I can pick one of these. If i pick Cash then i want a specific cell to run a specific formula. depending on the item chosen.
So in cell A6 is the list.
in cell B6 an amount will be place and in C6 another amount will be place. the number for c6 will range from a -number to a +number.
But D6 looks to see if B6 meet the requirements for MTT, SnG or Cash depending on which item was selected from the list. and uses the formula below with $c$3 changing from to either $D$3 or $F$3 and comparing the values for the chosen item. the formula changes would look this
=IF(ISBLANK(C6),IF(B6>$C$3,"Do Not Play","PLAY"),IF(C6<B6, "Lost","Win"))
=IF(ISBLANK(C6),IF(B6>$D$3,"Do Not Play","PLAY"),IF(C6<B6, "Lost","Win"))
=IF(ISBLANK(C6),IF(B6>$F$3,"Do Not Play","PLAY"),IF(C6<B6, "Lost","Win"))
I would like to change the greater than number to the value in cell 'I11' in sheet 'Linear Programming Data' and the less than number to the value in cell 'I12' in sheet 'Linear Programming Data'. The code I am using was done by recording a macro since I don't know how to code in vba.
Code: Sub Results2() ' Results2 Macro ' copy table filter power by greater than and less than Sheets("Finalizing Results 2").Select Cells.Select
I have a protected template and unprotected source worksheets - - - what I would like to happen is for the macro to start and if the source worksheet cell B3 equals "Report Total" then stop - otherwise copy template worksheet then copy 6 specific cells from the source to paste values to specific cells on the newly created worksheet (B_ to C7, D_ to I7, E_ to C9, F_ to K9, A_ to C11, M_ to K11 and then K13=F13-30)
After that then start all over again unless the next row’s cell (B4, B5, B6, . . .) is "Report Total" then stop - - - the row count could be from one to a couple hundred.
Here is what I have so far but I know that with each copy the name will change and as it goes down the source file each row will change and I also need help with that.
I'm trying to search through multiple worksheets (that are closed) to see if a value in cell B12 (of every worksheet) matches a value in a seperate worksheet (which is in a seperate workbook)
I have number in cell (A1) = 100. when I enter number in any cell of column(B) for example (B1)=10. then in cell (C1) the result of (A1) - (B1) = (90) and if I add in cell (B2)=10 then in cell (C1) the result of (A1) - (B1+B2) = 80 .accumulatively in cell (C1). and any number in column (B), the result will be (A1) minus any number in column(B) accumulated in (C1)
second question
I have number in cell (A1) = 100. when I enter number at cell (B1) = 10 then the result would be in the adjacent cell (C1) = (A1) - ( B1) = 90 and If I enter a new number in cell (B2) = 10 then the result would be in the adjacent cell (C2) = (A1) - (B1+B2) = 80 and If I enter a new number in cell (B3) = 10 then the result would be in the adjacent cell (C3) = (A1) - (B1+B2+B3) = 70 and so on. I want the result to be add automatically to adjacent cell in column (C)
I would like to be able to put manually a formula in a specific cell (like a "requested date" cell) and then have a table that use this date for the headers and calculate +1 year for each columns.
For exemple:
=2012-01-01 =2013-01-01 =2014-01-01 =2015-01-01
requested date: 2012-01-01
Would you know a way to easily do it? when I try to do it manually (+365) it doesn't consider leap years. I thought about a =DATE formula but the requested date have to be manually entered...
When i entered a code to the cell 'code', it reads the code from the sheet 'Products' and then transfers to the active sheet 'Order' some items.
What i want is: Because the user has to enter the quantity either to the cell 'Pallets' or 'Cases' i want to be locked the empty cell each time and to be used for calculations.
