Collate Data From Two Sheets And Paste It On Another Sheet And Do Some Calculation
Jul 18, 2013
I'm trying to collate data from two sheets (sheet1 & 3) , paste it on sheet5 and do some calc. But the macro keeps copying the same row after 2 iterations. Also the find function stops working after 1st iteration. Not sure what to do
Sub Macro17()
'
' Macro17 Macro
'
'
Sheets("Sheet1").Select
Range("B3:L3").Select
Do Until Selection.Row = 10000
Selection.Copy
Have some code I have found from this site shown below. It works great however I need some help in editing it to change what it does. Basically the code currently takes all the data from set cells from all sheets after a set point and adds a new sheet and copies data from each of the sheets between this point and the new sheet and then pastes it to this final sheet.
What I wish to change is I already have a sheet which I will be using to analyse data from so how would the code look to be able to point to such a sheet within the same workbook? The sheet will be within the first 2 sheets of the workbook so from the code below you can see I have already set it to not include this sheet. I wont be needing a new sheet to be created at the end, I just want the data to paste to my analysis sheet which we can call "analysis".
I have a workbook that includes 4 seperate sheets that are used to record time and expenses for 4 members of staff. I want to write a macro to select the data I need from each sheet and colaberate together in a 'data' sheet so I can combine all the info to run time and expense reports per client showing combination of all time and expense incurred from all 4 staff.
I have named cell ranges in each of the 4 time-sheets. I proceed to record a macro, select the first named range, copy and paste into my data sheet, do a control home then control down arrow, then one more down arrow to get to the first blank cell and repeat the process for all four time-sheets.
This works until I add a new line and then the data will only appear for the last time-sheet (last row of data).
I have multiple .xls sheets in a folder. C:Documents and Settingsu369875DesktopProject stuffTestin Save_ASCompleted History. And need to copy the data in all of them and paste them into a new sheet (one main sheet) in this folder...........
Copy and paste the data from different excel sheets to one main sheet.
I will get a file which may contain 10 sheets or 15 sheets depends on data and rows also not sure it varies from sheet to sheet. Now, I would like to consolidate all the sheet data except first row (heading) for first instance I need heading and second sheet onwards not required the headings hence, macro should copy from second row onwards.
The data should get paste one by one if first sheet contains rows till A100 then in main sheet for second sheet data paste should happen from A101.
There's one sheet that has a list of customers (this is updated very frequently). These customers are either ‘New’ or ‘Existing (as listed in a corresponding column) - would it be possible to have a macro that, when run, will place a copy of existing customers into a second worksheet (“view list – new”), and a copy of new customers into a third worksheet (“view list – existing”), with the main worksheet still listing both existing and new customers.
As the main sheet that lists all customers is updated very frequently (with customers being added and removed throughout the day), would it be possible to clear all contents of the other two sheets that each list of 'existing' and 'new' customers will be copied into, before the two lists are copied into each of the two sheets (just to ensure there isn’t any data in there from the previous time each list was copied in).
I’ve given this a go via the ‘record macro’ function - some users of this WB use excel 2000, and others use excel 2007, but it only seems to work on excel 2007 (which is what it was recorded on)…
I am having trouble copying and pasting the results of a calculation on one sheet to another sheet. I believe my problem is that my destination cell is actually two cells merged so the destination is obviously not the same size as the source. Here is the section of code I am working on:
Code: Sub CalculateDeviceFailureTimes() ' ' Used to manipulate the UEM data file to find the outage times of different devices in the Astro System ' Dim Output As Integer
[Code] .......
Like I said the section after the initial 'If' works and 0:00:00 is entered into the cell D15 with no issue. My problem comes when I try to copy the result of the formula in 'G3' to 'D15'. Like I said I believe my problem is that 'G3' is a single cell and 'D15' is two cells merged..
I have a workbook with 26 sheets, labelled A to Z. Column A in all the sheets have names from rows A6:A35.
I need a macro or a code to extract all the names from each of the 26 sheets and paste it to a new sheet 'Names' under column A, such that names starting with 'B' paste under all the names 'A' and so forth till 'Z'.
I am looking to collate Data of Peoples Activities from their status and duration. I would like to have a table where I would be able to see each agent name, their status and how long they took in each one. e.g.
Name | Status | Total Time Humpty Dumpty | NotReady | 0:15 | Wait | 0:12
I have attached a sample worksheet of data, if anyone can guide me as to how i can do this also if this can be done through a macro, that would be alot easier as i have to collate atleast 200 peoples activities.
