I have a drop down validation list on sheet A that refers to my list on sheet B. I would like to formulate a cell on sheet C to give a value from a cell on sheet D based on which item is chosen from the validation list.
View 4 RepliesI seek to create a date validation list based on information is another cell (see images)
Based on (data validated list) Cell B4 - have a validation list drawn from another tab on the same worksheet "Sub regions"
equally the same with sub regions and citys...
I am attempting to use a named range as my Validation data source but have two questions:
1) It seems when you use a named range as a source the user can enter in any data they want in that cell. I really only want the user restricted to the list I give them. If I enter the list manually in the source box then it works but I really want to use a named range
2) My range is fixed to 10 cells and the user can enter in as many variables as they want (up to ten). When a user clicks on one of the cells that the validation is set to read the range the user has to always scroll to get to the top. When selecting the cell Ecel always defaults to the bottom choice in the list. I want to minimize the VBA because Mac users will be using this and VBA seems to be touchy with macs.
I have a validation list list in column E "Check, Charge, Credit Card, Other". in another column i have what i thought was a straight forward IF statement: =if(E3="Check",9999,"[ ]")
It does not recognize "Check" as the condition. Is there a tweak i can do to get it recognize the data validation.
I'm trying to create an excel template to log tickets , which should allow me to categorize the tickets in two to three levels. For ex : In the spreadsheet attached , in I4 I have done the first categorization as Fruits , now J4 should populate the list based on I4 selection. I have attached a sample spreadsheet for better explanation.
View 2 Replies View RelatedI'm trying to have a Data Validation list issue where I want to populate a second list based upon the value of the first list.
In this instance I have a Department in the drop down and Employee Name in the second drop down and I want people to only see Employee names if they're allocated to a particular Department. I've been able to do the list using the INDIRECT function, however that only works when there's only a small sample of both names & depts, however I'm looking at populating this document with around 3000 people and over 250 departments, so I would like to be able to use Column J on the Source Tab to populate the details on the Manager Entry tab.
I have attached a sample spreadsheet if I've not explained very clearly.
TIMESHEET sample.xlsx
I want to populate a Data Validation based on values in another cell on another worksheet--but, I want to populate it with the values stored in the cell right next to the cell. http://i32.photobucket.com/albums/d3...n/untitled.jpg. would be an example....
What I want my Data Validation List to do is to look at column B and wherever it sees a certain color--for example, red, I want it to put the corresponding value in column A in the list.
In sheet 1, there are two columns, Category and Subgroup. The cell validation for Category is pulled from the category list on sheet 2. Basically, what I want to happen is depending on what is selected as the category, only the related sub-groups would be populated in the sub-group validation dropdown list. In other words, if Fruit is selected as the category, I only want Apple, Orange, Pear, Banana, etc to be in the validation drop down list for the sub group. If vegetable, then only Corn, Green Bean, Cucumber, and Peas should be shown.
I've included two options for the relationship list as I'm not tied to either style and not sure which would be easier to work with.
Every two weeks: During Payroll, we have a list of managers and specific employees under that manager.
The managers name is in Column A and they repeat.
Normally we filter that manager, copy and paste the data into a new Workbook, save it, and send the info out to that manager. We do not want other managers to see the information provided to the specific manager.
This is a long tedious process as there are close to 30 managers.
1. Is there a way to run a macro (presumably based on a validation list) to filter, copy the worksheet into a new workbook for each of the 30+ managers?
2. Is there a way to save each with a specific name like "Payroll Feb11 - Manager Name.xlsx"
What I would like to do is hide rows 27:30 if the data validation list is equal to "Select Product...". The list is in B27:B30. I've search the forum but couldn't get the codes to work...
View 9 Replies View RelatedI have created a cascading data validation list, and I would like to have an adjacent cell auto populate according to the dropdown selection.
