I have a data validation cell that has 5 items to be selected, lets say A-E.
I would like a macro that checks and does the following:
A or B selected, hide row 25-34, rows 45- 53
C or D selected, hide row 24-44
E selected, hide rows 34-53
In each case, the macro should check and unhide all rows between 25-53 before doing the above
What I would like to do is hide rows 27:30 if the data validation list is equal to "Select Product...". The list is in B27:B30. I've search the forum but couldn't get the codes to work...
View 9 Replies View RelatedI am creating a disclaimer in one of my sheets.
Cell I15 contains 'Are you a resident for tax purposes?' Cell N15 has the data validation list of Yes or No.
Then I have a button below which covers rows18, 19 and 20.
Is there a way I can have this button hidden until Cell N15 = Yes?
I'm looking for a method, vba macro or Excel code, to preform the following task:
In the C column the user chooses one of several options from a menu, let's call these options 1 - 10 (this part is already done). Depending on the choise, different things are supposed to happen:
For 1-9, the formulas for cell A - Q on the current row should be copied to the next row (but with +1 in row number in formulas of course).
For 10, 3 blank rows should be created (well they already are blank..), on the forth row down, A3 - Q3 should be copied exactly. On the fifth row, the same formulas thing that was created for choise 1-9 should be created.
Since the real xls-file is too big already and it contains some sensitive information, I can't attach it here, but I made a small and similar xls-file, that better explain what I want to do.
I want a code to Hide the row if "sum of numbers in columns three thru last column" = 0. Following is a code I use to delete a row if that is blank. The difference here is that I dont want to to check first two columns and I want to hide them rather than deleting.
View 4 Replies View RelatedI want to load the actual data exist in the rows by selection value from the data validation list.
E.g I have two worksheet in one excel file. One has a data activities of persons with their name like two columns i have in which one exist the name of person and second exist the activities which they perform.
On the second sheet, i made a data validation list of all the person names
Now my requirement is, when i select a person name from the list, load all the data from the 1st sheet to second sheet. Is this possible without VB code, because I want to share it on the Google sheet with my boss, where VB sheet is not supposed to work.
I have the following macro that exports pdf's for every value in a validation list. Currently it's setup where I have included each value in the macro. This is fine with just a few values but I am about to add 900.
My question is, is there a way to write the macro so it exports a pdf for every value within a dropdown list until it hits a null value instead of what I have below so i don't have to repeat everything for every value in the list?
Here is what i currently have.
Sub Export_MarketSpecific()
'
' Export_MarketSpecific Macro
'
'
Sheets("Home Page").Select
Sheets("MOA-Page 1").Visible = True
Sheets("MOA-Page 1").Select
Sheets("MOA-Page 2").Visible = True
Sheets("MOA-Page 1").Select
Range("D2").Value = Range(Range("D2").Validation.Formula1)(2).Value
[Code] ..........
Like to create a macro (button) to hide / unhide rows based on a cell value
Example
A1=No then hide roa A
C1=No then hide row c
I want a code to Hide the row if "sum of numbers in columns three thru last column" = 0. Means, if the sum of all the cell (except first and second cells in that row) in a row is zero, then that row should be hidden.
View 9 Replies View RelatedI have read several related threads and tried to adapt their answers to my application with no success. I am trying to write a macro that will hide rows based on that row's value in a certain column. Specifically, column AB contains sums and if a sum equals 0 I want to hide that row. The sums start at AB5 and go to AB118 but there are 4 gaps in the column at rows 25, 47, 70, and 94.
View 9 Replies View RelatedI'm trying to have a Data Validation list issue where I want to populate a second list based upon the value of the first list.
In this instance I have a Department in the drop down and Employee Name in the second drop down and I want people to only see Employee names if they're allocated to a particular Department. I've been able to do the list using the INDIRECT function, however that only works when there's only a small sample of both names & depts, however I'm looking at populating this document with around 3000 people and over 250 departments, so I would like to be able to use Column J on the Source Tab to populate the details on the Manager Entry tab.
I have attached a sample spreadsheet if I've not explained very clearly.
TIMESHEET sample.xlsx
I want to populate a Data Validation based on values in another cell on another worksheet--but, I want to populate it with the values stored in the cell right next to the cell. http://i32.photobucket.com/albums/d3...n/untitled.jpg. would be an example....
What I want my Data Validation List to do is to look at column B and wherever it sees a certain color--for example, red, I want it to put the corresponding value in column A in the list.
