(Auto)Filter With Dynamic Array For ComboBox **
Jun 28, 2007(Auto)Filter or a listbox somehow functioning like it?
Hi Excel guru's, i've got the following question:
Can I fine-tune the AutoFilter function so it filters more flexible? ....
ADVERTISEMENT
Auto Open - Sheets Array And Combobox?
Jun 7, 2011I am currently using this code to place names in a combobox (active X). How can I use an array to perform each line to all 12 months without repeating the code over and over?Here is what I have:
Code:
Sub auto_Open()
Sheets("FEB").ComboBox1.List = Array("ALL", "ACT", "ROF", "MM")
Sheets("FEB").ComboBox2.List = Array("ACTvsROF_2", "ACTvsPLN_2", "ACTvsLY_2", "ROFvsMM_2", "ROFvsLM_2", [code].....
Auto Populate 2nd Combobox Based On 1st Combobox Data
Mar 30, 2014I need to populate two combo boxes from excel sheet, the data will be like below:
Column A Column B
A 1
A 2
A 3
A 4
A 5
B 100
B 101
B 102
So from the above data, one combo box should hold unique values A & B.
On selecting a value from the 1st combo box A or B, respective values should be populated in 2nd combo box.
So the data should be like below:
If A is selected in the 1st combo box, then 2nd combo box should only show the values 1,2,3,4 & 5.
If B is selected in the 1st combo box, then 2nd combo box should only show the values 100,101 & 102.
Friends I need it in a macro and one important point is, this is dynamic and it is not static and the data can be more.
Filter An Array (the Longer One) Using The Shorter Array As The Criteria
Aug 26, 2009I am trying to filter an array (the longer one) using the shorter array as the criteria. I am currently doing this using the following method
IF(LOOKUP(lookup cell, array)=lookupcell, lookupcell, "FALSE")
I then copy and paste 'values' and filter out the 'false' to get my final result.
This has worked in the past, but for some reason that I simply can't figure out, the formula isnt working! I've attached the example, and I've highlighted a number in blue (cell E522 and C103), (that should be being found in the 'LOOKUP' function) but is returning a "FALSE". I have looked over the code and simply can't figure out why Excel isn't returning the right value.
This is obviously happening for a quite a few of my numbers, as my filter result is returning an array that is about 1500 shorter than it should be. I have highlighted E522 as the 'example cell' to look at.
Using Combobox 1 To Filter Combobox 2
Aug 22, 2008I have 2 comboboxes on a userform. In combobox1 I have a list of years which is pre-populated. In combobox2 i have some data. What i'd like to do is to sort combobox2 using the year selected from combobox1.
I have tried this slightly modified code from a different project, but cant get it to work correctly.
The code below autofilters, and selects the correct range, but will not populate the userform combobox... the highlighted row seems to be the problem:
Dim rngToCopy As Range
With Sheets("Project")
.AutoFilterMode = False
.Range("B:B").AutoFilter field:=1, Criteria1:=ComboBox6.Value
With .AutoFilter.Range
On Error Resume Next
Set rngToCopy = .Offset(1, -1).Resize(.Rows.Count - 1).Resize(, 3)
On Error GoTo 0
If rngToCopy Is Nothing Then MsgBox "No projects currently set up for the selected season!...": Exit Sub
End With
rngToCopy.Copy Destination:=UserForm5.ComboBox2.List
.AutoFilterMode = False
End With
In my data, i'd like to return columns A, B and C.
Dynamic Combobox: Listindex Of A Given Box
Nov 18, 2008I am working in excel 2003. I have a number of combo boxes, and I would like to get the listindex of a given box. It is easy to get the value of the box number "x"
Controls("Combobox" & x).value
works no problem, however
Controls("combobox" & x).listindex
does not work, and while I can do
Combobox1.listindex
I cannot figure out how to make the 1 a variable.
Dynamic Range For Combobox?
Nov 21, 2013i have a combobox(form control) that has its listfillrange property equal to a range("A1:a10") on sheet1. The combobox allows for user entry and i am trying to create code where it adds the value entered in the combobox to the range("a1:a10) on sheet1 if its not already within the list. Then set the last value used as the listindex of the combobox.