1st Eg. The "45870" Pallets to order : 50 because the user used the pallets the cell "Cases" must be locked and it must calculate the 50 pallets*100 so Cases : 5000
2nd Eg. The "45870" Pallets to order : null Cases : 5000
because the user didnt use any pallets the cell "Pallets" must be locked and it must calculate the 5000 cases/100 so Pallets to order : 50
I'm trying to find vehicle make and model in a cell containing a lot of text and then display that in the formula cell. For example if A1 is a paragraph that contains somewhere within it "Ford" & "Ranger". I want B1 to display "Ford" and C1 to display "Ranger". I have a list of vehicles makes (column A) and models (column B) on a seperate sheet.
I am working on a system where the system is having "australia time". Now, I want a worksheet where it should reflect the India Time after pressing a specific key in a specific cell.
I have a spreadsheet that I am using to track competitor retail pricing The problem is that I have a list of values and I want to be able to show how many of these values are either higher, lower or the same to a specific cell value. However one complexity that I have is that some of the competitors do not have values for all records (i.e. some are blank) and I want to discount these from the counting.
I have data in several cells, and I want to extract only the information in the cell up to a /. For example "joesmith/shipping" I would like to have only joesmith in the cell next to it.
I was wondering if there is a formula that will search a cell for a word or other specific criteria then if it finds it, puts the requested data / word in the formula cell
Example:
If I have a list of vehicle descriptions all in different formats:
CAR1 1.4 SRI 3 door Hatch CAR2 5 door saloon GSI 2.0 V8 2.2 CDX 5 door CAR3 Estate CAR3 Estate 5 Door CDX
Say I want to know which ones are CDX varient I need the formula to look in the cell and return "CDX" or "YES"
I am looking for a formula that will enable me to determine which one out of five thresholds a percentage falls within and the retuns a specific value for the corresponding threshold. Here is an example of the data (only showing three thresholds):
Where the values in A1 and B1 are the low and high ends of one range. I would like the formula to determine which range the value falls within and return the value in collumn C (C1 for the A1:B1 range).
I can do this using multiple 'if' statements, but am looking for a much more streamlined way to determine the proper value in column C.
I am looking for a formula which will allow me to return a value, 1 or True, if any of a number of words or phrases in a list exists in a specific cell. Per the below example, any formula which will achieve the result in column A
For Example:
Sheet 1 Column A Apples Oranges Banana Fruit Salad Fruit Smoothie
I paste new data into a sheet of a monthly report I prepare. For this sheet, the # of data rows change (and is unpredictable) every month. I need the value inside a specific cell that dynamcially moves up and down based on the # of rows for that month (because it's below the rows of data).
So I made a formula to identify the exact cell # every month.
Example:
This month the exact cell is F255 in the "Refi" sheet.
So my formula in the "Summary" sheet cell A1 first finds the cell row # only (255) and since it's always column F, in B1 I have
VB: ="F" & (A1)
This outputs "F255" in B1, successfully identifying the target cell.
Now how do I write a formula in C1 to grab the value from whatever cell is named in B1. (For this month, the value in cell F255 from the "Refi" sheet)
formula that can automatically use the current month date to extract information from other cells on my spreadsheet.
For example: This formula should be located in cell C6. Cells D6, F6, H6, J6, L6, N6, P6, R6, T6, V6, X6, and Z6 (these cells correspond to the months of the year, January to December respectively) contain the values I need. The month names are labeled above in row five.
Let's say the current month is March, I need the formula in C6 to automatically know that it is the month of March and to pull the information from cell H6 (which is the March cell). Then when April comes along, it will know that it is April and to only pull the information from cell J6; and so on until the end of the year.
if a cell contains character A THEN multiply by cell B * 0.02,if a cell contains character B THEN multiply by cell B * 0.05,if a cell contains character C THEN multiply by cell B * 0.010
See attached worksheet for reference. Is it possible (while utilizing the same spreadsheet on a weekly basis) to zero a spreadsheet subsequent to its use. Importantly however, all relevant formulas must remain perfectly intact and will re-establish themselves once relevant data is placed inside an individual cell? In this case, as soon as a “Name” (or even a letter) is referenced inside the “Name” column: H10:H19?
