Show Numbers In Column A If Value Found
Feb 26, 2008What formula can I use to return the value in column A if the value is found.
Something like:
=LOOKUP($M$1,$B$18:$O$31,give the value in Column A of the row of where the result is)
ADVERTISEMENT
Concatenate Varying Numbers Of Cells Based On Duplicates Found In Separate Column
Jul 25, 2011 I need to concatenate varying numbers of cells based on duplicates found in a separate column, but I'm not sure how to approach it. I have 41,000+ rows of data, so I have to find a formula.
Example:
1AB2Denton, PaulFB357D4D3OwensTest, MarcyFB539F934Brennan,
JosephFB539F935Bowser, AmyFB539F936LaRock, ChuckFB667D3B
Based on duplicates in column B, I want to combine the data in column A into one cell. The duplicates in column B could be only 2, or could be 20+.
Show Sum Of Numbers In One Column IF Another Column Has A Specific Category
Apr 28, 2009I have a worksheet which basically tracks time. the time is reported in Column C. In that row in Column E, there is a validation list with about 6 different categories in it. On the side of this "table" I have a list of all the categories and I want a value to be next to it that reports the sum of time (C) for each category (E).
So for the "Routing" category, I would want the value to be the sum of just data on the timesheet that have "routing" in Column E.
List Column Numbers Result Show In Textbox
Mar 23, 2008The list columns 5,7 and 9 has number entries.The userform has 3textboxes.is it possible to link total amount of this numbers result into the textboxes.Like column 5"CZ" entries total will showup in textbox10,column 9"DD" = textbox14
Private Sub TextBox2_Exit(ByVal Cancel As MSForms.ReturnBoolean)
Dim a, i As Long, ii As Long, b(), n As Long
ListBox6.Clear
With TextBox2
If .Text = "" Then Exit Sub
If WorksheetFunction.CountIf(Range("cv:cv"), .Text) = 0 Then
MsgBox "No Entry !"
TextBox2 = ("")
Exit Sub..........
Detect Numbers In A Cell Range And Then Change Cells Based On What Numbers Are Found?
Feb 27, 2014I'm going to be using a spreadsheet to keep track of where different people are at. So if Person 1 is in Room 3, I will stick a 3 in the box next to their name and then can look at the spreadsheet whenever I need and see what room they are in. When I'm deciding what room to put a person in, though, I need to be able to quickly glance at a list of Room #'s and see what one's are still available. So I have a bank of Room #'s in the spreadsheet....1,2,3, etc.
What I'd like, is some way to set this up so that when I put, for example, "3" in the cell next to "Person 1" the spreadsheet automatically removes "3" from the bank of available Room #'s and when I delete the "3" because the person has left, it adds "3" back to the bank of available Rooms.
Show Different Result If Match Is Found
Nov 21, 2006I'm having problems with a formula. Here is what I would like to do:
I have a named range named "J46DATA".
If B5 returns "N/A" when matching to "J46DATA" and S5<>0 then return "DELETE" or IF B5 returns "N/A when matching to "J46DATA" and S5 = 0 then return " ALERT". anthing else can return false.
I started of with
=IF(AND(ISNA(MATCH(B5,J46DATA,0))
But it wouldn't let me put the S5<>0 after that lat parantheses.
Find Text, Go To Found Cell & Show Message If More Than 1 Occurrence
Oct 1, 2008I have a file that the user selects and when they enter a value (in this case, a job title) into the input box, my macro looks for the value in that file. If the value is there, a msgbox pops up that lets the user know that the value was found and it then goes to that cell, displaying in the next msgbox the cell address of where the value was found. I already have the code down for this part of the macro.
My problem is what happens if the file has the same value more than once. Ideally, I'd like to display a message box that returns the addresses of both cells with the same value and then prompts the user to select one of these values as the value they are looking for. I am not sure if a msgbox or a msgbox and then an input box are most appropriate for this situation. Once the user does this, the macro continues. The rest of my macro is built on the cell where this value is, so it is crucial that I make sure there is at least one value selected. Any help is much appreciated. I have included a sample worksheet of what this situation might look like.
