In the attached sheet, there is a range with lots of entered data (a small section of the total) where I would like to enter into all of the blank cells the value 99999.
I have been selecting the range as follows:
I have a spreadsheet that contains data from sales being made in various locations (sheet 1). The date the sale was made is in column A, and the location is in column AZ. I may have from 0 to 12 sales at that location on the same date. I am building a report in another sheet (sheet 2) that counts the number of sales for each date and displays that number in a cell in row 3. Above row 3, I want a formula that will reference the location (AZ sheet 1) and display that into my cell above row 3 in sheet 2. Each column in row 1 sheet 2 will have new date.
View 5 Replies View RelatedI want is when Enter is pressed on Range Name =Match then, Goto Cell U3
To clearify what i need is when enter is pressed on any Single Cell belonging to the Range given the name "Match" then, Goto Cell U3...
trying to eliminate error messages needed for math formula. With "0" in cells
works good "anyone"
When i press say a command button " Add Repair Information" i want the User to Enter the serial number which i have given it a range called SerialN from the excel sheet and enter a repair action. Is there a function in Excel which will allow me to search the Serial Number and allow me to put the Repair action across in the cell on the same line?
View 5 Replies View RelatedI am trying to display a message box for the user if there is "agency" in cell o8 but nothing in p8... I tried the following code but it doesnt work..
If Range("o8").Value = "Agency" And Range("p8").Value = "" Then
MsgBox "Please provide name of agency in cell p8"
Sheet9.Shapes("cross").Visible = True
Else
I need a code to enter 2 blank rows at each change in data in column B with totals entered at the end of columns E-J.
I have attached a sample with a before and after tab.
As simple as this sounds, I can't seem to make this work. I am looking for code for the following:
I would like to enter the word "Empty" into a cell if the cell is blank. The
range can be variable. The only columns that contain an empty cell are
columns B or C which can have any number of rows.
I am trying to enter a blank row everytime the 2ND character of a field changes...
sample cells (ALWAYS COLUMN B)(last row needs to be calculated as it changes daily):
2T2W3D3L4H4N4N4N6C6C
when done:
2T2W3D3L4H4N4N4N6C6C
was trying this:
Code:
Dim chkConfirmRw, LastNameRow As Integer
For chkConfirmRw = LastNameRow To 1 Step -1
'Compare the current cell to the one below it
'If they don't match, insert a row row below the current Row
If Range("B" & chkConfirmRw) Range("B" & chkConfirmRw + 1) Then
Range("B" & chkConfirmRw + 1).EntireRow.Insert Shift:=xlDown
End If
'Decrement the counter and do it again
Next
but it does not work.
So this is what I am trying to do, I have a column in my data that is for telephone numbers. When I receive the file some of the fields are blank in that column. I need to add to my current macro a part that evaluates the column for blanks and adds a static telephone number in the blanks (up to the last row of data in the file). I have been able to accomplish this with the following:
Range("N2").Select
Range(Selection, Selection.End(xlDown)).Select
Selection.SpecialCells(xlCellTypeBlanks).Select
Selection.FormulaR1C1 = "1112223333"
However, when the file that I receive has a telephone number in all the fields the code breaks at this point. I have tried On Error Resume Next, but that just replaces all the remaining cells in the column with the static 1112223333..
I need a macro that will work through a range, find the first non-blank cell, put that cell's info in another cell, then continue from where it left off and find/record the next non-blank cell. And the next, and the next, until the range is completed. If A1 had "1" and A5 had "2" and A10 had "3" then record those ,say in C1:C3 "1", "2", and "3".
I can find the first cell, but can't continue where I left off to get the next.
trying to find the first blank cell in column H. However this gives me 1048576 - i.e the number of rows in Excel 2007. I have checked and all the rows below row 33 are blank.
No_of_Rows = Sheets("Sheet2").Range("H2").End(xlDown).Row
the data is an extract from sage accounts.
I have a worksheet with active range A9 thru K200 that is locked. When worksheet is opened, I need it to automatically unlock all rows that are blank, for users to input data. It would be great if this could also require data in column A, C and K before allowing workbook to be saved and closed.
View 2 Replies View RelatedI had a macro to do this but forgot to save before close now i can't find it.
I need to find the next blank cell in range F15:F240 and select it so i can paste data there.
Retrieving the address of the last cell before the FIRST blank in a range.
OK, I have searched the web through six different search engines and explored too many dead end solutions to this problem that I am nearly ready to just scrap the whole sheet.
The problem is very simple.
I need to return the address of the last cell that contains data before the FIRST blank cell.
Heck, I don’t even need to have the address, I can just index the position.
Problem is this question has been posted on nearly every excel help forum from here to pokipsy.
Unfortunately EVERY solution I have seen fails the “FIRST blank” requirement.
I have a column of data that never has blanks until the end of the data. I need to know what that cell address is in order to identify a range.
This data has a table above it and below it so none of the “dynamic range” or “Dynamic range name” solutions will work.
How do you get that address without the function continuing to the last blank cell?
VBA to find the next appropriate blank cell in column "A" when copying ranges of varying sizes and pasting them in a new worksheet one after the next.
