What I am trying to do would appear to be very simple. I am trying to build a quotation form for our sales guys to use. I would like to use a drop down list with the list of products in, which I have created using a list in a second sheet and then using a data validation drop down list.
What I would like to achieve is the sales person selects the product (of a list of only 14) from the list and excel to automatically fill in the two columns to the right with the model no. and also the price.
Would it be possible to use an IF statement as there are only 14 products to choose from? Is there a better way of doing this? I have created the lists of model numbers and prices in the second sheet alongside the product name which the drop down list sources from.
I'm using Excel 2007. I would like to seek some advise on how i may update cells after selecting a month from a drop down list.
i have created a simplified version of what i intend to have. One the 1st tab 'Cash Budget 2009', i have filled up a table with numbers, sorted by months. On the 2nd tab 'Dec09', i would like to create an expense table, to be able to be selected by month. So i have created a drop down list based on the months that are created in the 1st tab.
Upon selection of the month from the drop down list, i would like the cells to display (fetch) the data from the 1st worksheet. It would also be helpful if the name of the 2nd tab can be updated to read as the month that is being selected.
I've created seven names in my data validation source list on Sheet 3 in the following range of cells, A2-A7. My data drop down validation list is located on Sheet 1, A2 in the same workbook. I would like to trigger a macro based on the name I select in this drop validation drop down list that will fill out an address, telephone number, and email address in the following cells next to my data validation drop down list on Sheet 1: B2, B3, and B4. I want it to be designed so that users will select a name and have that person's corresponding address, telephone number, and email address fill right next to their name on the same sheet.
I am working on a spreadsheet that is essentially a question and answer based document .... I need to set up the macros so that if a certain response is chosen from a list, it will automatically update the cell / row next to it with a pre-determined response ....
The way the spreadsheet is set up is that the first column has the question, the second column has the answer (yes, no or N/A - from data validation - as a list) and the third column is blank - but is titled "comment/action" .....
For example: if the question is "have you locked the car" and the answer column selects "NO" then I want the "comments/action" to come back with "you need to lock the car", and if the answer is "YES" then I want the comment/actions column to remain blank ...... The same with N/A ......
I will have around 100 questions in the document ...... I know I need to set up the responses on a separate worksheet - i just dont know what the macro's are to identify and place the appropriate response from the worksheet to the relevant comment/action column .....
I have created a pricing sensitivity for a list of products. In cell C3, users can select a product (i.e. Apple, Elmo, or Bowl) and based on this selection, a range of Prices and Units are then updated and the Revenue for each price point calculated. A few lines beneath this, I have a little summary table that lists all the products. I'd like for users to be able to enter in the optimal price point for each item and then have the Units and Revenue for that selected price point for that specific product automatically update.
For example, if I select Apple from my drop down list my price choices are $5, $10, $15; units are 100, 85, 70; and revenue are $500, $850, and $1,050 respectively. On the summary table, I would like units 85, revenue $850 to update automatically if I select/input a $10 price. This would happen for all the products so at the end I want to be able to calculate a blended revenue mix given my pricing changes.
I have a workbook that has two worksheets. One worksheet is an input worksheet. A user will select a date from a drop-down list and type in the events that occurred on that date in 8 adjacent cells. The user selects a button that advances date and clears form. On sheet 2, whatever was typed into sheet one is saved via VLOOKUP formula. However, if I try to change something retroactively and select a previous date from the drop-down list, it clears everything in sheet 2 that was typed for any selected day.
I'm trying to have a Data Validation list issue where I want to populate a second list based upon the value of the first list.
In this instance I have a Department in the drop down and Employee Name in the second drop down and I want people to only see Employee names if they're allocated to a particular Department. I've been able to do the list using the INDIRECT function, however that only works when there's only a small sample of both names & depts, however I'm looking at populating this document with around 3000 people and over 250 departments, so I would like to be able to use Column J on the Source Tab to populate the details on the Manager Entry tab.
I have attached a sample spreadsheet if I've not explained very clearly.
I want to populate a Data Validation based on values in another cell on another worksheet--but, I want to populate it with the values stored in the cell right next to the cell. http://i32.photobucket.com/albums/d3...n/untitled.jpg. would be an example....
What I want my Data Validation List to do is to look at column B and wherever it sees a certain color--for example, red, I want it to put the corresponding value in column A in the list.
What I would like to do is hide rows 27:30 if the data validation list is equal to "Select Product...". The list is in B27:B30. I've search the forum but couldn't get the codes to work...
I am building an Excel file that will be used to track information and at the core of it all is a list of people from different offices where the number of people per office can change and/or a person leaves the company and is replaced by another. I'll simply:
Column A Column B Office Employee Hamilton Emp 1 Hamilton Emp 2 Hamilton Emp 3 Toronto Emp 4 Toronto Emp 5 Toronto Emp 6 Toronto Emp 7 Toronto Emp 8 Waterloo Emp 9 Waterloo Emp 10
This will be all on Worksheet 'Info'. I have a Worksheet for each Office and named them accordingly. On each worksheet I want to use Data Validation on a column, we will call it 'ChosenOne', set it as 'List' and have the Source pull all the employee names that belong to that office and use them as a selection
ex: Hamilton Worksheet, 'ChosenOne' would show Emp 1, Emp 2, and Emp 3 in the list.
