way to get a formula result to freeze or remain unchanged AFTER a certain time?
I tried using a macro which runs when the file is opened and does a crude 'copy/paste values' operation and replaces the Formula results with their values, but its is not very 'nice'!
I need a table to change a pattern of values but not in the past, but still to remember what that value was....!
I am attempting to pick up a date with time entry on a worksheet and place it into a TextBox on a UserForm. Format on the sheet is mm/dd/yyyy h:mm AM/PM. The UserForm is placing the value as mm/dd/yyyy 12:00 AM. here is the
Private Sub UserForm_Initialize()
If Not Range("dDate").Value = "" Then
TextBox2.Value = Range("dDate").Value
TextBox2.Text = Format(DateValue(TextBox2.Text), "mm/dd/yy h:mm AM/PM")
Else
TextBox2.Value = ""
TextBox2.SetFocus
End If
End Sub
"dDate" is the named range where the date is sitting. The format is also set on the TextBox2 exit event. Can anyone see why only the date portion is being transfered with the default 12:00 AM for no time component of the value?
Instead of calculating a time difference manually I want to have a formula do it for me. What I want to achieve goes as followed:
08/06/2006 04:33
12/06/2006 01:05
Time difference is 92:32 [hh:mm]
another example:
09/06/2006 12:42
12/06/2006 11:35
Time difference is 70:53 [hh:mm]
So instead of getting 92:32 and 70:53 by calculating it myself I would like to have a formula do it for me. Otherwise I'll have to invest a lot of time to get the information I need.
I am wanting to calculate the the processing time for an order that takes place within normal business hours and workweek. A normal day is from 8:00 to 5:00 If a task is started at 2:00 PM Monday and finished at 10:00 AM Tuesday then the result should be 5 hours as I do not want to include any time outside of normal hours. I can figure out how to subtract dates and times but not how to bridge a day(s). My data is somewhat flexible as I have not started the project yet. I can use separate cells for the times and dates or have two cells that use both incorporate the date and time (8/27/09 2:00 PM) for start and end time or any other idea.
View 6 Replies View RelatedI need to fixed width-text to column macro and found a reply in the forum.
However, when I apply the macro, the result of zeros in front of figures disappear since the format of value in splitted column doesn't predefined as text
e.g. sample text to split to column:
000122042009ABCDEFG00567
Required result:
0001|22042009|ABCDEFG|00567
when running below macro; result shows:
1|22042009|ABCDEFG|567
(Beginning zeros figures of the first and last column disappear)
Applied Macro:
I’m trying to resolve this issue and would appreciate some help.
Scenario
I have a tracking sheet that tracks development of work to be completed by individuals.
I have a due date column that shows when the work should be completed.
Once the work has been completed, the user enters his completion date.
I have a formula that provides an overdue warning (Completion date – today’s date) and some conditional formatting.
Problem
When I copy the formula through all the cells in the column I get a number (example 39504) and this changes everyday.
How can I eliminate this being shown as it throws out my average development day calculation?
I have a sheet with a number of different columns, is there a way that when data is input into a cell in the first column that it time stamps the last column on the same row, and this time stamp is fixed. Then when data is input into the cell below the same thing happens, so i can have a time stamp for each entry.
View 9 Replies View RelatedI'm trying to make a summary page that will provide a monthly report based on the data in a second sheet.
I have attached an example with dummy data.
I know this could be easily done with a pivot table but the page format has to remain static and reflect current practises.
At the moment I can only return data from the whole range - not just the desired month.
Fruit Example.xlsx‎
I've written a Function which will count the number of files in a folder which the modified date equals a fixed date
For example, here, I want the file count which modified date = 01.01.2014
Code:
Function FileCountDate(Path As String, FileType As String) As Long
Dim strTemp As String
Dim lngCount As Long
Application.Volatile
strTemp = Dir(Path & FileType)
Do While strTemp ""
[Code] ......
However I got a #VALUE! error message with this formula:
=FileCountDate("C:Usersjohn.doeDesktopTEST","*")
In the TEST folder there are 4 pdf files so it should return the value of 4.
i would like to use the formula "now()" to establish a date in a document. is it possible to lock this date to the initial date? (so when the document is created the date won't change the next day)
View 2 Replies View RelatedI have the following macro that runs every time the system clock's second changes to 07 seconds. I however want it to stop running at 09:47 am. I have the code to stop the timer also (given below) but I am unable to stop the loop at 09:47 am. How do I do that?
