Hide Rows Based On Two Conditions?
Apr 3, 2013
I'm trying to hide rows in an excel sheet based on two stipulations. I want to hide the row if it finds a particular value in column B and a different particular value in column K, otherwise i want it to do continue looping until it has hidden all rows that meet both stipulations.
VB:
Sub hide_loop()
Dim bl As Excel.Range
Dim blrange As Excel.Range
[Code]....
Currently I have tried different approaches, like a Do Loop, but I could not make that work, and this seems closer. The problem I'm having right now is that with this loop it hides everything found in column B regardless of what is in column K. I suspect this is because of the code following the if statement.''
View 9 Replies
ADVERTISEMENT
Mar 4, 2008
First, I realize there are plenty of hide cells threads but I have yet to find one pertaining to my situation and I apologize in advance if I this solution has already been posted.
The Problem: I am looking for macro code to a toggle button that will hide various rows that have no value between multiple sets of rows. The toggle should refresh the format of the rows as the information that was blank could later on have value.
The Setup: For each set of rows, the first row will have the label T and the last will have the label S. In between T and S there can be data. If the cells between T and S are all empty then the rows including T and S should be hidden other wise only the non blank cells between T and S should be visible.
The Reason: I have a master database worksheet, there are four copies of the master database worksheet each entitled phase1, ""2, ""3, & ""4 respectively. These phase sheets are linked to the master sheet and show the entire row's data based upon the beginning cell of each row showing either phase1, ""2, & so on.. The data is broken up into many sub databases and traditional auto filters or advanced auto filters will not be applicable as the title of the data and the empty rows in between need to be hidden if the data is empty.
View 9 Replies
View Related
Nov 8, 2006
Is it possible to close rows based on conditions? e.g if A1 contained Yes or No as the switch to close and a column contains open or closed in each row for the trigger. So if A1=Yes all rows with 'closed' will be hidden, if A1=No then all rows are shown
View 8 Replies
View Related
Jun 12, 2014
I'm trying to create a condition that hides rows when certain cells are equal to zero (column D + E + F). Anything else, I would like those rows to remain visible. Ideally, I'd like for this to be applied with the use of a macro (button) and then also deactivated when not desired (possibly another button). I've seen some varieties of code for this but none have worked flawlessly yet. An example sheet I would like for this to work on is my "ADM" sheet", among others.
View 2 Replies
View Related
Dec 30, 2011
I have the following data
Ticket NumberOriginSectorDescFB DataPax NameClassPointO CCRegionDestin
976533060397MAADXB-DFWCDHJKL3SD RAJESHFirstDFW---
976533060397MAALIT-DFWCDHJKL3SD RAJESHFirstDFW---
976533060397MAADFW-DXBCDHJKL3SD RAJESHFirstDXBUS--
976533060397MAADFW-LITCDHJKL3SD RAJESHFirstLITUS--
976533060397MAADXB-NBOCDHJKL3SD RAJESHFirstNBO--NBO
976533060397MAANBO-DXBCDHJKL3SD RAJESHFirstDXB---
976533060398MAADXB-DFWCDHJKL3SD RAJESHFirstDFW---
976533060398MAALIT-DFWCDHJKL3SD RAJESHFirstDFW---
976533060398MAADFW-DXBCDHJKL3SD RAJESHFirstDXBUS--
976533060398MAADFW-LITCDHJKL3SD RAJESHFirstLITUS--
976533060398MAADXB-NBOCDHJKL3SD RAJESHFirstNBO--NBO
976533060398MAANBO-DXBCDHJKL3SD RAJESHFirstDXB---
I need to delete rows based on following conditions, If,
Ticket number, origin, FB Data, Desc, pax name is same i need to delete all rows except the Row which has Destin filled in. In the above example I need rows only with NBO
Result should be as follows,
Ticket NumberOriginSectorDescFB DataPax NameClassPointO CCRegionDestin
976533060397MAADXB-NBOCDHJKL3SD RAJESHFirstNBO--NBO
976533060398MAADXB-NBOCDHJKL3SD RAJESHFirstNBO--NBO
I need one more criteria to be tested the above result. IF,
origin, FB Data, Desc, pax name is same and ticket no is A1+1 i need to delete the second row
Final result should be
Ticket NumberOriginSectorDescFB DataPax NameClassPointO CCRegionDestin
976533060397MAADXB-NBOCDHJKL3SD RAJESHFirstNBO--NBO
View 2 Replies
View Related
Mar 29, 2012
I need a macro that loops through all rows (With the exception of the first row) and looks for two conditions. If those two conditions are met, I'd like for it to delete the row.
