I encountered problem for some excel files when typing a formula but
displayed a formula instead of its calculated values, e.g.
when I entered "=100 + 100", what I exepected is to display as "200", but it
was displayed as "=100 + 100" instead.
I have a problem where I am linking data from two worksheets say: worksheet 1: A1 = 10, A2 = 20 worksheet 2: A1 = =Sheet1!A1, A2 = =Sheet1!A2
I have filled this formula through a certain number of cells on sheet 2 so that if i add more data to sheet1 it will appear in the appropriate place on sheet2. Is it possible to show the formula results in the formula bar, i.e. sheet2: A1=10, A2=20, such that i can used 'Find' or 'Autofilter' on the cell values rather than the formula?
I have a column that contains Gender values ( M or F). How do I create a formula that first counts the number of M or F then tells me the ratio of M to F?
View 6 Replies View RelatedI have two columns containing numbers and have done a vlookup to see if the values exist in each column. Now I need a formula to return the numbers that were NOT found using the vlookup function.
View 11 Replies View RelatedIn range B4:M4 some cells contain values and some are blank. I am trying to write a formula that will omit the blank values and just give me the nonblank values. The code below returns the FIRST nonblank value, but I can't seem to figure out how to drag it across a row to get the others. I want to ensure that the numbers stay in the same order (so no largest/smallest formulas), but the blank cell values need to be removed.
This would then need to be repeated for (B5:M5, B6:M6, ETC).
[Code] .....
To get cell to display results of formula I must edit (F2) and hit enter. Is there an easy way to do this in bulk rather than editing and hitting enter on hundreds of cells?
Example of formula:
=IF(COUNTBLANK(K2)=1,"",CONCATENATE("*** ",K1,": ",K2," "))
I have attached a spreadsheet that is causing me difficulty. I currently have a formula that is displaying in V3 the highest grade when it looks up the data in A3,H3 & O3. Then this is repeated for W3 when the data is looked up in B3, I3 & P3 etc etc... BUT
I need the formula to work if only block one is complete i.e. (1 Explore grade, 1 Plan Grade, 1 Make Grade etc).(please see the example to understand what is meant by a block)
The current formulae will only display a grade if all cells are complete i.e., A3,H3 & O3.
So I am looking for the formula to:
If A3 has a grade in it I wish V3 to display it because its the only grade. (even if H3 & O3 are blank)
As and when H3 has a grade filled in I want the formula to select the highest and display it in V3 (again even if O3 is blank)
As and when A3, H3 & O3 has a grade in it I wish the formula to lookup and display the highest in V3
Ans this repeated for all different areas, Explore, Plan, Make etc.
example doc with formula.xlsx
The situation is that I have 3 interest income from 3 different companies. Column B acts as a helper column to determine if a partner receives just one interest income or receives multiple interest income. If they receive multiple interest income, I want column B to display a 1 and if not make it blank. If you notice partners 5, 9, and 16 contain two or more interest incomes (Columns C - E). All the cells are have either an amount (positive or negative) or a zero. There are no blank cells. Columns (F - H) contains the interest income amount if only that partner receives just one interest income. So for those partners they should not display any of their amounts. The reason is because I am using a word template and currently have to use multiple templates ( 3 in total) to display correctly for each partner. I got this to work with a word macro that will collapse all non blank columns in a particular table. This might be on a ongoing project for me as I do have more logic to solve.
Excel 2010
A
B
C
[Code]....
Can I have a formula in A1 cell to display the No. of cells in selection (in a range) any where in the sheet. Just the No. in A1 cell is sufficient
View 4 Replies View RelatedExample:....
i m wanting Cell B1 to display true if any of the values in column C match otherwise I want to display false.
A 1
B 0
C 0
D 0
But I can't determine how to get this done.
How can I FILTER a range and display the unique items, one below the other, WITHOUT blank cells - with only a FORMULA. What I came up with is shown in the attached WB. I would like to present the countries like in C11:C15.
View 5 Replies View RelatedI am trying to write a formula where the column header of the row in which a value other than 0 exists, will display for each instance (row) where a value exists in an array spanning 3 columns. So the result cell could be any of the three column headers, or a combination thereof.
I started the formula in P2 of the GL Detail-2012 tab. File attached.
Here is what I started: =INDEX($M$1:$O$1,SUMPRODUCT(COUNTIF($M$2:$O$67756,))). Not working.
