Set Textbox Controls

Jan 24, 2007

way of setting the values of textbox controls, the way im using below is very repetitive and has to be run through every time a combobox1 is changed. Im also going to have to add a lot more case scenarios in the short future.

Private Function setform()
Dim Xeng As Boolean

For Each ctl In Me.Controls
If TypeOf ctl Is MSForms.TextBox Then
ctl.Enabled = True
ctl.Locked = False
ctl.Value = ""
End If
Next

View 6 Replies


ADVERTISEMENT

Treeview With Textbox Controls

Oct 26, 2006

i am trying to adapt this code to show userform textbox's instead of cell information

Sub treeview()
Dim i As Integer
Dim nodX As Node
Dim strRel As String
Dim strRship As String
Dim strKey As String
Dim strText As String
Worksheets("sheet1").Activate
Range("a3").Select
For i = 1 To 3
'cell A3
strRel = ActiveCell
'cell B3..................

which i found here, fileTreeview control.

View 7 Replies View Related

Format TextBox Controls The Same

Nov 6, 2006

textbox1 on a userform populates textbox2 on a different userform via a command button.

how can i make sure textbox2 keeps the format from textbox1?

eg: when i enter 0.010 in textbox1 and click a command button to populate textbox2 on the 2nd form it produces a value of .01 instead of 0.010

View 3 Replies View Related

Calculate 2 UserForm TextBox Controls

Jun 3, 2009

I am trying to calculate the result of two text boxes in a third textbox on a userform.

Box1 = DirectorHrs = a textbox that the user enters the number of hours
Box2= DirectorRate = a textbox that retrieves the rate from a sheet called "Rates" within the workbook upon initialise of userform.
Box3 = DirectorTotal = Box1*Box2. I want this to update when the user enters or changes Box1.

I have the following code on the change event of Box1

Private Sub DirectorHrs_Change()
DirectorTotal.Value = CStr(Val(DirectorRate.Value) * Val(DirectorHrs.Value))
End Sub

View 4 Replies View Related

Indentify TextBox Controls In Loop

Oct 16, 2006

On a multipage user form, a combobox control allows the user to select a value from a list, which automatically populates textboxes with other fields from the same list. This works perfectly. I tried to set up another combobox that would work in the same manner, but referencing an entirely separate worksheet and returning the appropriate values from that list to its related textboxes. My problem is that both comboxes are automatically populating ALL the textboxes, ie combobox1 returns the correct information in its related textboxes, but also changes the information in the textboxes related to combobox2. Combobox2 does the same in reverse. I can at least see and understand why this is happening - the combobox code for both is telling ALL textboxes with numerical tags to update.

Private Sub cmbPAYERefFirst3Digits_Change()
Dim rFoundSource As Range

Dim strText As String
Dim tBox As Control

If cmbPAYERefFirst3Digits.ListIndex > -1 Then


strText = cmbPAYERefFirst3Digits.Text
Set rFoundSource = Range(cmbPAYERefFirst3Digits.RowSource). Find(What:=strText, _
After:=Range(cmbPAYERefFirst3Digits.RowSource).Cells(1, 1), _
LookIn:=xlValues, LookAt:=xlWhole, SearchOrder:=xlByRows, _
SearchDirection:=xlNext, MatchCase:=True)


For Each tBox In Me.Controls ...........................

View 3 Replies View Related

Reset UserForm Textbox Controls

Mar 5, 2008

I have the following code that is not working properly. When the form loads it always shows data from the previous time the form loaded. I searched and found the following code which doesn't seem to be working correctly. I thought by unloading the userform the values of the textboxes would "reset". Not happening.

Private Sub CommandButton1_Click()

Dim cRow
cRow = ActiveCell.Row ' remember the current row

Cells(cRow, Range("Column_Type_Of_Ride").Column).ClearContents

Unload Erase_Ride_Form
Erase_Ride_Form.Hide

End Sub

View 9 Replies View Related

Sum Of Multiple UserForm TextBox Controls

Mar 24, 2008

I created a userform. Now, I want to make a sum of the textboxes in my userform and pop up a warning signal is the sum isn't 18. I tried it in different manners, but I always get some problems. I entered default values of 0 in my textboxes. When I edit the values by using the userform, the popup message will appear even though the sum of my textboxes is 18. Here is the code for the pop up warning message.

