Show Current Row Columns UserForm TextBox Controls
Oct 1, 2006
I have a spreadsheet that has a userform attached to it with text fields that enter additional data regarding each record. The userform takes these additional 5 fields and inserts them back into the spreadsheet, the final information to be exported back into Access. ( There are of course other ways to do this, but this is how my supervisor wants it done!)
My problem is that now that I can scroll through the spreadsheet without closing the userform, the userform doesnt show the current row's information as I scroll or change rows on the spreadsheet. It will only show the information that was in the row that it was on before i switched back to spreadsheet.
I am trying to calculate the result of two text boxes in a third textbox on a userform.
Box1 = DirectorHrs = a textbox that the user enters the number of hours Box2= DirectorRate = a textbox that retrieves the rate from a sheet called "Rates" within the workbook upon initialise of userform. Box3 = DirectorTotal = Box1*Box2. I want this to update when the user enters or changes Box1.
I have the following code on the change event of Box1
Private Sub DirectorHrs_Change() DirectorTotal.Value = CStr(Val(DirectorRate.Value) * Val(DirectorHrs.Value)) End Sub
I have the following code that is not working properly. When the form loads it always shows data from the previous time the form loaded. I searched and found the following code which doesn't seem to be working correctly. I thought by unloading the userform the values of the textboxes would "reset". Not happening.
Private Sub CommandButton1_Click()
Dim cRow cRow = ActiveCell.Row ' remember the current row
I created a userform. Now, I want to make a sum of the textboxes in my userform and pop up a warning signal is the sum isn't 18. I tried it in different manners, but I always get some problems. I entered default values of 0 in my textboxes. When I edit the values by using the userform, the popup message will appear even though the sum of my textboxes is 18. Here is the code for the pop up warning message.
If (Me.txt1.Value + Me.txt2.Value + Me.txt3.Value + Me.txt4.Value + Me.txt5.Value + Me.txt6.Value + Me.txt7.Value _ + Me.txt8.Value + Me.txt9.Value) <> 18 Then MsgBox "Vous avez fait une erreur. Le total ne donne pas 18 trous." Me.txt1.SetFocus Exit Sub End If
I need some code that will do the following in a UserForm:
If option1 is selected = textbox1 is visible, textbox2/combo1 is hidden If option2 is selected = textbox2 is visible, textbox1/combo1 is hidden If option3 is selected = combobox1 is visible, textbox1/textbox2 is hidden
After seaching on this and other forums I have not been able to get an answer to this question. Also I know there are a lot of posts out there that sound like this, but none are the same.
My spreadsheet has multiple userforms, which has multiple textboxes. The textboxes are for dates. I have it set so when you double click in the textbox that it calls a calendar function.
Here is the problem.... After you click ok on the calendar form I want the date to go into the textbox that the calendar form was called from. The only way for me to get this to work is to create a seperate calendar form for each textbox that I call the calendar form from.
I am looking for a text box code that works with a search userform.
Basically, I search using my userform find function and if there are more than one record found I want to be able to either:
1) have the records found appear in a listbox 0r 2) have the first record appear in the userform but a text box will show I am on 1 of X records and when I click a command button, go the next record, which will be 2 of x records and so on...
VB:
Private Sub cmbNext_Click() Dim FirstCl As Range 'first data Entry Set FirstCl = Range("a2").End(xlDown).Offset(1, 0)
[Code] ....
This is the code for the button that goes to the next record but I am unsure how to relate that a listbox or text box that shows the record number I am on out of the total that there are.
I would also be looking for another button that goes back one record. So i am hoping it's as easy as reversing the code for the next record function.
I am not sure if the listbox that could show all I records and one can just be selected is easier than showing the textbox with the " 1 of X records".
I have a Userform that allows users to add projects to a tracking sheet. If the project is a WIP, no 'Sign Off Date' needs to be entered. When the project is complete, I would like the user to be able to hit a shortcut key (while inside the user form, with the cursor in the 'Sign Off Date' textbox) to populate the 'Sign Off Date' textbox with today's date (i.e. like CTRL + ; does in Excel) rather than have to enter it manually.
how to show a value in textbox form. So i have some columns in an excel file , but i want to show the last cell value of the column Amount in the textbox.