If Emp 3 changed offices to Waterloo 6 months from now I would like to change A4 from Hamilton to Waterloo and the formula would not have to be changed and the next time someone selects 'ChosenOne' it would only show Emp 1 and Emp 2.
Of course this means on the Waterloo Worksheet, 'ChosenOne' would show Emp 3, Emp 9, Emp 10 now.
So basically I am trying to not specify a specific named range for each office and am hoping there is a way to poll information from a Table (or any other tool that can simplify this).
I would be ok with something like:
Column A Column B Office Employee Hamilton Emp 1, Emp2, Emp 3 Toronto Emp 4, Emp 5, Emp 6, Emp 7, Emp 8 Waterloo Emp 9, Emp 10
and just move Emp 3 from B2 to B4 but I don't know if a list can be created from multiple items in a single cell seperated by a , or ; or :.
I want to select a Hyperlinked file.These files are named using Data in ColumnA,B & C. The realtionship between filename and data in columns is; A-B-C.ext. After selecting data A from the dropdown list,i should be able to select corresponding data B and then again another dropdown list for corresponding data C.This should show the desired already hyperlinked file. I want to select the hyperlinked file name by simply selecting all the three data independently.
I'm working on a simple worksheet, it is a tracking sheet for programs taught. What I'm trying to find is a code to insert a row based on a Data Validation List.
Exampl of data:
Column A is for " Name" then futher down Column K is "Program Taught" and Column L is " Date Taught".
Column K is where the Data Validation List is located with a in cell drop down.
What I would like to do is when a user selects a program from Column K a row is inserted with all of the formulas and formats from the previous row, and upon insert would like it to copy Column A into the new row.
This would be so I can keep a historical of programs and dates taught.
And to really spice things up I want to lock Columns K & L of the previous row after the new row is inserted.
I have a list and set cells with a List Data Validation so you can choose them from a drop down menu. What i want to do is when you choose one of the option is the cell next to it come up with other option relating to the previous. E.G. I choose John Smith in cell A1 as a manager and in A2 a list of his team appears.
I have 12 months in a year and each number represent a month. I have generated lists of data mainly interest and principle payments from 12 amortization sheets which i have just copied into the attached spreadsheet and will change accordingly based on the loan terms which doesn concern us. For our purposes we wont make distintion between principle and payment as i just need to see how to make what i need work.
What I need: I need to offset data vertically automatically once i the user selects an option value (Number in this Case) from the validation list located within the Payment control box. Going from left to right you see the raw data but in this example i need the data on the right hand side to be offset down the number of rows which may be found in the control box as a validation list.
IE:
So if i were to use "Loan I" [L6] and select a "2"[J6] from the "Payment Control" then the data on the right hand side [L6[ would reflect a $0 but instead the new value for L7 would be "$24.96" and would continue down for about 374 rows. This will have to be done for Loans I - Loans N [L6:Q6] respectively. This is all i need in order to compile and make use of in my spreadsheets.
Thanks and cannot be a formula as forumlas will be overwritten and cannot be a macro so it must be a module in itself so it an run when the list is changed.
the single digit values in coulmns M6:Q3 are there mainly so you can see the difference between the base and the position at which the data is placed at. its not need but is there to stress and to show the number rows in offset of data.
I have a list in one worksheet which comes from "=SALESMEN!$D:$D" but the list is extremely long with blank values. How can I make the list only show values from column D which are non-blank?
Currently the list goes up to 30, however I want to use all of Column D from the SALESMEN worksheet, that way if I add to it, the names will automatically be added to the list in the other sheet.
Somehow I cannot seem to count data in a column (e.g C) where cells are populated from a data validation list. The same formula works when I manually populate the same data in another reference column (e.g J). I have tried both COUNTIFS and SUMPRODUCT but they dont seem to work
I need a macro which will lock the cells after data is entered in the cell once. Cell should should be only edited after a password is provided. I found the following macro but the problem is that it's not locking the cells where I have Data Validation List :
Private Sub Worksheet_Change(ByVal Target As Range) If Target.Cells.Count > 1 Then Exit Sub If Not Intersect(Target, Range("A1:M10000")) Is Nothing Then 'set your range here ActiveSheet.Unprotect Password:="1234" Target.Locked = True ActiveSheet.Protect Password:="1234" End If End Sub
Attached is example of what I'm trying to do. I want to use the drop-down on the "Master Tab" and have the corresponding price by promo_month appear in the yellow cells.
Currently its on July, but I would like to switch that to August etc and have new prices populate in the yellow cells. Prices come from the "table" tab.