Here is the code I presently have for this part of my macro.
Sub GetOpenFileName()
strFind = InputBox("Please enter the job title you wish to search for:", "Search for job title in this file")
If strFind = vbNullString Then Exit Sub
With Sheets(strSheetsMainCompProfile)
If WorksheetFunction. CountIf(Range(Cells(1, 1), Cells(100, 100)), "*" & strFind & "*") = 0 Then
MsgBox strFind & " cannot be found on this sheet"
Else
Organize From Vertical Organization To Horizontal - Show Blanks Where Items Are Not Found
Jul 9, 2014I have a list of data that includes employee ID number in column A and a certain document that they have on file (onboarding docs such as I-9, W-4, copy of Social Security card, etc.) in column B. If one employee has 10 documents, they are listed with the same ID number 10 times in A1:A10 and the different document names are listed in B1:B10.
I want to clearly see which employee has which document by having the ID numbers going vertically in column A and then an X or check mark of some sort going across the rows.
The set up of what I would like filled in is in the sheet called "status" and the list of documents on file is in the sheet called "docs."check file.xlsx
I tried a combination of an IF and VLOOKUP with a MATCH function but I wasn't getting what I wanted.
Excel 2010 :: Dividing Numbers By Number Of Cell They Are Found In?
Feb 13, 2012I am using excel 2007 or 2010.
I need to divide the numbers on sheet 1 column D. This column contains numbers and blank cells so I need to divide by the actual number of cells that contain only numbers. I will be referencing the divided numbers on sheet 2 in a monthly summary format.
Show The Accumulated Amount Found In Another Worksheet Within The Same Workbook Where The Value Added Will Be Accumulated Only When The Criteria Is Met
Oct 22, 2009I have one worksheet in, which I have to show the accumulated amount found in another worksheet within the same workbook where the value added will be accumulated only when the criteria is met. I have enclosed herewith a sample of what I am trying to do since it is long to explain in writing. As the chinese proverb says: "better see once than hearing/reading 1000 of words.
View 8 Replies View RelatedRemoving Values From Column A That Are Found In Column C?
Jun 5, 2013I need to remove values from column A that are present in column C without modifying the order in column B. To be more explicit below is an example:
Column A---------Column B-------Column C
5230400----------81,50----------1660000
3275500----------78,00----------6245700
2856300----------47,50----------5230400
1879800----------62,50----------2497900
2124300----------99,00----------1879800
2497900----------65,00
4826900----------77,50
2124200----------34,00
6245700----------61,50
3324400----------86,00
1660000----------53,00
Column A represents 600 materials.
Column B represents 600 prices. (different for each material)
Column C represents 107 materials that are present in column A and have to be removed along with their prices in column B.
Now i want to remove the materials that are in column A and C along with their prices, so i won't damage the order in the file.Meaning if i delete a row in A and shift the other materials up or down, and in the same time column B remains unchanged, the remaining materials will have different prices...and that's not good.
Delete The Column If Condition Found?
Jun 10, 2014i want to delete the column which are blank
e.g
i have data in Column A1:N1 then delete the column O:Z
Insert New Column When Average Found In Row 3
Aug 12, 2009This code inserts a new column to the left of Column CV ...
View 6 Replies View RelatedInsert Row (2) Rows Above Value Found In Column
Dec 7, 2010I am trying to perform a simple insert macro. That will search column A for a value "Jack".
Once the value has been found insert a blank row, 2 rows up from that value. Not below.
Macro To Insert Column If Not Found?
Sep 4, 2013I would like a macro to order the columns as per the hardcoded list. If the column is not found than add the column at the position as per the hardcoded list. Below macro does the first part of re-ordering however if the column is not found how do I add an empty column:
Sub Reorder_Columns()
Dim ColOrder As Variant, i As Integer, Found As Range
ColOrder = Array("LogicalFileName", "LogicalFilePath", "UploadedDate", "UploadedBy",
[Code].....
