I have a form with two buttons, one is to start downloading, one is to stop it, a sub is called when start buuton is clicked, there is a DO LOOP, I hope the DO LOOP stop when I clicked STOP button,
View 9 RepliesI have a multiple select listbox on sheet1 and I have changed the colour to match the rest of the report. The problem is that when the listbox is clicked the selection is highlighted but I have set the Liststyle to 1 so there is a checkbox which shows that the item has been clicked.
Is there a way to remove the highlight leaving only the ticked box?
my excel sheet runs through a lot of calculations, opens Flowmaster, a simulations program, passes on data, receivs data and so on. Is there any way to have a user input to stop the whole simulation. During the first tries I had a lot of break point in my debugger. But now I want to have a button to hit or better just some keys to hit to stop it without using the ctrl+alt+del which closes everything.
View 4 Replies View RelatedI have a spreadsheet with a variable number of xlButtonControl type form controls. The actual number of buttons depends on the amount of data that the spreadsheet is being asked to summarise. All the button controls use the ".OnAction" property to point execution on click to a common procedure.
Unfortunately that much is what it is and is beyond my control, so I just have to work with that.
What I would like to know is if there is a property or method I can access from within the common OnAction procedure that enable me to identify which button was pressed. If this was a CommandBar environment I would use the ActionControl property. Since it's not, and since I can't change it (not even to use ActiveX controls!), does anyone know an equivalent that I can use in this case?
I have several buttons which, when clicked, pull up a range of data from another tab. Each button repopulates the appropriate cells with its specific data. I need to have an identification of which data set I'm currently viewing so was considering having the button, when clicked, change color or background/lettering colors swap, etc, until another button is clicked, then it changes color and the original button returns to the standard format. Is this possible? What type of button do I need to use?
View 1 Replies View RelatedIs there a way in VBA to reference the activeX button which has been clicked? Like a ThisWorkbook equivalent for a button?
I have quite a few button whereby they set a parameter for a procedure 'TrendData' based on the row they sit in. Currently I just have the row number hard coded i.e. Call TrendData(5) but I want to amend this so that when I add a row it doesn't offset all my buttons.
For Example
Call TrendData(CommandButton3.TopLeftCell.Row)
However instead of typing CommandButton3, CommandButton4, etc. I would like the code to know which button had been clicked and just use that?
There was a similar question I found answered in the archives. However the solution given there (using ActiveSheet.Buttons(Application.Caller).TopLeftCell.xxx) does not work in my case.
A little googling and I think the reason is that I added my buttons from the toolbar and not from the forms editor. My buttons are in the OLEObjects collection, not in Buttons.
So how do I determine which of my OLEObjects was clicked? Is there something similar to "Application.Caller"?
I need a code for "click-able button" in my excel sheet that will call makro "copy" which I have connected with ThisWorkBook /Sub copy() .../ or in other case with Modules (module 7 for example).
So, what to add between this:
Private Sub CommandButton1_Click()
?
End Sub
Sub Mainscoresheet()
Dim k As Integer, i As Integer, cs As Integer
Set b = ActiveSheet.Buttons(Application.Caller)
With b.TopLeftCell
cs = .Column
End With
I have a button assigned to this macro about 20 times all over my worksheet
I will place the button in dirrerent locations. What I need to do is get the column that the top-left corner of the button and assign that to "cs".
Example if the top left corner of the button is in column "F" then cs would be 6.
I have two custom toolbar buttons. I want to disable one of them until the second will be pressed (sorry for my english).
View 3 Replies View RelatedI have a command button that when pressed I would like the name written on it and colour to change
View 2 Replies View RelatedI can't find a way to reset/clear the textbox in order to enter new data
View 2 Replies View RelatedCurrently I have 5 identical command buttons which do something similar but in a different cell.
What i want to do is sum up the 5 different task using a single command button.
When cmdaddsp1 is clicked the first time cell "B4" is populated with a value from a table.
When cmdaddsp1 is clicked a second time cell "B5" is to be populated with a value from a table.
