Working on a project and using a formula like this just so we can get the degree sign:
=TEXT(ROUND(DEGREES(ATAN2((C6-C30)/2,A25)),1),"0.0")&CHAR(176)
This obviously results in a text value.
How can I dump the TEXT function and the CHAR function and format the cell to display the degree sign and still be a numeric data type?
Need to convert decimal degrees into degrees, minutes, & seconds (displayed in three columns). Currently calculated manually from ATAN, ASIN, or ACOS functions.
View 5 Replies View RelatedI had a similar problem a day or two ago in converting Deg Min.dec to Deg.dec and it has happened again. This time I want to convert Degrees Minutes & Seconds to Degrees.decimals.
The formula I am using works for a two digit number Lat. but not 3 Long.?? Here it is below:
=+IF(A2<>"",INT((LEFT(A2,3)+MID(A2,4,2)/60+MID(A2,7,4)/3600)*100000)/100000&"d","")
how would you take decimals to dms, and also how to put dms into the right bearings?
Reference: Covert degrees, minutes and seconds to decimal degrees
I have a column in excel which includes numbers like (12 13 14.5), and I want to format like this (12 Degree Sign, 13 Minute Sign, 14.5 Second Sign).
View 9 Replies View RelatedI've writing excel formulas to convert Decimal Degrees (DD) to Degrees Minutes and Seconds (DMS) and back again for astronomy. These are for converting DD angles for telescope Right Ascension (RA) and Declination Angles (DEC) pointing.
I've got the formulas to work except for one minor annoyance. Try this formula for converting DEC DD angle of -1.5° to a DEC DMS angle: ....
I have degree values as this 4145.5
Which is 41 degrees 45.5min
and 0010.2
Which is 0 degrees 10.2min
I need 4145.5 and 0010.2 to be converted to decimals so that I can add and subtract them
Then the answer needs to be converted back into
a format like this
45° 45.5'
I am trying to convert Degrees Minutes & Decimals of a minute (12° 34.567') to Degrees and decimals of a degree (12.57611°). I have the formula to convert latitude, that is two digits, but it doesn't want to work with longitudes, three digits. (see attachment). This is the formula that I am using:
=IF(A2="","",(INT((LEFT(A2,3)+MID(A2,4,6)/60)*100000)/100000)&"d")
I have a spreadsheet that is so long ie columns that i have decided to flip it over so that my old row titles are now column headings and my column heading are now row titles.
The reason for this is that I need to enter more that 256 columns into my worksheet matrix and I only have 209 rows thus light bulb moment turned the whole spreasheet 90 degrees within the worksheet!
i am trying to finish a spreadsheet off using cos functions. I want to convert 26 degrees into 0.8988. when i use my hand calculator i type 26 in then press cos and it converts it to 0.8988 which is correct, but when i try to use the excel cos function it gives 0.646919322 which is in-correct.
View 5 Replies View RelatedI am trying to work out how to convert the slope/gradient from degrees to %, and ratio.
View 7 Replies View RelatedHow do I rotate sheet tabs 90 degrees?
View 1 Replies View RelatedHow do I custom format a cell to display degrees minutes seconds. I now there is a way. I found in on the web once but can not find it again. The formating from cpearson does not work the way i want.
For example if in cell a1 I input 50.2536, I want to to format the cell as 50° 25' 36". opefully this can be applished without any formulas. Either soem code or formating would be great. The last time I found it I thought it was something like ###° ??'/??" but that did not work. Thanks in advance. The reason I need it, is to use the convert_decimal function I found on the microsoft website.
I have a label in a userform which is picking up data from sheet1.range("a1") and i would like it to show along the left side of the userform so rotated at 90 degrees.
I do not have to use a label but I do need the data to be shown at 90 degrees.
I have created a table in Excel that I want to import in a word portrait page, but would like to rotate it to 90 degrees.
I would like the table to take the whole page and that I still have some space above the table to put table number and description.
I have uploaded the table in excel and a screenshot of the way I would like the table to appear in word file.
The problem I am having is in trying to make a custom cell format for inputting my data. I want it to appear as 44° 41' 5" (in the same cell). I would like the cell to function so that if im inputting data manually for it to automatically put in the appropriate (degree,minute or second marks). That way I could just enter somthing like 44 41 5 and it display properly. Also I am trying to keep the data in text format for another marco I am running to convert the DMS data into decimal.
View 2 Replies View RelatedNeed to convert decimal degrees into degrees, minutes, & seconds (displayed in three columns). Currently calculated manually from ATAN, ASIN, or ACOS functions.
View 4 Replies View RelatedI have created a userform but I am having extensive problems with the date formats.
My system is set to UK and short date is set to: DD/MM/YYYY
When I used code to add the values in the userform to the spreadsheet, any that contained a date format would revert to the US format.
So I finally figured out to use DateValue to format it correctly for example: ...