I want to apply a simple formula to a number of cells in an existing workbook that already contain values E.g.
My column contains the values
5200
1600
4376
in separate cells
I want to divide each value by 1.2 - without having to change every individual cell - can it be done?
I am working on a template for a team that requires me to create a format to be able to be paste on a PowerPoint presentation. The format for the PPT has been created by the board directors and need to stay that way. What I am trying to do is have the team members to populate one form that will feed different spreadsheets, but I am facing the issue that I need a formula or macro that will pull only the cells with values from column D to other table to column Q, in the next print screen you can see what my final goal is...
[URL] ...........
I have three columns of data. I want to give the average sales per person per year but I don't know how to combine two columns in the formula.
ManagerYearSales
Sarah2006200
Sally2006150
Stuart20063000
Steve20064000
Sarah2005100
Sally2005120
Stuart20054500
Steve20055000
I want the output to be something like:
Average Sales Per Year
20052006
Sarahxxxxxxxx
Sallyxxxxxxxx
Stuartxxxxxxxx
Stevexxxxxxxx
For example, I want to give 2006 sales for Sarah.
I know that I could add an extra column to my first table which concatenates the Manager and Year. HOWEVER, In my example it would be fine but in my sales report there is a lot more data with a lot more going on. I don't want to have additional hidden columns that people might stumble upon and change).
I want to use formula and NOT code as other people will be using the sheet and making changes to it. I want them to simply be able to autofill any additional rows rather than me having to update code.
I have attached my example.
I have a column of cells that the user enters values in ... say cells A1 through A10. Once all cells have values in them, I want cell A11 to display the sum. The formula I'm trying to use is:
{=IF(ISBLANK(A1:A10),"",Sum(A1:A10))}
But this is putting the sum in A11 as soon as any cell has a value in it.
Is there an easy way with a formula to require all ten cells to have values?
For example: C4=5,C5=18, and C6=7.
I want A1 to show 4,5,18,7 (the values of cells C4 to C6).
I believe I have done this before, about 10+ years ago.
I am attempting to create a formula that is including numeric values in multiple cells but I want to exclude cells that have an "N/A" value. I am calculating the blended average price using the volume and price from multiple cells but some cells don't have volume or price but an "N/A" instead. The blended average price should be $68 but how do I calculate that including all the cells...even the cells including the "N/A"
Attachment example included.
I want my macro to transform the cells whom values are visible into pure value no formula "behind them". I have simple multiplication formulas in those cells. If The result of a multiplication is 0 and I format that cells to not show me that 0 with "0.000;-0.000;;@" the macro still deletes the formula from that cell.
[Code] .....
I would like a formula which will look at a range of cells, for instance a2:g2 and count how many of the cells contents are the same. The cells contain a combination of text and numbers.
View 9 Replies View RelatedI am trying to find a way to use information in one cell in order to look up corresponding multiple values on another sheet. The problem that I am running into is that VLOOKUP only returns the first value. I need the values to be calculated in different cells going vertically, not all combined in the same cell as was in an earlier post. I am not looking to sum anything so a pivot table also doesnt work.
Sample data:
A / B / C / D
Identifier / Pub ID / Invoice # / Job #
ABCD1234 / ABCD / 1234 / A41254
ABCD1234 / ABCD / 1234 / B41254
ABCD1234 / ABCD / 1234 / C41254
DCBA4321 / DCBA / 4321 / A56789
etc.
I am looking for it to do this:
A / B
Identifier / Job #
ABCD1234 / A41254
/ B41254
ETC.
I want to enter ABCD1234 into another worksheet and have it return all of the job #'s, but I have a lot of these so I don't want to have to look up how many job numbers there are associated with it and have to enter different formulas into multiple cells. Filtering also isn't an option as there are simply too many cells to calculate.
I have the following VBA code, which works nicely -
PHP For Each C In Sheets("data").Range("A2", Range("A2").End(xlDown))
C.Offset(0, 5).FormulaR1C1 = "=IF((RIGHT(RC[-1],3)=""ago""),RC[-1],"""")"
Next C
What I want to do is Paste As Values to each of the cells in the above to convert the formula to a static value,. Is there a simple bit of code I can include in the above loop, instead of doing a Selection.Copy Selection.PasteValues etc over the range?