Data Eg:
Oranges 1100
Apples 1101
Pears 1102
Grapes 1103
If the user selects "Pears" from the dropdown list, I would like the adjacent cell to populate with the numerical code for "pears", in this case 1102. I am designing a new expense report form at the office, and I am at a standstill with this problem.
I'm looking for a method, vba macro or Excel code, to preform the following task:
In the C column the user chooses one of several options from a menu, let's call these options 1 - 10 (this part is already done). Depending on the choise, different things are supposed to happen:
For 1-9, the formulas for cell A - Q on the current row should be copied to the next row (but with +1 in row number in formulas of course).
For 10, 3 blank rows should be created (well they already are blank..), on the forth row down, A3 - Q3 should be copied exactly. On the fifth row, the same formulas thing that was created for choise 1-9 should be created.
Since the real xls-file is too big already and it contains some sensitive information, I can't attach it here, but I made a small and similar xls-file, that better explain what I want to do.
I am trying to make a simple planning sheet.
I have a workbook with 2 sheets.
1.sheet contains Columns : DayDateTimeClassTeacherCovered
2. sheet contains the availability of teachers. so all columns start with a date and the rows contain the name.
A row therefore looks like this.
7/1
Harley
Lidia
Livia
Thais
Salete
Carla
My issue: The 1.sheet has a column Teacher, now in this column I want to have a drop down list. (E2, E3, E4, E5 ... etc..) This list is depended on the date which is in column B.
Essentially I want the list to look up date in its row go to the second sheet and give me all the possible names in it. That is all.
What I am trying to do would appear to be very simple. I am trying to build a quotation form for our sales guys to use. I would like to use a drop down list with the list of products in, which I have created using a list in a second sheet and then using a data validation drop down list.
What I would like to achieve is the sales person selects the product (of a list of only 14) from the list and excel to automatically fill in the two columns to the right with the model no. and also the price.
Would it be possible to use an IF statement as there are only 14 products to choose from? Is there a better way of doing this? I have created the lists of model numbers and prices in the second sheet alongside the product name which the drop down list sources from.
I am building an Excel file that will be used to track information and at the core of it all is a list of people from different offices where the number of people per office can change and/or a person leaves the company and is replaced by another. I'll simply:
Column A Column B
Office Employee
Hamilton Emp 1
Hamilton Emp 2
Hamilton Emp 3
Toronto Emp 4
Toronto Emp 5
Toronto Emp 6
Toronto Emp 7
Toronto Emp 8
Waterloo Emp 9
Waterloo Emp 10
This will be all on Worksheet 'Info'. I have a Worksheet for each Office and named them accordingly. On each worksheet I want to use Data Validation on a column, we will call it 'ChosenOne', set it as 'List' and have the Source pull all the employee names that belong to that office and use them as a selection
ex: Hamilton Worksheet, 'ChosenOne' would show Emp 1, Emp 2, and Emp 3 in the list.
If Emp 3 changed offices to Waterloo 6 months from now I would like to change A4 from Hamilton to Waterloo and the formula would not have to be changed and the next time someone selects 'ChosenOne' it would only show Emp 1 and Emp 2.
Of course this means on the Waterloo Worksheet, 'ChosenOne' would show Emp 3, Emp 9, Emp 10 now.
So basically I am trying to not specify a specific named range for each office and am hoping there is a way to poll information from a Table (or any other tool that can simplify this).
I would be ok with something like:
Column A Column B
Office Employee
Hamilton Emp 1, Emp2, Emp 3
Toronto Emp 4, Emp 5, Emp 6, Emp 7, Emp 8
Waterloo Emp 9, Emp 10
and just move Emp 3 from B2 to B4 but I don't know if a list can be created from multiple items in a single cell seperated by a , or ; or :.
In all the cells in column F I have a validation list with several predefined choices, but at the bottom of this list I want an "Other..." option, which when chosen, enables the user to enter a new string in that cell if none of the predefined did not match.
