Attached is a simple chart and I would like Users to be able to tick a checkbox to show/don't show 'available' series. In the example If the User clicks for Group 1, then only Customer A's data is shown. If Only Checked Group B, then Customer B and C are displayed. If both boxes are checked, then all three Customer's figures will show. (Hopefully depending on what's ticked, the chart's scale would adjust accordingly)
View 3 RepliesI have a chart with multiple series which I am hoping to show/hide based upon a particular value attached to each series. I was therefore wondering if it was possible to extend the Series object class so that I could have something along the lines of a "Series.specialvalue" property which I could assign and then check to decide whether to show or hide the series?
View 1 Replies View RelatedI just recently installed Excel 2007 and I would like to know if it's possible to change all data points of a chart at the same time. In Excel 2003, I would normally hold down shift while clicking on each of the data points to make a global change. However, it appears I cannot do that in 2007.
I would like to display each data point's series name. When I go to Layout on the Excel Ribbon, and click on "Data Labels", and click on "More Data Label Options", the actual Y-axis values are shown for each data point. However, I do not want this - I actually only want the Series Name, but when I uncheck "Value" and check "Series Name" instead (under "Label Contains"), it only changes it for one of the series. Is there a better way, instead of going through each and every single series to make this change?
code to write down to make a checkbox hide the text in a few cells..
What I want is..
When I tick the check box I want it to show me the text in the cells (C11:D11 to be specific) and then when I untick it I want it to hide the text so all you can see is the background colour.
Here is the attatchment of what I have so far:
I have a userform labels role_selection with 5 checkboxes. Each checkbox with the caption labels as follow: Students, Teachers, Below Average, Customer, and Friend.
In addition, a 3 worksheets each labels as follow: Main page, General, and Final.
The General worksheet has the same name as the 5 checkboxes (Students, Teachers, Below Average, Customer, and Friend).
My question is how can i write a program to determine which checkbox is selected and compare the selected checkbox caption to the names that already existed in the general sheet. If the name exists show that name and hide the rest ...
Any way to be able to toggle (checkbox) a particular series in a chart.
I found this old thread that shows a simple method: [URL]
BUT, I do not want the series to appear in the legend if it is not plotted.
I have created a pie chart showing top 10 best selling categories. However, on this pie chart, I want %age of overall sales to be shown.
At the moment say I put in the following
Catalogue 1 100
Catalogue 2 98
Catalogue 3 92
Catalogue 4 85
Catalogue 5 84
Catalogue 6 75
[Code]....
I add Data Labels and select the percentages. This shows at Cat 1 having 12.5% of the sales (100 of 800 sales), Cat 2 having 12.25%, and so on..... However, what you don't see is the following data:
Catalogue 11 60
Catalogue 12 58
Catalogue 13 57
Catalogue 14 57
Catalogue 15 56
So based on 1,088 sales, Cat 1 at 100 is actually only 9.19% of TOTAL sales.
I understand what is happening, the chart is giving the percentage based on the data inputted into the chart.
I did consider adding an 11th category to the chart, which was the total of Catalogues 11-15. Whilst this does give a more accurate percentage figure (as now all sales have been inputted), it makes the chart look ****
Is there a way of either adding the 11th category, and then "hiding" it, so that the chart doesn't display it, but uses it's value to calculate Catalogues 1-10s percentage?
BTW: The reason I ask is that I could be dealing with anywhere from 30 to over 100 catalogues. So it's not ideal showing the others in 1 chart.
I run a large simulation experiment. I have a loop plotting data in excel of a user defined area. Because of the limit of 255 series I have allowed a maximum of 250 simulations (they all need to be plotted). But the length of each simulation is free. I know there is a limit of 32.000 data points in a graph and I have this as a condition too.
If I set the data range to 100 columns and 3000 rows the graph is produced when I plot by columns. (code below)
But if I set the data range to 250 columns and 1000 rows I get the above mentioned error message. Even though I only have 250 series.
After the data is plotted it is the code below that gets the error:
[Code] .....
I have the following code:
Sub Macro5()
ActiveSheet.ChartObjects("Chart 243").Activate
ActiveSheet.ChartObjects("Chart 243").Activate
ActiveChart.SeriesCollection(1).Delete
ActiveChart.SeriesCollection(2).Delete
End Sub
However, if there is no SereisCollection(1) actually present in the chart I get an error. How can I work around this? I will need an IF statement I assume, just not sure what it will look like.