The first condition is if Column O does not contain a certain phrase "VTX" VTX isn't the complete value of the column, it might just be contained within a few other notes in that column.
The second condition is if Col S equals "COMPLETE/FOLLOW-UP IMAGING".
So if these two conditions are met, Col O does not contain the word "VTX" and Col S equals "COMPLETE/FOLLOW-UP IMAGING", then that row should be deleted.
View 9 Replies
View Related
Nov 3, 2006
I have a worksheet used for inventory. In Column A is the quantity (to be entered manually). In Column B is the product description. In Column C is the price of the product, and Column D the total price (column C price x the quantity entered in Column A). At the bottom of the worksheet is a grand total. Also, Column B (products) is grouped into subheadings by the supplier each product came from (for example, row 6 has the title PPG, and then rows 7-137 list every product from PPG).
The calculations in this worksheet work fine. What I am trying to do is, using a macro once all of the appropriate quantities are entered in column A, automatically hide every row of product that does not have a quantity. The tricky part is, if no products under a given supplier subheader are entered, the subheader also hides, and if a quantity is entered, that subheader shows. For example, if I have no quantities under any products for PPG, then the PPG subheader hides, but if just one quantity is added, PPG shows. Also, this list will be constantly updated, new products will be put in and taken out all of the time, so I cannot base the macro on a specific number of rows.
View 2 Replies
View Related
Mar 2, 2006
I have a report in which I need to delete the entire row for each cell in Column A that has the name "Defacto" in a certain location in that cell. I am trying to use VBA code in conjuction with the "MID" function [i.e., Mid(Cell.Value, 8, 7) = "Defacto"]. This is the code I came up with (but, obviously, it doesn't work):
Sub DeleteRowOnCondition()
Range("A2").Select
Range(ActiveCell, ActiveCell.End(xlDown)).Select
For Each Cell In Selection
If Mid(Cell.Value, 8 , 7) = "Defacto" Then Rows.Delete
Next Cell
End Sub
As well, there is another worksheet in the same report in which I need to delete all the rows that do NOT meet that condition (while retaining the ones that do).
View 9 Replies
View Related
Aug 7, 2007
I am having a problem finding or creating a macro for what i am needing to do. I have a workbook with 2 worksheets (2 months july and august) to figure out a billing process.
I need to be able to First of all search each value in Column A on sheet 2 (august) to Column A on sheet1 (July).
My sheet is set up like this where ID is a buyer and Products 1,2,3...are if they have purchased that product from us
A B C D
1 ID Product_1 Product_2 Product_3
2 100 0 0 1
3 200 1 1 0
4 300 1 0 0
5 400 0 1 0
Better Picture representation attached
Both worksheets are very similar but August may have some changes from July such as new ID's and changed prduct purchases. What I need to do is have each ID in Column A be compared to Column A in the July sheet, but it may not always be the same cell (because of new ID's added they are moved around)..so it need to search for the same ID first then compare. Once it finds the ID, I then need it to compare the rest of the row (the product info) for that ID to see if any products were added or changed to determine billing. And for any changes that are found in the comparison, I need them to be highlighted.
Now in the case that a new ID was added...it wont be in the July sheet, so the whole row would need to be highlighted to notify of a new ID and new billing needs to be added.
This way the billing person can look at the sheet, see the highlited changes and see what is new or needs to be added to a previous ID's billing. Currnelty they are looking at it manually to see if there are changes.
View 9 Replies
View Related
Jun 5, 2014
Maybe this has been taken care of in another thread, but still:
ROW ID NUM OCC K OCC I
1 222222 0 0
2 222222 0 0
3
4 333333 0 0
5 333333 0 0
6 333333 0 0
7
8 444455 1 1
9 444455 1 1
I have a situation like above, but what I want to do is:
=FOR(ROW1:ROW9, IF COUNT ROWS(ID_NUM)>= 2,
(create name for set?)
AND
IF OCC_K AND OR OCC_I VALUES >= 0,
THEN DELETE ROWS(within set) >=2
Or more simply:
If there are rows with multiple Accident ID numbers, name that set,
and if OCC_K and/or OCC_K values are BOTH >= 0,
then delete all duplicate rows?
Yes I figure there needs to be some way to distinguish Row 1 from Row 2, (flagging one of the two?) so that ROW 2 can be identified, and similarly with Row 4 from Row 5 from Row 6, but the general flow of commands is what I'm trying to get at.
Is it also possible to use AND and OR in the same line? Or BOTH?
(I have other variations on this that I also like to ask about, such as multiple rows within a set that meet certain conditions that are identified in a different field, but for now this is a simpler version.)