If (Me.txt1.Value + Me.txt2.Value + Me.txt3.Value + Me.txt4.Value + Me.txt5.Value + Me.txt6.Value + Me.txt7.Value _
+ Me.txt8.Value + Me.txt9.Value) <> 18 Then
MsgBox "Vous avez fait une erreur. Le total ne donne pas 18 trous."
Me.txt1.SetFocus
Exit Sub
End If

View 4 Replies View Related

Populate Cells With Contents Of TextBox Controls

Sep 12, 2006

I am trying to populate the first 12 columns in the last row of the active sheet from 12 UserForm TextBoxes (TB5 thru TB16). Here is the

With Range("A65536").End(xlUp)
For i = 1 To 12
.Offset(0, i - 1).Value = Me.Controls("TB" & i + 4).Value
MsgBox "Cycle " & i
Next i
End With

The MsgBox returns a "Cycle 13" only once. The Row has the first column filled but none of the rest. I am trying to load TB5 thru TB16 into columns A thru L of the last row (the last row was copied down to get the formatting and this code was supposed to over write the copied data and leave the formatting). But only TB5 loads into Column A!

View 6 Replies View Related

Highlight Mandatory Empty TextBox Controls

Jun 6, 2008

I have the below code that I am using to find an empty textbox with the name FirstName. All it does is place the cursor in the FirstName text box if the textbox is empty, but doesn't really make it stand out. I was hoping to find a way to color the background of the textbox pink, or have it set up so it would stand out somehow.

View 4 Replies View Related

Show Current Row Columns UserForm TextBox Controls

Oct 1, 2006

I have a spreadsheet that has a userform attached to it with text fields that enter additional data regarding each record. The userform takes these additional 5 fields and inserts them back into the spreadsheet, the final information to be exported back into Access. ( There are of course other ways to do this, but this is how my supervisor wants it done!)

My problem is that now that I can scroll through the spreadsheet without closing the userform, the userform doesnt show the current row's information as I scroll or change rows on the spreadsheet. It will only show the information that was in the row that it was on before i switched back to spreadsheet.

View 9 Replies View Related

List Random Numbers Being Passed To TextBox Controls

Sep 3, 2007

how to display the result i made in macro to active worksheet so that i can keep a record of the result made in my random generator,

Sub timer()
TextBox1 = ""
TextBox2 = ""
TextBox3 = ""
TextBox4 = ""
Dim x As String, i As Byte
Randomize
x = Format$(Int(Rnd * 1899) + 1, "0000")
For i = 1 To Len(x)
Me.Controls("TextBox" & i).Value = Mid$(x, i, 1)
Application.Wait Now + TimeValue("00:00:03")
Next

End Sub

Private Sub CommandButton1_Click()
timer
End Sub

Private Sub TextBox1_Change()

End Sub

View 3 Replies View Related

Color Cell Fonts Based On Text Color Of TextBox Controls On UserForm

Apr 11, 2008

I have got a userform with lots of controls,

One of the action's on a large group of the controls is the same but except for one number

here is an example

If TextBox107.ForeColor = 255 Then ActiveCell. Offset(0, 53).Font.ColorIndex = 3
If TextBox108.ForeColor = 255 Then ActiveCell.Offset(0, 54).Font.ColorIndex = 3
If TextBox109.ForeColor = 255 Then ActiveCell.Offset(0, 55).Font.ColorIndex = 3

This makes a cell that correlates to the textbox red if the text in the textbox is red.

Now, I loads of these textboxes that all need to run the same code with just the Offset value one digit higher than the last and I was hoping I could create a loop to avoid a huge block of code but I can't work out how to make a constant that will +1 with each loop.

Also, can I assume that a loop will start with the control with the lowest number i.e. Textbox1 and then work its way through the rest of them in order?

View 3 Replies View Related

Formatting TextBox And Check Which TextBox Is The Active TextBox In The Loop

May 18, 2006

I am attempting to format some TextBoxes from within a For/Next loop. I need a way to check which TextBox is the active TextBox in the loop. Using i as the variable, I came up with this code snippet: Me.Controls("TB" & i).Text = Format("TB" & i, "mm/dd/yy")

If i = 3, this gives me in TextBox3 (which is called TB3) the text 'TB3' and not the value of what is in TB3. It has got to bo something simple, I just can't see it!!!

