I need to be able to run a macro called "Daily_Fuel_Line_Save2" when the enter key is pressed in any cell in the range A10:F10, but I still need to be able to use the tab key between the individual cells and change values in this range before starting the macro.
I already have the following code on the sheet which I would also like to keep.
[Code] .....
I'm trying to get a macro to run in my worksheet anytime someone presses the Enter key. I've been trying to use Private Sub Worksheet_Change(ByVal Target As Range) and getting extremely frustrated. I’ve tried a bunch of things and nothing seems to work. This is my latest that doesn’t work.
View 5 Replies View RelatedI want is when Enter is pressed on Range Name =Match then, Goto Cell U3
To clearify what i need is when enter is pressed on any Single Cell belonging to the Range given the name "Match" then, Goto Cell U3...
I have a userform that contains a number of controls. When I press the enter / return key, I would like this to have the same effect as hitting the 'OK' button i.e. run some code. At the moment, hitting enter sets the focus on the next control in the tab order.
View 5 Replies View RelatedI have a userform with a textbox in it. Once you type what you want in the textbox, you click on one of two buttons - either Accept or Cancel. It would be much neater if the userform would close when the user hits the carriage return in the textbox. Anyone know how this can be achieved? Kjartan Auto Merged Post Until 24 Hrs Passes;Doh never mind folks, I figured it out...
Private Sub Userform1Textbox1_Exit(ByVal Cancel As MSForms.ReturnBoolean)
Userform1.Exit
End Sub
When I enter a value into a cell and press "ENTER" or press the Right Arrow the whole spread shifts to the left instead of just confirming the entry of the cell and moving one cell(column) to the right.
This is a spreadsheet that I have used for over 3 years so something has changed in one of the settings.
I have Office 2003.
I would like to detect when the user uses the "DELETE" key and would like to run a macro at the same time.
how to detect it and run a macro in VBA.
I have Sheet2 containing Supplier data in 2 columns - SupplierTAxCode and SupplierName (unsorted)
Sheet1 contains the Expenses section.
In Sheet1, column E6 to E1000, after inputting each SupplierTAxCode and pressing the RIGHT ARROW key, I would like to automatically get the SupplierName in column F6 to F1000 - from the corresponding data in Sheet2
In the event that the input in any of the cells in E6 to E1000 does not exist in SupplierTAxCode in Sheet2, would it be possible at the same time, to change the background color of the adjacent cell (SupplierName) in column F6 to F1000 at the same time - as a reminder to add those to the Supplier data in Sheet2 at a later date.
I could use Index Match and Conditional Formatting, but am concerned about the file sizes.
how to make a code so that it captures the event of pressing any key of the keyboard and triggers a macro.
I tried using OnKey method but the problem with this is I am getting stick to any particular button whichever i specify in the onkey method wheareas I want to keep it general for any button in the keyboard.
Also if anyone can suggest how can I use OnKey method to use the "S" key to launch a macro.
I'm trying to enter a series of formulas referencing the first cell of each row.
With Range("A40")
Range(.Cells(1, 1), .End(xlDown)).Offset(0, 1).FormulaR1C1 = "= COUNTIF(Details!R2C2:R65536C2,RC1)"
Range(.Cells(1, 1), .End(xlDown)).Offset(0, 2).FormulaArray = "=RC[-1]-SUM((Details!R2C2:R65536C2=RC[-2])*('Details'!R2C11:R65536C11=RC1))"
Range(.Cells(1, 1), .End(xlDown)).Offset(0, 4).FormulaArray = "=SUM((Details!R2C2:R65536C2=RC1)*(Details!R2C4:R65536C4>TODAY()-7))"
Range(.Cells(1, 1), .End(xlDown)).Offset(0, 5).FormulaArray = "=RC[-1]-SUM((Details!R2C2:R65536C2=RC1)*(Details!R2C11:R65536C11=RC1)*(Details!R2C4:R65536C4>TODAY()-7))"
Range(.Cells(1, 1), .End(xlDown)).Offset(0, 7).FormulaArray = "=SUM((Details!R2C2:R65536C2=RC1)*(Details!R2C4:R65536C4>TODAY()-30))"
Range(.Cells(1, 1), .End(xlDown)).Offset(0, 8).FormulaArray = "=RC[-1]-SUM((Details!R2C2:R65536C2=RC1)*(Details!R2C11:R65536C11=RC1)*(Details!R2C4:R65536C4>TODAY()-30))"
End With
While this code works for the first formula, the following 4 are arrays, and for some reason, will only reference the first A40 cell.
I have a table of data which contains company names, the number of high risk policies, number of low risk policies, and the percentage of high risk policies (compared to total policies).
What I want to do is for people to be able to select up to six of these companies and press a button that says 'create graph' and it creates a graph which shows the number of high risk and low risk in a stacked bar, and the percentage on a separate axis as a line. I know how to manually create this graph no problem, but to be able to dynamically create one from selected companies would be awesome.
To start with I have created six drop downs where you can select the company name as I image the macro will need to know which companies' data to look for in the source table.
If i want to make a macro button to run for a certain no. of time pressed, like for 100 times, then the button is disabled, how can this be done?
View 9 Replies View RelatedAs above can anyone tell me how to enter a formulaArray to a range using VBA.
