I am using the following forumla, it gathers the net sum of a column of $ amounts.
I need to have it changed to gather the Absolute ABS total instead.
=SUMIFS($B$23:$B$500,$A$23:$A$500,">="&$V23,$A$23:$A$500,"<"&EDATE($V23,1))
V23 has a date "Month" value.
Is there a way to absolute reference multiple cells at one time?
View 5 Replies View RelatedI have an Excel workbook with multiple worksheets. One of the worksheets has a live data feed for stock updates. I extract data from the live feed (it's in multiple sentences) and pull it into 6 columns. In another worksheet, I pull those 6 columns into the sheet through the use of Index / Match. That second sheet has additional formulas that essentially analyze the data. As the data refreshes, the existing data moves down the column.
What I didn't think about was the fact that at times, a stock may be listed several times because different brokers are offering updates. Because I used Index / Match, it will look for the first match from the top and display that data in the relevant columns. Unfortunately, some of the data needs to stay with the matching row (and stock ticker) but because of the way I wrote the formulas in Index / Match, it just finds the first matching target and displays that data.
I can correct this by using an absolute reference ($) but I can't find a way to "copy down" formulas using absolute references. I also have one column of cells that contain 1 absolute reference and one relative reference.
I'll re-write this manually if I have to but I have 1,800 cells to change.
i have a column with times of day and need a helper column to show the starting hour. for example, column a1 - 9:53am would like b1 to show 9am or 9. i tried customizing the date format to 'h' only, but when I pivot the table it still shows several 9's
View 2 Replies View RelatedHow to change from absolute references to relative references.
Example :
ws.Range("G" & NextRow).Formula = "=" & Range("H" & NextRow).Address & "+" & ws.Range("I" & NextRow).Address
This code return the absolute references---> =$H$365+$I$365
, and i want change to relative references, like this ---> =H365+I365
Have a query that pulls general ledger data. Named Range SALES defined for Sales Account numbers. What is the best way to always have SALES (which pulls as negative number) converted to absolute values?
I have in my mind that it would be some sort of worksheet change event . . . but I don't really grasp the byval/byref TARGET concept by itself, let alone whether it can work on a named range.
I have a workbook that contains a column, G, which includes a formula that calculates distances (based on lat, long coordinates) to a training site ("TS" going forward) from other sites within the same district as that TS. There are numerous TS's in the company, usually 1 per district (but some districts do not have a training site), and I am trying to find a way to change my distance formula that will automatically detect which site is a TS, and then calculate the distances of those other sites in that same district to their respective TS's.
As it stands, I have to manually change an absolute cell reference every time I encounter one of these TS locations in the file (designated by a "TS" in Col F), and rerun the distance formula down the column. I would hate to have to do this several hundred times.
Attached is a sample file. Again, Col G contains the formula for distance calculation, and you will notice that the absolute cell references change each time a TS is encountered -- I have been doing this manually. Additionally, I would be curious to know if there is a way to spot any Districts that lack a TS, as in District 493, and specify that in Col G.
I need a macro to do this small task for me. Preferably it should execute when I have selected a cell and press a command button. Here's the way it should work:
Copy the cell I have selected
I want to add a formula with absolute row to a cell.
The desired formula in the cell is something like "=SUM(B$5:B11)"
However, when i use the following code I keep getting error 1004 'Application-defined or object-defined error'
Code:
topCell.Cells(CurrentRow, 3)FormulaR1C1 = _
"=SUM(R-" & CurrentRow - 1 & "C[-1]:RC[-1])"
It works when the bracket [] is used for row, but it does not give me absolute row in the formula.
Code:
topCell.Cells(CurrentRow, 3)FormulaR1C1 = _
"=SUM(R[-" & CurrentRow - 1 & "]C[-1]:RC[-1])"
I'm working on my first real macro - so I'm a greenhorn. I've spent a few hours trying to research a solution, but most threads are too technical for me so I'm hoping someone can really help me out.
I am trying to use a formula that references a cell that changes day to day from when I use the macro. I need to use a formula which grabs from a cell in a non concrete location. Let me try and show you what I mean.
From I4:I10, I need a formula like this:
Formula is as follows:
=IF(ISERROR(VLOOKUP($A$4,Day2,2,FALSE))," ",(VLOOKUP($A$4,Day2,2,FALSE)))
However I need the formula to stay the same but the DAYS to change to DAY 3, Day 4, etc as I drag it along..
I have written some VBA code that is functional, but yields a formula that is somewhat confusing to the user.
I have two string variables called TippityTop and Anchor, both of which refer to specific cell addresses in the R1C1 style.
I attempted to define other variables that reference cells that are offset from TippityTop and Anchor without using the ActiveCell route. Try as I might, I could not produce the cell addresses that I wanted these new variables to reference.