Running A Macro When A Certain Value Is Found Anywhere In A Certain Column
Nov 26, 2008I’m working in Excel ’03 with a large table. I’m hoping to run a macro against a cell with value ‘X’ whenever that value is found within a particular column. I’d like this to be relative and not tied to a particular column so I can tweak it as needed down the road and run it against different columns.
In the example below, lets say I’m working with column B. I’d like something that would go through every cell in the column and run a macro when it comes across a particular value. Let’s say this value is x.
__A B C D E F
1 a x a a a x
2 b a b b b a
3 c x c c c c
4 f f f x f f
5 s s s a s s
6 g x g g g x
7 a a a a a a
8 s s s s s s
So, in my example, the macro would be run on B1, B3, and B6. And, if I wanted to go back in later, I could run this on column D and the macro would run on cell D4.
Use A Column Of Data If A Specific Value Is Found
Jun 11, 2006I have a set of data (time in minutes) below (fig 1) that I need to use if the total time between two entered times matches a coloms total. If it matches I want Excel to use the data in that colom to affect the data in another (fig 2) colom adding the times to each cell.
Looking at both figs. below I want Row B, Colom A in fig 2 to add Row A, Col A to Row A, Col A in fig 1 since both are the total of 19.
fig 1
Coloms A B C D
Row A 5 5 6 6
Row B 5 6 6 8
Row C 4 5 6 7
Row D 5 4 4 5
Total 19 20 23 26
fig 2
Coloms A B C D
Row A 1:00 2:00 3:11 4:01
Row B
Row C
Row E
Row F 1:19 2:20 3:33 4:27
Row F-A= 19 20 23 26
Copy Column Of Found Cell
Nov 3, 2006i'm having trouble with some of the codes...
i'm suppose to create a code that searches a specific phrase/word in a row, then from that row, i want to mark the entire column, so that i can copy it and paste it in a new sheet
eg. find 'NE_KENNUNG', once it's found, mark the whole column "C"(the column may vary), copy the whole column, paste on to a new sheet
here's what i've written so far..
-------------------------------------------------------------
Private Sub CommandButton1_Click()
Search ("NE_KENNUNG")
End Sub
Sub Search(strSrch As String)
Dim xFind
MsgBox "in Suchfunktion !"
If strSrch = "" Then Exit Sub
Search Column Delete Row If Value Found
Sep 5, 2007I need a VBA code that will search column H for any value that DOES NOT start with "9" (this is a character field). If it finds a cell that doesn't start with "9", I would like it to delete the entire row. It will need to repeat this process for every cell in Column H that has a value and then stop.
View 7 Replies View RelatedShow All Possible Combination Of Set Of Numbers?
Feb 10, 2006I am trying to show the all possible combinations of a set of numbers in Excel, in my case I think permutations are more appropriate to use. For example: there are three numbers 1, 2, 3 I want to show results like:
1, 2, 3
1, 3, 2
2, 1, 3
2, 3, 1
3, 2, 1
3, 1, 2
The functions in Excel available only give the total number, but I want to see these combinations!
Show Sum Of Only Numbers Seen Via Autofilter
Jan 7, 2009I want to have a cell report the sum of a column and have that sum change depending on which values I have filtered on another column. I have a cell reporting a sum of times in column E, but if I filter Column F to show only jobs for 1/16/09, I want that number to display the total time for just those shown. At this point, it just shows the total regardless of what is filtered.
View 3 Replies View RelatedShow Numbers Not Text
Feb 6, 2009I have over 2000 cells like the following
S304
S205
S204
S306
S207
and so on
Is there anything I can do to show just the numbers and not the S at the start without me having to delete each S individually?
Formula To Show The Numbers When They Are Below 30
Jun 4, 2009I need a formula to show the numbers as they are when they are below 30, but when they go above 30 I need it to display 30 every time. I have attched a file.
View 3 Replies View RelatedFormat To Show Specified Numbers
Aug 29, 2007I have a number format that I need assistance with:
The number format I need is 1234-000 or 1234-001
The normal number format is 1234-000, very rarely does the 1234-001 be used. So I would like the number format to left fill the left section 1234 and right fill the right section 001.
Highlight Only First Duplicate Number That Found In Column?
