Code For Copying Value From One Worksheet To Another
Feb 5, 2010
Basically, I have a worksheet of client info on a row by row basis.
Each client has a ref number (eg A4 is the ref for the first client. A5 the next, A6 the next etc etc)
I would like to know how to copy and paste each ref number into worksheet 'Proforma Template (2)' every 11 rows down, until the end of the client list is reached.
So, copy/paste value of cell A4 into 'Proforma Template (2)' cell E9, then A5 to 'Proforma Template (2)' E20 etc (every 11 rows)
(I've read up about various types of loops but not sure where to go with it)
Once I have this on a macro, I'll use vlookup to take the rest of the data across. (im more familiar with using vlookup so should be ok there)
View 9 Replies
ADVERTISEMENT
May 18, 2006
I need help with a macro for copying and pasting of cells. I believe this should not be a problem for the Excel VBA experts, but for someone who can only record macro, I'm really at a loss.
Attached is a sample file, where sheet 'Source' is an example of the sheet from which data are to be copied. The other sheet, sheet 'Final' is an example of the final format that I need. The reason I'm doing this is I'm planning to upload my data into Access and so I need to convert them into a list format.
List of target columns in sheet 'Final' and source cells in sheet 'Source':
Column A: Biz ID - not sure if I really need this, by right it should be listed automatically once I paste the data
Column B: B2 of 'Source'
Column C: B2 of 'Source'
Column D: B1 of 'Source'
Column E: row 6, relevant column
column F: column K
column G: row 5, relevant column
column H: the specific amount
So basically I'm creating an entry for every amount in the table.
View 9 Replies
View Related
Jan 6, 2009
There is an autofilter applied to worksheet A, I would like to transfer only the autofiltered range from worksheet A to worksheet B, a clear worksheet B statement would also help.
View 9 Replies
View Related
Jun 9, 2008
I have one worksheet from which i need to copy only few columns (Ex column A,B, D,G...need not be in sequence.....) to a new sheet.can you please help me to write a macro for this.In addition: Do we need to specify the number of rows in column or is there any way to get data till the end of column automatically.
View 9 Replies
View Related
Jan 23, 2010
I am using the code below to copy a sheet to new file end send via email. As I have some vba code in the sheet which I am coping I need to delete before sending.
View 7 Replies
View Related
Apr 16, 2006
how to make such code by VBA. but i'm desperate to have it.
I need a code to copy a two different ranges from two sheets and paste them below the original ranges in each sheet "a range a sheet". And then if a clicked again the same ranges should be pasted after and so on so forth.
View 3 Replies
View Related
Apr 13, 2007
I am working with Windows Vista, and Office 2007 and am trying to figure out what should be a simple line of code to copy the text from 2 textboxes on an excel sheet to a separate textbox located on another worksheet.
The code I am trying keeps giving me the debug error, saying
Here is my full code; runtime error 438, object doesn't support this object or method.
Private Sub Workbook_Open()
Worksheets("Summary Page").TextBox3 = Worksheets("Description").TextBox1 & Worksheets("Description").TextBox2
End Sub
View 9 Replies
View Related
Jan 11, 2010
I'm attempting to copy the contents of the first row in the "banking center" worksheet into the first rows of all the other worksheets in the workbook. Ideally, I'd like to select from A1 to the last column in row 1 to copy. Edit: Fixed a couple things but still having trouble with the copying section.
View 3 Replies
View Related
Oct 7, 2009
In Sheet1, I have this:
Nos. Items Enter Qty
1 Item1 5
2 Item2
3 Item3 20
4 Item4 50
5 Item5
6 Item6 3
etc...
What I want is, whenever I enter the quantity in Sheet1 it will copy the row in Sheet2, say it will start in row 5 without the blank row and it is something like this:
Sheet2
Nos.Items Enter Qty
1 Item1 5
3 Item3 20
4 Item4 50
6 Item6 3
etc...
View 9 Replies
View Related
Nov 1, 2009
I have 2 workbooks, one is called AllData.xls and the other is SavedData.xls. I want to be able to copy only the highlighted data from AllData.xls and automatically populate to SavedData.xls by using a button.
View 9 Replies
View Related
Dec 12, 2013
So I created a formula to genterate from one program to the other. I am use to being able to click at drag the formula and have it create a new one such as 1,2,3,4,5. This formula is a little more complex and does not do that.
Here is the formula.
