Dynamic CountA Values?
Jan 5, 2008
Say there are two changing values in a spreadsheet: A row reference, and a column reference, called sRow and sCol.
sRow and sCol are integers, and they are also changing values.
I want to know how to find how many cells have something in them on row R, starting from column C to infinity (To the right). But the problem is that R and C change sometimes, so I have to make some sort of dynamic CountA formula.
I know I have to use CountA() to do this, but I don't know how to make the range reference just from two integers. What I have tried so far is CountA($sCol$sRow:$sRow), but this does not work. How do I properly format this formula?
View 9 Replies
ADVERTISEMENT
Sep 6, 2007
I recorded this macro based on a column with a drop down window in which data has been filtered .....
View 12 Replies
View Related
Dec 18, 2006
How can I make it work ?
Sub test2()
Dim Wbk, aaa, bbb
Wbk = "\server1folder1file1.xls"
aaa = Application.WorksheetFunction.CountA(Workbooks(Wbk).Sheets(1).Range("A:A"))
bbb = MsgBox(aaa)
End Sub
View 9 Replies
View Related
Jun 18, 2009
How can I add validation to cell B76?
If there is no text in B71:B75 then don't allow a value in B76.
This would force them to add text description before entering a price.
View 9 Replies
View Related
Oct 1, 2008
I'm trying to create a report to show daily statistics for internet traffic. I have a large table showing a daily breakdown of performance, a table showing combined cost for all "Mondays", "Tuesdays" etc in the month and I also want a table to show the "average" performance for a typical "Monday", "Tuesday" etc.
The report will be used on a daily basis and I realised that until there is a full compliment of data the daily averages table would be inaccurate as it will be dividing the overall total for each day by the total number of occurances each day has in a typical month. This is wrong because if we are only halfway through the month then we will be dividing by days that haven't arrived yet.
View 3 Replies
View Related
Sep 16, 2009
A cell that will count an entry in another cell, within a range of numbers. EX: cell g1 will count the entries that range from 1000 to 1999 and 5000 to 5999 and 7000 to 7999. cell h1 will count the entries that range from 2000 to 2999 and 6000 to 6999 and 8000 to 8999. So if i had 6 cells with the following entries:
cell a1 - 1010
cell b1 - 2230
cell c1 - 5699
cell d1 - 6521
cell e1 - 7001
cell f1 - 8035
cell g1 would show 3
cell h1 would show 3
View 2 Replies
View Related
Jan 30, 2013
I am using the following formula to calculate the number of responses:
=COUNTIF([Cleanliness of Environment:],"None of the above")
However, I only want the number of cells which contain words other than "None of the above". The formula is counting empty cells. Is there a way to weed out the empty cells and receive a tally of only cells with words other than "None of the above" in them?
View 3 Replies
View Related
May 14, 2014
Code:
Private Sub custcountTB_Enter()
custcountTB.Value = Sheet5.Columns(1, 1).FormulaR1C1 = "=COUNTA(R[-4]C[-3]:R[95]C[-3])"
End Sub
All I am after is to count how many customers there are and show the value in text box.
View 9 Replies
View Related
Mar 8, 2007
I understand the non blank cells part of Count A but not the additional values part. I have looked at the examples in teh MS help and it doe not help at all really.
A1:Data
A2:Sales
A3:11/01/1900
A4:
A5:19
A6:3
A7:FALSE
doing =counta(a1:a7,2) returns a value of 7 but why? There are six non blank cells and no cells containing a 2
View 9 Replies
View Related
Jul 5, 2007
How do I count the number of cells in a range that has text, even though all cells has a link....
View 9 Replies
View Related
Sep 25, 2008
I've tried many variations but I can't seem to find a solution - I hope you can help. I'd like a formula that will ideally achieve the following:
IF B5:F5 all contain the letter y then return "Pass"
IF B5:F5 AND G5:K5 all contain the letter y then return "Merit"
IF B5:F5 AND G5:K5 AND L5:K5 all contain the letter y then return "Distinction"
IF B5:F5 is blank return blank
IF there are Y's in B5:F5 and the total < 5 return "Fail"
I did a sample sheet to show the desired output but don't know if this forum supports attachments.
View 9 Replies
View Related
Feb 26, 2014
I am copy/pasting arrays of numbers from several sheets into a main sheet.
The arrays are placed in separate columns next to each other. However the array sizes (Rows) varies in size
In the main sheet I have placed a =CountA function that counts numbers of non-blank cell within the columns, see sample file.
However sometimes it apparently counts cells that appear to be empty. I mean the cells are visibly empty, but gets counted anyway.
Is there an easy work-around or is it the general use of the formula?
View 3 Replies
View Related
Oct 8, 2011
I've long wondered what's the difference between these two formulae - COUNT() & COUNTA(). Even if I apply COUNT() function on a range of cells with intermittent blanks, it still returns the count of the values in the range. How different is this from the COUNTA() function?
View 2 Replies
View Related
Nov 12, 2012
I have a sheet with 2 columns. First Column lists sizes of Devices. Second colum lists a servername. Example:
A B
30 server_a
30 server_a
65 server_a
65 server_a
45 server_b
45 server_b
15 server_b
What I want to do is a device count, not device sum on a criteria based on Column B.