View 2 Replies View RelatedDynamic CustomUI Combobox
Jan 4, 2010I've created my menu. It has a new tab, two group, and some controls. My task is to load strings into one of the comboboxes from a list on a sheet. The id of the combobox is cmbo_ReachesCombo. I grabbed some code from Andy Pope's site that changes the text for a editbox. I tried to adapt it to my combobox, but it didn't work.
Public Sub cmbo_ReachesCombo_getText(control As IRibbonControl, ByRef returnedVal)
' Code for getText callback. Ribbon control Reaches Combobox
'
Dim R As Range
Set R = Sheets("Options").Range(Range("ReachPagesHeader").Offset(1, 0), Range("ReachPagesHeader").Offset(20, 0).End(xlUp))
returnedVal = R.text
End Sub
Combobox Dynamic Name Range
Jul 20, 2007how to control the contents of one combobox based on the selection made in another combobox. But, for some reason, ComboBoxTime1 (as shown in the code below) will only display the first item in the Dynamic Named Range when the user clicks on the pull-down arrow. The Named Range is consistent in size (4 cells) for each of the selection options in ComboBoxDay1. why only the first of four options are displayed in the second combobox?
Also, when a selection is made in the first combobox, the second combobox immediately displays the first item in the Dynamic Named Range (the one selection option it allows). I would prefer for it to remain blank until the user has selected an item from the pull-down list.
Private Sub ComboBoxDay1_Change()
Dim strRange As String
If ComboBoxDay1.ListIndex > -1 Then
strRange = ComboBoxDay1
strRange = Replace(strRange, " ", "_")
With ComboBoxTime1
.RowSource = vbNullString
.RowSource = strRange
.ListIndex = 0
End With
Else
LblTime1.Caption = "Time 1:"
End If
End Sub
Using Combobox To Filter Spreadsheet
Aug 5, 2014My goal is to be able to use a combo box on a userform to filter a spreadsheet. I need my users to select the dropdown arrow on the combobox, find the one value they need out of a list of about 50, and have the spreadsheet in the background filter based on that user selection. At this time my form has several checkboxes to filter the spreadsheet which works as expected but again, I think I need to use a combobox for this certain set of data in conjunction with the other checkboxes. Searching on the more obvious terms leads to lots of advice and code on how to filter results within a combobox, but not how to use a combobox to filter a spreadsheet.
View 2 Replies View RelatedFilter List For ComboBox
Dec 13, 2007I am trying to filter a list for a ComboBox using VB.
I have the following
Defined Name 'MemMapSel'
1stCol 2ndCol 3rdCol 4thCol 5thCol
Alarms a BOOL 2001 4000
Commands i BOOL 4001 5000
Status s INT 7001 8000
Free x DINT 9001 10000
etc
etc
I am using a combobox to select which row i require and am mapping the 4thCol to a cell
At present the property 'ListFillRange' is set to 'MemMapSel' displaying all 5 columns and bounding column 4 as the value
What i really need is to Filter this list, so that the combobox only displays the BOOL entries in the 3rdCol, or the INT, etc
I think i can use the Select function to do this, but i am not sure how to go about it.
Dynamic Chart - Control In Combobox
Jan 30, 2014Trying to create a dynamic chart herewith control in combo box.
Chart 2.xlsx
Cascading Combobox And Dynamic Ranges?
Aug 21, 2013I want to create a cascading combo box from some values that I have, ill explain how I approached it.
Cascading combo box is a combobox which values are obtained depending on the answer of a previous combo box.
So I set up a little table like so:
Categories Car Train Bike
Car Mercades First Honda
Train Ford Western Ducati
Bike Skoda Red Suzuki
and the combo boxes would be set aside from that.I collected the data in Named Ranges (A Range for Categories, A Range for Car, A Range for Train...)
The first data validation box contains = Categories the second data validation box contains =INDIRECT($C$2) (Where C2 was the range of the first validation box)
Once this was working, I decided to change the formula for the named ranges to allow me to add more values.
The formula was: =$F3$F8
I changed it to: =OFFSET($F$3,0,0,COUNTA($F3:$F96),1)
I expected this to work however, it just doesnt.... when clicking on the drop down arrow for the validation box, nothing happens. No box or values or dropdown.
