When I enter a value into a cell and press "ENTER" or press the Right Arrow the whole spread shifts to the left instead of just confirming the entry of the cell and moving one cell(column) to the right.
This is a spreadsheet that I have used for over 3 years so something has changed in one of the settings.
I have Office 2003.
This problem started after a lot of development of various macros in a moderate sized workbook.
I've gone back to various stages of development and am unable to find what is causing this one worksheet tab to jump to the beginning of the cue (to the left) when i first click on that tab.
Thought the most likely culprit was a worksheet change macro, but even after deleting that, the behaviour persisted.
I'm trying to get a macro to run in my worksheet anytime someone presses the Enter key. I've been trying to use Private Sub Worksheet_Change(ByVal Target As Range) and getting extremely frustrated. I’ve tried a bunch of things and nothing seems to work. This is my latest that doesn’t work.
View 5 Replies View RelatedI need to be able to run a macro called "Daily_Fuel_Line_Save2" when the enter key is pressed in any cell in the range A10:F10, but I still need to be able to use the tab key between the individual cells and change values in this range before starting the macro.
I already have the following code on the sheet which I would also like to keep.
[Code] .....
I want is when Enter is pressed on Range Name =Match then, Goto Cell U3
To clearify what i need is when enter is pressed on any Single Cell belonging to the Range given the name "Match" then, Goto Cell U3...
I have a userform that contains a number of controls. When I press the enter / return key, I would like this to have the same effect as hitting the 'OK' button i.e. run some code. At the moment, hitting enter sets the focus on the next control in the tab order.
View 5 Replies View RelatedI have a userform with a textbox in it. Once you type what you want in the textbox, you click on one of two buttons - either Accept or Cancel. It would be much neater if the userform would close when the user hits the carriage return in the textbox. Anyone know how this can be achieved? Kjartan Auto Merged Post Until 24 Hrs Passes;Doh never mind folks, I figured it out...
Private Sub Userform1Textbox1_Exit(ByVal Cancel As MSForms.ReturnBoolean)
Userform1.Exit
End Sub
I have the macro below, how do I make it NOT be case sensitive, I want it to work for test. Test, TEST
Excel 2003
Code:
Sub test()
If Left(ActiveCell, 4) = ("test") Then
MsgBox "Activecell starts with test"
End If
End Sub
I have produced a basic search/lookup facility on an Excel workbook that simply allows the user to enter a post code and some details will be returned using a vlookup. The document is going to be rolled out to a number of operational users so I want to basically 'lock down' everything I can in the document (basically everything except the data entry cell) and make it fool proof- I have locked all cells apart from the data entry cell and have made the file read only.
The only issue I am encountering is when the cursor is in the one 'unlocked' cell (i.e. the one the users will enter the post code into); it appears that you can break the document. For example, when the cursor is in the 'unlocked' cell, I am able to go to Tools > Options and change various settings including cosmetic colour changes but also cell calculation which breaks the lookup functionality. This is probably enabled as the cell is unlocked, but if I lock the cell, when I protect the document, it disables data entry!
if there is another way of providing this one cell for users to input data into for the vlookup to work whilst locking down the rest of the document to ensure that no-one can break it?
Very simple Excel 2007 spreadsheet. It consist of four columns with either numeric or alpha data in the. No formulas, no macros etc...
She emailed the spreadsheet to me and it works fine, I can enter data without problems. Whenever she tries to use it she just can't enter any data. She clicks in a cell and it highlights but she doesn't get a cursor and can't enter data. If she tries to click in the area underneath the toolbar to enter data she also does not get a cursor!! It used to work just fine for her but has suddenly stopped!
Im trying to enter a formula for volatility in my excel 2010 spread sheet
my hig low close is listed verticaly in A,B,C
The formula for D1 is supposedly “={LN((A1)/(B1))}^2â€
The formula for E1 is supposedly =SQRT(SUM(D1:D10)/10)*SQRT(252)*100
I put this in D1 and it is giving me an error
In Excel 2003 I am trying to compare two lists of names on the same spreadsheet to determine which names are different between the two columns of names. What is the easiest way to do that?
View 1 Replies View RelatedI used to use Excel many many years ago for all my basic business databases and pivot table reports (so was at a basic competency level) and want to use it again but it has been quite a while and I can't remember how to do the following.....