When cmdaddsp1 is clicked a third time cell "B6" is to be populated from the table,
and so forth.
Is there a loop or anything that can be used for this? I only want other cells to be populated when the command button is pressed.
i want to create a button in excel worksheet that when clicked copy values from a column (say A1 to A25) and store it so that it can be copied to word file or notepad or even in other excel worksheet. so i think i need a macro for this or it can be done by writing VBA Code.
View 9 Replies View RelatedI am looking to create a form that when a user enters data in it, and clicks a save button it will submit that data into cell A2, and then with the next time the enter data it will submit that data to cell A3. I would like it to continue moving down a cell each time somone hits a "submit" button.
View 6 Replies View Relatedcode to pull a hidden frame when I click a command button. I have Uploaded a Sample worksheet on my requirement.
View 4 Replies View RelatedI have a form (worksheet with controls embedded in) and the form changes color depending on what the user clicked, problem is that button colors and cell pattern colors don't quite match.
thought I solved it by making the buttons backstyle = transparent.
However, as soon as radio button was clicked, transparency was lost.
I have named the range of the form "FormGround" so that when Service 1 is select, the Form turn a different colour. I have my subsequent buttons change to that same color as well (using the cell's color index number.
I am having difficulty finding information on coding my spin button on a user form. I searched and haven't found any information. I need to do is code a spin button to increase or decrease by 1 each time it is clicked up or down. I would like it to populate to a text box on my form if that is possible.
View 3 Replies View RelatedI currently have a small userform placed at the bottom right of the screen (with a command button on it) and this opens up on top of excel instances and other applications/windows and it is set so that you can't interact with anything except the userform.
I wanted to minimize the userform and give focus to immediate next window (can be excel or non excel applications) for 10 seconds and then activate/show the userform back again, when the "Button 1" on the userform is clicked.
I tried hiding the userform, but this doesn't give focus to the immediate next window. Below is the code
Private Sub Button_Click()
Me.Hide
PauseApp (10)
Me.Show
End Sub
I could only find answers for adding minimize and maximize buttons to userform.
When the button is clicked, it should perform
Step a - Minimize the userform
Step b - Give focus to the next immediate window behind the userform
Step c - Wait for 10 seconds
Step d - Bring back the userform its to state.
Can a event be triggered when the Visaul Basic Editor command button is clicked in Excel?
I have a userform that has a combobox in it that also has an OK button and a Cancel Button. Need getting the combobox to pull in the correct list? The data for this list will be in cells A2 through A16. But not all 15 lines will always have data in them so I'd like to only show the ones with data. Then next issue i have is I would like the OK button on this userform to actually erase the data the user has clikced on in the combobox. It's a list of kids that the userform is asking which one needs to be deleted. So it might be the kid in cell A9. so when the user clicks on that kid in the combobox form a9 and hits ok I'd like to have all the kids below A9 move up one row.
Windows XP
excel 2003
I'm trying to get a looped function to continue down a worksheet until a specific column has no data in it. My code is below, and it works great for doing what I want it to do (copy a row and continue pasting it every 3 rows down until the row where Column E has no data in it) but it doesn't stop at the end of the data:
HTML Code:
Sub Test2()
' Select Row 11, *first line of data*.
Rows("11:11").Select
Application.CutCopyMode = False
[Code] ....
I enter 1 record using the form, the next records does not populated correctly. It looks like the code just keeps looping by ....
What I am trying to do is create a chart for each row in my raw data - the rows does change on a week to week basis as we are comparing stores
My raw data is: (I would post data although its too wide
Column A - New Store
Column B - Like Store
Column C:N - New Store Sales
Column O:Z - New Store SOH
Column AA:AL - LIke Store Sales
Column AM:AX - LIke Store Sales
I am trying to loop my code so that it creates a new chart for each row....although the loop keeps going and it doesnt move down a row each time
my code is:
Range("A1").CurrentRegion.Select
rnum = Selection.Rows.Count
Range("C2:N2").Select
For i = rnum + 1 To Rows.Count
If rnum >= 1 Then
Charts.Add
ActiveChart.SetSourceData Source:=Range("'CHART RAW DATA'!$C$2:$N$2").................