I always copy data from all tabs to a single tab. I am looking for a macro which does this and saves time. Criteria is Data starts from Col B to Q not further in all tabs, but the rows will vary in all tabs.
I developed a database for tracking our Search and Rescue activities on an annual basis; this usually involves ~140 calls per year. Amongst other things, we log the time the call came in. The time is entered in numbers format, not text, as I couldn't figure out how to get a time range (09:30, etc.) to work. It's like military time...0015, 0945, 1730, etc., so in numbers format, 0930 comes out as "930", 0030 as "30", etc. I developed a tracking column in one hour increments...0000-0059, 0100-0159, etc. Each time a call is entered and the time logged, I'd like to keep a sum total down in the time range column...so a call received at 0930 would end up in the 0900-0959 box. Among other things, I tried formatting with, "=COUNTIF (range:range, ">0900, <0959") but that doesn't work.
I have multiple excel files with a form popping up whenever these files are opened (form has been called in Workbook open function). I need to collate data from these multiple excel files without opening these files. Can somebody help with a sample code?
I'm looking for a formula that will match columnA sheet1 with columnA sheet 2 and where theres a match (alphanumeric) will copy the whole of the row in sheet 2 onto an entire new sheet.
I have a data on sheet1 which goes from A2:T unlimited, I already have a macro that enables me to pull data from A2:T2 that then collates to sheet2, but I need it to then go to the next populated row which will be A3 and collate the data then progress onwards until final row.
I have a workbook with 2 sheets. Both the sheet contains Column "Name,Avg,Max". Compare both the sheets and paste the Avg values in Sheet3(Avg) and Sheet4(Max). I have attached the sample file below.
Every month we collect data from a number of employees and average it out in a new excel workbook ready for analysis. Each employee sends in their monthly data, structured identically, with only the numbers in the data tables different.At the moment, we just copy and paste every single data return into the separate worksheets of a single workbook, and on the front page of the workbook we create a simple formula which adds the equivalent cell in each sheet together to get a total. Its not hard to do, but its very lengthy as a process.What I've been researching, is the possibility of a macro that can automatically send the outputs of separate workbooks into one central workbook, so that we don't need to go through the copy and pasting of each return every month.
E.g, Say I have 10 workbooks, named Book1, Book2, Book3 etc, which each have a number ranging from 1 - 10 in cell A2. Could A macro be designed to bring all those values together into cell A2 of an 11th workbook, e.g one entitled book11? I'm aware that said Macro may need to exist in each separate workbook in order for the process to be carried out.
I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
On sheet "CoA" i have at table of periodic payments that is created via an input form and what I want to do is have accounting entries automatically generated in my cask book based on dates.
I am trying to count the number of rows on sheets 11 To 2 in my workbook. I want to count the rows (excluding the header) on each sheet one at a time and place them on a "Summary" Sheet. So for example. The row count for Sheet 11 would go in cell B2 of the "Summary" Sheet. The row count for Sheet 10 would go in cell B3 on the "Summary" tab. The row count for Sheet 9 would go in cell b4 on the "Summary" Tab. I have taken a crack at the sub procedure but can't get the syntax and/or the logic correct.
Here is what I have so far:
Code: Sub SummaryCalculations() Dim lr As Long Dim i As Long Dim SheetArray(11 To 2) As Worksheet 'Sheets that the rows need to be counted on are 11,10,9,8,7,6,5,4,3 and 2
What I am trying to do here is to compare 2 lists in 2 different files, and when there is a match, then copy and paste the related cells of the matching name. Sorry if this sounds messy, perhaps the sample file I have attached can explain better.
Every month I get a new file in the format of “Data Source” sheet where the list of banks in column A and the figures in column M, AA and AB might change from month to month. For the sake of convenience, I put the source data as a different sheet instead of different file here.
I have an existing report template in the format of “Final report” sheet where basically I copy and paste the relevant cells according to the name of the banks.
I don’t think I can use Vlookup because the cells that I want to extract are not right beside the search criteria. If I’m wrong please correct me.
Anyway, assuming a macro is needed for this, I am wondering if I can create a macro, where it can search the list of banks in column A in “Data Source” sheet based on the list in column A in “Final Report” sheet, then copy the correct cells from column M, AA and AB and then paste them into the correct cells in columns B, E and H in “Final Report” worksheet?
