I always copy data from all tabs to a single tab. I am looking for a macro which does this and saves time. Criteria is Data starts from Col B to Q not further in all tabs, but the rows will vary in all tabs.
View 13 Replies
I am looking to collate Data of Peoples Activities from their status and duration. I would like to have a table where I would be able to see each agent name, their status and how long they took in each one. e.g.
Name | Status | Total Time
Humpty Dumpty | NotReady | 0:15
| Wait | 0:12
I have attached a sample worksheet of data, if anyone can guide me as to how i can do this also if this can be done through a macro, that would be alot easier as i have to collate atleast 200 peoples activities.
I would like to put all my data from many workbooks into one workbook. all the columns will be the same but the rows will be different.
If possible I would like the file name in "f"
The file location on the file is C:Userssteve.kirkDocumentsbompartsdn. this is where all the files are
CQ821-004 Earth brush bracket - Fabrication.xlsx‎
I developed a database for tracking our Search and Rescue activities on an annual basis; this usually involves ~140 calls per year. Amongst other things, we log the time the call came in. The time is entered in numbers format, not text, as I couldn't figure out how to get a time range (09:30, etc.) to work. It's like military time...0015, 0945, 1730, etc., so in numbers format, 0930 comes out as "930", 0030 as "30", etc. I developed a tracking column in one hour increments...0000-0059, 0100-0159, etc. Each time a call is entered and the time logged, I'd like to keep a sum total down in the time range column...so a call received at 0930 would end up in the 0900-0959 box. Among other things, I tried formatting with, "=COUNTIF (range:range, ">0900, <0959") but that doesn't work.
View 3 Replies View RelatedI have multiple excel files with a form popping up whenever these files are opened (form has been called in Workbook open function). I need to collate data from these multiple excel files without opening these files. Can somebody help with a sample code?
View 9 Replies View RelatedI have a data on sheet1 which goes from A2:T unlimited, I already have a macro that enables me to pull data from A2:T2 that then collates to sheet2, but I need it to then go to the next populated row which will be A3 and collate the data then progress onwards until final row.
View 2 Replies View RelatedEvery month we collect data from a number of employees and average it out in a new excel workbook ready for analysis. Each employee sends in their monthly data, structured identically, with only the numbers in the data tables different.At the moment, we just copy and paste every single data return into the separate worksheets of a single workbook, and on the front page of the workbook we create a simple formula which adds the equivalent cell in each sheet together to get a total. Its not hard to do, but its very lengthy as a process.What I've been researching, is the possibility of a macro that can automatically send the outputs of separate workbooks into one central workbook, so that we don't need to go through the copy and pasting of each return every month.
E.g, Say I have 10 workbooks, named Book1, Book2, Book3 etc, which each have a number ranging from 1 - 10 in cell A2. Could A macro be designed to bring all those values together into cell A2 of an 11th workbook, e.g one entitled book11? I'm aware that said Macro may need to exist in each separate workbook in order for the process to be carried out.
I'm trying to collate data from two sheets (sheet1 & 3) , paste it on sheet5 and do some calc. But the macro keeps copying the same row after 2 iterations. Also the find function stops working after 1st iteration. Not sure what to do
Sub Macro17()
'
' Macro17 Macro
'
'
Sheets("Sheet1").Select
Range("B3:L3").Select
Do Until Selection.Row = 10000
Selection.Copy
[Code] .........
Have some code I have found from this site shown below. It works great however I need some help in editing it to change what it does. Basically the code currently takes all the data from set cells from all sheets after a set point and adds a new sheet and copies data from each of the sheets between this point and the new sheet and then pastes it to this final sheet.
What I wish to change is I already have a sheet which I will be using to analyse data from so how would the code look to be able to point to such a sheet within the same workbook? The sheet will be within the first 2 sheets of the workbook so from the code below you can see I have already set it to not include this sheet. I wont be needing a new sheet to be created at the end, I just want the data to paste to my analysis sheet which we can call "analysis".
Most excel/vba books say not to use the sumif function.
I have a very large workbook (9meg) and cant use VBA code as it slows down the interation calculations required.
I have used the sumif function to find and collate unqiue data on different worksheets.