View 2 Replies View Related

Excel 2003 :: Copying Information From Textbox To A Cell (or Another Textbox)

Dec 28, 2013

Is there a way without using code to have the text in a text box (excel 2003), copied to another cell or another text box on a different worksheet?

I have information in a text box on 1 worksheet. I would like this information to automatically be copied to another worksheet. On the master sheet, if any of the information gets changed or updated, the copied information should get updated as well.

View 1 Replies View Related

Conditional Formatting Userform Textbox Based On Textbox Value?

Jul 3, 2014

I've been using the following code to conditionally format userform textboxes based on a specific value (in this case 2490):

[Code] ........

What I'm looking to do now is amend this so rather than use a specific value, to use the value in a specific textbox on the same userform.

View 3 Replies View Related

Userform Textbox Event That Fires After I Exit The Textbox

Feb 2, 2010

I need a userform textbox event that fires after I tab or click out of the textbox. Going by the list of options:Beforedragover, BeforeDroporPaste, Change, DblClick, DropButtonClick, Error, Keydown, Keypress, keyup, mousedown, mousemove, mouseup.

I can't figure out which one will do what I want. The change event happens instantaneously which doesn't work. I need to fire off the event when my focus leaves the textbox.

View 11 Replies View Related

Copy One Value Of Textbox ActiveX On Worksheet To Userform Textbox

Jul 25, 2014

I need the value of active x control textbox on my worksheet 1, to be copied to a textbox in my userform, that pops up from that sheet....

And I want it to display after the textbox on my worksheet has been updated and the comman button for the userform is clicked...

View 1 Replies View Related

Copy Textbox Text When Cursor Moved From Textbox

Feb 7, 2007

In Excel VBA Userform, how to copy the text from textbox automatically when the cursor is being moved from the textbox. And when i put CTRL+V then the copyed text has to be pasted.

View 5 Replies View Related

Adding Text From One Userform Textbox To Another Textbox

Oct 12, 2011

Code:
Private Sub cmdSearchButton_Click()
Dim txtbox As String 'stores lookup value
Dim x As Variant 'value for wwid txt box
Dim ForeName As String
Dim SurName As String
Dim wwid As Variant
Dim iPosition As Integer

[Code] .......

Here is my code, it does a vlookup and if the persons name is not found it will split the text entered into forename and surname but when i try and add

Code:
frmAdd.txtForename.Text = "&ForeName &"
frmAdd.txtSurname.Text = "&SureName &"

It actually displays &ForeName & in the text box of the next from rather than what ForeName is..

eg. John Smith -> search button -> user not found msg -> user wants to add user -> string is split into forename and surname -> forename = John , surname = Smith -> display this in the second form.

What code should i be using to do this, i thought that &ForeName & would work.

View 1 Replies View Related

Insert Textbox With Textbox Containing Formula Rather Than Text

Mar 28, 2013

Looking for a macro to insert a textbox with the textbox containing a formula rather then text.

Sub AddTextBox()
ActiveSheet.Shapes.AddTextBox(msoTextOrientationHorizontal, 2.5, 1.5, _
116, 145).Name = "Textbox1"
ActiveSheet.Shapes(1).Select
Selection.Formula = "=Manpower!R[3]C[1]"
End Sub

I tried this but I cant get the formula portion to work... I just want to insert a macro with that formula....

View 2 Replies View Related

Adding Comments To Textbox And Having Textbox Keep Updating

Apr 3, 2014

I have a form that has three fields (1. Comments (TEXT), 2. Legacy_Comments (TEXT), 3, Comment date (DATE))

Now my users need to keep adding comments to the comment text box, and when they do it automatically adds the date they entered the comment in the Comment date box. Now my problem is that since they keep adding comments to the comment box, I need to keep track of these comments in the Legacy_Comments (Text box).

For example, the First time a user enters a comment into the (1) comment text box it auto populates the date in the comment date box, and then adds the comment and date to the Legacy_Comment box. the end result is (comment,4/3/2014 now lets say a user needs to add a comment to the comments box tomorrow - I want the legacy_Comment box to then read (comment, 4/3/2014; comment2, 4/4/2014, ...., comment(n),date(n)) OR it can be vice-verse, because I just need to keep track of the comments, I am not worried if the new comments are before or after older (yesterdays / the day before yesterdays comments)

How can I write a VBA code that will always add the new comment to the legacy_comment field, without deleting the comments that were entered previously?