I have three individual lists and I am using a formula like this for each of them =OFFSET(Table1,MATCH(F15,Table1,0)-1,1,COUNTIF(Table1,F15),1)
for my final cell I need to create another data validation list which is depenant on the values selected in the previous three lists.. how I would alter the formula to allow me to do that? I tried using and after the match to match all three tables but it never worked
I am trying to create a macro that will work on my master summary sheet. The sheet pulls information from other worksheets. I would like to have a macro that will look at range E7:E356. If the value is 0 then hide, but if the value changes then unhide the row. I have tried autofilter but it will not update automatically.
View 1 Replies View RelatedI want a macro to hid rows based on a specific value of a cell compared to another.
Example, In a cell I have the current date and time which updates when the the sheet is opened... On a row I have various info including another date in the past. When the date in the past goes over 6 months older than the current date, I want to hide that whole row.
Is this possible? Do I use an IF function in the macro I've seen to remove rows based on cells with specific values?
I need to do: Based on whether a cell returns "Export" from a vlookup function, I need a macro to run, hiding some cells and unhiding others at the same time. Also, if possible, if the cell's value changes from "Export" to something else, I need it to revert back to the original hidden/visible rows.
Like to create a macro (button) to hide / unhide rows based on a cell value
Example
A1=No then hide roa A
C1=No then hide row c
What I am trying to do would appear to be very simple. I am trying to build a quotation form for our sales guys to use. I would like to use a drop down list with the list of products in, which I have created using a list in a second sheet and then using a data validation drop down list.
What I would like to achieve is the sales person selects the product (of a list of only 14) from the list and excel to automatically fill in the two columns to the right with the model no. and also the price.
Would it be possible to use an IF statement as there are only 14 products to choose from? Is there a better way of doing this? I have created the lists of model numbers and prices in the second sheet alongside the product name which the drop down list sources from.
I am building an Excel file that will be used to track information and at the core of it all is a list of people from different offices where the number of people per office can change and/or a person leaves the company and is replaced by another. I'll simply:
Column A Column B
Office Employee
Hamilton Emp 1
Hamilton Emp 2
Hamilton Emp 3
Toronto Emp 4
Toronto Emp 5
Toronto Emp 6
Toronto Emp 7
Toronto Emp 8
Waterloo Emp 9
Waterloo Emp 10
This will be all on Worksheet 'Info'. I have a Worksheet for each Office and named them accordingly. On each worksheet I want to use Data Validation on a column, we will call it 'ChosenOne', set it as 'List' and have the Source pull all the employee names that belong to that office and use them as a selection
ex: Hamilton Worksheet, 'ChosenOne' would show Emp 1, Emp 2, and Emp 3 in the list.
If Emp 3 changed offices to Waterloo 6 months from now I would like to change A4 from Hamilton to Waterloo and the formula would not have to be changed and the next time someone selects 'ChosenOne' it would only show Emp 1 and Emp 2.
Of course this means on the Waterloo Worksheet, 'ChosenOne' would show Emp 3, Emp 9, Emp 10 now.
So basically I am trying to not specify a specific named range for each office and am hoping there is a way to poll information from a Table (or any other tool that can simplify this).
I would be ok with something like:
Column A Column B
Office Employee
Hamilton Emp 1, Emp2, Emp 3
Toronto Emp 4, Emp 5, Emp 6, Emp 7, Emp 8
Waterloo Emp 9, Emp 10
and just move Emp 3 from B2 to B4 but I don't know if a list can be created from multiple items in a single cell seperated by a , or ; or :.
I want to select a Hyperlinked file.These files are named using Data in ColumnA,B & C. The realtionship between filename and data in columns is; A-B-C.ext. After selecting data A from the dropdown list,i should be able to select corresponding data B and then again another dropdown list for corresponding data C.This should show the desired already hyperlinked file. I want to select the hyperlinked file name by simply selecting all the three data independently.
View 3 Replies View RelatedI'm working on a simple worksheet, it is a tracking sheet for programs taught. What I'm trying to find is a code to insert a row based on a Data Validation List.
Exampl of data:
Column A is for " Name" then futher down Column K is "Program Taught" and Column L is " Date Taught".
Column K is where the Data Validation List is located with a in cell drop down.
What I would like to do is when a user selects a program from Column K a row is inserted with all of the formulas and formats from the previous row, and upon insert would like it to copy Column A into the new row.
This would be so I can keep a historical of programs and dates taught.
And to really spice things up I want to lock Columns K & L of the previous row after the new row is inserted.
I would like to hide rows for data that does not meet specific criteria. For example: If a user selects room number 101 from a drop down in B1, I want to filter data in range A3:F1000 to show me only room 101 rows (A column) where C column contains a value larger than zero OR D column contains a value larger than zero OR E column contains a value larger than zero. I do not want it to return rows where 101 may be in other columns beside A.