='C:Documents and Settingsjmor08jDesktop[DAILYLOGSHEETS.xlsx]120913'!$N$6
='C:Documents and Settingsjmor08jDesktop[DAILYLOGSHEETS.xlsx]121013'!$N$6
When I highlight and drag them I want it to create 121113,121213, and so on. It just keeps creating
='C:Documents and Settingsjmor08jDesktop[DAILYLOGSHEETS.xlsx]120913'!$N$6
='C:Documents and Settingsjmor08jDesktop[DAILYLOGSHEETS.xlsx]121013'!$N$6
='C:Documents and Settingsjmor08jDesktop[DAILYLOGSHEETS.xlsx]120913'!$N$6
='C:Documents and Settingsjmor08jDesktop[DAILYLOGSHEETS.xlsx]121013'!$N$6
='C:Documents and Settingsjmor08jDesktop[DAILYLOGSHEETS.xlsx]120913'!$N$6
='C:Documents and Settingsjmor08jDesktop[DAILYLOGSHEETS.xlsx]121013'!$N$6
View 4 Replies
View Related
Jan 14, 2014
This Code is Pasting "A1" into the destination - format and all. I need it to only paste in the value.
Sub test()
Dim lastrow As Long
lastrow = Sheets("Sheet1").Cells(Rows.Count, 1).End(xlUp).Row
Sheets("Sheet2").Range("A1").Copy Destination:=Sheets("Sheet1").Range("A" & lastrow)
Application.CutCopyMode = False
End Sub
View 2 Replies
View Related
Sep 2, 2008
My macro does some calculations for a worksheet. I need the macro to loop through all the worksheets regardless of how many worksheets there are. My first sheet is a summary page with the names of the subsequent sheets that the macro needs to do calculation on. I need the macro to recognize the worksheet names in the summary page and run for each worksheet name. For instance the next time I run the macro I may have fewer sheets of more sheet names in the column. It sounds almost like an Indirect function problem.
View 9 Replies
View Related
Oct 7, 2009
I have written a code for a cell in excel but it only works for the row it is on. I want to copy this code down the column (until reaching an empty row) will cells refernced in the code changing accordingly (just as if i had written the code in the cell and dragged it down a column). A sample of the code I have written is given below.
Private Sub Worksheet_Change(ByVal Target As Range)
If Range("E4").Value = "L" Then
Select Case Range("D4").Value
Case 43
Range("H4") = "=2*G4"
Case 48
Range("H4") = 60
End Select
View 9 Replies
View Related
Mar 18, 2007
i m looking for code that would copy the contents of cells A3:E100, but there might not always be 99 rows of data so could it check for rows of data below row 3 between A and E, and then copy G3:H4, all this data is in ' sheet 2' and could it paste all this data in 'sheet 3' but two columns away (to the right) of any existing data already pasted in row 3.
View 4 Replies
View Related
Feb 23, 2014
Excel Move-Copy Issue.pdf
I'm simply trying to copy a worksheet (from one location within a file) and place the copy elsewhere in the file. I continue to get an error message that looks like this: "A formula or sheet you want to move or copy contains the name 'Additional_Notes', which already exists in the destination worksheet. Do you want to use this version of the name? To use the name as defined in the destination sheet, click Yes. To rename the range referred to in the formula or worksheet, click No, and enter a new name in the Name Conflict dialog box."
The term above 'Additional_Notes' is just one of MANY references which (apparently) "already exist in the destination worksheet". I tried renaming the range as described above, and when I do, the above error message essentially re-appears, but this time the term 'Additional_Notes' is replaced with another bit of text. And so on. I am not able to copy the worksheet and place it elsewhere in the file without this error message cropping up. I've used the move/copy function thousands of times.
I am able to make a copy of the worksheet and move it into a new (blank) XLS file...but NO luck copying the worksheet and placing the copy in the same file...
View 1 Replies
View Related
Nov 18, 2008
I have a workbook with 2 worksheets. On sheet 1 (Roster) is a list of names; on sheet 2 (Summaries) is a set of calculations.
I want to create multiple copies of sheet 2 (Summaries) and name them according to the list of names on sheet 1 (Roster).
Creating and naming the worksheets appears to be working fine. The problem is that the worksheets that are added are blank, not copies of worksheet 2.
My code follows.
View 6 Replies
View Related
Mar 13, 2009
I’m building a data logger and all the info from data logger goes to sheet1 using serial port. I need to separate log1, log2, log3 to each individual sheet. Log1 must be copied to sheet2, Log2 must be copied to sheet3 and etc. The reason I need to separate Logs into different sheets so I can create charts for each Log automatically. Also I don’t know how big each log can be. Here is sample data what I’m getting to sheet1. I can change my datalogger to output text log1, log2, log3 to any numbers such as 9999 to make it easier. I need your help to be able sort out each data Log to each worksheet.