Note that not all the banks in the “Final Report” sheet are in the “Data Source”, so for this example, row 4 for ABN Bank should remain blank after the search because it is not listed in the “Data Source”. The Data Source List might also change over time.
There is also this problem of the bank names from the “Data Source” sheet not being exactly the same as the existing list in “Final Report”. For example in this file, ANZ Bank in the other sheet have all the extra stuff behind, but we know it is the same bank.
I have 1 workbook, with 3 sheets. Sheet1 (EVER) has 3000+ rows and 12 columns of customer information. This sheet is for all customers who have ever placed an order. Sheet2 (06-07) has 1500+ rows and 12 columns of customer information. This sheet has all customers who have placed an order in the last 2 years. Sheet3 has 1 row, which consists of the column titles (12 columns) that are on Sheet1 and Sheet2. I need to put all customers that are on Sheet1, but not on Sheet2 in Sheet3. I have tried VLookup; advanced Filter and a number of codes in the last 3 days and have not been able to figure this out.
Most excel/vba books say not to use the sumif function. I have a very large workbook (9meg) and cant use VBA code as it slows down the interation calculations required. I have used the sumif function to find and collate unqiue data on different worksheets. Is there another function that i should be using?
I am trying to put togther a VBA form button click to do the following: I have several customer names all in master sheet A1 - A300. I want the code to notice that there is a new customer and generate a new sheet, naming the sheet the customers name and copying and paste the entire sheet named 'worksheet' to this newly generated sheet.
I want vba code to pull data from two sheet in workbook, code has to pull all data from first sheet , then pull data from second sheet and paste some particular column only below first column sheet
e.g i pull data from two sheet(ONSITE&CCI)
SHEET-1ONSITE CONTAINS HAVE 57 COLUMN SHEET-2 CCI CONTAINS ONLY 19 COLUMN FIRST I PULL 57 COLUMN DATA ONCE FINISH MOVE TO SECOND SHEET CCI CONTAINS 19 COLUMN BUT ITS HAS TO PASTE DATA BELOW DATA OF ONSITE TO PARTICULAR ASSIGNED COLUMN'S ONLY BUT COLUMN NAMES IN BOTH SHEET IS TOTALLY DIFFERENT
I want to copy data from workbook1-sheet1 to workbook2-sheet2. I done the coding and it was working fine till when the data to copy from and copy to is only 1 row.
The information cannot be pasted because the Copy area and the paste area are not the same size and shape. Try one of the following:
* Click a single cell, and then paste. * Select a rectangle that's the same size and shape, and then paste. I believed when there's only 1 row of data, the code copy the entire sheet1 and can't locate the last empty row in sheet2.
Should I use a if to check for > 1 row of data (2 rows including header row) or is there a better way?
The idea is to find the new references that have been created every month in sheet 2 and paste into Sheet 1. How to find the new ones is easy .However I don't know how to move the data around sheets!
Sheet 2 (A1: AQ25135) A B C D
FIND NEW PO Purch.DocItem Vendor Vendor Name
200095185710 200095185710 15152695 UAB Pajurio Gabija
[Code] ......
I need to do the following:
Whenever you find the word "NEW" in a row of sheet 2 in range A2:A50000 copy the row from B to AM and paste it into sheet 1 Column A to AL.
However Column A contains already data. The data should be pasted right below the last A row with data
In sheet 2, column A contains the following formula
This work is challenging for me, now am doing Comparing the Data between One Sheet to Another Sheet, and Paste into Different Sheet.
I am Manually Comparing the Data between two different sheet, If the Data is matching, or Not matching, those data i have document in other sheet, So i have lots of records available. so manually doing its very difficult, but macro can compare the data. I will give the details of my process and example sheet is attached here....
Data 1.xls == This sheet have multiple tab with data and different order no.(Multiple Tab with thousands of records available) orderNumberModified.xls == Modified data available. (Compare the OrderNumber to Data1.xls)
Now we have to compare the modified.xls and Data1.xls... For modified.xls have ORDERNUMBER available, that Numbers match with all tabs from Data 1.xls sheet.
If ORDERNUMBERS are matching, Need to copy the entire row from modified.xls To AVAILABLE TAB from Comparedata.xls sheet If ORDERNUMBERS is not matching, copy the entire row from modified.xls To NOTAVAILABLE DATA tab from comparedata.xls sheet