The following code is supposed to produce six series on an xlXYScatter chart. It produces seven with the seventh series being a repeat of the sixth but named series 7.
Sub Chart2()
Dim DataRange As Range
Dim CellString As String 'Stores a cell range in the form "AA27:AB39"
Dim CurrentSeries As Integer
Dim SeasonCount As Integer
Worksheets("Hemisphere").ChartObjects(2).Activate
CurrentSeries = 1 ............
I have a list of data on one sheet and a 'reports' page on another sheet. The reports page has several pivot tables and a pivot chart. I want the pivot chart to format the bars on the chart relevant to the series name. The series names are "R" "A" amd "G" for Red Amber and Green respectively, I want the chart to change the colour of the series so that it is the correct colour ie. "R" would be coloured Red, "A" would be Amber and "G" would be green.
Sub PivotLoader()
Dim Red As Integer
Dim Amber As Integer
Dim Green As Integer
Red = Range("H9").Value
Amber = Range("H10").Value
Green = Range("H11").Value
Range("B8").Select
ActiveSheet.PivotTables("PivotTable4").PivotCache.Refresh
Range("D25").Select
ActiveWindow.SmallScroll Down:=18
Range("B49").Select...........................
How can i hide and unhide one checkbox using another one? Can it be done using IF formula?
And also i am using this checkbox to function something else as TRUE/FALSE.
I would like to have two series of data using the same X axis (date, formatted in months). The Y axis is in intervals of 100,000.
The first data series is historical (actual) data (i.e. Jan 2009 to August 2011). The second data series is forecast (Sept 2011 - August 2012). So i want the forecast series to start immediately after the historical series. It is a 'line with markers' chart. The key objective is that the forecast data looks visually distinct from the historial series.
Excel version: Excel 2010
OS: Windows 7
I'm using the following code to set the colours of the slices of all the pie charts in my spreadsheet based on each slice's legend's label: ....
View 9 Replies View RelatedI have a chart with 3 data series. The series are located in columns A, B and C respectively. Series I is a general number anywhere from 0 to 100,000. Series 2 is also a number, but is is devided by series 1. So, if series 1 was 100,000 then series two would be 25,000/100,000 which is 0.25. Series three will always be numerator of series 2 or 25,000 in this example. The numerator, or the 25,000 will never change, so, in my example, series three will be a straight line across the chart because it is always 25,000.
In my example, the .25 is plotted on the left value axes, and series one is plotted on the right value acccess (secondary axis). Series three is just a line in the middle.
My problem is that sometimes the line, series 3, doesn't match the values in both the right and left values axes. So, if series one is 48,000, then series two would be 48,000/48,000 = 1, and series three would be 48000 - the straight line. The third series should be a line touching the 48,000 on the right and the number 1 on the left. It does touch the 48000 on the left, but is below the number 1 on the left.
I want to use a macro to change attributes of a series in a chart. Unbelievably, if the series has been pasted into the chart from another chart, and although the macro can address the series and even return values (eg name) correctly, the selection simply cycles to one of the original series on the chart.
View 3 Replies View RelatedI want to create a check box which will hide/unhide a given row depending on if selected or not.
I can create a macro to hide or unhide the row, but I can't figure out how to do both depending on whether the check box is selected or not.
I have a query Work sheet that has the names of my worksheets in the following format.. mmm dd, yyyy H15 has a formula that returns the sheetname as a value. What Id like to have is a checkmark that when checked it will take you to that worksheet. Ive played with it and came up with the following...but its not working...any advise??
Sub SHOW_H15()
'
Worksheets("Query").Range("H15").Text .Select
End Sub
Also id like to have the check mark named as "Would you like to see (h15) 's worksheet?"
One more thing...if a value is in H15 Id like the checkmark box to appear. If nothings in H15 dont show the checkmark Box.
How can I add missing values to the axis in a pivot chart line chart? I have a numerical X-axis with values such as 0,1,5,8,14, etc. I have another set of Y values that correspond to the X values. If this was an XY-scatter plot I'd be able to plot X vs. Y and connect the dots for "gaps" in the X values. Since it's a pivot chart I cannot use an XY-scatter plot, I can only use a line chart. The line chart doesn't give me the ability to add the "missing" values, so it gives the impression that my data is more closely packed than it is. The data source is external to my spreadsheet, so I cannot add the values before creating the pivot table/chart.