VB:
Sub Timer()With Workbooks("book3.xlsm").Sheets("Sheet1")
Range("B10:E10").ClearContents
End With
Application.OnTime DateAdd("n", 1, CDate(Left(Now, Len(Now) - 2) & "07")), "Timer"
End Sub
[Code] .....
I have a larger data file (120,000+ rows). Each row has one column for date and another for time. Basically, I need to add 6 hours to all time entries, but also change the date accordingly.
View 2 Replies View RelatedIm trying to get the date filtered from a fixed date until Today(), but Im struggling to incorp it into the vba code....
View 9 Replies View RelatedWhen I drag my VLOOKUP formula down a column in Excel 2010, the return value copies the formula result from the original VLOOKUP formula result. For example, if the first VLOOKUP returns a value of 0.5, I expect to see 0.5 or 1 in the cell below that one. However, I get 0.5 which is not the expected result for the cell below.
When, I click the fx on the cells below, the expected return values appear in the formula result. After I click OK, the expected formula results updates and now appears in the cell.
I'm not sure what is causing this issue. My computer was updated recently from an old machine to a new one. I have never experienced this issue before.
i have messed up column A which has only dates and i have different date formats like 03/07/2013 and 07/03/2013 i need to have a fixed date for all in B like 03 July 2013
View 2 Replies View RelatedIm wanting to calculate then no of days between 2 dates. The first one is variable.
Date 1: (Contract start date) Either the date entered in a cell A1, or 01/04/2008 - whichever is later
Date 2: (Contract end date) Date entered in cell A2.
example 1:
Date 1 = 1/1/8
Date 2 = 31/12/8
In the above example i would want the calculation to work out the n o. of working days between 1/4/8 and 31/12/8
example 2:
Date 1 = 1/5/8
Date 2 = 31/12/8
In the above example i would want the calculation to work out the n o. of working days between 1/5/8 and 31/12/8
This will allow me to calculate the number of contract days in this financial year, even if date 1 was in last financial year.
As mentioned below , in excel sheethow to add and subtract time value and get result in time format. As given in below sheet, suppose i want to calculate each day stoppage duration and finally total stoppge duration. Kindly let me know the farmula or function for the same with example. I'm using excel 2003.
STOPSTARTDURATION
10:4512:151:30
0:201:301:10
5:5012:256:35
19:3020:301:00
16:0517:051:00
15:5017:151:25
23:500:000:10
0:001:001:00
23:300:000:30
0:001:001:00
17:2018:301:10
3:504:501:00
I created a simple auto numbering function whereby Cell A7 contained =Row()-6, and Cell A8 contained =(A7+1). I then shift, and pasted the contents of cell A8 until cell A600. My aim is to simply copy the increments of 1 - 600 into another column. However when i copy and paste i'm also copying the initial underlying formula ie: =( A?+1), Is there a way to copy the results, not the formula?
View 2 Replies View RelatedCell C2 has the date - "3/03/2014"
Cell F2 has the time - "12:43 AM"
I have combined these in cell O2 - "3/03/14 0:43"
In another sheet 'ref' I have the days split in to two shifts (two 12 hour shifts - from 6am to 6pm (L2), and 6pm to 6am (M2), and the shift that the date falls on is in N2.
So if C2 = "3/03/2014" & F2 = "12:43 AM", it falls between 2/03/2014 6pm and 3/03/2014 6am, then I want to return the third columns value (which shift it is) in the ref sheet. I think this requires Vlookup.
I have a centralized document that myself and my co-workers use. I would like to insert a date formula that upon opening the "Main" document displays the current date (that is no problem). The catch is, when myself or my co-workers make a change to that document, and "save as" I would like that date to stick (no longer display the current date, but the date in which it was "saved as").
View 12 Replies View RelatedI have an excel sheet which connects to an SQL database, one of the colums (A) is the date & time for a particular event. I would like to calculate in another cell the difference between the current date and time and the date & time in column A in minutes.
