How to stop my 100% from changing to 1000% after it pastes?
Here's the pc of code that is performing the copy/paste from one sheet to another sheet within the same workbook..
Code:
With Sheets("BOM Worksheet").Range("C" & nr)
.Value = c.Offset(, -16).Value
.Font.FontStyle = "Bold"
.Font.Color = RGB(186, 85, 211)
End With
Right, sorry this is probably a simple one but I can't do it... I have information in a variable that is "1-4" the variable is defined as a String but whenever I use the following code excel turns it into a date.
View 2 Replies View RelatedA1 would be the cell that users would enter quantities of 500, 1000, 1500, 2000 etc and based upon what they entered-cell a2 would give a corresponding entry of 10,20, 30 etc.
View 4 Replies View Relatedmy excel sheet runs through a lot of calculations, opens Flowmaster, a simulations program, passes on data, receivs data and so on. Is there any way to have a user input to stop the whole simulation. During the first tries I had a lot of break point in my debugger. But now I want to have a button to hit or better just some keys to hit to stop it without using the ctrl+alt+del which closes everything.
View 4 Replies View Relatedhow can i do the following equation?
40$ if the sum is less than 1000$
75$ if the sum is less than 1001$ tO 3000$
100$ if the sum is greater than 3001$
C16 X C19 if sum is greater than 12000$
all should go in one cell
Based on the 1st example below, I have a file with 1000's of columns where every 3 columns has the same type of info....
View 9 Replies View RelatedI use a worksheet full of formulas to know what divisors a number have, but i need to see what numbers have no decimals in about 500-1000 cells. Is there a formula whitch computer can use to see if it shows a number or not (if a number have or dont have decimals)?
View 2 Replies View RelatedI have about 300 cells filled with different formula's like the ones written below.
=SUMPRODUCT(--('Book 1'!$B$1:$B$1000="H"),--('Book 1'!$C$1:$C$1000=D21),('Book 1'!$W$1:$W$1000))
=SUMPRODUCT(--('Book 1'!$B$1:$B$1000="H"),--('Book 1'!$D$1:$D$1000=I21),('Book 1'!$S$1:$S$1000))
Spreadsheet works great, but I've realized that I should have expanded beyond the 1st 1000 cells (example: $1000). One book 1, my data entry will extend beyond row 1000.
Is there a way I can replace all $1000's on the spreadsheet with say $3000 without having to correct each of the 300 cells separately?
i have a figure of 1000 in cell a1. i want to divide it by a figure in cell b1 and have an answer in c1, or divide it by a figure in c1 and have an answer in b1.
in summary, cell a1 has i figure in it while cells b1 and c1 are empty until i enter a number into one or the other.
I am having a problem with vlookup. I have the formula working but would like to divide it by 1000 then multipy by 24. When I enter /1000*24 after the colon in the vlookup formula my answer is 0(zero). If I don't try to divide and multiply the answer is correct.
View 9 Replies View RelatedI made a thread similar to this earlier but was unable to get to a desired end result.
I am trying to make a formula that will count the number of cells that do NOT have a fill color AND have a value over 1000 AND are greater than 60 days old as of the last day of the previous month.
Attached is a file with sample data so you can better understand
I included 2 formulas in the file that I am already using. Just in case that information is needed/relevant.
about making my code a bit more useful.
I started with a basic code as below which basically looks at upto 1000 part ids in column A and goes to my database to find corresponding Product Codes from a table in the database call PART
How would I modify the below code to extract all of this data from multiple files? I have about a 1000 files that I need to extract all of the data from to manipulate in Excel.
Code:
Sub ImportWordTable()
Dim wdDoc As Object
Dim wdFileName As Variant
Dim TableNo As Integer 'table number in WordDim iRow As Long '
[Code] ...........
im trying to create a simple random sample from my data set of size n=100 and then i need to repeat that step a 1000 times to make a new data set that i can transfer over to stata. Everything I have seen on the internet involves generating random numbers which isnt what i want. I need to be able to generate a random sample.
Currently my excel spreadsheet consists of 4 columns with 200 entries in each column.
Am working with a spreadsheet of about 1000 rows and 50 columns which I need to transform into 2 columns and as many rows as needed. I have attached a simplified example of a 3x3 spreadsheet so you can see what I mean. I have already managed to get my result using Filtering and some copy and paste but I am struggling to now fully automate the solution.
View 4 Replies View RelatedI've been trying to put together a VBA code that allows me to find a number between 1000 - 10,000. I am able to find any number below 999 but can seem to find anything above 1000. I've been using the following ....
View 13 Replies View RelatedI have a rand () which provides me a different number upon calculate. I would like to run a loop for 1000 times and take the value and copy and paste in a range.