View 7 Replies View RelatedI want to select a Hyperlinked file.These files are named using Data in ColumnA,B & C. The realtionship between filename and data in columns is; A-B-C.ext. After selecting data A from the dropdown list,i should be able to select corresponding data B and then again another dropdown list for corresponding data C.This should show the desired already hyperlinked file. I want to select the hyperlinked file name by simply selecting all the three data independently.
View 3 Replies View RelatedSee attached spreadsheet, in sheet 1, yellow columns are for restricted cells and Sheet 2 contains the lists for such columns' validation range. Sub-Strategy is dependent on the choice made from Main-Strategy, e.g. if Main-startegy = EquityHedge, then the choices for sub-strategy can only choose Long Biased, Low Beta & opportunistic. But I also have a "Other" category under Main Strategy, Sheet 2 cell G1, if this is chosen then I would like to remove the data validation in the sub-strategy column, (i.e. u can input anything for sub-strategy) how can I do this?
View 2 Replies View RelatedI have been searching through the site trying to find a solution to my issue, but I just can't seen to fixt it. Here is the scenario. I am working on a spreadsheet that will read some data, use that data to update the main chart and fill in the information in a table next to that chart. I recoreded 22 macros, total. Each macro corresponds to the especific type of chart that I need/want.
I want to be able to click on a drop down menu above the chart which will have each of the 22 options. Once the user clicks on the desired option, the specific macro will run and do that it should do. When I run the individual macro (without the VB that I wrote and will mention below), the system does what it should do. Everything looks dandy. But then I added this VB code to the sheet where the chart is:
Private Sub Worksheet_Change(ByVal Target As Range)
Select Case Target.Range("A12").Value
Case "1"
Call a
Case "2"
Call b
Case "3"
Call cc
Case "4"
Call d
Case "5"
Call e................
I'm working on a simple worksheet, it is a tracking sheet for programs taught. What I'm trying to find is a code to insert a row based on a Data Validation List.
Exampl of data:
Column A is for " Name" then futher down Column K is "Program Taught" and Column L is " Date Taught".
Column K is where the Data Validation List is located with a in cell drop down.
What I would like to do is when a user selects a program from Column K a row is inserted with all of the formulas and formats from the previous row, and upon insert would like it to copy Column A into the new row.
This would be so I can keep a historical of programs and dates taught.
And to really spice things up I want to lock Columns K & L of the previous row after the new row is inserted.
I want to create a validation list with value comming from formula and I got blanks line. I have to create a dynamic list, I can have 15 possibility and it came from a lookup formula. When I choose the 15 cell with the lookup formula it show the empty cell. I did a exemple of my problem. You can check the attachement to understand my problem in the cell C1.
View 2 Replies View RelatedI have a data validation cell that has 5 items to be selected, lets say A-E.
I would like a macro that checks and does the following:
A or B selected, hide row 25-34, rows 45- 53
C or D selected, hide row 24-44
E selected, hide rows 34-53
In each case, the macro should check and unhide all rows between 25-53 before doing the above
I have the following macro that exports pdf's for every value in a validation list. Currently it's setup where I have included each value in the macro. This is fine with just a few values but I am about to add 900.
My question is, is there a way to write the macro so it exports a pdf for every value within a dropdown list until it hits a null value instead of what I have below so i don't have to repeat everything for every value in the list?
Here is what i currently have.
Sub Export_MarketSpecific()
'
' Export_MarketSpecific Macro
'
'
Sheets("Home Page").Select
Sheets("MOA-Page 1").Visible = True
Sheets("MOA-Page 1").Select
Sheets("MOA-Page 2").Visible = True
Sheets("MOA-Page 1").Select
Range("D2").Value = Range(Range("D2").Validation.Formula1)(2).Value
[Code] ..........