I have a column of cells with values - 0.2%, 0.32%, 0.22, 0.5 etc. The cells with % symbol are in ' Percentage, 2 decimal' format while the plain numbers are in 'General' format i.e. column contains cells in either of these formats. I need a macro where I can specify the column and it will select the cells with the % format, convert it to 'General' and multiply the result by 100 eg. 0.2% converted to 'General' becomes 0.002. When multiplied by 100, result is 0.2 i.e. is displayed without the % symbol.
View 7 Replies View RelatedOne of the reports I run provides me information on lengths of time. Such a field displays as |0:09:16| indicating 9 minutes and 16 seconds. However, when the report generates the excel spreadsheet it saves these cells in date/time format ([h]:mm:ss). If I were to convert this field to the number format (so I can manipulate and graph it) it displays as such |0.00643460648148148| Ideally I would be able to have the data in the field stored as |556| (556 seconds, or 9 minutes 16 seconds). I have thousands of fields that I need to manipulate where the data is stored in this format and I can not figure out how to fix it.
View 5 Replies View RelatedHow can I format cells to contain Minutes, Seconds and Hundredths of seconds to be used in calculations eg 1.24.99 means 1 minute and 24.99 seconds. Example calculation is: 1.24.99 - 1.24.90 =0.0.09
View 2 Replies View RelatedI need to format some climatic data from a weather station into a desired format. There are a lot of cut&paste and transposing involved. I think it will be easy but tedious for anyone trained in VB to write a macro but unfortunately I am not. I've tried recording a macro but it turns out that it is not general enough to deal with all the spreadsheets that I've got.
I've attached a spreadsheet which shows the original format (in sheet 1) and the desired format (in sheet 2). To briefly describe, I only need the temperature data for 8am and 2pm, the rest of the information in sheet 1 is useless to me.
Every month, I have an import a report to a spreadsheet. At my column A, it supposed to be a date format.
For some reasons, I have a combination of a few cells of date format and a few cells of general format with no order at all.
What I need is: Search in the A column, if date format leave it , if not change from general to date format.
I have an Excel 2010 spreadsheet where the default number format keeps switching to the date format. I keep switching it back and it'll stay as a number format for a time, but then it'll switch back. This is also the case for any new worksheets in that one spreadsheet.
This only happens with this one file - everything else behaves according to my regional settings or to how the file had been previously formatted.
I have a Sheet ( Named "Summary" for Example ) of about 4,000 Rows that has a LOT of Conditional Formatting.
I Added Another 100 Rows this Morning and when I Tried Saving it a Message Saying that Not All the Formatting for the New Data that had Been Added had Been Saved. Is there a Macro or Something I can Run that will Make the Conditionally Formatted Cells Stay the Colour that they are but Delete the Conditional Formatting Part of it Achieved Using "Format" & "Conditional Format" from the Menu Please.
Ideally I would like to be Able to Enter the Number of Rows ( From Row ? to Row ? ) that I want this to Apply to.
I have a forecast which is sorted by product code by week vertically. I need to create a lookup to re-format this information into a horizontal format by week. I have started this by transposing the information as my attachment shows but I am hoping there is a lookup formula which will be easier and quicker. I have attached the actual document and the data I want to sort is Sheet 2. I have started in Sheet 1. I want to look up the code in column A, then lookup the week number which would be B2 in Sheet 1 and return the value of that Code in that week from Sheet 1.
View 2 Replies View RelatedI would like to have a single button that changes a range of cells from the USD to EURO to perhaps CAD symbol. Can this operation be performed, such that if I start in dollars, and I click the button once, it shifts by range to EURO (not formulas...just symbol)...and then if I click the same button again, it goes to CAD, and then back to USD with a third click?
View 5 Replies View RelatedI have around 30k data. which is in invalid format.
Ex: 12987654321vinay kk 876543219
32567456789 kkccjhg fo 345678921
I want to convert this into correct format as below with start letter from
MOD, 987654321,, vinay, kk,87654219
MOD,567456789, , kkccjhg, fo,345678921
I want to know which are formulas I have to use to get this info in correct format.
In order to export an excel table into another program I first need to save the excel file as .txt. The .txt file can then be imported by the other program.
First I however need to make excel understand that the value should be a text and not a value. I therefore format the number as text (0000150235) by adding "0000150235". After saving the file as .txt the format changes from "0000150235" to """0000150235""". I do however need the format in the .txt file to be "0000150235". Can anyone tell me how I can save "0000150235" as .txt and get the value "0000150235" in the .txt file.
I'm trying to format my email generated of excel sheet to have an HTML formal before they are sent out using MS Outlook.
I have googled, searched your forums and also tried to figure out a solution with the existing helps on the internet. I need help on how to format emails genarated out of my excel sheet. I know a bit of HTML syntax but a newbie to VBA. I'm guessing the formatting has to be done in the Emailbody text function in my code.
I'm also trying to understand the logic behind the code and also learning excel vba bit by bit at the minute.