View 7 Replies
View Related
Oct 15, 2009
The format of the data shown in sheet below is divided by '|' where it represents a cell divider.
Sheet1
-------
A | B | C
ClassA | ClassB | ClassC
Sheet2
-------
A | B
ClassA | Student01
ClassA | Student02
ClassB | Student01
ClassC | Student02
ClassC | Student03
ClassC | Student04
Sheet3 - Final Output
-------
A | B | C
ClassA | ClassB | ClassC
Student01 | Student01 | Student02
Student02 | | Student03
| | Student04
Sheet3 = check if there is a match between Sheet1 and Sheet2, if there is, then use Sheet1 as a header (ClassA, ClassB, ClassC) and paste the matched data under the respective header.
View 11 Replies
View Related
Feb 29, 2012
I have an Excel file that has several worksheets. One of the worksheets is a letter and one is an envelope. Instead of typing the name address twice I need to have th name and address info repeated onto the envelope each time I use enter info in the letter. I know how to do this with a formula but not with a text.
View 1 Replies
View Related
Mar 30, 2013
Is there any code that can be written so when a person selects a tab to be moved to a new workbook, the macro code in the existing workbook would be copied to the new sheet? I'd also like to use a button that the user could click on for the macro.
View 3 Replies
View Related
Feb 22, 2008
I have a worksheet with some arbitrary selection - it may be 1 cell, a 5 by 4 rectangle, or even a noncontiguous splattering here and there on Sheet1. I want to select the identical cells on another sheet. So I'm thinking something like
dim sht1 as worksheet, sht2 as worksheet
'set them appropriately, then...
sht1.selection = sht2.selection
View 9 Replies
View Related
Jun 15, 2006
I have a workbook containing a number worksheets. I need to copy one of these sheets and move it to a new workbook before copying and pasting the contents as values and saving as a new worksheet. Ideally the new workbook I'm creating would contain no other worksheets other than the one I'm copying in.
View 3 Replies
View Related
Jan 28, 2009
I've been trying to use the source code from one of my earlier modules pasted into a new one.
The only thing I changed was the name, and the necessary parameters.
The code doesn't run, is there some logical reason for this?
View 9 Replies
View Related
Aug 12, 2009
I am trying to copy the print settings(including the headers and footers) for one excel worksheet to another. I have found the following hint on internet and it works fine for copying the print setting(including the head/foot) but it is also grouping the worksheets. Click on the tab of the worksheet you want to copy. Then hold down the Shift or Ctrl key and click on the tab of the worksheet where you want the settings and click on File, Page Setup and OK. How can I just copy the print setting without grouping the worksheets?
View 4 Replies
View Related
Oct 19, 2009
I'm getting reports in an Excel file with more then 30 worksheets. All of them have the same structure. I would like to add them all in one single sheet and to place the source "sheet name" in the last column. All sheets have 12 columns with different number of rows (between 1 and 100). First row in each sheet is the header of the table.
View 4 Replies
View Related
May 5, 2014
I am attempting to write a small code for the following scenario.I have a workbook with worksheets GP1, GP2, GP3 etc & a template page as the last tab.
All the worksheets column names are same but have different data.Last worksheet is the template for all of them. How do I create a command button in template page... upon clicking the button,
it should create a tab just before the template worksheet incrementing previous tab GP3 +1-> GP4. GP4 should be a copy of the template page along with all the vb codes associated with the template page.So tabs looks like=> GP1, GP2, GP3, GP4, template
View 5 Replies
View Related
Jan 9, 2009
I have 2 worksheets that share some of the same data. However I do not want to have to populate the same information twice. Instead I want to be able to type the information required in the one worksheet and create an instruction for the data that overlaps with the second worksheet to automatically load. The catch is I need it to find the next blank row every time to add the data. EG
Worksheet 1 has columns: Name, ID Number, Date, Gender
Worksheet 2 has columns Name ID Number.
I want to be able to input data on worksheet 1 only and the the Name and ID number will be added to the relevant columns in worksheet 2.
View 2 Replies
View Related
Jan 26, 2009
I have a spreadsheet with various details sorted by date and i am trying to create a macro that will run whenever the workbook is opened and search the column "Renewal Date" for a date between now and 3 months time. For all rows with a date that meet this criteria it will copy the relevant rows and paste them to a new worksheet with the header. The renewal date column could be added to so i need the macro to run until it meets an empty cell. I have attached an example workbook with cutdown data and my attempt at the macro.
View 4 Replies
View Related
Feb 6, 2009
I want to create a macro that will take information from one worksheet to another. The problem is that the first worksheet has an autofilter and i do not know how copy information only from the cells that were filtered with the correct information without copying it manually.
View 3 Replies
View Related