I want to build a database of sales and purchase info in say 'sheet 1' - let's say 30 different headed columns and then many lines of different information under each column.
In 'sheet 2' I want to create an invoice template of my own design (I can do easily) for printing.
This template will need to extract say 10 bits of information from a particular row and then put them in a certain place on this sheet.
How can I type in one piece of information in a cell on sheet 2 (say the invoice or line number of the database) and that will then trigger all the other needed information from that particular line in sheet one onto this template?
I know it can be done but for life of me can not remember the formulas to use for these other cells in sheet 2 based on the info put in that one 'trigger' cell
I am setting up a template to use to track candidates throughout their lifecycle. I am also creating a 'summary report' on another worksheet that counts total number of candidates, counts the number of candidates that have been submitted to the client, count of the number of candidates that have been interviewed by the client, etc.
How do I count the number of candidates in the spreadsheet?
In Cells A6:B5, I have "Submitted"
In Cells A7-?? I have dates for those candidates that have been submitted.
Then a new section titled, "In Process"
A list of candidates are contained within that section.
Then a new section titled, "For Review"
etc.
There are multiple sections, so the date in Column A1 may not always be in a constant row, as it depends on how many candidates are within a certain 'phase'.
I have a column I5, titled "Status" This column has a built in drop-down list that contains pre-defined status, for example, "Submitted", "Candidate Declined", "2nd Message Sent", etc. I need to be able to create a summary report based on a count of candidates that fit certain 'Statuses'. For example, count the number of candidates that were Interviewed. This could be a combination of Statuses: Phone screen with client, 1st F2F, 2nd F2F, etc.
(At home, I am using Excel 2003. At work, I am using Excel 2007. So if it's easier to create in Excel 2007, that's fine.)
The attached is a race keeper's scorecard.
Tab 1 lists all participants and race times.
Tab 2 generates a printout to post on a wall.
The spreadsheet works great, BUT, I forgot I needed to add a condition of DNS (Did not start) and DNF (Did not finish).
Once this is added, of course, it breaks everything done so far (damage being done in column M on tab 1 and all of tab 2).
My ideal state is that a DNS or DNF can appear in column L on Tab 1. . . and these participants fall to the bottom of the list generated on Tab 2.
I know there are miracle workers out there who can make this happen! Again, hoping for no code, and no manual manipulation if possible (end user is not Excel savvy). Must be compatible with Excel 97-2003.
I have a 2010 excel sheet containing 14 columns and 45082 rows in total. I am quite illiterate when it comes to writing macros but I know that what I need can be achieved with a set of codes.
To be more clear, I inserted two tables below. The first one represents the current data structure, and the second one is the way I want my data to look like.
Current data structure looks like
Variable 1
Variable 2
Variable 3
[Code].....
Why I receive a 400 error when the 'excel close' button is pressed in the attached sample.
View 2 Replies View RelatedWhen you hit the enter button, it should jump to the cell below the one you currently have selected. Well, mine doesn't do that anymore? My tab works fine to go to the cell to the left, but enter just keeps the current cell selected. I know it isn't the Keyboard, b/c it works for every other app. What have I disabled/enabled to cause this? This happens with both the "return" enter button and the enter on the number pad. As of right now, either a mouse click or the down arrow is the only way for me to jump to the next cell.
View 3 Replies View RelatedI've created a spreadsheet that has a number of command buttons acting as hyperlinks navigating to other worksheets within the workbook and other files. The buttons only function when in design mode and no matter what I try the document will not open in design mode. For ease of use I wanted to avoid training people on how to go into design mode, anyone aware of a work around?
View 3 Replies View RelatedI have created a spreadsheet which uses a User Form to input data and then give it a reference number (this bit works fine).
I am now trying to use a User Form to enter a reference number which will then be searched across my spreadsheet, I then want all the entered data relevant to that reference number to appear in a User Form along with additional fields for entry of additional info.
In this User Form, the original data could be modified but more importantly, the remaining data added before then being placed into the main spreadsheet.
This is a booking in system where the person presents to a receptionist and the initial data is entered. Once that person has been dealt with, the remaining details regarding their visit will need to be inputted, hence this request.
I have 4 textboxes that the user enters data. I then have a button on the user form.
i would like to write code so that when the user hits the button...