I am trying to create an interactive Price List / Quote Form. I have 1 tab (price list) that contains all data arrays. I have 1 tab (Items) that correctly calls avalable quantities based on a validation list and then Vlookup populates the formulas with the correct pricing & notes based on the quantity. I would like on the cover/quote page to have a drop down (in cells B23-30) where someone can choose a product based on the list, and then have the collums C,D & F populate with the rest of th information:
Column C with quantities for that product
Column D with pricing based on that quanity
Column F with notes for that quantity
Column E will calculate total based on simple math
Enclosed is my file
What I have:
I have 12 months in a year and each number represent a month. I have generated lists of data mainly interest and principle payments from 12 amortization sheets which i have just copied into the attached spreadsheet and will change accordingly based on the loan terms which doesn concern us. For our purposes we wont make distintion between principle and payment as i just need to see how to make what i need work.
What I need:
I need to offset data vertically automatically once i the user selects an option value (Number in this Case) from the validation list located within the Payment control box. Going from left to right you see the raw data but in this example i need the data on the right hand side to be offset down the number of rows which may be found in the control box as a validation list.
IE:
So if i were to use "Loan I" [L6] and select a "2"[J6] from the "Payment Control" then the data on the right hand side [L6[ would reflect a $0 but instead the new value for L7 would be "$24.96" and would continue down for about 374 rows. This will have to be done for Loans I - Loans N [L6:Q6] respectively. This is all i need in order to compile and make use of in my spreadsheets.
Thanks and cannot be a formula as forumlas will be overwritten and cannot be a macro so it must be a module in itself so it an run when the list is changed.
the single digit values in coulmns M6:Q3 are there mainly so you can see the difference between the base and the position at which the data is placed at. its not need but is there to stress and to show the number rows in offset of data.
Attached is example of what I'm trying to do. I want to use the drop-down on the "Master Tab" and have the corresponding price by promo_month appear in the yellow cells.
Currently its on July, but I would like to switch that to August etc and have new prices populate in the yellow cells. Prices come from the "table" tab.
Example 06.19.14.xlsx
I'm using Excel 2007. I would like to seek some advise on how i may update cells after selecting a month from a drop down list.
i have created a simplified version of what i intend to have. One the 1st tab 'Cash Budget 2009', i have filled up a table with numbers, sorted by months. On the 2nd tab 'Dec09', i would like to create an expense table, to be able to be selected by month. So i have created a drop down list based on the months that are created in the 1st tab.
Upon selection of the month from the drop down list, i would like the cells to display (fetch) the data from the 1st worksheet. It would also be helpful if the name of the 2nd tab can be updated to read as the month that is being selected.
I've created seven names in my data validation source list on Sheet 3 in the following range of cells, A2-A7. My data drop down validation list is located on Sheet 1, A2 in the same workbook. I would like to trigger a macro based on the name I select in this drop validation drop down list that will fill out an address, telephone number, and email address in the following cells next to my data validation drop down list on Sheet 1: B2, B3, and B4. I want it to be designed so that users will select a name and have that person's corresponding address, telephone number, and email address fill right next to their name on the same sheet.
View 6 Replies View RelatedBasically on a summary page, on sheet 1 say I have a formula which picks up the unit cost (I have this as an array across 5 years)
What I then want to do is multiply this by a volume driver. I have a list of these drivers on a seperate page, so for convenience lets say DRIVER_01,DRIVER_02 etc. These are also 5 years arrays.
So what I want to do it be able to select which driver I want to use for volume on the summary, from a drop down box I have set up, and then the formula pick up that named range, and not just recognise it as a text cell.
I need the ability to change the driver in the future, hence the drop down box. I can also get the unit array part to work fine, I'm just struggling to get this driver array to work..............
We receive payments in either USD or HNL. I want to be able to have a final price (last column) that puts all prices in USD. I have a reference cell on a separate worksheet (drop down inputs) that we will use to store the data for validations and the conversion rate. We use one conversion rate for all transactions for a fiscal year, so only need to update once a year. Not sure how to make this work.
View 2 Replies View Related