I have a data on sheet1 which goes from A2:T unlimited, I already have a macro that enables me to pull data from A2:T2 that then collates to sheet2, but I need it to then go to the next populated row which will be A3 and collate the data then progress onwards until final row.
View 2 RepliesFound the below code that Dims r as 1. This would work fine if my data began from A1. I want to apply the search and filter from A18 onwards. On attempting to change R to 18 it worked with the exception it did not filter the last 16 lines (They should not have appeared).
[code]Sub Show_Only_Name_AinU_Balance()Dim r As Long 'rows to checkDim Hiders As Range, Found As RangeDim Cond As String''The Name you want displayed is from cell E5Cond = Worksheets("CLSSI Home").Range("E5").Value'Sheets("AinU Balance").SelectApplication.ScreenUpdating = FalseCall Show_All 'Unhide previous names if anyFor r = 1 To ActiveSheet.UsedRange.Rows.CountSet Found [code]....
Im consolidating datas from muliple excel files to single data base excel file.Am having macro and it is working fine for me.But when am loading data to data base file the excel files are vibrating.To avoid this issue i want to Set the progress bar which should indicate the progress of the data loading.
View 12 Replies View RelatedI am looking to collate Data of Peoples Activities from their status and duration. I would like to have a table where I would be able to see each agent name, their status and how long they took in each one. e.g.
Name | Status | Total Time
Humpty Dumpty | NotReady | 0:15
| Wait | 0:12
I have attached a sample worksheet of data, if anyone can guide me as to how i can do this also if this can be done through a macro, that would be alot easier as i have to collate atleast 200 peoples activities.
I would like to put all my data from many workbooks into one workbook. all the columns will be the same but the rows will be different.
If possible I would like the file name in "f"
The file location on the file is C:Userssteve.kirkDocumentsbompartsdn. this is where all the files are
CQ821-004 Earth brush bracket - Fabrication.xlsx‎
I always copy data from all tabs to a single tab. I am looking for a macro which does this and saves time. Criteria is Data starts from Col B to Q not further in all tabs, but the rows will vary in all tabs.
View 13 Replies View RelatedI developed a database for tracking our Search and Rescue activities on an annual basis; this usually involves ~140 calls per year. Amongst other things, we log the time the call came in. The time is entered in numbers format, not text, as I couldn't figure out how to get a time range (09:30, etc.) to work. It's like military time...0015, 0945, 1730, etc., so in numbers format, 0930 comes out as "930", 0030 as "30", etc. I developed a tracking column in one hour increments...0000-0059, 0100-0159, etc. Each time a call is entered and the time logged, I'd like to keep a sum total down in the time range column...so a call received at 0930 would end up in the 0900-0959 box. Among other things, I tried formatting with, "=COUNTIF (range:range, ">0900, <0959") but that doesn't work.
View 3 Replies View RelatedI have multiple excel files with a form popping up whenever these files are opened (form has been called in Workbook open function). I need to collate data from these multiple excel files without opening these files. Can somebody help with a sample code?
View 9 Replies View RelatedEvery month we collect data from a number of employees and average it out in a new excel workbook ready for analysis. Each employee sends in their monthly data, structured identically, with only the numbers in the data tables different.At the moment, we just copy and paste every single data return into the separate worksheets of a single workbook, and on the front page of the workbook we create a simple formula which adds the equivalent cell in each sheet together to get a total. Its not hard to do, but its very lengthy as a process.What I've been researching, is the possibility of a macro that can automatically send the outputs of separate workbooks into one central workbook, so that we don't need to go through the copy and pasting of each return every month.
E.g, Say I have 10 workbooks, named Book1, Book2, Book3 etc, which each have a number ranging from 1 - 10 in cell A2. Could A macro be designed to bring all those values together into cell A2 of an 11th workbook, e.g one entitled book11? I'm aware that said Macro may need to exist in each separate workbook in order for the process to be carried out.
I want to use a msgbox as a progress indicator for a routine in an application. I cant figure out how to do this.
View 5 Replies View RelatedI'm trying to collate data from two sheets (sheet1 & 3) , paste it on sheet5 and do some calc. But the macro keeps copying the same row after 2 iterations. Also the find function stops working after 1st iteration. Not sure what to do
Sub Macro17()
'
' Macro17 Macro
'
'
Sheets("Sheet1").Select
Range("B3:L3").Select
Do Until Selection.Row = 10000
Selection.Copy
[Code] .........
Have some code I have found from this site shown below. It works great however I need some help in editing it to change what it does. Basically the code currently takes all the data from set cells from all sheets after a set point and adds a new sheet and copies data from each of the sheets between this point and the new sheet and then pastes it to this final sheet.
What I wish to change is I already have a sheet which I will be using to analyse data from so how would the code look to be able to point to such a sheet within the same workbook? The sheet will be within the first 2 sheets of the workbook so from the code below you can see I have already set it to not include this sheet. I wont be needing a new sheet to be created at the end, I just want the data to paste to my analysis sheet which we can call "analysis".
Most excel/vba books say not to use the sumif function.
I have a very large workbook (9meg) and cant use VBA code as it slows down the interation calculations required.
I have used the sumif function to find and collate unqiue data on different worksheets.
Is there another function that i should be using?
I have as an example two products. One called PORAW VC and the other PORAW WC30
I need to extract from the 7th character (in this case) to the end of the string. The string length always changes and to complicate matters some products dont have a space in their name.
eg PORTP060DUS ( here I want to extract just the 060DUS )
PORAW VC (Just need to extract VC)
PORAW WC30 (Just need to extract WC30)
I suppose this is some sort of dynamic extraction
I have code which will hide columns L to AA if cells are empty. It works fine.
