Highlight Non Matching Rows Based On Conditions
Aug 7, 2007
I am having a problem finding or creating a macro for what i am needing to do. I have a workbook with 2 worksheets (2 months july and august) to figure out a billing process.
I need to be able to First of all search each value in Column A on sheet 2 (august) to Column A on sheet1 (July).
My sheet is set up like this where ID is a buyer and Products 1,2,3...are if they have purchased that product from us
A B C D
1 ID Product_1 Product_2 Product_3
2 100 0 0 1
3 200 1 1 0
4 300 1 0 0
5 400 0 1 0
Better Picture representation attached
Both worksheets are very similar but August may have some changes from July such as new ID's and changed prduct purchases. What I need to do is have each ID in Column A be compared to Column A in the July sheet, but it may not always be the same cell (because of new ID's added they are moved around)..so it need to search for the same ID first then compare. Once it finds the ID, I then need it to compare the rest of the row (the product info) for that ID to see if any products were added or changed to determine billing. And for any changes that are found in the comparison, I need them to be highlighted.
Now in the case that a new ID was added...it wont be in the July sheet, so the whole row would need to be highlighted to notify of a new ID and new billing needs to be added.
This way the billing person can look at the sheet, see the highlited changes and see what is new or needs to be added to a previous ID's billing. Currnelty they are looking at it manually to see if there are changes.
View 9 Replies
ADVERTISEMENT
Nov 21, 2006
I need to run a macro that compares two columns and Highlights the ineuality rows in both columns
View 9 Replies
View Related
Nov 17, 2009
I want to count all instances if the following conditions are true. In quotations, are the names that I am using for column ranges. Here are my conditions, I want to count the rows that have the following conditions.
When "dates" or J2:J25 is less than or equal to today's date
AND
"HTeam" or W2:W25 is equal to Civil
AND
"Percent" or K2:K25 is equal to 100
View 4 Replies
View Related
Aug 5, 2009
I want to highlight A1 red if C1 is greater than 55. Is this possible?
View 3 Replies
View Related
May 15, 2008
I am seeking assistance with code for column H to be highlighted when I have a value of "Pending" or "Work In Progress" is present in column E?
View 3 Replies
View Related
Mar 9, 2013
I have a list of names in Column B (Starting at B5) with assignments to them in Column A. I want the people who receive the file, to enter their name in B1 exactly as it appears multiple times in sheet. And hope to use conditional formatting to highlight (change the back ground color) of each cell their name appears in.
I've used a number of formulas in the Conditional formatting including "=(ISNUMBER(MATCH($B5:$B100,$B$1,0)))", Countif's and "Not(isnumber)..." but can't find a formula that picks up the whole text.
View 3 Replies
View Related
Jun 26, 2014
I thought I would get this on my own, but I digress.
I received sample code to populate a listbox from tab names of a workbook, yay!
What I have attempted is to use a user form, enter a string in a textbox and if it match's any string in the list box, then highlight.
Basically, its a simple search engine.
View 4 Replies
View Related
Oct 17, 2007
I would like to highlight cells is two conditions are met:Cell = 0Offset(0,-1)>0I tried the conditional format wizard and entered a formula: =IF(AND($J2=0,$I2>0)) But I keep receiving formual errors, which I understand, because it appears to be incomplete formula. But I am not sure what else I need to add to the formula in the conditional format wizard
View 2 Replies
View Related
Apr 3, 2013
I'm trying to hide rows in an excel sheet based on two stipulations. I want to hide the row if it finds a particular value in column B and a different particular value in column K, otherwise i want it to do continue looping until it has hidden all rows that meet both stipulations.
VB:
Sub hide_loop()
Dim bl As Excel.Range
Dim blrange As Excel.Range
[Code]....
Currently I have tried different approaches, like a Do Loop, but I could not make that work, and this seems closer. The problem I'm having right now is that with this loop it hides everything found in column B regardless of what is in column K. I suspect this is because of the code following the if statement.''