The below sorta works, but at times it stops or doesn't work at all. I have a loop for the counter and the for each to place the value into the cell and have it run over and over and placing the value in the next cell underneath. I have the counter at 10 so I dont get stuck in some endless loop before I know it works.
Code:
Sub montecarlos()
Dim MCs As Long
Dim c As Range
Dim lCount As Long
Dim lNum As Long
lCount = 0
lNum = 1
Worksheets("MonteCarlo").Activate
[code].....
HOw do we hard code excel to show when number typed as with the 1000 separator.
For Eg: 1,000
How can i format a column of cells so that if a number is less than 10 for eg that that particular cell is then multiplied by 1000.
View 9 Replies View RelatedI'm trying to accomplish is to take an Excel file that contains one column of data consisting of up the maximum number of rows of data (numbers formatted as text? "000000000") and export the data to a text (.txt) file 1000 rows at a time. I would also like the code to allow me to name the .txt files in succession, for example, Pg01, Pg02, Pg03, etc.
The files are going to be used to query a system that will only accept text input 1000 items at a time.
I run the following code to ensure the data is formatted consistently:
Sub a_VerifyDataForInput()
' Start at Cell A1
Range("A1").Select
' Select Column A
Columns("A:A").Select
' Format data in Column A
Selection.NumberFormat = "000000000"
' Replace all "|" (whatever you call this thing ... pipe???)
Selection.Replace What:="|", Replacement:="", LookAt:=xlPart, _
SearchOrder:=xlByRows, MatchCase:=False, SearchFormat:=False, _
ReplaceFormat:=False
' Replace all "-" (dashes)
Selection.Replace What:="-", Replacement:="", LookAt:=xlPart, _ ........................
I have this annoying problem with my excel 2003. And i have no clue at all how to solve this.
Each time i write 2.5 it turns into 02.may. Does any one know how i can fix this?
Is there any way witch i can use to make the auto-filter range bigger than 1000 cells?
View 2 Replies View RelatedNeed macro to search approx 1000+ xls files in folder/directory for common text string "see reference" and then output the file number which is located in cell A1 to new spreadsheet for each file the text "see reference" is found.
View 2 Replies View RelatedI need a formula that returns the Nth number from a single column that contains a small number of values within a span of 1000 cells. E.g., within 1000 cells there are 36 with numbers and the remaining cells are blank. I need to obtain the first occurrence of a number in the column, then the second, third... to the thirty-sixth. The end result would be a column with 36 numbers with no blanks in between without loosing the correct order of the numbers.
I have excel 2003 and have been tooling around with the index and lookup functions with no success.
I fill out this form everyday and sometimes need to type "S" and every time it fills in "Sampling Rate #1" because that's what it says in the same column higher up. Is it possible to turn this off somehow?
View 3 Replies View RelatedI want to turn on (tick) a check box from within a macro.
I have a sales and prospects spreadsheet. It has information in columns A to O. The last 3 columns M, N and O, require a 'Y' for Yes or 'N' for No entry. If entering N, the background colour of the cell turns grey using conditional formatting, and if entering Y the background colour of the cell turns Gold using conditional formatting. Column O is headed 'Sold', so that column is onviously the final Y. Upon entering Y in column O, ie the sale is made, I's like it that the whole row, so all cells of that row in columns A to and including O turn gold to easily visually differentiate done deals from prospects.
Also what would be cool is if when a deal is done, it not only turns the whole row gold, but moves the row to the top of the sheet, so by dividing done deals from prospects, that is utopia at this stage though, more important is turning the row gold upon a Y entry in column O.
I had sent 1000 emails to the my customers by using mail merge in word document. Now I need to reply to these 1000 customer again individual one by one. The message is the same, but I need these thing to be sent in individual.
View 1 Replies View RelatedI have 1000 workbooks in a folder, each workbooks format is same.
as of now I open each workbook, and check if values in A10 is equal to B10, that is if the value in A10 is "100" I will check if B10 is also "100" if not I will make a note the file name.
I have more than 1000 workbooks in a folder, It is really difficult to open and check if the values are same. is there a macro, which will check the condition A10 = B10, if not get the file name in one sheet.
I recently installed Office 2002 onto a new computer and found that whenever I drag-and-drop any amount of data from one cell to another, a loud obnoxious noise plays when I release the drag-and-drop data.
I was using the same version of Office on my old computer and did not have this problem.
I'm guessing it's a clipboard issue, since when I open the Excel clipboard (where I currently have all options as unchecked) and copy something so it is captured there, the same noise plays.
I already have turned off Windows sounds via the Control Panel and have no clue how to turn off this sound.
