the current folder.

e.g. Foghorn Leghorn expenses Aug 10 2008.xls

I am using calendar control named �calendarFinal� and a text box named �txtName� . The text box to show the user the suggested file name is txtFileName.

Among other things, the date from the calendar control gives a date like 08/08/2008 and I suspect that the slashes are going to give me grief.

A confirmation message box would be nice. (vbOk?)

View 9 Replies View Related

Lookup Based On Input Into Textbox On Form

Jan 19, 2007

I have a form that pulls up. When the person enters in a ticker symbol I would like the VBA code to perform a lookup in a range "Data_Company_Names" (3000 lines long of company ticker sybols and names) and use the corosponding Name to fill in the textbox for the name. If no Ticker symbol is found then the textbox would be blank.

I realize I would have to use some type of Private Sub TextBox1_Change() code but I am not sure how to have it lookup in a range and return the corosponding name to the ticker. For example, when the form pulls up and the person enters AAPL in Textbox1 then Textbox2 value should equal the Apple which is the company name located in the column over from AAPL in range Data_Company_Names

View 2 Replies View Related

Numeric Validation Of User Form Textbox

Aug 13, 2008

I want one procedure that will validate the CURRENT textbox (not named by name, to allow for the procedure to be included in the change event of several different textboxes), to see if it is numeric (decimal places allowed) in Excel 2007.

I followed the instructions here: {url}, which describe exactly what I want to do. So I put the final procedure listed on that page (the dynamic validation code) into the private module of the user form object as listed below:

Private Sub pipes_Change()

OnlyNumbers

End Sub

Private Sub OnlyNumbers()
'This procedure checks to see if the value
'of the current textbox is a number or not

If TypeName(Me.ActiveControl) = "TextBox" Then

If Not IsNumeric(.Value) And .Value <> vbNullString Then

MsgBox "Sorry, only numbers are allowed."

.Value = vbNullString

End If

End With

End If

End Sub

I then ran the form and typed a number into the "pipes" textbox that had been validated. A compile error is thrown: "Invalid or unqualified reference", highlighting the ".Value" portion of IsNumeric. I tried to remove certain parts of the code, such as the IF statement and the "And .Value <> vbnullstring", but nothing works. I have a feeling it is because this code was created for Excel 2003 (though I'm not certain).

View 7 Replies View Related