View 9 Replies
View Related
Dec 30, 2011
I have the following data
Ticket NumberOriginSectorDescFB DataPax NameClassPointO CCRegionDestin
976533060397MAADXB-DFWCDHJKL3SD RAJESHFirstDFW---
976533060397MAALIT-DFWCDHJKL3SD RAJESHFirstDFW---
976533060397MAADFW-DXBCDHJKL3SD RAJESHFirstDXBUS--
976533060397MAADFW-LITCDHJKL3SD RAJESHFirstLITUS--
976533060397MAADXB-NBOCDHJKL3SD RAJESHFirstNBO--NBO
976533060397MAANBO-DXBCDHJKL3SD RAJESHFirstDXB---
976533060398MAADXB-DFWCDHJKL3SD RAJESHFirstDFW---
976533060398MAALIT-DFWCDHJKL3SD RAJESHFirstDFW---
976533060398MAADFW-DXBCDHJKL3SD RAJESHFirstDXBUS--
976533060398MAADFW-LITCDHJKL3SD RAJESHFirstLITUS--
976533060398MAADXB-NBOCDHJKL3SD RAJESHFirstNBO--NBO
976533060398MAANBO-DXBCDHJKL3SD RAJESHFirstDXB---
I need to delete rows based on following conditions, If,
Ticket number, origin, FB Data, Desc, pax name is same i need to delete all rows except the Row which has Destin filled in. In the above example I need rows only with NBO
Result should be as follows,
Ticket NumberOriginSectorDescFB DataPax NameClassPointO CCRegionDestin
976533060397MAADXB-NBOCDHJKL3SD RAJESHFirstNBO--NBO
976533060398MAADXB-NBOCDHJKL3SD RAJESHFirstNBO--NBO
I need one more criteria to be tested the above result. IF,
origin, FB Data, Desc, pax name is same and ticket no is A1+1 i need to delete the second row
Final result should be
Ticket NumberOriginSectorDescFB DataPax NameClassPointO CCRegionDestin
976533060397MAADXB-NBOCDHJKL3SD RAJESHFirstNBO--NBO
View 2 Replies
View Related
Mar 29, 2012
I need a macro that loops through all rows (With the exception of the first row) and looks for two conditions. If those two conditions are met, I'd like for it to delete the row.
The first condition is if Column O does not contain a certain phrase "VTX" VTX isn't the complete value of the column, it might just be contained within a few other notes in that column.
The second condition is if Col S equals "COMPLETE/FOLLOW-UP IMAGING".
So if these two conditions are met, Col O does not contain the word "VTX" and Col S equals "COMPLETE/FOLLOW-UP IMAGING", then that row should be deleted.
View 9 Replies
View Related
Mar 2, 2006
I have a report in which I need to delete the entire row for each cell in Column A that has the name "Defacto" in a certain location in that cell. I am trying to use VBA code in conjuction with the "MID" function [i.e., Mid(Cell.Value, 8, 7) = "Defacto"]. This is the code I came up with (but, obviously, it doesn't work):
Sub DeleteRowOnCondition()
Range("A2").Select
Range(ActiveCell, ActiveCell.End(xlDown)).Select
For Each Cell In Selection
If Mid(Cell.Value, 8 , 7) = "Defacto" Then Rows.Delete
Next Cell
End Sub
As well, there is another worksheet in the same report in which I need to delete all the rows that do NOT meet that condition (while retaining the ones that do).
View 9 Replies
View Related
Jan 16, 2014
I have a spreadsheet with month names in column A10 and down and want to highlight the row based off a cell(which will be A3) so if cell A3 = Nov it would highlight all rows that have Nov in column A. I don't want to highlight the entire row just columns A.
View 5 Replies
View Related
Aug 23, 2007
I need VBA help. I know how to highlight every other row but what I can't do is highlight a row if column values are the same. For example I have 5 columns but only the first one has the data I'm interested in. If the data in the first column looks something like this:
1
2
3
4
4
5
5
5
6
6
6
7
.
.
I want to highlight every other row that has similar values therefore I want to highlight row 2, both row 4s, and three 6s...etc.
I also want it to start on the 2nd row of every page until the last row of every page which is row 37 in my case.
View 9 Replies
View Related
Jun 5, 2014
Maybe this has been taken care of in another thread, but still:
ROW ID NUM OCC K OCC I
1 222222 0 0
2 222222 0 0
3
4 333333 0 0
5 333333 0 0
6 333333 0 0
7
8 444455 1 1
9 444455 1 1
I have a situation like above, but what I want to do is:
=FOR(ROW1:ROW9, IF COUNT ROWS(ID_NUM)>= 2,
(create name for set?)
AND
IF OCC_K AND OR OCC_I VALUES >= 0,
THEN DELETE ROWS(within set) >=2
Or more simply:
If there are rows with multiple Accident ID numbers, name that set,
and if OCC_K and/or OCC_K values are BOTH >= 0,
then delete all duplicate rows?