Currently I have recorded a macro that uses the code below to get to this location, but I am worried this will break when I get new data of a different range size;
Range(Selection, ActiveCell.SpecialCells(xlLastCell)).Select 'my initial range selection
Selection.Copy
Windows("myfile.csv").Activate
ActiveSheet.Paste
ActiveCell.SpecialCells(xlLastCell).Select 'finds last cell of my paste
Range("N69").Select 'I hit the down arrow once to get to new blank row
Selection.End(xlToLeft).Select 'to go to begining/col A of new row for next paste
I have tried playing around with
ActiveCell.Next
but can't get it to work.
This loop is overwriting the first cell in range and not writing to the first blank cell in range.
For Each cnote In NOTE
If Trim(cnote).Value = "" Then
cnote.Value = notes.Value
Exit For
Else
End If
Next cnote
If I take out the exit for , it copies to all cells in range.
I understand the following code finds and selects the last empty cell in column A
Range("A65536").End(xlUp).Offset(1, 0).Select
I am looking for a way to find last empty cell withing a specifice range of cells in column A. Example, I want to loop through from A6 to A16, find the last empty cell and fill it up.
I need to format cell D1 to have the fill color be red if any cell in D2:D21 is blank. I've tried
=VLOOKUP("", $D$2:$D$21, 1, FALSE) but that returns #N/A (there is one blank cell in the range at the moment).
I really don't want to use =OR($D$2="", $D$3="", ...$D$21="") if I can avoid it.
I am trying to perform a count against two ranges of data.Both ranges contain contain values (dates in my case).I am trying to perform a count where cells in column A have data but cells in column B do not.
Is there a way this can be done in Excel 2003? I have tried numerous COUNT and SUMPRODUCT queries but have not found a way to get this to work.
I can count the blank cells withiin a range using
=COUNTBLANK(C6:AD2506)
But I dont want it to count the cells if the entire row, within that cell, i.e. C6:AD6, is blank.
It should only count the blank cells within a row if there has been some data entered on that row..provided it has been entered within the specified range.
What can I add to the macro I already have in place (below) to accomplish what I'm looking for (2 parts)? ...
1) I need to copy everything (formulas) that is in C7:F7 and paste it down to all "active" rows - I'm defining an active row by any row where column A is not blank.
2) I need to copy everything (formulas) that is in Q7:AF7 and paste it down to all "active" rows - I'm defining an active row by any row where column P is not blank. (You'll notice by the screenshot that there will be blank cells in column P mixed in with non-blank cells.)
Code:
Sub AdminTool()
'
' CreateAdminTool Macro
'
'
ActiveWindow.Zoom = 90
Rows("1:1").Select
Selection.Insert Shift:=xlDown, CopyOrigin:=xlFormatFromLeftOrAbove
[Code] ...........
I have searched and trying to manipulate various formulas with no success...
I am entering an AverageIF formula into cell J15
I want to calculate the average of the folllowing ranges cells J5:J8,J10:J13
However, I want the cell J15 to display blank if cell J14=0
On reflection I am unsure an AverageIF formula is even correct.
I have multiple tables like the one in the picture and have to duplicate this code for different known ranges.
View 11 Replies View RelatedAs above can anyone tell me how to enter a formulaArray to a range using VBA.
EG
{=IF(A5>0,SUM(B5:AT5*$B$2:$AT$2),"")}
To range AU5:AU500
how I can modify the below code so that it populates the timestamp in the same row in Column E if Column A is populated with data...
Example:
Cell A1 is populated then populate Cell E1 with timestamp
if
Cell A4 is populated then populate Cell E4 with timestamp
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Cells.Count > 1 Then Exit Sub
If Target.Address = "$A$2" Then
With Sheet1.Range("E2")
.Value = Time
End With
End If
End Sub
In Q3 I have a formula which determines the "next" date from today. In P3 I need to enter a formula which will return the value of the range (P6:P37) which is in the same row but different column as the value calculated in Q3.
View 1 Replies View RelatedI need to be able to run a macro called "Daily_Fuel_Line_Save2" when the enter key is pressed in any cell in the range A10:F10, but I still need to be able to use the tab key between the individual cells and change values in this range before starting the macro.
I already have the following code on the sheet which I would also like to keep.
[Code] .....
Sub test()
Dim rng, dest, c As Range
Dim result As String
Worksheets("sheet1").Activate
Set rng = Range([a1], [a1].End(xlDown))
Set dest = Range("d1")
result = ""
For Each c In rng
result = result & " " & c
Next
MsgBox result
dest = result
End Sub
the penultimate code statement "dest=result" does notwork the value of "result" is not entered in "dest" though no error comes up if I use "dest.value=result" it gives error "object required" If I use "range("d1")=result" it works.what is the theoretical mistake.
I took an Excel course in college but am a bit rusty. I have a customer database that I created and I would like to see certain things after entering a date range that I specify. I uploaded a small excel sheet to show my database and what I'm looking to do. Basically I would like to enter a date range and see these answers:
Total Orders in that date range
Total unique orders in that date range
List of customers (name included) who ordered more than once in that date range
The only columns of data I need to use are: firstname, lastname and orderdate.