I have two columns containing numbers and have done a vlookup to see if the values exist in each column. Now I need a formula to return the numbers that were NOT found using the vlookup function.
View 11 Replies
I have an excel sheet with multiple columns. In one column I have X's and in another I have a limit. I need to look down the stuff column, find every X, match each X to its corresponding limit and then compare all the limits and return only the smallest limit found. I.e if I was looking down the stuff column I would find 4,6,8,8,3 and thus I would return 3 as my value. I am very new to working with excel formulas,
limit
something
stuff
4
x
[Code]....
I am trying to use a formula similar to VLOOKUP() to look in a table for two values and if both values are found, return another value.
Sheet2 is an example of my output file, sheet one is a generated file. i would like the vlookup formula in sheet 2 cell D2 and down to be something like this,
=VLOOKUP(A2,Sheet1!A:K,10)
But I would like to lookup A2 and B2, and the row that contains both values, return the value in the J column
Hopefully you will be able to help again. Is it possible to do a vlookup that references data on other tabs within the worksheet so that the result of the formula is in the cell not the formula.
So if my vlookup was =vlookup(a2,$a$1:$b$12,3,0) and the result was john smith i want just john smith in the cell. I know about copy and paste values but i was looking for a more automatic way. One that doesn't need intervention.
code that would generate the 'Not Found' message
I have a date in HC4, which appears in column 112, so cannot understand why it finds nothing ?
Sub Macro6()
Dim C1 As Range
Application.Goto Reference:="CURRENT"
Selection.Copy
Set C1 = Range(Cells(4, 8), Cells(4, 200)).Find(Range("HC4").Value)
If Not C1 Is Nothing Then
C1.Offset(1, 0).PasteSpecial Paste:=xlPasteValues
Else
MsgBox "Not found"
End If
Range("A1").Select
End Sub
I have a problem where I am linking data from two worksheets say: worksheet 1: A1 = 10, A2 = 20 worksheet 2: A1 = =Sheet1!A1, A2 = =Sheet1!A2
I have filled this formula through a certain number of cells on sheet 2 so that if i add more data to sheet1 it will appear in the appropriate place on sheet2. Is it possible to show the formula results in the formula bar, i.e. sheet2: A1=10, A2=20, such that i can used 'Find' or 'Autofilter' on the cell values rather than the formula?
I encountered problem for some excel files when typing a formula but
displayed a formula instead of its calculated values, e.g.
when I entered "=100 + 100", what I exepected is to display as "200", but it
was displayed as "=100 + 100" instead.
I have a column that contains Gender values ( M or F). How do I create a formula that first counts the number of M or F then tells me the ratio of M to F?
View 6 Replies View RelatedThe below code works fine except when there is no recorset found then i want to display 0 in the cell but its not doing it. The code just leaves it blank if no recordset found.
[Code].....
I need it to display the message if findstring has been found more than once (i.e Twice)
View 6 Replies View RelatedI've got a workbook with a sheet for every month containing clients serviced in the specific month. I've found thread to complie a search box, which is great, but it gives me the value of the search. I need the search to take me to the sheet where the adress of the result is. Please see below the code for the search box i used.
Private Sub CommandButton1_Click()
Dim ws As Worksheet
Dim cl As Range, rng As Range
For Each ws In ActiveWorkbook.Worksheets
Set rng = ws.UsedRange
With rng
Set cl = .Find(Me.TextBox1.Value, LookIn:=xlValues)
If Not cl Is Nothing Then
Label1().Caption = (cl.Offset.Value)
End If
End With
Next ws
End Sub
display workbook not found in Array set without Filepath, As for workbooks found we can use Dir function, but it is not work for workbook not found. The Dir() will return Blank.
e.g. in my filepath only has Book1.xlsx.
[Code] ....
MsgBox CountFound = 1
MsgBox CountNotFound = 3
MsgBox FileFound = Book1.xlsx
MsgBox FileNotFound = Blank
I have at the top of a table the titles and then 3 rows under it. the titles are text..whereas the rows filled with number.
What i want in a cell is to display the text(of the title) of a corresponding value in the same column!..[simply 'look for a specific number in a table,and display the title of that column).. i input all info but returns #value error!does it not work with text?
In range B4:M4 some cells contain values and some are blank. I am trying to write a formula that will omit the blank values and just give me the nonblank values. The code below returns the FIRST nonblank value, but I can't seem to figure out how to drag it across a row to get the others. I want to ensure that the numbers stay in the same order (so no largest/smallest formulas), but the blank cell values need to be removed.
This would then need to be repeated for (B5:M5, B6:M6, ETC).
[Code] .....
I'm using VLOOKUP to search for results in another worksheet. What I need is 0 returned if the search fails. Currently I'm getting #N/A and that's causing my other formulas to fail.
View 8 Replies View RelatedWhen an exact match to the lookup value is not found, the function goes to the highest value that is less than the lookup value.
What do I do if I want to return the closest value, but not less than the lookup value?
For exampe, in my screenshot, if my lookup value is 6 horsepower, I want to return the efficiency for the next highest value (if no exact match) for 7.5 HP. Function would return 89.5
VLOOKUP.jpg
How do I re write this formula to incorporate iserror function to show "" when a value of false or N/A is found.