I would like to think I'm not going to need a macro, and that I can do this in a Formula.
View 10 Replies
View Related
Jan 4, 2013
I have two worksheets (Sheet1 and Sheet2). Based on meeting a condition on Sheet1 AND Sheet2, I'd like to use macros to automatically hide rows on Sheet2.
Sheet1 sample:
Type
Selection
[Code]...
The conditions are: If on Sheet1, a Type has the Selection "Include", then any rows on Sheet2 which have that same Type are shown (ie. not hidden).
If on Sheet1, a Type has the Selection "Exclude",then any rows on Sheet2 which have that same Type are hidden.
So in the example tables above, if ONLY Type A = Include, then on Sheet2, the rows for Sample URL1 and Sample URL2 are shown, and the others are hidden.
Also in the example tables above, if Type A = Include AND Type B = Include (and all other Types are Exclude), then on Sheet2, the rows for Sample URL1, Sample URL2 AND Sample URL3 are shown, and the others are hidden.
I'm fine with the concept of If... And... on the same worksheet, it's trying to get it to look at two separate worksheets I'm struggling with!!
View 3 Replies
View Related
Jan 14, 2013
I have a workbook with two worksheets, Sheet1 and Sheet 2. Based on the data entered in the 2nd column on Sheet1, I'd like a macro which hides rows for Events which do not meet the criteria entered on Sheet1.
So in the example below, on Sheet2, I only want to see rows where the Country=Scotland, AND the Location=Glasgow, AND the Start Date is greater than (or equal) the Start Date on Sheet1.
Sample of Sheet1
Country
Scotland
Location
Glasgow
Start Date (dd/mm/yyyy)
30/04/2013
[code]....
So in this scenario, only the FIRST row meets the 3 criteria (Scotland, Glasgow, date after 30th April), thus all the other rows should be hidden.
View 6 Replies
View Related
Jun 1, 2008
I am trying to query a names sheet where each row may contain more than one occurence of a member ID. There are no duplicate rows ( records), because the dates are different for all rows.
1. I want to retrieve all of the rows from the names sheet that match a unique member ID. So far I only get one row.
2. And if mistype the number, it gives me a wrong record .I would like to get an error message that if I don't get a match, that it appears in the somewhere like dialog box or even entry in one of the cells that no name exits.
View 4 Replies
View Related
May 7, 2014
I have a spreadsheet that is split in two parts , one with headers in row 16 with data flowing down to row 190. In row 192 I have another set of headers with data flowing down from that to row 300.
I have a userform (roughly at cell B13 in the attached) that filters the first block of data into either Company, Syndicate, EU Corporate or ALL. (ignore the other filters) which feature in range B18:B190
What I want it to do, is that when one of the three options is selected, ie Company, is that all rows from 193 down are hidden other than those that are also Company (in the test case there is just one row). The same is true for when Syndicate or EU Corporate are selected in the userform, and if the ALL is selected then none are hidden.
View 2 Replies
View Related
Jan 2, 2009
I need to write a macro that will hide several rows if a calculated date's month is not within the month of the report.
Example:
If month of date in cell B20 is not the same as the month of date in cell A5
then hide rows 20 thru 30 if it is the same month, display rows 20 thru 30.
I need to do this comparison twice. If month of date in cell B40 is not the same as the month of date in cell A5 then hide rows 40 thru 50 if it is the same month, display rows 40 thru 50. The dates in B20 and B40 are the result of a calculations (Date in cell A5 plus some number of days) if that makes any difference. I don't think it should.
View 3 Replies
View Related
Apr 11, 2009
I need to filter out rows, based on a specific value in column A, (documents on file for the clients), then check column C (last name) and D (client first name), which can have the same client listed multiple times, based on how many different documents are on file ......
View 12 Replies
View Related
Oct 6, 2009
What am I doing wrong here?
I have a code and it doesn't error out, but it won't hide the rows either. I'm pretty sure the red is what needs to be altered. I've tried adding "Selection.", "Rows." and "Cells." and none of them are working.
View 12 Replies
View Related
Dec 26, 2009
I want a code to Hide the row if "sum of numbers in columns three thru last column" = 0. Following is a code I use to delete a row if that is blank. The difference here is that I dont want to to check first two columns and I want to hide them rather than deleting.
View 4 Replies
View Related
Nov 18, 2011
I am using windows 7, and excel 2007. I want to hide rows bases on a value in cell G2 which is a date field
Example, if G2 is greater than 11/16/2011 then hide rows 1969 through 2032.
View 6 Replies
View Related
Mar 27, 2012
With a piece of code that will hide an entire row if a cell value in that row does not equal the cell value of another row.