Yes I figure there needs to be some way to distinguish Row 1 from Row 2, (flagging one of the two?) so that ROW 2 can be identified, and similarly with Row 4 from Row 5 from Row 6, but the general flow of commands is what I'm trying to get at.
Is it also possible to use AND and OR in the same line? Or BOTH?
(I have other variations on this that I also like to ask about, such as multiple rows within a set that meet certain conditions that are identified in a different field, but for now this is a simpler version.)
I would like to think I'm not going to need a macro, and that I can do this in a Formula.
View 10 Replies
View Related
Mar 4, 2008
First, I realize there are plenty of hide cells threads but I have yet to find one pertaining to my situation and I apologize in advance if I this solution has already been posted.
The Problem: I am looking for macro code to a toggle button that will hide various rows that have no value between multiple sets of rows. The toggle should refresh the format of the rows as the information that was blank could later on have value.
The Setup: For each set of rows, the first row will have the label T and the last will have the label S. In between T and S there can be data. If the cells between T and S are all empty then the rows including T and S should be hidden other wise only the non blank cells between T and S should be visible.
The Reason: I have a master database worksheet, there are four copies of the master database worksheet each entitled phase1, ""2, ""3, & ""4 respectively. These phase sheets are linked to the master sheet and show the entire row's data based upon the beginning cell of each row showing either phase1, ""2, & so on.. The data is broken up into many sub databases and traditional auto filters or advanced auto filters will not be applicable as the title of the data and the empty rows in between need to be hidden if the data is empty.
View 9 Replies
View Related
May 29, 2012
I am trying to write a procedure to highlight entire rows in VBA based on a entry in column A.
I have the below which works for say 1000 rows but breaksdown when I have 58,000 rows which is the usual amount of data I will have.
Below is the code I have so far. It appears when I debug it breaks on the red line with type mismatch.
Option Explicit
Sub RemoveBH()
Application.ScreenUpdating = False
Dim intcount As Long
For intcount = Cells(1, 1).CurrentRegion.Rows.Count To 1 Step -1
[code].....
View 7 Replies
View Related
Apr 21, 2014
Copy rows from one Sheet to another based on a separate cell value But specifically, I am trying to copy row values from Columns C through column Z in Worksheet 1 of file POHeader.xlsx to row values Columns N through AK in file POReceiv.xlsx when the (Purchase Order #) values in Column A of each file match.
The reason is behind this is - one file has the unique Purchase Order number as the key without associated parts and the other file has the associated part number as the key with purchase order number attached.
I don't know whether I need to use VBA or if I can just use an index and match function.
View 9 Replies
View Related
Jan 4, 2013
I have two worksheets (Sheet1 and Sheet2). Based on meeting a condition on Sheet1 AND Sheet2, I'd like to use macros to automatically hide rows on Sheet2.
Sheet1 sample:
Type
Selection
[Code]...
The conditions are: If on Sheet1, a Type has the Selection "Include", then any rows on Sheet2 which have that same Type are shown (ie. not hidden).
If on Sheet1, a Type has the Selection "Exclude",then any rows on Sheet2 which have that same Type are hidden.
So in the example tables above, if ONLY Type A = Include, then on Sheet2, the rows for Sample URL1 and Sample URL2 are shown, and the others are hidden.
Also in the example tables above, if Type A = Include AND Type B = Include (and all other Types are Exclude), then on Sheet2, the rows for Sample URL1, Sample URL2 AND Sample URL3 are shown, and the others are hidden.
I'm fine with the concept of If... And... on the same worksheet, it's trying to get it to look at two separate worksheets I'm struggling with!!
View 3 Replies
View Related
Jan 14, 2013
I have a workbook with two worksheets, Sheet1 and Sheet 2. Based on the data entered in the 2nd column on Sheet1, I'd like a macro which hides rows for Events which do not meet the criteria entered on Sheet1.
So in the example below, on Sheet2, I only want to see rows where the Country=Scotland, AND the Location=Glasgow, AND the Start Date is greater than (or equal) the Start Date on Sheet1.
Sample of Sheet1
Country
Scotland
Location
Glasgow
Start Date (dd/mm/yyyy)
30/04/2013
[code]....
So in this scenario, only the FIRST row meets the 3 criteria (Scotland, Glasgow, date after 30th April), thus all the other rows should be hidden.