One of the action's on a large group of the controls is the same but except for one number
here is an example
If TextBox107.ForeColor = 255 Then ActiveCell. Offset(0, 53).Font.ColorIndex = 3 If TextBox108.ForeColor = 255 Then ActiveCell.Offset(0, 54).Font.ColorIndex = 3 If TextBox109.ForeColor = 255 Then ActiveCell.Offset(0, 55).Font.ColorIndex = 3
This makes a cell that correlates to the textbox red if the text in the textbox is red.
Now, I loads of these textboxes that all need to run the same code with just the Offset value one digit higher than the last and I was hoping I could create a loop to avoid a huge block of code but I can't work out how to make a constant that will +1 with each loop.
Also, can I assume that a loop will start with the control with the lowest number i.e. Textbox1 and then work its way through the rest of them in order?
I have two TextBoxes (txtSpan & txtTrib) in a UserForm (frmSizes), when values are entered in these TextBoxes they show (as they are typed) in cells of the spreadsheet. The resulting calculation is in cell B11.
How do I get the value in cell B11 to show in a third TextBox (txtAns) as soon as it is calculated without closing the UserForm or running another code?
I am trying to show the number of years in the userform textbox based from today's date and into the date the eqpt was installed. I stuck with the below code.
Code: Private Sub DTPicker1_Exit(ByVal Cancel As MSForms.ReturnBoolean) If TextBox1.Text "" Then TextBox2.Text = Year(DTPicker1.Value) - Year(TextBox1.Text) End If End Sub
Where in textbox1 I have this code that activates on userform initialize
Code: If Me.TextBox1.Value = "" Then Me.TextBox1.Value = Format(Date, "dd.mm.yyyy") End If End Sub
Textbox2 is where I want the number of years to appear .
I'm having some trouble setting up my Userform. It's used for someone to insert a password to open up some sheets. I have it working except for 2 problems.
First off it gets started by a sub which has a shortcut key, CTRL + W.
When it opens I would like the TextBox to be ready to be typed on... and I would like the submit button ready for Enter. So when it opens, you just type in the password really quick and press enter without using the mouse at all.
The TextBox starts on the first try, but when I press cancel and then open the UserForm up again, then the cancel command is still selected and I have to select on the textbox.
There is 3 things on this userform... TextBox1, CommandButton1, CommandButton2. All I want is for the TextBox always to show up ready for typing, and the Submit(CommandButton1) to always be ready to press enter.
Users select a row number which then opens up a Userform. Comboboxes and Textboxes on this Userform are then populated with coloumn values (dependant on the row initially selected). If the row number was the same each time I could accomplish this by the following.
Private Sub TextBox1_Enter() TextBox1.Value = Range("a1") End Sub
but as its a variable I'm trying the following (which I think should work)
Private Sub TextBox1_Enter() TextBox1.Value = Range("a" & edi & "") End Sub
I think I need to declare the variable 'edi' as Public. If so where should this be? I've tried 'Genereal Declaration'
I have userform with date pickers and have text boxes overlaid on these, when I select todays date from the date picker it does not display the current date in the text box (I have 8 date pickers on the userform). If I select another date then reselect the current date it works. It has occasionally worked but why.
Below is the code for populating the text box from the Date Picker.
Private Sub DTPicker1_Change() TextBox1.Value = DTPicker1.Value End Sub
The initialize userform code uses the following to format and set the textbox
way of setting the values of textbox controls, the way im using below is very repetitive and has to be run through every time a combobox1 is changed. Im also going to have to add a lot more case scenarios in the short future.
