Right, sorry this is probably a simple one but I can't do it... I have information in a variable that is "1-4" the variable is defined as a String but whenever I use the following code excel turns it into a date.
View 2 RepliesHow to stop my 100% from changing to 1000% after it pastes?
Here's the pc of code that is performing the copy/paste from one sheet to another sheet within the same workbook..
Code:
With Sheets("BOM Worksheet").Range("C" & nr)
.Value = c.Offset(, -16).Value
.Font.FontStyle = "Bold"
.Font.Color = RGB(186, 85, 211)
End With
I have a userform which is used to update a spreadsheet.
There are 7 textboxes which add dates to the spreadsheet. These dates are then used in formulas.
Every time a record is saved the date format changes.
Ths means that if the date is entered dd/mm/yyyy it writes mm/dd/yyyy and this is fine. When this record is next retrieved it will show mm/dd/yyyy and any new date will be dd/mm/yyyy.
Wen saved to the spreadsheet both formats change meaning the dates in the spreadsheet appear in diffrent formats messing up all formulas.
How can I stop the date format changing each time the record is saved?
So I have a date in cell A1 for example.
Now if cell B1 is either blank, or more than 6 days from the date in cell A1 I want it to turn red.
When I remove "Release date:" from "Release date:24 December 2008," excel will automatically change the text to "24-Dec-08." Yes, I did try to format the column to "text" before using find and replace.
This wouldn't be a problem, except that half the dates are in Dutch, so only half the dates are changed, which means that I can't make all date formats in a column uniform.
I have 2 macros, each called by the other to keep updates fast as per below,
Sub Macro1()
Cells.Replace What:=",29", Replacement:=",30", LookAt:=xlPart, _
SearchOrder:=xlByRows, MatchCase:=False
Application .OnTime Now() + TimeValue("00:00:01"), "Macro2"
End Sub
Sub Macro2()
Cells.Replace What:=",30", Replacement:=",29", LookAt:=xlPart, _
SearchOrder:=xlByRows, MatchCase:=False
Application.OnTime Now() + TimeValue("00:00:01"), "Macro1"
End Sub
I need to create a separate macro I can run to permanently stop these two cycling. And allow me to use Excel. Then, when I wish for these to cycle again, I simply run that macro.
I have a sheet where users enter a date and other details on each row.
The number of rows where data is entered can be upto 20 at any one time.
I wish to allow users to drag the cell date down for the number of rows they wish, without the date incrementing.
I have attached a copy of a spreadsheet that I am putting together, What I need to achieve is, when a date is entered into the completion date cell the daily count down in the days left cell stops but still shows the value in that cell. The Annual or Monthly cal tabs are the ones i need the formula for.
View 5 Replies View Relatedexcel.jpg
how to make my network days stop counting when I insert a value in the completed column (in this case H3). I have a Date Received column (A3), a due day column (G3) and the last column with the date (N3). My remaining days column keeps counting after I filled the completed cell (H3) and won't stop counting after. I need a formula to stop after the completed cell is fill up.
I have a column in excel which gets populated in the format "2/1/1980" when copied from a different source. I want a macro to run on this column and convert this in the below format. Required format: '02-01-80 (note the ' symbol before 02 which will keep it as text)
Existing ----> Required
2/1/1980 --> '02-01-80
2/1/1970 --> '02-01-70
2/1/1983 --> '02-01-83
I need this macro to run on two columns and replace them with the required format. I can do a find and replace either in the sheet or through hard coding the VBA, but as the date format keeps growing, I would need to do this via code and hence requesting the same.
I have been struggling with my Excel 07 Date format. Nearly every time I perform a calculation, enter in a value etc in a spreadsheet my answer is returned as a date. So for example if I enter in a cell: = 5 - 4. I get the answer "1-Jan-1900" instead of 1. I have to manually set the formats to general or number if I want the correct format. The setting seems to be the default one and occurs for all workbooks I open. What can I do to change this.
View 5 Replies View RelatedI am sure this may have been asked before ... but couldnt find it on a search
I have a number of userforms in an excel database, all with add, edit search capabilities.