I consulted many Excel Help screens and referred to a book on Excel VBA, but I finally took another route.
I now have:
ActiveCell.FormulaR1C1 = _
"=IF(AND(ISNA(MATCH(RC[-2],OFFSET(" & TippityTop & ",1,-2):OFFSET(" & Anchor & ",-2,-2),0)>0),ROUND(RC[-1],2)0),""DOV not in Treasury"","""")"
The problem is that this code yields this formula in Excel:
=IF(AND(ISNA(MATCH(L587,OFFSET($H$585,1,-2):OFFSET($H$798,-2,-2),0)>0),ROUND(M587,2)0),"DOV not in Treasury","")
Rather than OFFSET($H$585,1,-2):OFFSET($H$798,-2,-2), I would like the formula to say F586:F796, so that the end user can easily understand the logic.
I am doing percentages (very simple formula)
The formula looks like this =B7/B5
Now when I drag it to the box below I get =B8/B6
But I need the numerator to increment and
the denominator to stay the same.
So that it would look like this =B8/B5
I have a simple count formula which is suppose to be absolute.
=COUNT($L5:$V5) and works till I add a column via a macro.
Macro adds a new column at column M then inserts data.
My problem is when I check the formula after macro it changes to
=COUNT($M5:$W5) I thought using the $ sign means Don't change?
I have a below formula which extracts the v and number attached to it I would like to copy this across all columns and change row for each column. So for example 1st column reference will be B4, the second column would have a reference B5 and so on, it's probably worth to mention that cells I am referencing to are in other sheet hence why there's Ref! before B4 is this why absolute column and relative row not working?
View 5 Replies View RelatedFor some reason Absolute $ or INDIRECT is not working inside my formula when I add a row to my chart. Formula keeps adjusting.
Here is my formula...=IFERROR(LARGE(IF($B$5:$B$50=$K108,$A$5:$A$50),1),"")
$B$5:$B$50 goes to $B$6:$B$51 AND $A$5:$A$50 goes to $A$6:$A$51..... it can't do that, throws my counts out, needs to stay in this range B5:B50 and A5:A50 when I add a row to chart
Also when I use INDIRECT
=IFERROR(INDIRECT(LARGE(IF("B5:B50"=$K108),INDIRECT("A5:A50"),1),""))))
I keep getting a error with =$K108, which is a cell reference in my formula which the formula needs to look at
So what do I do, or what formula do I need to use to stop this from adjusting as I add rows to a chart to stop formula from adjusting?
I am using this formula to calculate a column of numbers that are both negative and positive numbers. =SUMPRODUCT(--($A$5:$A$9647<=TODAY()),--($A$5:$A$9647>TODAY()-365),$C$5:$C$9647). I need to keep this formula the same where it will calcuate on a rolling 365 day but I need the total to be only the absolute value (abs).
View 2 Replies View RelatedI think this should be easier than I am making it out to be, but the answer is escaping me....
Among other things, I have a workbook with these worksheets in it: Hours, Cost, Profit, Revenue.
Columns A, B, C & D should be exactly the same on each worksheet. So, I have all the data for these columns entered into Hours, and then reference that worksheet on the other ones.
That works fine until I sort it differently and then instead of having row 2 reference row 2, it will be in row 9, etc.
Now I know I can use =+Hours!$A$2 for the absolute reference, but then i would manually have to change the reference on each cell.
SO - (finally the question) Is there a way to use the absolute reference without having to manually enter it into each cell?
I need to calculate the absolute week and have found a formula to do so. Is there a way to embed/execute this in VBA?
TRUNC(((StartDate-DATE(YEAR(StartDate),1,0))+6)/7) where StartDate is the date which you are trying to find the corresponding week number (for example Now().
using a macro im trying to paste in a sum formula, however this will be pasted onto different sheets and the number of records will be different for each so i cannot use absolute locations. the only constant is that all ranges will start in row I9. when it runs the following code
Range("G" & (ActiveCell.Row)).Select
ActiveCell = "Total"
Range("I" & (ActiveCell.Row)).Select
ActiveCell.FormulaR1C1 = "=Sum(I8:R[-1]C)"
Range("J" & (ActiveCell.Row)).Select
ActiveCell.FormulaR1C1 = "=Sum(J8:R[-1]C)"
Range("I:J" & (ActiveCell.Row)).Select
Selection.Copy
Range("I4:J4").PasteSpecial
it fills in =SUM('I8':I13) how can i make it insert it without the ' ' around the I9? and how can i select the two cells? (again, cannot be absolute..)
Need a formula to calculate a absolute total from a column of totals.
I thought this was simple, but the formula I made didn't work.
i am currently using the macro below to import text files into a spreadsheet. Currently, it begins the import in cell A1 which is what I recorded it to do. how do I change the code to begin the import on the active cell?