For instance whenever column B equals servername A, then count how many devices it has.
This would equal 4 instead of 190 which is the sum of the devices. I can do a sumif statement, very easily, but I don't want a sum, I just want a count.
View 4 Replies
View Related
Oct 2, 2008
Is there a way to use the COUNTA function in cell A1, that will return the total number of cells containing text in the rest of row 1, BUT, will start the count over after a blank cell.
EXAMPLE: A2, A3, A4 all have text added on a daily basis. The value returned via COUNTA in A1 = 3 (after the third day). However, A5 is blank, then A6 gets text on the 5th day, and now I need the returned value in A1 via the COUNTA function to = 1, because we started over after a blank cell.
Possible?
View 9 Replies
View Related
Apr 22, 2006
I am trying to produce VBA code that will perform the CountA function on a variable number of lines in a column. My macro first sorts the worksheet by department number and then inserts 2 blank rows when there is a change in departments. Most departments have several rows of data, but some may have only 1. In column N of the first blank row following each department, I want to count the number of rows for that department.
View 3 Replies
View Related
Nov 12, 2009
Is it possible to get Dynamic Values in a Msg Box
I want a Msg Box which will show different values each time upon selection of a different items in a Dropdown...
I have a Dropdown which has different values in it and the tentative price of each Item in the next column...
Now I want to use some kind of VLOOKUP as well but in VBA Format...
Example:
Col A-------Col B-----------------Col C
Sr.No-----Expense List------------Tentative Price
1------------Internet Charges--------500
2------------Newspaper Charges------400
3------------Milkman Charges---------1684
4------------Sundry Expenses---------?
5------------House Maintenance------1500
6------------Electricity Bill------------?
7------------Telephone Bill------------?
Now this is an Expense List present in Sheet 2 and In Sheet 1 Cell F5 I would have a Dropdown where I would be Selecting the Items from Column B
i.e $B$2:$B$8 I want the Msg Box to display the tentative price of each selection present in the column C...I know I can use Vlookup and Show but I want to make it user-friendly and not have to many cells occupied with formulas as the MSg Box will display the price but I still would be manually entering the Price.
View 4 Replies
View Related
Feb 4, 2010
I have using the following Formula: =COUNTA(A3:A7,A10:A14,A17:A21,A24:A28,A31:A35)
Basically is counts how many week days there are in a particular month. Now I have a cell (B47) that counts how many Bank Holidays are in that month. I am having trouble using the formula then minus B47. I must be missing something really simple.
View 3 Replies
View Related
Feb 11, 2010
I am trying to use =COUNTA(A25:A500) to retrieve the number of non blank cells. Only problem I am having is that the cells that are blank are also using a formula to gather its data. The cell would be blank but the formula is still there, so using =COUNTA(A25:A500) returns all these cells with the formula also.
View 4 Replies
View Related
Jan 27, 2009
I'm using the SUM, COUNTA and COUNTIF functions in a macro. The SUM and COUNTA works but the COUNTIF function does not return results.
Sub B_Test()
Dim myRange
Dim Results
Dim Run As Long
myRange = Workbooks(1).Worksheets("Master").Range("S6", Range("S6").End(xlDown))
Range("M3") = Application.WorksheetFunction.Sum(myRange)
myRange = Workbooks(1).Worksheets("Master").Range("D6", Range("D6").End(xlDown))
Range("D3") = Application.WorksheetFunction.CountA(myRange)
End Sub
I have tried countless ways to rewrite the COUNTIF line with no results or compiler errors returned. Originally had problems with the SUM and COUNTIF function and found that column formating was the problem. After clearing all column formats, the SUM function promptly began working but the COUNTIF keeps eluding all my efforts. The column which the COUNTIF is pointed to contains values of 0 to 500. Only values greater than 0 are to be counted.
View 2 Replies
View Related
Apr 2, 2009
I've got two sheet's in a workbook. The first contains data and is setup with dates in column A, day of the week in column B, and values going across by day in column's C through H. As an example it looks as follows:
View 5 Replies
View Related
Jan 19, 2012
I have a formula counting non blank cells in another sheet 'Mem' I know there are 21 entries in Column M, which it used to show as the result. Today it shows 0. The 21 entries are still there.
Code:
=COUNTA(Mem!$M:M)
The cell containing the formula is B6. The bottom bar of Excel has: Ready Circular:B6
View 2 Replies
View Related
Sep 16, 2013
I am trying to write a VBA code that does the following: The table below provides a sample of the Source (i.e how we start off with) and the Result (i.e how the format needs to look like). More specifically, for each product in 1st column that has a number in blue and or red column i need a row inserted immediately below (hence the counta function to indicate how many empty rows to insert). The end result should have a separate line for each blue/red colour depending if there is a number shown in the source data. Obviously the result should be displayed in another sheet (i.e sheet2).
PRODUCT
BLUE
RED
COUNTA
PROD A
9902
1
[Code] .......