Sample:
A B C D E F
__________________________________
1 ROOM: 101
2
3
4 101 XX 1.2 0 0 P
16 101 YA 0 0 1.1 L
23 101 JJ 3.2 2.1 0 L
55 101 JJ 0 0 1 P
So, if a row contains 101 in column A and all three values in columns C, D, and E equal 0, then those rows will be hidden.
I have a spreadsheet that calculates percentages and then outputs the results to a pie chart. There are 9 different percentages being graphed in cells A41 to A49. The chart looks weird if any of the percentages end up being 0, so I have the formula set to add 0.00001 to each calculation (so they show up as 0% and display on the chart as 0%, but truly are 0.00001). I would like it so that if any of these 9 percentages ends up being 0 (or really 0.00001) that the row automatically hides and thus won't display on the pie chart. How can I create a macro that automatically runs to accomplish this, and automatically updates as percentages are recalculated.
View 3 Replies View RelatedWhat I have:
I have 12 months in a year and each number represent a month. I have generated lists of data mainly interest and principle payments from 12 amortization sheets which i have just copied into the attached spreadsheet and will change accordingly based on the loan terms which doesn concern us. For our purposes we wont make distintion between principle and payment as i just need to see how to make what i need work.
What I need:
I need to offset data vertically automatically once i the user selects an option value (Number in this Case) from the validation list located within the Payment control box. Going from left to right you see the raw data but in this example i need the data on the right hand side to be offset down the number of rows which may be found in the control box as a validation list.
IE:
So if i were to use "Loan I" [L6] and select a "2"[J6] from the "Payment Control" then the data on the right hand side [L6[ would reflect a $0 but instead the new value for L7 would be "$24.96" and would continue down for about 374 rows. This will have to be done for Loans I - Loans N [L6:Q6] respectively. This is all i need in order to compile and make use of in my spreadsheets.
Thanks and cannot be a formula as forumlas will be overwritten and cannot be a macro so it must be a module in itself so it an run when the list is changed.
the single digit values in coulmns M6:Q3 are there mainly so you can see the difference between the base and the position at which the data is placed at. its not need but is there to stress and to show the number rows in offset of data.
Operating System: Windows XP, Excel version: 2003
Aim: To create a Macro to hide all rows where the date in column D is before today. Column D has about 600 rows.
Current solution:
Code:
Sub Hide_Old2()
'Worksheet name
With Worksheets("Schedule")
'set start of date range
Set rngStart = .Range("D2")
'find end of date range
[Code] .....
The problem with this solution is its speed, or lack thereof. It causes the screen to hang and flicker while it cylces through. Is there some way to create a range based on the date and hide the range? or another solution?
Note: Autofilter is not an option, as the spreadsheet with the dates needs to be kept simple for other stakholders and the macro is being run from another sheet.
(Excel 2010): Hide row if cell C in this row is empty.
I've just started using macros and I'm sure there is one for this problem.
Attached is example of what I'm trying to do. I want to use the drop-down on the "Master Tab" and have the corresponding price by promo_month appear in the yellow cells.
Currently its on July, but I would like to switch that to August etc and have new prices populate in the yellow cells. Prices come from the "table" tab.
Example 06.19.14.xlsx
I'm using Excel 2007. I would like to seek some advise on how i may update cells after selecting a month from a drop down list.
i have created a simplified version of what i intend to have. One the 1st tab 'Cash Budget 2009', i have filled up a table with numbers, sorted by months. On the 2nd tab 'Dec09', i would like to create an expense table, to be able to be selected by month. So i have created a drop down list based on the months that are created in the 1st tab.
Upon selection of the month from the drop down list, i would like the cells to display (fetch) the data from the 1st worksheet. It would also be helpful if the name of the 2nd tab can be updated to read as the month that is being selected.
I've created seven names in my data validation source list on Sheet 3 in the following range of cells, A2-A7. My data drop down validation list is located on Sheet 1, A2 in the same workbook. I would like to trigger a macro based on the name I select in this drop validation drop down list that will fill out an address, telephone number, and email address in the following cells next to my data validation drop down list on Sheet 1: B2, B3, and B4. I want it to be designed so that users will select a name and have that person's corresponding address, telephone number, and email address fill right next to their name on the same sheet.
View 6 Replies View RelatedI have a Data Validation list in cell A1 of a worksheet called LIST. I would like to modify the macro that I have recorded, the macro uses data from various worksheets. I would like to sort out some code so that at certain points in the macro it will select the worksheet that is shown in cell A1 of the LIST sheet and then carry out the code already recorded. THis will allow me to quickly change a sheet name that is refererred to in the macro numerous times without actually manually editing the sheet name in the macro code.
View 7 Replies View Related