I need conditional formatting formula that evaluates the values in a row of cells (7 total columns) and counts the number of entries that are 30 or greater. If there are at least three, then I need to apply formatting.
I just can't get the formula right:
Code:
=(COUNTIF(B7:H7,
Code
Description
Rate
Formulas
123
Afghanistan
0.07
=MAX((B2:B30000="*Afghanistan*")*(C2:C30000))
[code].....
I am trying to find the Maximum Value in Column C based on the criteria that Column B contains "Afghanistan but NOT Mobile.
In a second cell I also want to find the maximum value in Column C based on the criteria that Column B contains "Afghanistan" AND "Mobile"
The code I have come up with is in the table however it is only showing the max value for cells containing "Afghanistan". If I add the wildcard "*" it does not return a value. how I can achieve my objectives?
I need a cell formula that will (a) identify the highest N values in an above specified column range, (b) color the interior of those N cells (I suspect that this is not possible), and most importantly (c) return the average value of N corresponding cells, where the corresponding cells are located on the same rows as the identified N high value cells but in a specified column to the left (not necessarily adjacent)
Does anybody know what this formula would look like?
Example:
-----------------------
...| A | B | C | D | E | F |
-------------------------
1 |....| * |.........| 7 |...
-------------------------
2 |....................| 2 |...
-------------------------
3 |....| * |.........| 6 |...
-------------------------
4 |....................| 1 |...
-------------------------
5 |....| * |.........| 5 |...
-------------------------
6 |....................| ? |...
-------------------------
? = average of B1,B3,B5 where (N = 3) and (specified column to the left = B)
I looking for a macro that will go through multiple sheets & change specific cells to values if the column header is = to value set in specific cell.
for example
I would like the macro to look at row 3 in each tab (page 1, page 2, page 3) and if the value you is equal to X (parameter input on different sheet) then change the formula to a value in row 6 & row 12 of that column.
I'm attaching an simple example that i looking for this on. The green cells are the one i would like to change to a value.
Book1.xlsx
I'm using this custom format for my values:
0"%";-0;;@
The problem I'm running into is that although I want it to apply only to values
Is there a formula that can display values in a list? I can do this with a piviot table or a filter, but was wondering if I can do it with a formula?
i.e
[Data]
A B
Simon 24
Mike 31
Simon 18
Simon 51
David 71
Mike 61
Simon 47
David 12
I want to display only simon's Values i.e:
24
18
51
47
1 workbook, 2 worksheets (or tabs). On tab 1, I want a formula/alert that tells the user if any duplicate values exist in Column A of tab 2
Tab 2, Column A, has Unique ID's (6 digit numeric values)
The user manually inputs the ID's on new rows in Column A
Row 1 is reserved and in use for something else
Row 2 is my header, so cell A2 says "ID"
Row 3-623 currently contain unique ID's
When the user inputs a new ID into cell A624, then they return to Tab 1, I want my formula/alert on Tab 1 to tell the user that they have duplicates in Column A of tab 2. I know the Conditional Formatting, but if the user copies in 100 new values, they won't necessarily see the highlighted cells. My tab 1 is my "checks and balances" and the last place the user is suppposed to look to ensure that they haven't created any duplicate ID's. If the user sees a warning message that says duplicates exist, then I'll tell them that they need to look at column A (for cells that have been conditionally highlighted).
One issue that I'm running into with the conditional highlighting is that I want cells A3:A1048576 to already have the conditional formatting - this way when the user inserts a value into Cell A624, then A625, etc they conditional formatting is already there. Right now with data in cells A3:A623, cells A624:A1048576 are all highlighted with the Red/Bold Red Font (which is okay I guess), but ideally it would be nice to not count 2+ empty cells as duplicates and I'll have to have my formula on Tab 1 not include the blank cells.
I DO NOT want to use the Remove Duplicates feature of Excel 2010. If I remove them I could be removing data in columns B, C, D, etc that belong to the Unique ID. I just need the user to be told in Tab 1 that they DO have duplicates and I'll train the user how to research this and fix it.
The reason I want to look for duplicates in the entire Column A is because the list of Unique ID's will grow over time.
What's the formula that will search a column of values and "pull out" only one of each unique instance? The expected result, then, for the following data-set would be 4,5,6,7,8,9.
4
4
4
4
4
5
5
5
6...........