View 5 Replies
View Related
Oct 19, 2007
I am a novice excel and VBA user, but have been working the past few days on a project to create a data entry form (using Excel 2003 on WinXP). I have the userform created and the textboxes working fine for inputting data into the spreadsheet. I also have comboboxes set up, and if I directly input data into them, they also input that data. So far, so good.
(problem)
Here is my issue: I want the comboboxes to use dynamic / variable ranges, so I have been trying to set up the ranges by defining them as names. I've come across a bunch of examples, but none of them seem to work (all produce an error that the formula is not correct or instead seem to reset the name to just the first cell when I input it).
My sheet is called Dropdown Lists, and there is a column here for each combobox. Each row in a column has the options I'd like used for that combobox. So I am basically trying to name a range as the entries in just one column.
This is what I have been working with most recently in the Name - > Define dialog box that according to everything I read -SHOULD- be working:
=OFFSET('Dropdown Lists'!$A$3,0,0,COUNTA('Dropdown Lists'!$A:$A),1)
This produces an error, that when you hit OK highlights "$A$3" - and if I remove the $ symbols, it skips then to the "$A:$A" until I remove THOSE $ symbols, and then excel will accept it, but when I go to the name, it only highlights one cell. I thought maybe that was OK, but when I tried putting the name into my rowsource, nothing happened - so apparently not.
Questions:
(main question)
- Why will this not input correctly when everything I read suggests this format? Am I not handling the space in the worksheet name correctly (with ' ')? Sometimes excel will automatically add in " " between = and OFFSET and the closing at the end, but this also has not helped. One source I read even recommended taking off the = at the start (also did not help). Am I missing something here?
(follow-up questions)
- Why are you supposed to use "$" before the cell references anyway? I've looked for an answer but haven't found one yet... is that for when you make cell references to cells on an external worksheet?
- What is the "Add" button for on the Name -> Define dialog box? I'm confused to if I am supposed to use this to add the name to the list of defined names, or just hit OK?
- At the bottom of the Name -> Define dialog box is the "Refers To:" field with the formula. On the right of that you can hit a button to go to what seems like another (smaller) formula input box. Why would I ever use that when I could just type it in on the previous box? There is no label for it so I am guessing here - but does it actually do something else (like you need to go to that smaller dialog to input new formulas and the previous box is only for -viewing- formulas, or?)?
View 9 Replies
View Related
Mar 26, 2014
The values in Cells D1, D2 and D3 are user inputs.
A formula in B16 should sum values in database (ie sum of B6 to B11)
Example :
A
B
C
D
E
1
Enter the column no
B
2
Enter the start row no
6
[code]......
Result
149
View 1 Replies
View Related
May 16, 2014
Presently I calculate a worksheet and store the result in any array the size of which is determined at the start. I then enter all the results in a worksheet and get the max and min values and numerous other data. I am trying to find a way to get the max and min values without having to enter the data to speed the routine up.
this is the code that puts the results into a worksheet.
Code:
Sub Recalculate() 'Recalculates the WorkBook
Dim Calc_
Worksheets(startSht).Select
Set Output = Application.InputBox(prompt:="Please select the 1st Output Range.", Title:="SPECIFY RANGE", Type:=8)
Set OutPutLabel = Application.InputBox(prompt:="Please select Label for
[Code]....
View 1 Replies
View Related
Feb 21, 2010
I trying to convert the following formula (I, II, III) and add criteria of Name and Date to the count values of “c”
CURRENT FORMULA
I: “=COUNTIF(C2:C3100,"
View 9 Replies
View Related
Mar 2, 2014
I'm trying to reference text from one worksheet to another. The data is all in column A on the "Template" worksheet, however the row varies (ie starts at row 5, then 7 the 9 etc). The cell row is always +2 rows on the previous row, and column A.
What can I use to pull across the cells with the information that I want, onto the "Report" worksheet?
View 3 Replies
View Related
Jun 24, 2009
Hey guys i really need your help with this one.
Basically I have a web query. In this web query the url has a part which changes to direct it to a different page with similar formatted data.
These variables that change are all in column A of my excel sheet.
So say it was http://www.google.com/search?hl=en&q=*VARIABLE*
and Variable changes according to the cell value in A1, A2 etc etc.
Right so say i set up a macro to get the data from the website, and i do some stuff to this data e.g. cop and paste it to B1. I need it to automatically change the urls variable to that of the cells below and then do the copy and pasting to the cell below (B2) it copy and pasted before(B1). Then again it change (the variable at the end of the url) to the value of Cell A3 and after its obtained that data copy and paste it below B3
Im not great with vb, like i can understand it if its infront of me but at this stage i cant write it.
Im guessing though i have to use like a counter that increases makes the variable pick it from the cell below.
Oh and i need it to stop at say when the variable reaches cell A360.
View 11 Replies
View Related
Jul 20, 2009
I would like to create a dynamic range based on a cell value. However, the cell reference may vary because the numbers of entries in the workbook can vary.
In addition to that, after the first range (eg. A1:A10), I would like to create a second range after the first (eg. A11:A20).
View 2 Replies
View Related