View 1 Replies View RelatedI need to hide / unhide some rows in a sheet with the help of a activex checkbox... I want remove, let's say row 20:24 and row 34 with one checkbox.
View 6 Replies View RelatedI am having difficulties with this one. I have a button on my worksheet (sheet1) that runs a macro.
View 4 Replies View Relatedi'm newbie here. i need to hide & unhide rows using checkbox in excel but i stuck. i write these simple code and it doesn't work at all. my bad..
View 2 Replies View RelatedI am trying to have a checkbox that will hide any row between 6 and 300 say IF column P of that row that is empty, or does not contain the letter "Y", whichever is easier. I have found a bunch of different code snippets, but most hide a predetermined row range, and I need this to be dynamic.
If it can also expand the range automatically as I add more rows to the spreadsheet, that would be even better, but not necessarily required.
I would like to have a checkbox that when checked displays a column and when not checked hides the column.
the Column to be hidden will be on a page titled "Totals"
the checkbox will be on a page called "Roster"
the column to be hidden will be "Totals!M"
now for the real problem
I am using Excel 2004 for Mac. Which does not have a "control toolbox"
what should i do. I tried to do a macro but all that does is run the macro when the object is clicked regardless of if you are checking or unchecking.
I've had luck with hiding rows with a checkbox, but I cannot get them to unhide when I uncheck the box.
Here's my scenario - (using Excel 2000) In an estimating spreadsheet I have a print range of A1:N74. What I'd like to do is add a checkbox or button so I can hide and unhide rows based on a null or zero in column range b5:b62. This is for printing purposes, but I can't get a 'beforeprint' event to work either. All I need is box checked and cells hide, box unchecked and cells show (unhide).
Sub CheckBox1_Click()
Dim Rng As Range
Dim MyCell As Range
Set Rng = Range("B5:B62")
For Each MyCell In Rng
If MyCell.Value = "" Then
MyCell.EntireRow.Hidden = True
End If
Next MyCell
End Sub
I want the option of printing my form with and without a certain column. I need to hide a column when CheckBox.value=True and unhide a column when CheckBox.value=False
I keep getting errors:
Block If without End IF
End If without Block If
Else without If, when I use an else for the second If statement
Private Sub CheckBox1_Click()
Dim DescriptionCell As Range
Set DescriptionCell = ActiveSheet.Range("B:B")
If CheckBox1.Value = True Then
With DescriptionCell
.EntireColumn.Hidden = True
If CheckBox1.Value = False Then
With DescriptionCell
.EntireColumn.Hidden = False
End With
End Sub
i want to create a chart ,the chart have a checkbox beside it.
so i can check which line to display....
example
test1 (group112data,group113data)
test2 (group112data,group113data)
then the chart selection is to select 1 then it will diplay group112 result (test 1 and test2),this is to make comparison
can i do it for normal chart?
or must use pivot chart?
I have multiple check box (activex control). When click to first check box second should appear and linked to corresponding cell in column K. I did that manually
Is here the way to do tah using more complex
I have a SplashScreen that is activated in the ‘Workbook_Open ‘ Event.
A CheckboxControl on the SplashScreen allows a user to disregard the screen the next time the workbook is opened.
Private Sub Splash_Screen_Activate()
If Splash_Screen.ckbx_StopSplashScreen.Value = True Then
Splash_Screen.Hide
Else
If Splash_Screen.ckbx_StopSplashScreen = False Then
Splash_Screen.Show
End If
End If
End Sub
Unfortunatley my code is not working. I was hoping for some insight into making this work. Mind you, I’m a cut and paste VBA type of person, but I do understand the concepts enough to work with it.
1.What is the proper method for coding this?
2.Which location would this code be placed – the Form itself or a Module?
3.How and where do you store the CheckBox Value to be used the next time the Workbook is opened?
in my work sheet I need to Hide & Unhide some text box By checking a checkbox it means if user mark the check box the text box will be appear & if uncheck it the text box will be hidden
View 11 Replies View Related