Several of the textbox's have a time format, when I enter the time it is shown in hh:mm format, it is stored on the spreadsheet in the same format. but if I use the search function to recall a record and display it on the userform, to allow ammendments the time is always shown as a decimal. Can I set it to display the time as entered.
An example of some coding for a text box is shown below
Private Sub TxForTime_AfterUpdate()
TxForTime.Value = Format(TxForTime.Value, "hh:mm")
End Sub
I have a workbook with some code inside of it. When I turn off Autofilter after using the buttons in the top left of the sheet to filter by cell color all of the text fields on the entire sheet are moving to A1 on top of each other. I have no idea why this is happening nor is it throwing an error. I uploaded the sheet here [URL] .. for further review. I tried uploading on this site but the file is too large to upload.
View 4 Replies View RelatedI run a macro that imports a table from web page:
[url]
I import only the table with no formatting.
Excel tries to be helpful, and formats some of the cells in scientific notation.
I have tried to format the column to the "Text" format prior to the import with
Columns(2).NumberFormat = "@"
This does not work. If you import the table you can see that rows 1405, 1406, 1407, 1408 all have the same scientific notation value. Their true values should be 0E0, 0E4, 0E8, 0E9 respectively.
There are quite a few other instances in the column when a text value has "E" for the second character that Excel will format on its own.
Im importing figures into column G of my worksheet, and I need a code so it automatically adds a "0" to the start of each row in column G plus format it.
For example, im pasting in 970702090341 but its showing as 9.70702E+11.
Once I format the cell to 'number' and 0 decimal places it looks fine, but want to save the hassle of doing it each time. Plus I need a zero at the start.
Is there a code possible for this?
i want to type 1-1 in my excel sheet and it is automatically coverting to 1-Jan and then i checked for formatting to the way i want then i founf excel automatically selecting custom option in format then if i select general my 1-jan is converting to 41640 number. Now i want excel sheet should show what typed in it i .e. 1-1 only.
View 2 Replies View RelatedI have a sheet that highlight cells to show that they need to still be filled out if another cell in the same row has a number in it. What happens is that when you put the number in the row the cells won't become shaded or partially shade until the workbook is saved.. Maybe I can put some code in that tells the work book to update whenever a cell is changed?
View 3 Replies View RelatedDates:
------
November 1, 2008
1 novembre 2008
In the formula bar, these formated dates appear as 11/1/2008.
What I need to do is copy the formated dates and paste them into another column so that they show up as November 1, 2008 or 1 novembre 2008 and not as 11/1/2008.
Does anyone know of a non-macro formula or function that can do this? Is there a "paste as is" function?
I am facing a problem with number formats. I have downloaded some data from a database. In the data, there are some date columns in MM/DD/YYYY format. In a seperate workbook, I have copied that data as values.
Now when I am trying to change the formats of the dates to d-mmm-yy, they don't change. The formats are not not changing to any other format. I even tried changing the formats using VBA, but it did not work.
What I have done is create a macro in Excel and then opened up the VBA editor to make a lot of changes to the initial macro. I am reformatting a whole lot of separate spreadsheets over many workbooks.
Here is the code that is generating the error (Run-Time error '438', Object doesn't support this property or method):
Code:
Range("E2").Select
Selection.Format = "long date"
With Selection
.Font.Size = 11
' .Format = LongDate
.HorizontalAlignment = xlCenter
.VerticalAlignment = xlCenter
End With
As you can see, I first tried the ".Format = LongDate" and did put LongDate in "" which did not work, then I tried the "Selection.Format = ..." after the "Range" statement, and that did not work either. So you will actually know, I am trying to set the format for the cell "E2" to a Long Date format.
I have a problem when i try to format a cell. i download data from a website and it gives me the date and time in the first column, ex. 1/1/2009 5:00:00 pm. when i format the cell to date, the time is erased and the date remains which is what i want, ex. 1/1/2009. however, when i click on that cell or any other in that column, the display above, or "insert function" line still show the contents of the cell with the date and the time, ex. 1/1/2009 5:00:00 pm. is there any way i can change that so the time is erased and only the date remains, ex. 1/1/2009 when i click on the cell?