Code:
If isnull(me.comment.value) Then
Exit Sub
ElseIf me.comment.value = true Then
me.comment_date.value = date
me.legacy_comment.value = me.comment.value & "," & me.comment_date.value & ";"
me.legacy_comment.value = me.legacy_comment.value & "," & me.comment_date.value & ";"

It adds the comment only the first time, but it does not concatenate the string from yesterday to the string to today. I do not care which order the comments are, meaning if I added a comment today it can be before OR after the comment from yesterday.

View 1 Replies View Related

Copy Value Of Textbox On Worksheet To Textbox On Userform

Jul 27, 2014

I tried looking for everywhere, but i still cant seem to find the solution.. I have an Active X textbox on a worksheet, and I need it's value to show up on a textbox on my userform, that shows up through a command button on that worksheet. I'm fairly new to vba.

View 1 Replies View Related

Transferring Value From Textbox On Multipage 1 To Textbox On Multipage2

Jul 16, 2008

I have a two-page multipage form. I have a textbox on page 1 (txtOccupantLoad), and I want to pass the value from that textbox to another textbox (txtOccLoad_L1) on page 2. The code I've tried so far looks like this:

Private Sub cmbChooseLevel_Change()
If Me.cmbChooseLevel.Value = "Level 1" Then
Me.txtOccLoad_L1.Value = Me.txtOccupantLoad.Value
End If
End Sub

What I'm trying to do is to use the same form for 10 different levels (floors) of a building. Then on page 2, I'll itemize the values for each floor. So the combobox determines which floor the calculations are for; txtOccupantLoad is the total of all incremental occupant loads on that floor; and txtOccLoad_L1 is the first of a series of textboxes on page 2 where the value for Level 1 should go. If the combo box shows "Level 2" then I'll write new code for the txtOccLoad_L2, and so on. I've also tried including "page1." and "page2." after "me."

View 9 Replies View Related

Pass Vlookup Result Of TextBox To Another TextBox

Feb 13, 2008

I am trying to create a user form that has a series of text boxes that will all have a VLOOKUP function in them based off of input from a the first text box. If I can just get the code for the first one, I think I can figure out the rest. We will say that the file that the user form is contained in is 'Agent Administration' and the file that I want the VLOOKUP to pull from is called ' Roster for Auto Population'.

View 7 Replies View Related

Textbox - Using Text Entered Into Textbox As Tab Name

Oct 4, 2012

I have attached my file.

When the Go button in text box in the 'VSVA-1 Data' tab is pressed, a new tab is created. I would like the tab to be renamed after the text that is entered into the text box. Is this possible? Here is what I have so far.

VB:
Sub RenameTab()
'Renames the worksheet tab
ActiveWorkbook.Sheets("VSVA-1 Data").Select
tabName = TextBox1
ActiveWorkbook.Sheets("VSVA Data").Select
Selection.Name = tabName
End Sub

View 1 Replies View Related

Copy From Textbox To TextBox In Another Userform

May 23, 2008

I am trying to copy data from a Textbox in a Userform to a Textbox in another Userform. Is it possible?

In Userform1 I have a button from which I can open Userform2 keeping the Userform1 opened. When closing Userform2 I want to copy the data from TextBox2 in Userform2 to TextBox1 in Userform1.

I was trying to guess the code... but it is not working...:

UserForms("Userform1").TextBox1.Value = UserForms("Userform2").TextBox2.Value

View 3 Replies View Related

Tab Between Controls

Jan 4, 2007

I created a form using multiple text boxes and combo-boxes using Excel VBA controls but do not know how to enable the ability to tab between those boxes. "Auto Tab" doesn't seem to do it.

View 9 Replies View Related

Extra Controls

Mar 26, 2009

i've been scrolling through the Uerforms extra controls and just wondered if there is a comperhinsive list of them and what they actually do?

View 2 Replies View Related

Subtotal Controls

Dec 13, 2007

I have added subtotals to a worksheet, as I have many times before, but this time I don't see any controls off to the left. I am at a loss as to why this might be happening or how to get them to display. Have I toggled something off or on that might be causing this?

View 4 Replies View Related

Controls(num) What Parenthesis Mean

Jan 6, 2007

In line me.controls(0) what (0) stands for?

I thought it's for tabindex but after experiment it's not.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved