Generating And Copying Chain Of Code
Dec 12, 2013
So I created a formula to genterate from one program to the other. I am use to being able to click at drag the formula and have it create a new one such as 1,2,3,4,5. This formula is a little more complex and does not do that.
Here is the formula.
='C:Documents and Settingsjmor08jDesktop[DAILYLOGSHEETS.xlsx]120913'!$N$6
='C:Documents and Settingsjmor08jDesktop[DAILYLOGSHEETS.xlsx]121013'!$N$6
When I highlight and drag them I want it to create 121113,121213, and so on. It just keeps creating
='C:Documents and Settingsjmor08jDesktop[DAILYLOGSHEETS.xlsx]120913'!$N$6
='C:Documents and Settingsjmor08jDesktop[DAILYLOGSHEETS.xlsx]121013'!$N$6
='C:Documents and Settingsjmor08jDesktop[DAILYLOGSHEETS.xlsx]120913'!$N$6
='C:Documents and Settingsjmor08jDesktop[DAILYLOGSHEETS.xlsx]121013'!$N$6
='C:Documents and Settingsjmor08jDesktop[DAILYLOGSHEETS.xlsx]120913'!$N$6
='C:Documents and Settingsjmor08jDesktop[DAILYLOGSHEETS.xlsx]121013'!$N$6
View 4 Replies
ADVERTISEMENT
Apr 28, 2006
I have these two woorkbooks. One serves as a register of warranty cards and the other as a template of a warranty card. For each new warranty card I need the register to generate automatically a new consecutive number. This new number should automatically be loaded in a specific cell in the template document after opening it (with a hyperlink or a button from the register, for instance), so that I don't need to mannually type the number in the template.
View 3 Replies
View Related
Dec 3, 2013
I have two workbooks because I can't figure out a chain formula that I need to be able to use in reverse.
First workbook:
Row A1 = x
Row B1 = A1*1.25
Row C1 = B1/0.55
Row D1 = C1/0.42
Second workbook (the same formula, just reversed):
Row A1 = B1/1.25
Row B1 = C1*.55
Row C1 = D1*.42
Row D1 = x
I would essentially like to put information in either A1 or D1 and have the other 3 boxes fill out automatically; is this possible or am I stuck using two workbooks...? Would a circular formula be able to work in my case?
View 4 Replies
View Related
Feb 4, 2010
I have attached a sample file with two sheets.
Sheet 1 has two columns, 'A' represents a parcel number, and 'B' represents an indicator for the plat name in which the parcel number is located.
Sheet 2 also has two columns. 'A' represents the same indicator as Sheet 1 Column 'B' and Column 'B' is the formal name for the plat.
What I hope to achieve is Sheet 1 Column 'A' to be the parcel number (as it currently is)and Column 'B' to be the formal name for the plat (instead of the number).
As you will notice, the plat numbers on Sheet 1 Column 'B' can repeat many times. A plat number of '0' would mean it is not associated with a plat and therefore should return a blank.
The 'real' file has over 275,000 parcel numbers. All total, there are approximately 8800 differnent plat names.
Due to my 'lacking' skill level, I need it to be a macro as I have yet to learn other methods.
View 12 Replies
View Related
Aug 31, 2009
I have a table of some numbers, and along the left side is a column representing what each row of data is. So in this case, it is a list of letters. What I'm doing is in each column of the data, I find the maximum number, and then I want to have it list below that what letter that maximum number is from. Here is an example:
View 2 Replies
View Related
Jan 14, 2008
I'd like the users to be able to change some detail in a couple of places and have it updated throughout the spreadsheet. Basically, the user can change the line name in any of the input sheets and the code changes the sheet name, and searches for the reference to the old name in the overview sheet and changes it accordingly.
The problem I have at the moment is that I would also like the user to be able to change the line name from the overview sheet too... I am having trouble thinking how to have similar code in the "Overview" sheets Worksheet_Change event without getting into a big constant loop... e.g. if the line name is changed via code on the individual input sheets won't that then trigger the first code, which will trigger the second etc. etc. I have the following code in the ThisWorkbook section:
Private Sub Workbook_SheetChange(ByVal Sh As Object, ByVal Target As Range)
Dim sName As String
Dim sOldName As String
Application. ScreenUpdating = False
sOldName = ActiveSheet.Name
If Target.Address <> "$B$1" Then Exit Sub
sName = ActiveSheet.Range("B1")
On Error Goto ErrorHandler
ActiveSheet.Name = sName
On Error Goto 0
Sheet8.Select 'this is the overview sheet
Cells. Find(What:=sOldName, LookIn:=xlValues, _
LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, _
MatchCase:=False, SearchFormat:=False).Activate........................
View 2 Replies
View Related
Jan 23, 2010
I am using the code below to copy a sheet to new file end send via email. As I have some vba code in the sheet which I am coping I need to delete before sending.
View 7 Replies
View Related
Feb 5, 2010
Basically, I have a worksheet of client info on a row by row basis.
Each client has a ref number (eg A4 is the ref for the first client. A5 the next, A6 the next etc etc)
I would like to know how to copy and paste each ref number into worksheet 'Proforma Template (2)' every 11 rows down, until the end of the client list is reached.
So, copy/paste value of cell A4 into 'Proforma Template (2)' cell E9, then A5 to 'Proforma Template (2)' E20 etc (every 11 rows)
(I've read up about various types of loops but not sure where to go with it)
Once I have this on a macro, I'll use vlookup to take the rest of the data across. (im more familiar with using vlookup so should be ok there)
View 9 Replies
View Related
Apr 16, 2006
how to make such code by VBA. but i'm desperate to have it.
I need a code to copy a two different ranges from two sheets and paste them below the original ranges in each sheet "a range a sheet". And then if a clicked again the same ranges should be pasted after and so on so forth.
View 3 Replies
View Related
Apr 13, 2007
I am working with Windows Vista, and Office 2007 and am trying to figure out what should be a simple line of code to copy the text from 2 textboxes on an excel sheet to a separate textbox located on another worksheet.
The code I am trying keeps giving me the debug error, saying
Here is my full code; runtime error 438, object doesn't support this object or method.
Private Sub Workbook_Open()
Worksheets("Summary Page").TextBox3 = Worksheets("Description").TextBox1 & Worksheets("Description").TextBox2
End Sub
View 9 Replies
View Related
Jan 14, 2014
This Code is Pasting "A1" into the destination - format and all. I need it to only paste in the value.
Sub test()
Dim lastrow As Long
lastrow = Sheets("Sheet1").Cells(Rows.Count, 1).End(xlUp).Row
Sheets("Sheet2").Range("A1").Copy Destination:=Sheets("Sheet1").Range("A" & lastrow)
Application.CutCopyMode = False
End Sub
View 2 Replies
View Related
Sep 2, 2008
My macro does some calculations for a worksheet. I need the macro to loop through all the worksheets regardless of how many worksheets there are. My first sheet is a summary page with the names of the subsequent sheets that the macro needs to do calculation on. I need the macro to recognize the worksheet names in the summary page and run for each worksheet name. For instance the next time I run the macro I may have fewer sheets of more sheet names in the column. It sounds almost like an Indirect function problem.
View 9 Replies
View Related
Oct 7, 2009
I have written a code for a cell in excel but it only works for the row it is on. I want to copy this code down the column (until reaching an empty row) will cells refernced in the code changing accordingly (just as if i had written the code in the cell and dragged it down a column). A sample of the code I have written is given below.
Private Sub Worksheet_Change(ByVal Target As Range)
If Range("E4").Value = "L" Then
Select Case Range("D4").Value
Case 43
Range("H4") = "=2*G4"
Case 48
Range("H4") = 60
End Select
View 9 Replies
View Related
Mar 18, 2007
i m looking for code that would copy the contents of cells A3:E100, but there might not always be 99 rows of data so could it check for rows of data below row 3 between A and E, and then copy G3:H4, all this data is in ' sheet 2' and could it paste all this data in 'sheet 3' but two columns away (to the right) of any existing data already pasted in row 3.
View 4 Replies
View Related
Jan 28, 2009
I've been trying to use the source code from one of my earlier modules pasted into a new one.
The only thing I changed was the name, and the necessary parameters.
The code doesn't run, is there some logical reason for this?
View 9 Replies
View Related
Feb 20, 2013
I've attached a sample workbook in which there are 3 macro-buttons.
The buttons will paste a shape in the active cell. So this means the buttons themselves could be deleted and replaced with a shape.
Since locking and then protecting the cells disables the macros, how can I amend the code to make sure the buttons' cells are protected from the copying and pasting macros? Or, how do I ensure that the macros only work in A1 - E5?
View 4 Replies
View Related
Apr 27, 2014
The idea is that I start out with a number of XML files, which I'm trying to manipulate to calculate descriptives and make graphs of in Excel.
So I've made a large "script" in VBA to accomplish these goals, which works, but I'm trying to optimize the code step by step.The overall process that I want to achieve, consists of :
1) Open the XML in Excel as an XML Table
2) Use the filters in the top row of that XML Table to select the data that I want to use
3) The resulting selection consists of data in 6 columns of which I only wish to select column 2, 5 and 6
4) I only wish to select the data in the table of column 2, 5 and 6 (without the header and only the cells in the table) and copy
5) Last step is to paste this data in Sheet "Calculations"
The step I'm working on right now, is step 3-4. My current code is: [Code] ......
This does the job, but I'm trying to optimize it, since I'm handling tons of XML files and I'm performing this copy function a number of times per XML file.
This copies the data of all the columns in the table for the cases that meet the selected criteria, but I'd like to make an even stricter selection of only column 2, 5 and 6 to not waste space and processing power.
So I tried to select the data from the 3 columns and combine them with the Union function, to copy them as one array to the sheet Calculations.
Optimized a similar VBA code to: [Code] ........
But I'm having issues with getting the right selection method and when I run the macro, I get the error message that the Copy and Paste area aren't the same size.
I tried to alter my initial code to something in the line of : [Code] ..........
But I get error messages 1004 : Method 'Range' of Object '_Global' failed.