=IF(K8<>"",VLOOKUP(F8,'My Sheet'!$F$2:$I$489,4,FALSE))
This formula works perfectly except when worksheet 2 has a code that is not on worksheet 1, then I get the error #N/A. I understand why I get the error, but not how to fix it. Obviously some sort of nesting - but what and how?
What I want on worksheet 2, column I - if there is a code on worksheet 2 but not on worksheet 1 - a return of "N/A"...
I'm trying to use vlookup to return multiple values for the same unique identifier. I've read a couple of examples within the forums, but I haven't been able to find anything I understand. I have employee ID's and these ID's have specific access associated with their ID's and each access is listed within a different row. Within a new spreadsheet I removed all duplicates of the employee ID so now I no longer have a one to one match between spreadsheets, so I would like to create a vlookup that will list all access associated with each employee ID. I have attached a sample of the data sheet I am working with.
View 5 Replies View RelatedHow to get correct value using vlookup formula in duplicate look up values.
Here i mentioned a eg;
VlookUp_DuplicateValue.JPG
=IF(G88="PT",VLOOKUP(B88,Vlookup1!A:R,5),IF(G88="OT",VLOOKUP(B88,Vlookup1!A:R,6),IF(G88="ST",VLOOKUP (B88,Vlookup1!A:R,7),FALSE)))
Two tabs in an excel spreadsheet. One with this formula and another one named Vlookup1 with the info (three columns indicating diagnosis codes for PT (Physical Therapy), OT (Occupational Therapy) and ST (Speech Therapy). Out of approximately 350 rows, this formula works perfectly fine with all but three customers’ names. It seems to be only with the last three customers –sorted alphabetically– and can’t figure out how to solve it. Have reduced the amount of rows in the info tab / have changed the format of all cells for these 3 customers / have retyped all information under another row and inserted above all the conflict rows but it always brings “0” as the cell value – not even False….
DETERMINING ROW NUMBER FOR DATA FOUND WITH VLOOKUP IN VBA
I have a user form with a combobox (called STKCODE) that calls up a vlookup routine to search for this item in a named range on a worksheet and retrieve related data to display on the userform. All this works fine.
What I would like to know is how to easily determine the row number on the worksheet, representing the row the data is stored in, if thats at all possible....
I have a vlookup formula: =VLOOKUP(TRIM(C101),Sheet2!$A$1:$B$500,(2), FALSE)
It is not working with General number values. Why is this? Is there something I should add?
The formula works if I swap columns to one with text or if I include text in the column.
Example:....
i m wanting Cell B1 to display true if any of the values in column C match otherwise I want to display false.
A 1
B 0
C 0
D 0
But I can't determine how to get this done.
When I use VLOOKUP formula within a VBA routine ex:
For LoopCounter = 1 to LastRow
With Worksheets("0MATERIAL")
.Cells(RowCounter, 5).FormulaR1C1 = "VLOOKUP(RC[-2],'0MAT_UNIT'!R1C1:R65520C12,4,FALSE)"
End With
RowCounter = RowCounter + 1
Next LoopCounter
How can I find out what row or cell address that the VLOOKUP found the data? The above code works perfectly but the problem is I need data from that same row in columns 4-11. I replicated the .Cells line above and made each one a VLOOKUP (for column 4, 5, 6, etc...) but this kills the performance. I have around 32,000 rows in sheet 0MATERIAL and around 50,000 rows within sheet 0MAT_UNIT
I'm currently using an IFERROR, VLOOKUP formula to display an availability date for a product.
Atm, it reads some like this
I have a problem with finding the value in column B that is found within a range eg: <=1 & >=5 and return the corresponding values found in column A. kindly refer to the attached sample for reference.
View 2 Replies View RelatedI have the following code with uses a cell color to count the number of cells in a range with the same cell color:
Function CountColor (rng As Range, color as Range) As Long
Dim c as Range
Application.Volatile
For Each c In rng
If c.Interior.ColorIndex=color.Interior.ColorIndex Then
CountColor = CountColor +1
End If
Next
End Function
What I would like is instead of just counting and returning the number of cells of the same color, is for the code to return the sum of the values in the cells of the same colors. Cells being evaluated contain numbers from 1 to 300.
I have a workbook with a sheet for every month. I have a searchbox searching for a client and jumping to that location. The problem I am having is that it takes me to the last occurence in the workbook if there is more that one client with the search criteria. Do you have any suggestions for a searchbox that whould take me to the first occurence and give me an option to go to the next occurence in the workbook. Please see the code below that I am using currently using.
Private Sub CommandButton1_Click()
Dim ws As Worksheet
Dim cl As Range, rng As Range
For Each ws In ActiveWorkbook.Worksheets
Set rng = ws.UsedRange
With rng
Set cl = .Find(Me.TextBox1.Value, LookIn:=xlValues)
If Not cl Is Nothing Then
Application.Goto cl
Else
I have two worksheets. Worksheet One and Worksheet Two. In Worksheet One Column A is a list of numbers. I want to look for all of those numbers in Worksheet 2 Column A. Any of the numbers in Worksheet One Column A that are not found in Workseeht 2 Column A I want to list in Worksheet One Column B. I do not want to compare cell to cell but if any number in the first column is found in any position in the second column.
View 3 Replies View Related