I am facing a problem with number formats. I have downloaded some data from a database. In the data, there are some date columns in MM/DD/YYYY format. In a seperate workbook, I have copied that data as values. Now when I am trying to change the formats of the dates to d-mmm-yy, they don't change. The formats are not not changing to any other format. I even tried changing the formats using VBA, but it did not work.
View 2 Replies View RelatedI am pulling reports out of a non-windows based program. This program spits out the data directly into an Excel spreadsheet, with but a click of a button. I imagine that the designers of this program assumed that this would be useful, but it's actually proving to be quite irritating.
The Date format they have chosen for their program is NOT the date format that Excel uses, but it resembles it enough to cause serious problems. The original program tracks dates in a "dd/mm/yy" format, rather then Excel's "mm/dd/yy". To my VAST personal irritation Excel does NOT convert this into Text (which could be
manipulated by snipping it into the correct format) but instead converts it into it's own Date format, leaving me with a useless and incorrect serial number as the only data.
I cannot interact with the exporting process at all, and as the program exports DIRECTLY into Excel I cannot manipulate the data prior to import (which would be one relatively easy way of avoiding this problem). I am left trying to figure out a way to reconstruct an actual date out of this mess. Is there any way to convert a date serial number BACK into text?
I'm trying to copy the value of one column to another, column A has date and time in this format: 6/1/2013 6:35:00 AM and I'm trying to get ONLY the dates to another column so that when I do my pivot, I can sort it out by date. I tried =A1 and I can format the column to how I want it but the value of the cell still remains in date&time. Is there any formula I can use? or should I change anything in my pivot table?
View 4 Replies View Relatedjust wondering if its possible to format a cell to display date and week number and if so how to go about it
eg
04/01/09 week 1
I have two cells. both formatted to contain dates.
cell a1 will have a date in it. cell a2 will have a date calculated to be cell a1 + 42 days.
now, when cell a2 reaches a date that is greater than cell a1 + 42 i want cell a2 to be formatted as fill red.
so, i have tried a conditional format as =a1+42 >=TODAY() but it always highlights as red even if the value in cell a2 is less than cell a1+42.
I have a cell that is constantly being changed from a date to a number. Excel automatically formats the cell as a date when a date is entered but if I re-enter a number it leaves the format as a date.
Is there anyway to automatically change the format back to general if a date is not entered.
I had this bit of code obviously it dosent work.
If Target.Cells.Count > 1 Then Exit Sub
If Not Intersect(Target, Range("E8:E46")) Is Nothing Then
If IsDate(Target.Value) Then
Target.NumberFormat = "d/mm/yy;@"
Else
Target.NumberFormat = "General"
End If
End If
Cancel = True
I'll get straight to the point:
where ( Date > 9/20/2007)
The above Date si used in a sql select statement where I'm hard coding the date (9/20/2007). This date is actually located in sheet1, cell E1. How can I get it from that cell and use it in my Select statement instead of entering the date manually every day in my code?
I have a table of data (total 142 rows). Column contains dates, in the format dd-mmm-yyyy.
I tried to filter using DATE FILTERS->EQUALS and in the custom filter window, I chose EQUALS then picked a date from the date picker icon. The date I picked was 5/4/2009 (this is May 4, 2009, formatted automaticall by excel as m/d/yyyy).
When I clicked OK, nothing showed up despite the fact that there are 6 occurences of May 4, 2009 (formatted as dd-mmm-yyyy in the data table)
So my questions are:
1. Is this due to the formatting?
2. Is there a way to change the date format supplied by the date picker?
I need a cell to restrict the input:
-Only numbers are allowed.
-No date posible.
-Any amount of decimals (they must all be shown in the cell).
I tried using the data validation and using the IsNumber() to restrict any non numeral input. The problem with this approach is that if the user enters a date; it apprears as a date format (eg: "5.May"). I'm using an european excel, where the decimal separator is a comma instead of a point; so if a user accidentaly types "5.5" instead of "5,5"; the cell will show "5.May".
I also tried the cell format/number/number format. The problem in here is that I dont know how many decimal positions will the input number have; and I need them all to be shown.