EG
{=IF(A5>0,SUM(B5:AT5*$B$2:$AT$2),"")}
To range AU5:AU500
how I can modify the below code so that it populates the timestamp in the same row in Column E if Column A is populated with data...
Example:
Cell A1 is populated then populate Cell E1 with timestamp
if
Cell A4 is populated then populate Cell E4 with timestamp
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Cells.Count > 1 Then Exit Sub
If Target.Address = "$A$2" Then
With Sheet1.Range("E2")
.Value = Time
End With
End If
End Sub
In Q3 I have a formula which determines the "next" date from today. In P3 I need to enter a formula which will return the value of the range (P6:P37) which is in the same row but different column as the value calculated in Q3.
View 1 Replies View RelatedI have a spreadsheet that contains data from sales being made in various locations (sheet 1). The date the sale was made is in column A, and the location is in column AZ. I may have from 0 to 12 sales at that location on the same date. I am building a report in another sheet (sheet 2) that counts the number of sales for each date and displays that number in a cell in row 3. Above row 3, I want a formula that will reference the location (AZ sheet 1) and display that into my cell above row 3 in sheet 2. Each column in row 1 sheet 2 will have new date.
View 5 Replies View RelatedSub test()
Dim rng, dest, c As Range
Dim result As String
Worksheets("sheet1").Activate
Set rng = Range([a1], [a1].End(xlDown))
Set dest = Range("d1")
result = ""
For Each c In rng
result = result & " " & c
Next
MsgBox result
dest = result
End Sub
the penultimate code statement "dest=result" does notwork the value of "result" is not entered in "dest" though no error comes up if I use "dest.value=result" it gives error "object required" If I use "range("d1")=result" it works.what is the theoretical mistake.
how can I go about this?
View 9 Replies View RelatedIn the attached sheet, there is a range with lots of entered data (a small section of the total) where I would like to enter into all of the blank cells the value 99999.
I have been selecting the range as follows:
How could I detect if the CTRL (Control) or ALT key has been pressed. I want to execute a macro when either one is press over a given cell.
View 3 Replies View RelatedOnkey is used to make something when a key is pressed. There is a instruction to make something when any key is pressed?
View 4 Replies View RelatedI took an Excel course in college but am a bit rusty. I have a customer database that I created and I would like to see certain things after entering a date range that I specify. I uploaded a small excel sheet to show my database and what I'm looking to do. Basically I would like to enter a date range and see these answers:
Total Orders in that date range
Total unique orders in that date range
List of customers (name included) who ordered more than once in that date range
The only columns of data I need to use are: firstname, lastname and orderdate.
When i press say a command button " Add Repair Information" i want the User to Enter the serial number which i have given it a range called SerialN from the excel sheet and enter a repair action. Is there a function in Excel which will allow me to search the Serial Number and allow me to put the Repair action across in the cell on the same line?
View 5 Replies View RelatedI want to get number (going from 1 to 15 (for example)) when i click on commandbutton (on userform without textboxes, combos , etc, ..... except only one commandbutton)!
In other words, when i click on commandbutton, i want to get (on msgbox) number 1, then when i click again on commandbutton, i want to get number 2, then when i click on it third time, i want to get number three on msgbox window, and so on until i close userform!
Private Sub ValidarCampos()
Dim r As Long
Dim c As Long
Dim s As Worksheet
'Set s = Active.Worksheet( Name)
Dim Error As String
' Dim ws As Worksheet
Dim ValorMensaje As Long
'Turn off Screen refresh
Application. ScreenUpdating = False
'Use Cells(Row, Column) for range adddress
r = ActiveCell.Row
c = ActiveCell.Column ..................................
How can I simultaneously with this code put data from textboxes to Active sheet and sheet "Izpisi". So when the button Add(dodaj) is pressed the data goes to active sheet and sheet ("Izpisi") at the same time
I am trying to write a macro which will get values from column B and C and print the result on column D using a simple function like the one before:
D2 = "text" & B2 & "text2" & C2 & "text3"
I need this to be done in the macro, so that when I click the button, it will automatically create column D. Column B is formula and column C is constants.
I tried something like the one below:
I want a macro to start when I enter anything in a cell. For example anytime I enter a value in cell " D1 " a macro should start.
View 9 Replies View RelatedI am in need of an excel macro that will be able to let me F2 (edit cell) and then with whatever is in the cell (variable)-- press enter, repeat for a whole column of data.. I'm new to code-writing, so probably not complex..just not sure and any suggestions would be helpful. I will be receiving a data set and need to compare it to another data set, and they are not appearing identical because in one dataset the data has an enter afterwards, and not in the other.
View 9 Replies View RelatedI have a form, and the form has a textbox. I have a button labeled search, and when it is clicked the macro searches for the information in the text box. How do i make the search action begin when the user press'es the enter key while on the textbox?
View 4 Replies View RelatedI really know nothing about vba so here goes. I would like to enter data in a row with 4 cells of info. then hit enter and return to the first cell and move the row down. all four cells must have data entered. and all four must move down. i tried some code as below i found and i modified but it did not work as expected. this moved the row down when returning the cursor to A2. It also should not copy the data style of the top row.
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Target.Column <> 1 Then Exit Sub
Application.EnableEvents = False
[Code].....