Is there another function that i should be using?
we have 1500 workbooks where the format is the same but the data could be different. I have marked up in red which i would class as headings, the rest in black are varibles
sheet 2 is how i would like it if possible. please note the file name is need to be in column A
can a macro be written to get all 1500 files into one. all the files are in one folder
Is there a way to collate multiple entries for the same record all into one column, as shown in the attached workbook?
View 12 Replies View RelatedMacro to collate four workbooks into single workbook.
Sheets in workbooks also to be copied. The sheet 1 of the 4 workbooks should be combined into the sheet 1 of the new workbook. Sheet 2 of the 4 workbooks should be combined into the sheet 2 of the new workbook, and so on.
[URL] ..........
I have created an Excel Spreadsheet to capture essential information pertaining to a project within a programme. I have used Excel 2003 and protected the sheet with the password ‘Secret’ and the file can be downloaded here: [url]
I now have a number (30 or 40) of these filled out for each project.
I now need to be able to extract the data, specifically the resource profile. I want to be able to run a macro that will open each spreadsheet in a directory and extract the data and populate the spreadsheet ‘Collated Output’ which can be found here: [url]
The data needs to be appended into the table but ignore empty rows. I created the template in such a way that each section has a static range of cell references.
The Template allows the user to change the start month of the resource profile so that needs to be taken into account when extracting the data so that the profile is aligned to the correct month.
I have a few hundred multi sheet workbooks that have address data in one of the sheets that I wish to collate into a single worksheet to use as a mail merge with word.
View 5 Replies View RelatedI have approx 850 workbooks with different names. In each workbook there are unique cells that I need to collate into rows in another separate workbook. For example:
Workbook named ABC123 - on the sheet named �cover sheet� I need to record the information from cell�s A1, C3, D3, C37 and D37. Into another workbook called record book. I need each row in the record book to unique to the individual workbooks. For example information from ABC123 will be recorded in row 2 of the record book while information from ABC456 will be recorded on row 3 and so forth.
I have been opening each book and copying and pasting each cell (my fingers are killing me) into the record book. Just thought somebody may know another way. Not familiar with vba or even how to insert it into excel.
I have approximately 5000 excel files in a folder with which are named by cost centre e.g 45684 (all differing lengths).
some script so I run a macro and an excel sheet captures the name of every single excel file in the folder?
I have been trying to get Excel (2007) to change the colour of tabs to match other tabs in the workbook
Using this code I get the colour code of the current tab
Code:
x = ActiveSheet.Tab.ColorIndex
But when I use this value in a procedure like this:
Code:
ActiveSheet.Tab.ColorIndex = x
The tab is a different colour!
I have a summary page that includes the titles for each tab within the excel 2003 workbook. I want to use the names of the tabs in the summary page and create it into a formula to lookup fixed cells within the various tabs. Sorry for not uploading an excel doc but I was at work earlier and the thread did not load for some reason, so I am reposting it.
View 3 Replies View RelatedMy main data tab is collecting gallons pumped for a particular piece of equipment. I have a drop down box to populate the piece of equipment and VLookup to identify the unit number associated with the equipment. I would like to create a separate tab for each piece of equipment that will track the number of gallons pumped during the calendar year. Here is the format for the main tab:
DateBeginning Meter ReadEnding Meter Read GallonsEquipment IDEquipment Description
1/2/2014565443565625 18212006 ford f250
1/10/2014565625565675 5022006 Chevy 2500
1/11/2014565675565750 754Ford Taurus
1/12/2014565750565830 8012006 ford f250
1/13/2014565830565900 7012006 ford f250
1/14/2014565900566000 10012006 ford f250
1/15/2014566000566125 12512006 ford f250
1/16/2014566125566215 9012006 ford f250
Here is the format for each piece of equipment:
2006 Ford F250
Date Gallons
1/2/14 182
1/12/14 80
1/12/14 80
1/12/14 80
1/13/14 70
1/14/14 100
1/15/14 125
1/16/14 90
The formula I used in Cell A4 is =INDEX(Gasoline!A4:A23,MATCH(1,Gasoline!F4:F19,FALSE),1)
Cells A4 and B4 have the correct values. My problem comes in A5,A6 and B5,B6. These should not have a result because they are different pieces of equipment. Throughout the year, each piece of equipment is going be used on the main tab. How do I keep the individual tabs from picking up the same entry multiple times.