Example
Cell d3 = Feb 2012.
Range C5:c252, = a mix of Feb 2012 and Mar 2012.
I want to hide all the Mar 2012.
However if Cell d3 = Mar 2012 then the range C5:C252 will also = Mar2012
I want to see all the rows within that range.
View 4 Replies
View Related
Apr 12, 2012
I am creating a survey and have used combox,i want hide rows if the result in the combobox is no
View 1 Replies
View Related
Apr 9, 2014
I am trying to auto hide rows in a spread sheet. the start row will always be 55 and the end row will be 55 + the value of cell A38 in sheet titled "Main".
View 2 Replies
View Related
Dec 30, 2009
I wrote some simple code to work through a number of rows and hide the rows which contain a value of "XXX". For some reason, when the code hits the line denoted with? it hides the first row of "XXX"'s but then starts all over again at very first line of code outside the loop.
Sheet1. Range("start_1").Select 'cell c53
Do Until ActiveCell.Value = "EOF" 'cell c266
If ActiveCell.Value = "XXX" Then
Selection.EntireRow.Hidden = True '????
ActiveCell.Offset(1, 0).Select
Else
ActiveCell.Offset(1, 0).Select
End If
Loop
View 2 Replies
View Related
Apr 4, 2008
I have the following code to hide rows based upon whether or not the cell in column A is black or not.
Sub hide_black()
Dim Rng As Range
Dim MyCell As Range
Set Rng = Range("A2:A36635")
For Each MyCell In Rng
If MyCell.Interior.ColorIndex = 1 Then
MyCell.EntireRow.Hidden = True
End If
Next MyCell
End Sub
I was thinking of taking this one step further and having the rows hide automatically once the cell is turned black allowing the user to bypass having to click on a macro button.
View 6 Replies
View Related
Dec 13, 2013
In this example on Sheet 2, I'm trying to hide rows 1-6 if 'E6' is 0, and hide rows 15-26 if 'E18' is 0. These cell values are equal to the same cell in Sheet 1.
I've tried different codes I've found online, but I'm not very experienced with VBA so I can't get it to work. I can get rows 1-6 to hide, but it doesn't do it automatically whenever a zero is inputed into Sheet 1. It only works if I enter something into another cell on Sheet 2.
VB:
Private Sub Worksheet_Change(ByVal Target As Range)
If Range("E6") = 0 Then
Rows("1:6").Select
Selection.EntireRow.Hidden = True
[Code]...
View 5 Replies
View Related
Jun 17, 2009
I'm using column A as a reference. My data starts in cell A3.
Whenever theres a zero in any cell in column A I would like that row to hide.
If the row was hidden and the value changes to any number greater than zero I need the row to unhide.
I can record two macros for the hide/unhide part of this but I dont understand how to run them based on cell value.
View 14 Replies
View Related
Jan 8, 2005
I have a shared worksheet that has many rows of data... but only certain rows are relevant to each specific users. I would like each user to be able to select their name from a drop-down list in order to have all rows that are not important to them be hidden. I can put the name of the user in column 'A' in each row they need to see, but how could I make all rows that do not contain their name in column 'A' hide? In other words, if 'Bill' is selected from a drop-down list, only rows that contain 'Bill' in column 'A' would be seen.
View 9 Replies
View Related
Jul 11, 2007
I am trying to implement the following:
After the user selects something using the validation list in cell F38, the macro should check in column Q in the rows 44 till 425 for "hide". For each row in which it finds "hide" the entire row should be hidden.
I have the code below but it does't work yet. It calculates for ages and afterwards only the first 2 rows of the 381 are hidden (probably because the third row is not "hide").
Code:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim MyRange As Range
Dim ThisCell As Range
Target = Range("F38")
[code].....
View 9 Replies
View Related
Jun 17, 2003
Like to create a macro (button) to hide / unhide rows based on a cell value
Example
A1=No then hide roa A
C1=No then hide row c
View 9 Replies
View Related
Nov 16, 2011
I have a vba to hide certain rows based on 4 values (either 15, 20, 25, 30) are the choices in the 'ComboBox' drop down list. I also have the rows grouped so i need to make sure to collapse those back each time. Here is the vba i'm using, but its not quite right for some reason.
PHP Code:
Private Sub ComboBox1_Change()
If Range("J8").Value = "15" Then
Range("A185:A244").EntireRow.Hidden = True
Range("A245:A304").EntireRow.Hidden = True
Range("A305:A364").EntireRow.Hidden = True
Range("A365").EntireRow.Hidden = False
[Code]...
View 1 Replies
View Related