View 2 Replies View RelatedI have this fairly simple formula which decides whether to shade a cell or not
=AND($X$1<>"TBD",R3<>"None",AC3="Y")
This is set in cell R3 and I want to copy it all the way down the cells in the R column. However, when I copy & paste (and copy and paste using paste special, formatting) the R3 and AC3 cell references do not update to match their relevant rows. eg If I highlight cell R26 the conditonal formatting formula still refers to cell R3 and AC3, not R26 & AC26. I'm using Excel 2010 but I don't recall this happening in 2003.
I am migrating a bookkeepping spreadsheet from Quattro v12 (c2001) to Excel 2007 and have hit a stone wall over relative 3-D references.
In this workbook each sheet holds data for one month, and this includes some lagging-12-month calculations -- that is, summing a range on a single cell for the preceding 12 sheets (including this one).
Unexpectedly, this formula:
=ISUM('201206:201305'!M6)
gives absolute references, even though I put in no dollar signs after the sheet names. This means it gives the wrong answer when copied to the next sheet to start a new month.
I can find no reference at all to converting the above formula from absolute to relative reference.
I am creating a spreadsheet which creates a bulk of data from a front sheet.
The question is:
Is there a way to automatically copy a fixed formula for 100 cells using one fixed cell reference such as $A$1 and then automatically after 100 cells replace $A$1 with $A$2, after another 100 with $A$3 and so on?
Explanation with Example:
For example, Sheet1 contains the words "Green Tree" in Cell A1 and Sheet2 will then place "Green Tree" into 100 different sentences such as:
Plant a Green Tree
Grow a Green Tree today
This would be created with the formula ="Grow a "&'Sheet1'!$A$1& " today"
After 100 different variations using the formula I want to change that formula to reference cell A2 on Sheet1.
I know if I place "Red Tree" in Cell A2 and use the formula ="Grow a "&'Sheet1'!$A$2& " today" I can do this manually using find and replace for the 100 cells, but I want to do this for 100 different variations of Green Tree to create a 10,000 different sentences so I'd need to find and replace 100 times!
Is there a way that formula links in spreadsheets can use environment variables to reference formulas in other spreadsheets/addins?
For example, I have a spreadsheet that imports templates which call functions in an addin. The spreadsheet, templates and the addin could be installed into either the 'Program Files' or the 'Program Files (x86)' folders.
I am experiencing issues with the formula references when moved between 32 and 64 bit computers since Excel seems to store the full path of the addin in the Excel formula (even though it hides it when the reference resolves its path) in my templates. I would like to update the references in my templates so that they use an environment variable (set by my software installer) to always know the correct path of the addin.
In Excel 2003, spreadsheet links are edited via: 'Edit'->'Links'
In Excel 2007 and higher,'Data'->'Edit Links'
I can use help creating the following forumla.
In column "A" I have Dates of Variances. In column "E" I have the variances for those dates.
On another sheet I need variances between certain dates. For example, get all variances between the dates 03/28/09 - 04/28/09.
I have a 11 worksheets in my workbook and 1 of them I'm using as a Index. All the others are for a individual person. Basically, I want to gather all the information from the 10 worksheets (but I want to keep the info on those worksheets) and transfer it all to my Index worksheet.
The thing is, I want to transfer a certain range to my index worksheet, and when I do so, it could automatically number the rows.
Let's say I add information on 3 rows to all of the worksheets and then gather them and insert them in my index worksheet. The next time I add information, I want to select all the information again and write it over the one I inserted before.
Example, I want to transfer range B5:K? (? being the last cell with info in it.) from all my worksheets to the range B5:K? on my index worksheet; writing over the old info on that sheet.
I'm trying to be as clear as I can.
how to get either the absolute row or the absolute column of a cell.
Suppose the active cell is H27.
If we use:
ActiveCell.Address
we will get $H$27
How can we get either $H or $27 only assigned to a variable let it be MyVar.
Please keep in mind that converting the $H$27 to a string and then making string manipulations is not accepted, unless of course it's the only way to go.
Also it would be nice if I get answers on how to get the relative address column/row portions only, too. Like H or 27.
Another tip is that using .Column returns a number, not a letter.
This particular formula is used several times to gather various data points across 3 different sheets named Month-1, Month-2 and Month-3.I gather the data the following 3 formulas then sum it as needed with a helper cell.
=IFERROR(INDEX('Month-1'!$A$1:$G$6000,MATCH(TRUE,INDEX(1/('Month-1'!$A$1:$A$6000=$G$24)*ROW('Month-1'!$A$1:$A$6000)-MATCH($A96,'Month-1'!$B$1:$B$6000,0)>0,),0),MATCH($M$2,'Month-1'!$A$14:$G$14,0)),"")
[code]....