I have a spreadsheet with multiple data tabs feeding a few summary tabs.
For this question I will deal with one summary tab and two data tabs, one data tab for sales and one data tab for service. On the summary tab, I want to look at vehicles sold during a certain time period-(looking to the sales tab). For each of the records in the sales tab that match the date range, I need to count the repair order activity on the service tab. The key between the summary and sales tab is the sales date, and the key between the sales and service tabs is the vehicle serial number.
I currently have multiple columns on the sales tab to perform the counts from the service tab, thus allowing me to pull the information to the summary tab. Problem is that the spreadsheet has over 2 million calculating cells and tends to take excessive amounts of time to recalc.
I'm quite proficient in Excel but am struggling here, would really appreciate any help
I basically have 80 tabs with IP addresses in Column A and then information in Columns B, C and D related to this.
What I want to do is bring all this together in one sheet
Possible?
The following is an example of the layout of the data that I have in a pivot table. What I need to do is find a vb code that will grab each store and its data and put them into either an individual pages or tabs. For example, if I have region 1 selected from something like a data validation list, the code will put stores 1 and 2 and their data from below into individual pages or tabs. Then if I select 2 from the list it will no longer show the results from region 1 and do the same for region 2.
region store apples oranges
1 1 3 4
1 2 3 3
2 3 4 4
2 4 5 3
I've only recently ventured into the VBA scripting and am finding it quite exciting. After doing some trivial stuff, I'm trying to work with websites. Currently, I'm trying to pull data off of a website which poses a form which has to be filled first. I've been successful in filling the form and clicking submit, through the code, but the site opens the results in a separate tab in IE. I am unable to make it go to that tab and copy-paste data from there.
Secondly, instead of just blindly copy pasting, it would be better if the data is pasted in a more readable format (as on the website). The following code is plainly copying and pasting the data as-is and hence rendering it unreadable:
VB:
.ExecWB 17, 0
.ExecWB 12, 2
.PasteSpecial Format:="Text", link:=False, DisplayAsIcon:=False
In the annual table tab, I want to be able to select a sales person or other field, and create a table that will pull data from all the tabs. For example, if I select the salesperson Kelly, I want it to pull all of the data from January, February, and March, and compile it into a table.
I would want the table to be dynamic also - I want to be able to quickly sum/average all of that salesperson's sales for all months.
I have a large amount of information. I need to use three criteria to look up one value however the data now spans across two tabs as there arent enough coulmns to support the data in one tab. I have been trying to use the following:
View 6 Replies View RelatedI have an excel spread sheet with about 300 tabs. each sheet has the same column fields..I need to pull certain column fields ( the same fields ) out of each tab and export them to another spread sheet.
View 6 Replies View RelatedI'm not very good with macros and I need to create a macro that copies data from one excel worksheet into multiple other worksheet tabs in the same workbook. I have 8 columns and thousands of rows of data. The spreadsheet is sorted by column E.
In column E, there are about 25 different values going down throughout the spreadsheet. I would like the data for each of these Column E categories to be copied over to a new tab in the spreadsheet with the tab name as the value in E. So in the end there would be the main tab, and then 25 new tabs with the filtered data. Does anyone already have a macro that will do this?
I have a spreadsheet with 12 tabs, 1 for each month in the year. On each tab I have employee names (column A), followed by the premium they pay for their health insurance (column B). I'm attemting to create a list of each employee and how much they paid for helath insurance over the year. Since employees come and leave thorughout the year, the lists aren't the same on each tab. However, I was able to create a master list of all possible employees and placed this list into a new tab.
I'm vaguely farmiliar with the SUMIF function and I believe that this would be the best approach, or some possibly sort of vlookup.
I am trying to create a worksheet that you fill in data on the master tab, and it copies to the appropriate secondary tab based on set of criteria
I have one worksheet with multiple tabs.
Tab 1 - Master
- This tab is updated by admin with new contacts
Tab 2 - Customer service rep 1
- This tab will have all the listings that have the CSR1 in a column in the master table.
Tab 3 - Customer Service rep 2
- This tab will have all the listings that have the CSR2 in a column in the master table.
Each table has the same columns of data which all need to be copied to the sub tables if the CSR column matches.
Is there a formula that would work to auto copy data from the master to the appropriate sub tab or maybe its needs to be done in VB?