Dynamic List In Combobox For Userforms
Jan 16, 2012I have created a userform where I have a combo box and an options box. I want the combo box to reference a specific list of values. And if the check box is selected, I want the same combo box to reference a different list of values. This is the present syntax I am using. For some reason, The value of the check box does not alter the list in my macro.
Private Sub Userform_Initialize()
If chkHeader.Value = True Then
cmbSort1.Clear
With cmbSort1
.AddItem Range("A1")
.AddItem Range("B1")
.AddItem Range("C1")
[code].....
Set ComboBox RowSource To Dynamic Range
Oct 25, 2007I am unable to reference the combobox's rowsource to another sheet dynamically
The codes below are initialized when the userform is loaded. Is there anything wrong with it?
Private Sub UserForm_Initialize()
combobox1.RowSource = sheets("testing").Range("L2", Range("L65536").End(xlUp)).Address
End Sub
Filter Results Using Combobox On Spreadsheet?
Feb 9, 2014I want to filter my results using a combo box on my spreadsheet. I don't mind how this is done, even if it just hides all of the information which isn't relevant. I've done it with a VLookup but I want to be able to edit it easily without the formula popping up. So if you click Barlcays, only barclays appears. I'd also like a button to reset if possible. I've attached an example of how I sort of want it to work.
View 3 Replies View RelatedFilter A Listbox From The Selection In A Combobox
Dec 9, 2009Is there a way to filter a listbox from the selection in a combobox?
View 2 Replies View RelatedCombobox To Filter Data In Excel?
Mar 19, 2013I have a table of data and would like to filter it based on the combo box selection so that only those results which match the combo box are displayed.
E.g.
WARD
MONTH
YEAR
[Code]....
WARD, MONTH, YEAR will be combo boxes through which the records below will be filtered.
I want to attach a sample but not sure how to
Filter Column Using ActiveX Combobox?
Aug 1, 2013I am trying to use a combo box with a defined list I have in another worksheet.
I was able to name and populate the list into the combo box, but am trying to work a macro into it.
I have a large data sheet with with many columns. In this worksheet, I also placed the combo box. What I would like to do is to be able to click on a name in the combo box and have it filter Column H, where there are many data points.
For example, In column H I have Apples, Watermelons, Peaches, etc.
In the combo box list, I would like to click on Apples and Column H list only the Apple names. Then if I want to click on Watermelons, it would filter Column H to only those which have Watermelons listed...
Populating Combobox In Userform - How To Filter
Mar 22, 2014I have a Userform where I use a ComboBox to populate raw A from a worksheet.
I use this form to update new data that relates to the selected item in the ComboBox.
In that user form, when I select an item from the ComboBox, I idetifay it's raw and display the data from columns B,C...to I in text boxes on the Userform.
I then set the "Enable" property of the text boxes that has data to "False" so that field cannot be updated again.
What I do today is if all the fields where updated, a message box will say "All fields are full" and I clear the form.
Now I want to improve my selection by removing items from the ComboBox if all the "needing update" columns are field.
By this I want to filter out the items that where already updated before and only show the ones needing update.
Here is what I have, I need to change the UserForm_Initialize section so it will only show the rows needing update.
Code:
Private Sub UserForm_Initialize()
'Populate "Cards" Combobox.
Dim rngCards As Range
Dim ws As Worksheet
Set ws = Worksheets("Rejects")
[Code]..
Use Combobox Text To Filter A Listbox
Sep 18, 2006I'm trying to use 2 combobox's to filter a listbox with 7 columns. I need to match the 1st 3 chars. and the last 2 chars of the 1st column field to filter the list that displays in a listbox on a form. Is there an easy way to do this? I tried working with the autofilter, but couldn't get rid of the dropdown selection arrows.
View 2 Replies View RelatedActiveX Combobox With Dynamic Linked Cell?
Feb 4, 2012I have a golf teetime reservation spreadsheet. For each tee time there can be up to four players names so I use 4 columns. Times are listed in rows every 10 minutes beginning 6am until 5pm for a total of 66 rows per day. I have a member/customer list that I have on a separate sheet that I've named. I am using the ActiveX combo box next to each possible entry (so 4 columns times 66 rows = 264 combo boxes). It's a little slow and takes a long time to open. I like the ActiveX combo box because it allows me to define the box format and display and it allows search/read/write capability. The idea is the customer calls, I ask what time they want and we arrive upon an available time. I ask for a last name, I click the combo box, type the first letter of the first name and then scroll if necessary to the name and click it to add the name to the time/player cell. If no name in my list we simply type it in and I'll capture it next time I refresh my customer list.
way to dynamically define the linkedcell in the properties so that instead of 264 combo boxes, I might have one combo box that I can click on and then direct my selection to the cell I want it to go into.