In other words, the entire sheet is blank bar the top date and respective headings. Once any text is placed inside cells H10:H19, the formulas from the associated Row re-applies itself to the “Week-Start” dates, “Week-End” dates and references a default “Phone” amount for ‘$10’? The Data Validation formulas I’m sure would remain undamaged? This would prevent ‘text clutter’ (such as dates extending to the bottom with no apparent referencing or connecting information?
I have a sheet with a country in it in A1 (validation list).
Depending on the country in A1 a country specific IF command has to be executed on a column1 with first cel = A3. This IF command also relies on the values in column 2 and 3 on the same row. (B3 and C3 are in the IF cmd)
I taught to do it like this : =IF($A$1="Spain";$A$5;0) with A5 being the country specific IF command which should be executed when spain is selected. however when I do this, this only works for the first cell ( I cannot drag this formule down, since it will always give the value calculated in column 2 and 3 on row1.
I'm not sure if the best way to 'select' the country specific IF cmd is with another IF command..
B17 is a keyword to be found in the Product_Keywords range
I'd like to modify it so that:
ifthe cell in the range Product_Keywords also includes "," thendivide the sumproduct by the number of commas+1
Presumably I could add --(ISNUMBER(SEARCH(",",Product_Keywords) as one of the conditions, but how would I keep track of the number of commas in the cell?
I have a code and I want to run this macro whan a specific cell change (which has sum formula) and this code also has some calculation. And I m not understanding to overcome this problem through Calculate event.
I am trying to run a macro once a particular word shows up in the combo box. now in my chase i could try to use VBA code to run the macros such that once the arrow is used in the combobox to select a certain word a particular macro labled the same name as the word chosen would run.
I can assign a number of copies to print by adjusting ActiveWindow.SelectedSheets.PrintOut Copies:= , but what I want it to have the number of copies auto adjust to the value of a cell that contains a formula. I was hoping it would something as simple as Copies:=cell but no luck...
Here is what i am trying to achieve. If the date 2/20/2010 is located at F53 & the cell next to it at H53 is populated with a number between 1 & 16, then i want the cell at J11 (42 rows further up) to auto populate with the number 1. When this occurs the cells beneath this, from J12 to J52 should also auto populate with the with consecutive numbers from 2 to 42. Would also like to see the cells with numbers 1 to 28, automatically format to orange & the cells containing numbers 29 to 42 automatically format to yellow. I plan to have this condition repeat several times later in the year, at dates that are to be decided. When these dates are decided i want to be able to enter a number from 1 to 16 & next to the date & all of the above automatically occurs.
I have a worksheet that contains two basic columns of data, A and B. What I would like to do is based on the value in column A, I would like to copy the contents of column B to a textfile (preserving the basic line structure and hopefully without any extra characters like quotation marks attached). So for all the values in column A = 'Account', Id like to take all the corresponding values in Column E (for example) and save them to the same file, preferably where the filename itself as 'Account.xyz'. And I would like to do this for all unique values in Column A, that is do it for 'Account' and 'AccountPrivilege' etc. Note Column A is essentially presorted alphabetically already. There are actually 1000s of rows with hundreds of unique A values so Id like to find a way to automate this process.
I got Excel for Mac 2011 installed. I have a table called 'Raw" that holds data from the beginning until the end of 2013 (in total ~7000 rows). I have columns for Category, Start and End time, and time period in Hours, Minutes, and Seconds:
I'm trying to get an overview of how much time I've spent in January on Transportation. I would need to look at the Category entries for Transportation, then only use the ones which have the Start set to 2013/01, and then take the Hours/Minutes/Seconds, and summarise it in a new table called 'Data':
Code: A B C D E F
Month Category Occurrence Hours Minutes Seconds
2013/01 Transportation 48
[Code] .......
I have figured out a way to count the occurrences for Transportation for January:
