Get Max And Min Values From Dynamic Array
May 16, 2014
Presently I calculate a worksheet and store the result in any array the size of which is determined at the start. I then enter all the results in a worksheet and get the max and min values and numerous other data. I am trying to find a way to get the max and min values without having to enter the data to speed the routine up.
this is the code that puts the results into a worksheet.
Code:
Sub Recalculate() 'Recalculates the WorkBook
Dim Calc_
Worksheets(startSht).Select
Set Output = Application.InputBox(prompt:="Please select the 1st Output Range.", Title:="SPECIFY RANGE", Type:=8)
Set OutPutLabel = Application.InputBox(prompt:="Please select Label for
[Code]....
View 1 Replies
ADVERTISEMENT
Jun 22, 2012
I've am array formula that I use to provide highest values:
Code:
{=INDEX(Data!$D$2:$D$128, MIN(IF(LARGE(Data!$D$2:$D$128,ROW(A1))
=Data!$D$2:$D$128, ROW(Data!$D$2:$D$128)-MIN(ROW(Data!$D$2:$D$128))+1)),
MATCH(LARGE(Data!$D$2:$D$128,ROW(A1)), INDEX(Data!$D$2:$D$128,
MIN(IF(LARGE(Data!$D$2:$D$128,ROW(A1))=Data!$D$2:$D$128, ROW(Data!$D$2:$D$128)-
MIN(ROW(Data!$D$2:$D$128))+1)), , 1), 0), 1)}
I want to replace the range Data!$D$2:$D$128 with a dynamic reference: like that one:
Code:
ADDRESS(MATCH(Summary!$B$1,Data!$Q$2:$Q$10000,0)+1,
MATCH(Summary!$B$7,Data!1:1,0),1,1,"Data")&":"&ADDRESS(
MATCH(Summary!$B$1,Data!$Q$2:$Q$10000,0)+COUNTIF(Data!$Q$2:$Q$10000,Summary!$B$1),
MATCH(Summary!$B$7,Data!1:1,0),1,1,"Data")
The two formulas work well in separate sheets but crash when put together, how could I possibly insert the second address formula into the first one?
View 2 Replies
View Related
Apr 2, 2007
I am trying to count the number of items in an array, but want to protect against someone inserting a row and changing the position of the first item destined for the array. The first item is in F25.
TickerNum = Sheets("Dashboard").Range(Range("f25"), Range("f25").End(xlDown)).Count
Is there a way to ensure that it always picks up the value currently in f25.
View 9 Replies
View Related
Oct 2, 2008
I have a class module with several private variables, including one that is an array of a user-defined type. I am trying to set the values of a single element of this array with "Property Let ..." from a string array:
View 4 Replies
View Related
Aug 10, 2006
I have a workbook that launches a form for a user to confirm (or un-confirm) some data retrieved from an Access database. I would like to put the "confirming" aspect of the process into a checkbox array. The recordset can return anywhere from 1 to around 12 records. I would like to add the checkboxes on the fly based on how many records were returned. Anyone have some sample code to show me how to add these to the form at run time?
View 9 Replies
View Related
Oct 1, 2013
I'm trying to create an index array that resizes its array starting location.
{=IFERROR(INDEX($V$17:$AU$17,1,MATCH(TRUE,V18:AU18
View 3 Replies
View Related
Nov 11, 2009
I am trying to sqaure every element in a dynamic array and display the result . I donot understand how can I select the value in the cell using VBA?
Dim Y as variant, d() as double, i as long, j as long, rows as double, cols as double
Set Y = Application.InputBox("select the matrix: ", Type:=8)
Rows = UBound(Y)
Cols = UBound(Y, 2)
ReDim d(1 To Rows, 1 To Cols)
for i = cols
d(1,i) = ______==>
How do I select the value of element in that particular cell and how do I sqaure it?
I know
cells(rowindex, columnindex)
is used to select a particular cell but If I have a large array it would be difficult to go cell by cell and sqaure it.
View 9 Replies
View Related
Mar 6, 2010
How can I make a dynamic array public?
I have to Dim it so it stays valid only inside the sub.
Public MyVar()
Sub test1()
Dim MyVar()
ReDim MyVar(1 To 4)
For x = 1 To 4
MyVar(x) = "ffffff"
Next x
End Sub
Sub test2()
For x = 1 To 4
Range("A" & x) = MyVar(x)
Next x
End Sub
Error I get is 'MyVar(x) = Subscript out of range'
View 9 Replies
View Related
May 9, 2007
I am trying to replicate the following code using Cells references so that the row can be made a variable. I basically want to make the search array smaller with each loop.
LMatch = WorksheetFunction.Match(Cells(3, 3), Sheets("Product Matrix").Range("B3:B250"), 0)
The above works, the following two variations don't:
LMatch = WorksheetFunction.Match(Cells(3, 3), Sheets("Product Matrix").Range(Cells(ArrayStart, 2), Cells(250,2), 0)
LMatch = WorksheetFunction.Match(Cells(3, 3), Sheets("Product Matrix").Range("B3:B250").Item(ArrayStart, 2), 0)
View 7 Replies
View Related
May 16, 2008
I play in a rock band and i'm trying to create a randomly generated set list based on categories.
Rock, Blues, Slow, & Original are the categories
My sheet of songs is sorted perfectly by these categories already and I have dynamic ranges already named to their respective categories.
the module i am using to randomize these categories does not dynamically expand....
View 8 Replies
View Related
Aug 10, 2012
Excel 2007 is my version. I'm trying to build an array from a dynamic range. I will know the column letter and lastrow.I think I could do this via a FOR and NEXT routine but there has to be a more efficient way. Here is my inefficient code idea:
Code:
Dim orgctarray(65000) As Variant 'because I don't know how long the array will need to be
Dim cnt as integer
Dim startrow as integer[code]....
So as you see, technically, I need to take sheet1.range("B3:B" & lastrow) and turn it into a vb array (I don't want to copy the data to some hidden worksheet and do the work there)I'd also like to remove duplicates and sort orgctarray alphabetically after I have completed building it.
View 5 Replies
View Related
Jun 28, 2007
(Auto)Filter or a listbox somehow functioning like it?
Hi Excel guru's, i've got the following question:
Can I fine-tune the AutoFilter function so it filters more flexible? ....
View 9 Replies
View Related
Jun 13, 2007
im currently using a static array to select multiple sheets at once which works alongside another Sub
Sheets(Array("Group1", "Group2", "Group3", "Group4")).Select
i have a button that creates a new sheet and names it "GroupX" X being the next number, it automatically adds on the right number by itself and it works fine...
i want it my array to be dynamic so that i dont have to manually edit the array and the macro every time i add a new sheet.
i have tried things like:
Dim MyArray As Variant
Dim Shts As String
K = Sheets.Count - 4
For p = 1 To K
Shts = "Group" + p
Redim MyArray(K) As String
MyArray(K) = Shts
Next p
Sheets(MyArray(K)).Select
View 9 Replies
View Related
Apr 15, 2008
the built in "Join" function can join all elements of a 1-dimensional array into a string with delimiter. Now, how do I do that with multi-dimensional array if I just want to join 1 dimension of it.
For instance, I have:
m = 10
n = 20
Redim my(m, n)
'assign values to array here...
'I want to join, say, my(5, 0 to n) only
'How to do that without declaring a new 1 dimension array?
Also, I want to write a join sub/function to do the above for n-dimensional array, do I need to write each one for every number of dimension (1 sub for 2-dimension, 1 sub for 3 dimension, etc.)?
View 4 Replies
View Related
Nov 20, 2008
I'm trying to create a dynamic array so that when a user enters the first sheet name via an input box, excel will know to select the other sheets with ending (2), (3), (4) etc.
Currently this code works only if there are 4 sheets present (as I set this way), anything lower/higher is out of range.
How do I make it so that it will select sheets if there are less than 4 sheets present?
I tried nesting, but I pretty sure this array needs redimming or something. Is ubound a better option?
View 5 Replies
View Related
Oct 22, 2013
Question contained within code:
Code:
Dim MyArray(6, 1) As String
Dim i As Integer
'' Array List 1
[Code]....
'If lbxLI = any list index from Array List 1 then use the value stored in Array List 2 to give Listbox 2 its rowsource.
'For example; ListIndex "0" would produce a row source "_0" for listbox 2. Else if ListIndex "1" is selected, produce row source "_1" for listbox 2.
' I would like to achieve this from one "If" statement. I'm guessing it must be possible using a loop, I just can't think how despite a lot of messing about with code.
View 1 Replies
View Related
Feb 11, 2014
I have 7 sheets including the table as you can see on the attached. Now, each sheet is allocated to individual items e.g. item 10, item 20 and so on. I can't figure out how to return all the Item 10, 20, 30 ... to the corresponding sheet. It says Item 40 to all sheets.
View 8 Replies
View Related
Jul 20, 2009
I found quite a few posts about this problem, but none of the answers was any use to me. I need to redimension a 2 dimensional array in a Sub. I deleted all the code that is not of interest:
View 3 Replies
View Related
Aug 3, 2006
i have a very large spreadsheet filled with telephone numberS and some other codes that go with them...i need to match the codes with the phone numbers.
Sub TRCO()
Dim TNs As Long
Dim i As Long
Dim TempArray() As String
Dim TRCO As String
Dim CD03 As String
Dim ASOC As Range
TRCO = "TRCO"
CD03 = "CD034DF1"
'Filter TN's
Columns("B:B").EntireColumn.Insert
Set tempRange = Range("A6", Range("A65000").End(xlUp))
With tempRange
. AdvancedFilter _...................
View 2 Replies
View Related
Nov 12, 2009
Is it possible to get Dynamic Values in a Msg Box
I want a Msg Box which will show different values each time upon selection of a different items in a Dropdown...
I have a Dropdown which has different values in it and the tentative price of each Item in the next column...
Now I want to use some kind of VLOOKUP as well but in VBA Format...
Example:
Col A-------Col B-----------------Col C
Sr.No-----Expense List------------Tentative Price
1------------Internet Charges--------500
2------------Newspaper Charges------400
3------------Milkman Charges---------1684
4------------Sundry Expenses---------?
5------------House Maintenance------1500
6------------Electricity Bill------------?
7------------Telephone Bill------------?
Now this is an Expense List present in Sheet 2 and In Sheet 1 Cell F5 I would have a Dropdown where I would be Selecting the Items from Column B
i.e $B$2:$B$8 I want the Msg Box to display the tentative price of each selection present in the column C...I know I can use Vlookup and Show but I want to make it user-friendly and not have to many cells occupied with formulas as the MSg Box will display the price but I still would be manually entering the Price.
View 4 Replies
View Related
Aug 18, 2009
I have a Vlookup which I want to modify so that it can become dynamic as the table array part of the vlookup will change.
So the basic vlookup is as follows:
=VLOOKUP($R$3,ATTRIBUTION_FACTSET!$M$60:$P$73,2,0)
but the data I am looking for wont always be in the range M60:P73.
So I tried to make it dynamic by doing the following:
=VLOOKUP($R$3,INDIRECT("ATTRIBUTION_FACTSET"&"!M"&U1&":P"&V1),2,FALSE)
The idea being that U1 and V1 would be numbers that can change so in this case U1 would equal 60 and V1 would equal 73
This vlookup is giving me #N/A and no matter how I modify it I cannot get it to work.
View 3 Replies
View Related
Mar 26, 2014
The values in Cells D1, D2 and D3 are user inputs.
A formula in B16 should sum values in database (ie sum of B6 to B11)
Example :
A
B
C
D
E
1
Enter the column no
B
2
Enter the start row no
6
[code]......
Result
149
View 1 Replies
View Related
Jan 5, 2008
Say there are two changing values in a spreadsheet: A row reference, and a column reference, called sRow and sCol.
sRow and sCol are integers, and they are also changing values.
I want to know how to find how many cells have something in them on row R, starting from column C to infinity (To the right). But the problem is that R and C change sometimes, so I have to make some sort of dynamic CountA formula.
I know I have to use CountA() to do this, but I don't know how to make the range reference just from two integers. What I have tried so far is CountA($sCol$sRow:$sRow), but this does not work. How do I properly format this formula?
View 9 Replies
View Related
Mar 2, 2014
I'm trying to reference text from one worksheet to another. The data is all in column A on the "Template" worksheet, however the row varies (ie starts at row 5, then 7 the 9 etc). The cell row is always +2 rows on the previous row, and column A.
What can I use to pull across the cells with the information that I want, onto the "Report" worksheet?
View 3 Replies
View Related
Jun 24, 2009
Hey guys i really need your help with this one.
Basically I have a web query. In this web query the url has a part which changes to direct it to a different page with similar formatted data.
These variables that change are all in column A of my excel sheet.
So say it was http://www.google.com/search?hl=en&q=*VARIABLE*
and Variable changes according to the cell value in A1, A2 etc etc.
Right so say i set up a macro to get the data from the website, and i do some stuff to this data e.g. cop and paste it to B1. I need it to automatically change the urls variable to that of the cells below and then do the copy and pasting to the cell below (B2) it copy and pasted before(B1). Then again it change (the variable at the end of the url) to the value of Cell A3 and after its obtained that data copy and paste it below B3
Im not great with vb, like i can understand it if its infront of me but at this stage i cant write it.
Im guessing though i have to use like a counter that increases makes the variable pick it from the cell below.
Oh and i need it to stop at say when the variable reaches cell A360.
View 11 Replies
View Related
Jul 20, 2009
I would like to create a dynamic range based on a cell value. However, the cell reference may vary because the numbers of entries in the workbook can vary.
In addition to that, after the first range (eg. A1:A10), I would like to create a second range after the first (eg. A11:A20).
View 2 Replies
View Related
Nov 5, 2009
I am trying to find unique values on one page and copy/paste them on another page (all within one workbook). I tried to use advanced filter, but ran on some problems: i) it does not copy values on to the new page ii) it is not dynamic.
my information is entered on a daily basis, which is why I need the filter (or code) to be dynamic. The information, however, is not stored, but rather generates a daily invoice, this is why I want find only unique values to appear on a new page (invoice).
View 10 Replies
View Related
Dec 3, 2011
I am trying to make a chart based on the following values (for example) The X axis values are week numbers, the chart X axis must stop at Week 4, the data range still contains all these cells, but the chart will only show cells with values, If i'll put a value in Week 5, the chart will auto-expand itself to include week 5 too.
Code:
Week # | Value
Week 1 | 1
Week 2 | 2
Week 3 | 3
Week 4 | 4
Week 5 |
Week 6 |
View 3 Replies
View Related
Feb 7, 2013
How can I retrieve the values from a dynamic named range with VBA?
Let's say we have created a dynamic list with the OFFSET function, how can I get the values of that dynamic range?
View 9 Replies
View Related
Oct 10, 2007
web query parameters. This is what my .iqy file looks like: ...
View 9 Replies
View Related