Dynamic Range In UserForm Listbox/ComboBox
May 21, 2008How can I fill a UserForm ComboBox or ListBox with cells from a dynamic changing range?
View 3 Replies View RelatedDynamic Advanced Filter
Jun 21, 2006I am trying to create a function using vba and the advanced filter function.
The spreadsheet I am using changes from week to week so it can have different amounts of columns and also rows.
This is my code.
Sub FilterCGML()
Dim rngToFilter As Range
Dim rngFilterCriteria As Range
Dim LastRow As Long, LastCol As Integer
With Sheets("Main FTE")
Range("b2000").Value = "Cost Code"
Range("b2001").Value = "5*"
It works ok if I have values in columns A:X but if for example I only have information in A:S I get a runtime error.
I know how to find the last column and last row by using
LastRow = ActiveSheet.Range("A" & Rows.Count).End(xlUp).Row
LastCol = Range("IV1").End(xlToLeft).Column
But I don't know how to modify my code to use these.
Combobox Auto Complete
Jan 18, 2003I have a worksheet named, "Database2". There are hundreds of names in colum B starting in row 3 of this worksheet.
In the same Workbook is a worksheet named, "Records". I want to create a userform with a combo box, an "Enter" and "Cancel" command button. When typing begins in the combo box I need it to recognize the name from the "Database2" list in colum B and executes auto complete. When the "Enter" button is clicked I need it to enter the name in the first available row in colum B starting in row 3 in the Worksheet named "Records".
Filter Multi Data Using Combobox And Checkboxes?
Apr 19, 2014i have a data sheet i want to filter my multi data using combobox and checkboxes,,,
checkbox filter data what value is in the combobox,
Filter Listbox With Combobox And Search Button
Aug 4, 2014Attached small application. Open the application and click on the LISTBOX button. Code for the Filter by Item button or the Filter by Representative button. I would like to select an item from either of those dropdowns in the search box, click on the relevant button and the list box will populate to show the results.
For example, if I were to select Chocolate Bars from the dropdown and click filter by item, I want to see only the three lines [i.e. line 2, 6 and 7] present in the listbox, and I want to be able to doubleclick on any of those lines to go to the record if I wish.
Similarly, if I select Robert from the other dropdown and click Filter by Representative, I want to see the relevant three lines [i.e. 4, 5 and 8] relating to Robert, present in the listbox, where I can again double click to go to the record [i.e. the data entry userform related to particular record selected.
I have attached a file : Form.xlsm
Excel - Combobox To Pivot Reporting Filter Through VBA
Oct 27, 2012I have linked Combo Box to Pivot Reporting Filter through VBA. When I Select Combo Box Value, same will be filtered in Pivot table. Combo Box values are constant where as Pivot report filter may not contain all the values which are in Combo Box. If Combo Box value is not available in Reporting filter of Pivot it should throw up msgbox and should select first value of Combo box.
View 3 Replies View RelatedFilter Named Lists For Use In ComboBox/Drop-down Box
Aug 29, 2006I have a workbook that lists a number of customers and the products that they use. I am trying to create a lookup that will follow the following process;
1 - User enters (via dropdown selection) Customer Id
2 - User enters (via filtered dropdown based on the 1st selection) Product
3 - User enters (via filtered dropdown based on the 1st and 2nd selections) Pack Size
4 - Product Id autofills itself.
My problem is twofold, firstly I don't know how to perform the "filters" in stages 2 and 3, and secondly I want to remove duplications from all lists at the appropriate times.
Filter & Copy Based On ComboBox Choice
Nov 14, 2006I have 2 work sheet
First sheet is "Department "
11 Departments
Second sheet is "Designation "
20 Designation
i have generated VBA form
but..now in this form i want to create 2 input options..
1)select department (capture all depts. from Department sheet. if i select HR Department then in 2nd option all HR Designation should be copied