View 3 Replies View RelatedDoes anyone have a formula (or formulae) for working out the following:
Don't hesitate to ask me more details, or contact me on MSN...
I have a worksheet with one column showing date and time, in HH:MM (North American Format) and a second column showing temperature readings taken every 15 minutes.
What I am trying to calculate is the total amount of time (in HH:MM) that the temperature was equal to or below a certain threshold.
I have seen some formulaes for calculating elapsed time, but nothing which can account for this variable.
For instance I have a formula such as =sum(A1:A9). But imagine that the range is not always till row 9 but depends on the total number of rows that are in the table. How can I change that 9 so that it takes a number equal to the total rows in the table?
The final formula I want is not that simple one. It is actually
=INDEX($F$1:$F$1047,MATCH(1,INDEX(($G$1:$G$1047=G2)*($L$1:$L$1047<>"47200")*($L$1:$L$1047<>"47700"),0),0)).
I want to change 1047 by the relevant number of rows. Also, I do know how to do it in VBA, but I have a problem with the length of the formula there (not that one, but other bigger than that)
I am creating a formula that matches a particular date with a particular time. All of the dates that have 14:00 (2:00 PM) next to them should be listed from oldest date to newest date. The workbook where the formula needs to be entered contains data that is constantly shifting and updating so the formula has to be based upon the 14:00 (2:00 PM) and not the number of rows because the 14:00 (2:00 PM) row won't always be in the same place.
See the attached spreadsheet for a better explanation. There are two examples of what I need on one sheet to give an example of how the data can shift. Also, the weekend is not included in the data so the dates skip days during that period.
Is there a formula that can be used to combine a date and a time that will be formatted correctly?
For example if I have the following values:
A1: 08/03/12 (Date)
A2: 16:45:39 (Time)
And then I want A3 to be 08/03/12 16:45:39 as the Date/Time. Can this be done with a formula?
I'm trying to autofill "vertically" in a spreadsheet using a formula which loads value from a different sheet.
Lets say I have cell (A1 for example) ='2013'!A39
Now I want to fill A2-A30 in a way that the formula updates to ='2013'!B39, ='2013'!C39, ='2013'!D39...and so on
I've tried using ='2013'!A$39, but this only copies the formula as it is. When I try to autofill cell A2-A30, the formula still is ='2013!A$39
Is this possible to do?
1.The attached file shows an example extract of a data extract that has thousands of lines. See the Data Tab.
2.What I need is some time that has passed between two dates in a DDHHMM format
3.What I then need is the top 50 of each of the times (or the longest time past)
4.The column headers will be: WO Number | Contractor Name | Time Calculation – see the various Report tabs
5.The calculations in the Data tab are between the following columns.
a.Difference between Column Z and Column AC
b.Difference between Column AC and Column AD
c.Difference between Column AD and Column AE
d.Difference between Column AE and Column AF
6.Is it possible to show the top 50 only in time?
This report is forming a part of a larger report and all other formulas are already present so I am hoping to keep the file size quite small. The aim is to then hand this over to someone else to just print on a monthly basis depending on the data that gets added with minimum input.
I have been asked to make some ammendements to a workbook currently in use.
I have to calculate elapsed time, and my formula is giving me odd results. I have a start time (cell B5), and an end time (cell F5). The formula being used was =IF(F5>0,((F5-B5)*24)) which gave the correct result. The cell is formatted as general. It didn't alot for the situation where the end time has not happened yet.
I changed the formula to =IF(F5>0,((F5-B5)*24),(K5-B5)*24) where cell K5 is the current time. The results are coming out with 6 - 9 decimal places. It makes no sense as I've tried setting the times to be exactly 24 or 48 hours to the minute. I've also tried replacing K5 in the formula to now(),
what type of vba code I could use to populate a static date and time that I could plug into a formula. Basically what I need is:
IF A1<>"" then L1 shows the date and time of the entry. If A1="" then L1 remains blank. I don't want the date to change once it has been entered.
I am having a hard time with this formula. How can I adjust my formula so that everything that falls outside the boundries of my given date range will have the word "DELETE" next to it? Here is what I have and it is not working....
View 9 Replies View Related