im trying to use a loop to open each file within that folder. My problem is it keeps looping and only opens the same file -
my code is:
'Enter names of files within C:Temp in activesheet
Dim myDir As String, fn As String, txt As String, myList
myDir = "C: emp"
fn = Dir(myDir & "*.xls")
If fn = "" Then Exit Sub
Do While fn ""
txt = txt & vbLf & Left$(fn, InStrRev(fn, ".") - 1)
fn = Dir
Loop
I've got this code to display a certain cell from multiple files, and functionally it works, but I get a out of stack space error after it runs for a while. I'm sure this is because the loop doesn't know when to stop, which I thought would be solved by having " Do Until sBook = "" " instead of Do; however, then the code will not run at all.
Private Sub Worksheet_Calculate()
Dim sBook As String
Dim sFilePath As String
On Error Resume Next
Application.EnableEvents = False
Roe = 3
Do
I have the following code that gets stuck in the Loop and will not stop unless I press the Esc key:
Sub WIP()
Dim ws1 As Worksheet, ws2 As Worksheet
Dim lastrow As Long
Dim newRow As Long
Set ws1 = Sheets("PAYCALC")
Set ws2 = Sheets("WIP")
Application.ScreenUpdating = False
With ws2
.Range("A2:C" & .Range("A2:C2").End(xlDown).Row).Clear
End With
x = 10
lastrow = ws1.Range("C5").End(xlUp)
Do
newRow = ws2.Cells(65536, 1).End(xlUp).Offset(1, 0).Row
ws2.Cells(newRow, 1) = ws1.Cells(x, 2).Offset(-2, 0).Value
ws2.Cells(newRow, 2) = ws1.Cells(x, 2).Value
ws2.Cells(newRow, 3) = ws1.Cells(x, 2).Offset(3, 0).Value
x = x + 21
Loop Until x >= lastrow
There's a twist to this. I have the same identiclecode in a different module. The only difference is ws2 is different and there are 7 newRow's. Other then that the two are the same.
That one works just fine without getting stuck. It will go through 200+ sets of records and stop when it reaches the last one.
The one above will not stop even though I just put in three records on ws1 for testing.
I made six macros, then I inserted a row at "A1" and created a box icon for each and assigned the macros. I went to the properties and told them not to print. Now I set my print range from "A3: J10" and they still print and show up in the print preview also.
View 2 Replies View RelatedThe loop is supposed to stop when the cell that is 4 columns to the left, in the workbook named "Complete DSS", changes numbers.
/ This is the cell ref. / This is the original
Do While ActiveCell.Offset(0, -4) = ThisTape
The number will stay the same for a while until it changes tapes, then it Should stop when they are no longer equal.
It used to work, but maybe some recent changes have messed up the function.
Sub Compare_printout_2_WDMS()
Application.ScreenUpdating = False
Dim ray, sht As Worksheet, Exist As Boolean
Dim BookA
Dim I As Long
I = Worksheets.Count
AreaNum = InputBox("¿Que es el Area?")
ThisTape = Range("C8").Value
ActiveWorkbook.SaveAs Filename:="C:Documents and Settingssmith27DesktopArea 319 printoutsArea " & AreaNum & " " & ThisTape & ".xls"
Columns("A:A").insert
LR = ActiveSheet.Range("B65536").End(xlUp).Row..........................
I have a piece of code that put a check in all checkbox in column B from row 5 to row 50 but in column C, I have data from row 5 to 38. I want the macro to stop at row 38 in column B. When the cell in column C is empty stop putting checks in column B. How can I make this macro Check all checkbox down column B and stop when column C is empty. How do I add a loop to stop when the cell in column C is empty?
Private Sub CommandButton1_Click()
Dim CB As Variant
For Each CB In ActiveSheet.CheckBoxes
CB.Value = False
Next
End Sub.......