Private Function setform() Dim Xeng As Boolean
For Each ctl In Me.Controls If TypeOf ctl Is MSForms.TextBox Then ctl.Enabled = True ctl.Locked = False ctl.Value = "" End If Next
i am trying to adapt this code to show userform textbox's instead of cell information
Sub treeview() Dim i As Integer Dim nodX As Node Dim strRel As String Dim strRship As String Dim strKey As String Dim strText As String Worksheets("sheet1").Activate Range("a3").Select For i = 1 To 3 'cell A3 strRel = ActiveCell 'cell B3..................
On a multipage user form, a combobox control allows the user to select a value from a list, which automatically populates textboxes with other fields from the same list. This works perfectly. I tried to set up another combobox that would work in the same manner, but referencing an entirely separate worksheet and returning the appropriate values from that list to its related textboxes. My problem is that both comboxes are automatically populating ALL the textboxes, ie combobox1 returns the correct information in its related textboxes, but also changes the information in the textboxes related to combobox2. Combobox2 does the same in reverse. I can at least see and understand why this is happening - the combobox code for both is telling ALL textboxes with numerical tags to update.
Private Sub cmbPAYERefFirst3Digits_Change() Dim rFoundSource As Range
I am trying to populate the first 12 columns in the last row of the active sheet from 12 UserForm TextBoxes (TB5 thru TB16). Here is the
With Range("A65536").End(xlUp) For i = 1 To 12 .Offset(0, i - 1).Value = Me.Controls("TB" & i + 4).Value MsgBox "Cycle " & i Next i End With
The MsgBox returns a "Cycle 13" only once. The Row has the first column filled but none of the rest. I am trying to load TB5 thru TB16 into columns A thru L of the last row (the last row was copied down to get the formatting and this code was supposed to over write the copied data and leave the formatting). But only TB5 loads into Column A!
I have the below code that I am using to find an empty textbox with the name FirstName. All it does is place the cursor in the FirstName text box if the textbox is empty, but doesn't really make it stand out. I was hoping to find a way to color the background of the textbox pink, or have it set up so it would stand out somehow.
how to display the result i made in macro to active worksheet so that i can keep a record of the result made in my random generator,
Sub timer() TextBox1 = "" TextBox2 = "" TextBox3 = "" TextBox4 = "" Dim x As String, i As Byte Randomize x = Format$(Int(Rnd * 1899) + 1, "0000") For i = 1 To Len(x) Me.Controls("TextBox" & i).Value = Mid$(x, i, 1) Application.Wait Now + TimeValue("00:00:03") Next
Having a problem with a survey I'm creating in Excel.
I have a question with a Yes/No response cell. I want to show/hide several rows below it. The problem is that these rows also contain 6 option buttons, which I also need to hide/show depending on the response cell.
Is there a handy way to hide all of these shapes/controls in the defined range, and then "unhide" them if the cell value changes back to "Yes"?
I need a userform textbox event that fires after I tab or click out of the textbox. Going by the list of options:Beforedragover, BeforeDroporPaste, Change, DblClick, DropButtonClick, Error, Keydown, Keypress, keyup, mousedown, mousemove, mouseup.
I can't figure out which one will do what I want. The change event happens instantaneously which doesn't work. I need to fire off the event when my focus leaves the textbox.
I have a userform that has nested multipages (5 in the outer page, 4 in the inner page).
On each of these multipages, I want to have the same controls (sliders) laid out in the same order - but with unique names, named after their tab location, for each control so I can use their value property later in the code.
I've designed the layout and named all the controls on my first sheet (e.g. Slider1Outer1Inner1). I now need a way of automating the replication of these across the other 19 sheets (including the nested inner multipage!); so that equivalent slider for example would be called Slider1Outer1Inner2, Slider1Outer1Inner3 etc.
I'm not sure about coding VBA to act on items within VBA...
VB: " For each multipage in outer For Each multipage In inner For Each Object In current multipage Copy inner.object -> Next multipage Inner.object.name = CurrentOuter & CurrentInner & CurrentSlider "
What's the best way to hide controls on a userform? I have a userfrom with 2 datepicker one for start date and one for end date. I want them hidden until I use checkbox and check it to appear. I am using this code but nothing is work.