Aug 24, 2013I have sheet 1 and in c3
d3
1st
copy
[Code]....
this two column compare for duplicates and I manage to highlight (actually not bold) the number that is duplicate but I dont want to highlight the 2nd, 3rd & so on duplicate number in c3 (highlight 1 only from the 3 numbers most of the times got 2 only) . (row start from c3 to c2000 and d3 is up to d2000 also). I already use CF for highlighting the duplicate in C3 which my formula in CF is
=IF(ISERROR(MATCH(c3:c3,$c$3:$c$780,0)),"",c3:c3) I just try to do this formula and it works, but I dont know how to command not to highlight the 2nd, 3rd & so on duplicate number in C3 (C3 only can have duplicate number within the column; D3 doesn't have any repeat number in the D column.
I need to do the same formula command for other 2 partner columns (compare for duplicates this two columns & the 1st column if have to many duplicates highlight the first number that have more than 1 duplicates only) cells need to do again is for E3 & F3; G3&H3; until AU3&AV3..
is it possible to count how many highlighted cell (not bold) there is in a column (I mean total highlighted cell) and put the answer in cell C1, E1, G1, I1 ... AS1 , AU1. Tq again..
Delete Rows Until, Total Found In Column
Jun 24, 2009Is there a macro that will begin in cell A2 and delete rows until the contents “Total” is found in a random row in Column A?
View 4 Replies View RelatedIf Text Found In Cell Then Place A 1 In Another Column
Dec 21, 2009What I would like to do is if a string e.g. "*12/18/09*" is found in column A, then place "1" in column B. There are many rows that I would like to search. Either a formula or VBA would be fine.
View 6 Replies View RelatedHighlight Only First Duplicate Number That Found In A Column
Aug 23, 2013I have sheet 1 and in
c3
d3
1st
copy
1347
0934
[Code] .......
This two column compare for duplicates and I manage to highlight (actually not bold) the number that is duplicate but I dont want to highlight the 2nd, 3rd & so on duplicate number in c3 (highlight 1 only from the 3 numbers most of the times got 2 only) . (row start from c3 to c2000 and d3 is up to d2000 also). I already use CF for highlighting the duplicate in C3 which my formula in CF is
=IF(ISERROR(MATCH(c3:c3,$c$3:$c$780,0)),"",c3:c3)
I just try to do this formula and it works, but I dont know how to command not to highlight the 2nd, 3rd & so on duplicate number in C3 (C3 only can have duplicate number within the column; D3 doesn't have any repeat number in the D column.
I need to do the same formula command for other 2 partner columns (compare for duplicates this two columns & the 1st column if have to many duplicates highlight the first number that have more than 1 duplicates only) cells need to do again is for E3 & F3; G3&H3; until AU3&AV3..
is it possible to count how many highlighted cell (not bold) there is in a column (I mean total highlighted cell) and put the answer in cell C1, E1, G1, I1 ... AS1 , AU1. Tq again..
Search 1 Column All Worksheets & Go To Found Values
Aug 28, 2007I need a VBA script that can display a search box on multiple sheets within the same workbook similar to using ctrl + F and search values in column B only. If there is text or the row happens to be empty then it should skip that and only search numbers. Also the numbers in column B range from 50000 to 89000 and if there is a wrong number entered then I want to have a pop up box saying Error: invalid value or something like that.
Sub search_box()
Range("B49000").Select
Cells.Find(What:="some#", After:=ActiveCell, LookIn:=xlValues, LookAt:= _
xlWhole, SearchOrder:=xlByColumns, SearchDirection:=xlNext, MatchCase:= _
False, SearchFormat:=False).Activate
Cells.FindNext(After:=ActiveCell).Activate
End Sub
Calculate If Specific Word Found In Column
Feb 15, 2008I would like to use the following code to see if the word "reservoir" shows up in any of the rows in a certain column. If it does I want to insert the formula = SUM(D7:D257)*0.1 into cell C2 and if it doesn't then I want to put a 0 into cell C2. I've tried many routes but can't get past the error if it can't find the word.
Range("B7:B257").Find(What:="Reservoir").Activate