I've also tried [Code] ........
But this seems to select the whole column, including the header and tons of rows even after the table ended.
View 2 Replies
View Related
Sep 19, 2007
Everyday system generates a notepad with the information.. from the notepad i ve to copy paste the info to the excel manually.
Can a code be written where (after downloading information to the excel from the notepad) it automatically fill the information in the excel.
For your reference i ve attached both notepad and excel with dummy datas.
(how i do manually)
View 14 Replies
View Related
Dec 27, 2011
I have data on Sheet2 and would like to only copy all rows associated with column D2 to the Sheet3. For example Sheet2 has two different values Voice or Data I would like to copy all rows associated with column D that contains voice to Sheet3.
View 4 Replies
View Related
Oct 1, 2012
I need to copy a range of cells from various columns/rows from 1 sheet into 6 other sheets, but into a specfic range of cells(in the same workbook). I am looking for a code which would copy the cells, then allow me to save the sheets it has copied them to as seperate workbooks without loosing the values it copied. I would also like to make amendments to the cells which have been copied onto the other sheets, without having an error message if I type anything into the cells, also having any blank cells left blank rather than placing the 'o' value in the cell.
View 2 Replies
View Related
Feb 9, 2014
I am trying to do the following with VBA.
What i need is to find out the last cell with data and then selecting the whole range and copying it.
Please see the below.
As you can see, the column with the "longest" data range is B9,C9,D9,E9.
I need a VBA code to detect which Column has the longest Data and from there copy the entire range.
Hence, in this case, the range to be copied is From A2:J9.
Column A
Column B
Column C
Column D
Column E
Column F
Column G
Column H
Column I
Column J
1
2
ttt
rrr
m
vvv
gg
ff
fff
fff
fff
[Code] ..........
Hence,in this case, the range to be copied is From A2 to J14.
Column A
Column B
Column C
Column D
Column E
Column F
Column G
Column H
Column I
Column J
1
2
hjhjh
ghj
gh
ghj
ghj
ghj
[Code] ..........
View 5 Replies
View Related
Jan 6, 2009
use a vlookup with an IF function to display those unmatched record found in sheet1.
In sheet2, there are some new and old firms. Thus I need to separate them to process.
View 9 Replies
View Related
Aug 12, 2009
I'm knocking up a spreadsheet that deals with expense claims for a small company. Under the Reason column you pick an expense type from a drop down list. What I'd like to be able to do is to set up a graph or table that can identify how much is spent on the different things. As there is a drop down menu system I'd like the worksheet to be able to differentiate the expense types and generate a total balance for each. Enclosed is an example of the spreadsheet.
View 2 Replies
View Related
Jun 27, 2009
For Ex:- If there are three Items.. A B C and forming a group of 2
then the the total no of combinations would be permut(3,1) = 6...
I need this to be shown as follows depending on the no of itmes and no of group no=2 in this case...
Permuations & Combinations are as follows:
AB
AC
BC
CA
CB
BA
View 10 Replies
View Related
Jun 11, 2013
I am trying to create a pdf from a selection of cells. I tried using the macro recorder, and it only got some of what I needed.
select range b11:l44
save as pdf using above range
file location will be located in A1
file name will be located in d1
open pdf
View 5 Replies
View Related
Nov 21, 2006
im given an area and im asked to generate 10000 random numbers. how can i?
View 2 Replies
View Related
Feb 5, 2007
I have ten numbers (i.e. 1,2,3,4,5,6,7,8,9,10) and I'm trying to figure out how to make Excel generate a list of all the combinations possible for these 10 numbers. I'm trying to avoid using a VBA script. Is it possible to accomplish this task only using a function formula? This way I will have the ability to tweak the formula and test different qauntities of numbers (i.e. 1,2,3,4,5,6,7 or 44,56,77,33). Is getting a list of all possible combinations to output on a single column with commas between numbers possible with a formula?
View 5 Replies
View Related
Aug 1, 2008
I would like to know whether it is possible to use some VBA/Macro code to complete the following task: when the macro starts to run, it first create a data table, do all the calculations necessary and then paste all the end values on the data table itself and remove the data table it created. the reason why i asked that was because sometimes it takes forever for one of the excel-based programs that i am working on right now due to the fact that it takes a long time to compute the data table. i understand u can always set the calculations tab in excel to be automatic except for tables, but somehow this setting does not stay with the file and hence when i give the spreadsheet to the client, i will have to show them how to set the option, which is a hassle, also, i just want to give them the final values of the calculations and not let them see how those things are done.
View 3 Replies
View Related
Oct 20, 2009
I have a spreadsheet of 1000+ companies and I want to take a random sampling of 100 of them. I would assume this could be accomplished by auto-filling a numerical value to each line of data (which I did), then scrambling only the column with the numbers (which I can't figure out), and then selecting the entire text and resorting it to put the numbers back in order and then just work with the first 100 rows (which I can do, if I knew how to make the numbers random).
View 10 Replies
View Related
Dec 5, 2012
If i had a template in excell would it be possible when it was opened it could generate a new number for the sheet in a cell for Ref ID.
View 3 Replies
View Related