I want to modify it to consider rows 3 onward down. It means even if rows 1 & 2 are populated and row 3 onwards down are empty, then it will hide it.
I tried but it is not working .....
I want to put progress indicator for data input in Excel.
The data input is in cell A1 until A10, and B1 until B10.
So, I need two progress indicator (for cell A & B).
we have 1500 workbooks where the format is the same but the data could be different. I have marked up in red which i would class as headings, the rest in black are varibles
sheet 2 is how i would like it if possible. please note the file name is need to be in column A
can a macro be written to get all 1500 files into one. all the files are in one folder
Is there a way to collate multiple entries for the same record all into one column, as shown in the attached workbook?
View 12 Replies View RelatedMacro to collate four workbooks into single workbook.
Sheets in workbooks also to be copied. The sheet 1 of the 4 workbooks should be combined into the sheet 1 of the new workbook. Sheet 2 of the 4 workbooks should be combined into the sheet 2 of the new workbook, and so on.
[URL] ..........
I have created an Excel Spreadsheet to capture essential information pertaining to a project within a programme. I have used Excel 2003 and protected the sheet with the password ‘Secret’ and the file can be downloaded here: [url]
I now have a number (30 or 40) of these filled out for each project.
I now need to be able to extract the data, specifically the resource profile. I want to be able to run a macro that will open each spreadsheet in a directory and extract the data and populate the spreadsheet ‘Collated Output’ which can be found here: [url]
The data needs to be appended into the table but ignore empty rows. I created the template in such a way that each section has a static range of cell references.
The Template allows the user to change the start month of the resource profile so that needs to be taken into account when extracting the data so that the profile is aligned to the correct month.
I have a few hundred multi sheet workbooks that have address data in one of the sheets that I wish to collate into a single worksheet to use as a mail merge with word.
View 5 Replies View RelatedI have approx 850 workbooks with different names. In each workbook there are unique cells that I need to collate into rows in another separate workbook. For example:
Workbook named ABC123 - on the sheet named �cover sheet� I need to record the information from cell�s A1, C3, D3, C37 and D37. Into another workbook called record book. I need each row in the record book to unique to the individual workbooks. For example information from ABC123 will be recorded in row 2 of the record book while information from ABC456 will be recorded on row 3 and so forth.
I have been opening each book and copying and pasting each cell (my fingers are killing me) into the record book. Just thought somebody may know another way. Not familiar with vba or even how to insert it into excel.
I have approximately 5000 excel files in a folder with which are named by cost centre e.g 45684 (all differing lengths).
some script so I run a macro and an excel sheet captures the name of every single excel file in the folder?
I would like to have a progress bar in some of my userforms.
As an example I attach a sample. progress bar.xlsm‎
Im forgetting how to code something for this ....
View 7 Replies View RelatedI'm trying to come up with an efficient formulae or function to calculate tax
The problem I have is that the tax is progressive. As below
the first 20,000 is taxed at 5%
the next 20,000 is taxed at 6%
the next 20,000 is taxed at 7%
the next 20,000 is taxed at 8%
the next 20,000 is taxed at 9%
more than 100,000 is taxed at 10%
I'm trying to do a formula like below
Cell B3 is my taxable amount
Cell B5 =IF(B$3>20000,20000*0.05,B$3*0.05)
Cell B6 =IF(B$3>40000,40000*0.05,(B$3-20000)*0.05)
This gives me a problem in that for 35k say, I end up with a negative number for the second part in cell B6. My other issue is that each calculation will take up 6 rows on my
spreadsheet. I was hoping to set up a function that could do this in a cell, but even the simple stage defeats me at the moment.
I struggling in progress bar code, Once userForm.show code executes code execution stops, Once if i close the userform at runtime step wise code continues from next line in this case i mean UserForm.ProgressBar1.Min = 0
Sub test()
UserForm.Show
UserForm.ProgressBar1.Min = 0
UserForm.ProgressBar1.Max = 100
[Code]....
There is a nice progress bar at
http://www.dailydoseofexcel.com/arch...-and-controls/
Sub DoStuff()
Dim ufUpdate As UUpdate
Dim dtTime As Date
'instantiate the userform
Set ufUpdate = New UUpdate
ufUpdate.lbxStatus.AddItem "Starting Process..."
ufUpdate.lbxStatus.AddItem "Do the next thing..."
ufUpdate.lbxStatus.AddItem "Done!"
ufUpdate.Show....................
I have a code that has a loop with up to 100,000 possible iterations. The max number of iterations, N, is variable and to be specified by the user via user form.
That's why I like to show only incremental progress , say 5% competed , 10% completed ,... , so on. What is the best way to code it?
Another question: I tried to show it via
Application.StatusBar = Format(PctDone, "#.##%") & " completed"
but for some reason it does not get updated while the code is running. Is that because the user form is visible? For now, I'm trying to add a label progress bar to the user form, but StatusBar would suffice.
I'm using a mostly recorded macro to do some rather lengthy formatting in a workbook. The formatting is lengthy enough that I don't want people to think the PC is hung. So I'd like to use the progress bar. I'm trying to trim the code down to just the bare essentials for running the progress bar during the macro procedure (and so I can better understand what's happening in the code). The attachment shows what I've done so far. When I press the "Format Workbook" button then I have to press another button ("Run Progress Meter") to really launch the progress bar.
View 5 Replies View Related