Textbox1 data goes into active cell
Textbox2 data into the cell below Active cell
Textbox3 below it
and textbox4 below it
then close the user form.
I am making a template for my company to automatically calculate the amount of sheet metal needed for a specific job. The spreadsheet could get very long depending on how much duct is needed. Is there any way I can automatically insert rows to the end of the sheet by pressing enter after filling the last row with data, which would then move the totals down. Also, the formatting of the rows I wish to add need to be copies of the ones above.
View 3 Replies View RelatedIn the attached WB - the formula, in Col. "D", seems to be too long - although returning the expected result. Could somebody lighten my eyes with a much shorter formula ?
View 3 Replies View RelatedIn a sheet, like the example, I have monthly shift schedules for employees. What I want is to count the total shifts for Saturday and Sunday, separately Night (N) and Morning (M)/Afternoon (A) shifts, as in columns with red.
ABCDEMNOPQRAGAHAIAJ1JUNE 20132DATE1234121314151617....
HOW MANY "N" HOW MANY "M" AND "A"3SATSUNMONTUEWEDTHUFRISATSUNMON....
AT SAT-SUNAT SAT-SUN4Employee1NNNNNMM--A205Employee2MMMM-NNNNN246
Employee3AAAAM--MMM067Employee4--MM-AANNM408............................................9EXAMPLE
I have 20 staff members that I need to schedule in half day shifts (AM & PM) across three different locations for the month of July.
I want to make sure there is no overlap/duplication for any one staff in a time slot. Nor do I want any one staff member to work an AM and PM shift in the same day.
Ideally, I would also like to avoid back-to-back shifts (e.g., not allow PM on Monday to be scheduled for an AM on Tuesday).
Lastly, I would like to have the number of shifts be be as equitably distributed across all of the staff members as well.
Any way that I can do this in Excel?
I have an Excel 2003 file that contains hyperlinks to OneNote notebooks on a Sharepoint site. An Excel macro looks for these links and determines the full hyperlink address which is then assigned to a variable. An Outlook message is generated which includes the hyperlinks.
The hyperlinks work in the Excel file. I can also copy them from OneNote and manually paste them into an Outlook message and they work. However, when I obtain their full address and transfer that to the email through code, the links do not work. The hyperlink address from OneNote starts with "onenote:http" which is not recognized as a link.
If I can do this manually, there must be a way to do this with vba. Are there characters I need to include in the OneNote hyperlink address to make this work? Is there another way to transfer the working link from Excel to Outlook?
I am trying to adjust the below macro so that it will work in Excel 2010.
Sub OpenAndProcess()
Dim fs As FileSearch
Dim I As Integer
[Code]....
I have table and need to take out montly total for each worker...
Now...
Each hours in day have own factor. (I need total hours per day but for illustration)...
So when worker works day shift from 8:00 to 16:00 it's easy... 8 hours
When works from 8:00 to 20:00 it's 8 hours + 4 afternoon hours
When works from 20:00 to 8:00 it's 2 afternnoon hours + 8 night hours + 2 day hours
Aditional problem is when day intercept holliday or sunday when that factors need to be included (if holliday is at sunday then it's like holliday).
Here is some attachment:
Book1.xls
I've also added last day of previous month and first day of next month because of night shifts than need to be calulcated. Therefore correct number of hours is 168 and not 188.
Below I calculated manually those numbers wich I want to be automated...
Also.. This is table I get.. If it's easier to make it somehow else, OK by me. And any number of aditional columns is not problem...
I need a macro that will take a list of 42 names and 27 locations. The names are broken down into group of shifts, 1 shift, 2nd shift and 3rd shift. We need to perform audits on the 27 locations in groups of 2 people at a time. What I'd like is a macro that would take all the names by shift and assign 2 random people to a location. All 27 locations have to be audited each week (safety), and a report filled out and turned into our safety committee. I would like to post the audit sheet with the macro on our shared drive. Can anyone help me with this.
View 9 Replies View RelatedI would like to run some code against the currently selected range of cells in the worksheet, but when I click on the VB button that runs the code, the focus shifts from the worksheet to the VB app, and the cells in the worksheet are no longer selected.
I know this is probably not a question that's come up before, but does anyone have any idea how to retain the 'selected' status of the cells in the worksheet ?