On Sheet2, data validation is applied to cells D21:D70 to limit data to values to a list, which is a named range on another worksheet. There are ranges on two other worksheets with the same data validation rule. The range for the list is ‘Sheet1’!D12:D26 (which is named “Processes”).
On Sheet1, the user enters a list of their processes. Then on Sheet2 (and the other sheets where the data validation is applied), they select one of the processes from the list. This all works fine until they go back to Sheet1 and modify one of the previously entered values.
For example, "Brush Teeth" is entered as one of the processes on Sheet1. It is then selected on Sheet2. Then, the user goes back to Sheet1 and changes the value to "Brush Hair." When you return to Sheet2, the value is still "Brush Teeth." It can be manually be changed by selecting “Brush Hair” from the drop-down list (“Brush Teeth” is no longer available), but it doesn’t automatically update.
Data validation was applied to a single cell (A3) and the list was on the same worksheet (B1:B3).
Option Explicit Private oldValue As String Private Const DVCell As String = "A1" Private Const dataList As String = "B1:B10"
[Code]...
'This is worksheet event code, which means that it needs to be 'placed in the appropriate worksheet code module, not a standard 'code module. To do this, right-click on the sheet tab, select 'the View Code option from the menu, and paste the code in.
On Sheet2 (I assume I need to add this code to every applicable sheet), I tried editing the first part of the code as follows (changes in bold), but when I click on any cell on Sheet2 that has the data validation rule applied, VB returns the error “Run-time error ‘1004’: Method ‘Range” of object ‘_Worksheet’ failed.” If I go into the debugger, the second instance of “If Not Intersect(Target, Range(dataList)) Is Nothing Then” is highlighted.
when you choose Data Validation for a specific cell, you can choose list. Once you have chosen list for "Allow", you can select the source cells for what will be in the drop-down menu. I want to be able to use VBA (or just use Excel) to modify those source cells.
For example:
There will be 3 lists with drop-down menus using Data Validation.
List 1: Choose first option in list -> List 2 uses source A Choose second option in list -> List 2 uses Source B etc...
List 2: Choose first option in list -> List 3 uses source C Choose second option in list -> List 3 uses source D
In cell H5 there is list of dates and in H7 there is codex, based on these two conditions in H11 a data validation list should be populated from the code_sheet using column B. The populated list should be unique entries, as the column B in code_sheet has duplicates.
I have tried to modify the examples here on the site, but can't seem to get it. Cell G1 has list data validation of 5 numbers,6 digits long. In the cells below G10:G500, these numbers are listed. However, in the G10:G500 range the numbers have 8 digits. The first 6 digits remain the same and only the last 2 change. Here is what I would like to see happen: When I chose a number from G1, I would like to highlight all the cells with the first 6 digits matching G1 in the range G10:G500.
I am trying to find something that would allow me to have a spreadsheet clear the contents of a certain cell based on the selection made from a data validation list which resides on the same row. This can best be described with an example.
The user selects anything but " " or "none" from the validation list, which for this example resides in C5, would trigger code to clear the contents, if any, in AA5. If " " or "none" is chosen the value remains.
This capability should be available for each row through 100.
I am trying to create a drop down list that when selected will display data in the 10 rows below and 4 columns, so a total of 40 cells. I would like the data to be based on the selection in the drop down list.
i have 27 different combinations of the above list with up to 10 different rows. I have a label for each one, but i cannot get the rows below my drop down list to display the proper values base don the selection in the drop down list.
I am attempting to use a named range as my Validation data source but have two questions:
1) It seems when you use a named range as a source the user can enter in any data they want in that cell. I really only want the user restricted to the list I give them. If I enter the list manually in the source box then it works but I really want to use a named range
2) My range is fixed to 10 cells and the user can enter in as many variables as they want (up to ten). When a user clicks on one of the cells that the validation is set to read the range the user has to always scroll to get to the top. When selecting the cell Ecel always defaults to the bottom choice in the list. I want to minimize the VBA because Mac users will be using this and VBA seems to be touchy with macs.
I have 2 columns First Name & Surname. What I want to do is create a data validation list on the surname which results in the 2nd data validation list only showing the first names which link to one of the surnames.
i.e. If I selected Smith in the 1st validation list then I would only like to see 'Paul' as an option in the 2nd list
If I have a table as noted below with the following assumptions:
- this table will likely grow - the 'Include' column data will change based on external criteria/formulas, so the 'Include' column will not be sorted. - Macros aren't an option as this sheet needs to be macro free.
A B C 1 Item Calories Include
[Code]...
How do I build a formula that I can place in a data validation drop down to only include 'Item's that have Yes indicated in the 'Include' column?
I've been researching this and found answers if the 'Include' column was sorted via offset, but I haven't found any to sift through when unsorted. I feel like there is a simple answer to this that I am missing. Here is the sheet --> ExampleSheet.xlsx