View 6 Replies
View Related
Jun 1, 2008
I am trying to query a names sheet where each row may contain more than one occurence of a member ID. There are no duplicate rows ( records), because the dates are different for all rows.
1. I want to retrieve all of the rows from the names sheet that match a unique member ID. So far I only get one row.
2. And if mistype the number, it gives me a wrong record .I would like to get an error message that if I don't get a match, that it appears in the somewhere like dialog box or even entry in one of the cells that no name exits.
View 4 Replies
View Related
Dec 7, 2011
I have a spreadsheet and I was wondering if there is a way to copy from a specific range in say A1:A5 in Sheet1 and paste into Sheet2 where the column matches cell A1 in Sheet1.
I am trying to do this in VBA and I was wondering if there is a way to do this.
View 9 Replies
View Related
Mar 14, 2012
How do you highlight a row when conditions in two cells of that row are met? For example, I have a spreadsheet with a STATUS column ($A) and a TYPE column ($E). When the status is "open" and the type is "1", I want the row to be green. But when the status changes to "closed" I want the row to be a different color or no color at all. How do I do this?
View 3 Replies
View Related
Sep 17, 2009
I have attached a spreadsheet as an example.
I have two lists, List 1 and List 2.
I am trying to figure out with a compare between ID's if the individual from List 2 exists in List 1, if so, I want to figure out if the amounts paid are a perfect match AND if the amounts paid are from identical groups.
There are members who don't exist in both Lists.
I am unsure if this is a VLOOKUP Formula.
View 7 Replies
View Related
Jan 20, 2013
My task is to combine two large databases into one spreadsheet by extending the number of columns. The data from each database is 90% matching based on an identification number, however occasionally there are additional rows or unmatched identification numbers that need to be kept for analysis.
When this happens, there needs to be a blank row inserted to represent the missing data in the rest of the corresponding row.
I am having trouble finding a quick way to do this because I have approximately 12,000 rows (and columns up to DV when combined).
for example:
p1
data
data
data
data
p2
data
data
data
data
[Code] .....
needs to become:
p1
data
data
data
data
[Code] .....
I am guessing I will need a macro of sorts, So far I have made one column that tell me if the ID's are matching or not (1 or 0) and if they are not matching (0) I manually insert the rest of the row that is missing or make space for the duplicate data (which needs to remain).
View 5 Replies
View Related
Jun 27, 2014
So I need highlighting certain cells. I have a sheet that keeps track of people's points over a series of races to determine who will make the "team". The team is selected one at a time based on the most points, starting with the leftmost column and working right. What I would like to do is highlight the highest score in each column (which I know how to do) but then tell the sheet to ignore all the other numbers in that same row. That way if the person with the most points in column one (M in my sheet) also has the most in column two (N in my sheet) Excel will ignore that number in the second column and highlight the next highest number.
I'll attach my file so there is a visual reference : ODN Points.xlsx
View 3 Replies
View Related
Oct 2, 2009
I have a spreadrsheet (sample attached) which populates a calender due to columns on seperate sheets being filled with text and corresponding dates. I started using conditional formatting to highlight certain conditions but soon realised I need more than 3 so I tried looking into VBA - and failed.
All the cells in the calender have the 3 usual conditions associated to them but in addition I need to be able to colour individual cells if they contain certain phrases or parts of phrases like "BP" or "Current"
View 3 Replies
View Related
Mar 5, 2008
I have a spreadsheet of actions/tasks. I have a column with the expected completion dates of each action and another column stating whether the action/task is "open" or "closed". I would like to highlight any actions that have gone past their expected completion date and are marked as still being "open". Obviously i dont want any row that are closed to be highlighted. I know the =TODAY()- B1>0 formula will highlight the dates cell that have expired but how do i extend this formula to what i require.
View 5 Replies
View Related
Feb 17, 2008
I would like to select a cell inside my workbook and when it is selected it automatically highlights similar value cells in the same workbook. Is that possible? A Look at the attachment should give you a much better idea as to what I am talking about.
View 3 Replies
View Related
Sep 19, 2013
In column A, I need to highlight the cells green if the value is less than < the values in columns B and C, yellow if A = either B and C, and red if A is greater than B and C. But I only want the formatting to stay in column A. I'm using Excel 2010 and Windows 7.
A
B
C
Green->
444
512
482
Yellow->
364
571
364
Red->
101
99
87
View 2 Replies
View Related
