I need a formula that will look up a cell to get a figure from, but there is three of the same name (sometimes more, depending on different products sold) i.e. "Dept Total" (shown below & attached for easier reading) ....
View 7 RepliesI have a table
COL1 Col2
red 1
blue 2
yellow 3
then I have a column that just has the names
Col1 Col2
red
blue
yellow
I need a way to fill in col2 with the correct value.
Attached you will find the spreadshhet in question. If you click on the click here button input the following info:
8.0
3508949
80
0
0
25
the sheet will auto populate all numbers. this part is working properly. MY issue is if you look at the Bad Debt number, the correct response should in cell f21 should be $636.46 because in order to hit the next level of pay, you must at least hit $3,424,082.00. I can not figure out how to get the correct formula that will put the right pay out. Basically in order to hit a certain level of payout you must hit that next number, even if you are a $1 higher you can not get the pay out. So for example if your bad debt is $3,424,083 you would be paid out at 100%, not 120%.
I have a file which ask for UserId and password. If password is correct, the time stamp should be recorded on the worksheet. However I have some slight probelms on the code I am working on. can someone help me check my coding?
View 14 Replies View RelatedI have one work sheet (worksheet #1) that everyone in the company uses. With this worksheet they submit orders to my department.
When I receive it (worksheet #1) I have a macro built in so that all i have to do is click a button and the sheet get's logged onto a certain workbook (workbook #1) on the appropriated tabbed sheet.
On my log workbook (workbook #1) I have two tabed sheets "2005" and "2007", and all of the worksheet#1's go to the next line on "2007"
On occasion a sales person will open up an old worksheet and the macro will log it onto "2005".
I want to create a macro for (workbook #1) that goes something like this:
If any files attempt to write to sheet "2005"
do not allow or (False)
move line item to sheet "2007" to the next open line.
I want to be able to look up a cell and do an index lookup on the worksheet with that cells text. Eg.
=index('B2'!A2:E500,match(1,('B2'!A2:A500=E2)*('B2'!C2:C500=D2),0),5).
Where 'B2'! is the worksheet I want to lookup. If cell B2 contained BAZ, the index would lookup worksheet BAZ. If B2 contained TAZ, the index would lookup worksheet TAZ.
need to enter data of various patients in each row.each patient variables being entered in different rows.but problem is certain reports have multiple values pertaining to different dates but they are of the same patient. how is it possible to enter different values but for the same individual??
View 9 Replies View RelatedHow to create a search formula that will look up a person's name in a given worksheet in a specified cell?
View 8 Replies View RelatedI'm trying to create a formula that will added the correct amount in the correct cells, I have create a dunny sheet in trying to achieve this. If Cell B8:B11 = ABS or Dum that any points won should be added to Cell L8:L11 right now its adding it into K8:K11. If Cell B8:B11 = is Blank any player points should be added to cells K8:K11. I'm using this formula throughout cells K8:K28 =IF(J8>J25,1,IF(AND(J8<>0,J8=J25),0.5,0)) Any thing in red is incorrect anything in blue is what I'm trying to achieve.
View 4 Replies View RelatedI have a form on which I select a date (using a calendar form) and on the form it works perfectly. The date is in the correct dd/mm/yyyy format for example (03/04/2013 - 3rd April 2013), I then insert this date into a worksheet and it comes out in the correct format, but it is actually turning the dates around so where it should be putting 3rd of April (03/04/2013), it's inserting 4th March (04/03/2013) instead. It looks very much like the form sees the date in dd/mm/yyyy format and the worksheet when taking the data from the form thinks it in US format (mm/dd/yyyy).
[Code] .....
We receive about 20 sales files of several hundred lines of data each day from various agencies. I want to create a macro / VBA code which checks that the data submitted is correct so that we can upload it into our database without import errors and / or having to manually check each line of data.
I envisage something like an output report:
#####################
149 entries
Column A - Date - OK
Column B - Customer_Phone - Errors (Should be 11 digits)
Row 21 - Customer_Phone - Error (Not 11 digits)
Row 108 - Customer_Phone - Error (Contains letters)
Column C - Outcome - OK
Please correct and re-check.
#####################
I have a table with 3 columns of dates and then a column with Set # that I
feel in the box #.
I need to see how many items processed for each set per day.
Example:
[url]
The problem is that it counts the correct amount but not with the correct
dates.
The formula that I use is:
=SUMPRODUCT(--($I$3:$I$8<>"")*(($C$3:$C$8=39601)+AND($E$3:$E$8=39601)+AND($G$3:$G$8=39601)))
I'm looking to create a macro that will take data from an input sheet, and paste it into a cell in another worksheet, based on criteria specified in sheet1.
Specifically in the attached example, the macro would copy the data in cells C8:C10 of sheet 1, then paste them into sheet 2 based on the data specified in cell B3 i.e. it would paste them into the column headed Mar-09. I intend to make this cell a drop down, so that the user can then select the next reporting month and run the macro again to paste the data into the Apr-09 column.
I have worksheet 1 and worksheet 2. I have a different list of names in column A in both worksheets. Some of the names in worksheet 1 are in worksheet 2, but only a partial list. Worksheet 2 names are not in any kind of order and the rows do not match up with worksheet 1. In worksheet 1, column B is filled with each person's email address. In worksheet 2, column B NEEDS to be filled with each person's email address.
Is there a way for me to take each name, sequentially, on worksheet 2 and find that same name in worksheet 1, then pull the email address from column B (beside the name) and copy it to that cell in column B of worksheet 2?
I have one column: in the first cell comes text (beginning either with the letter "L" or "R") and afterwards, in the next cell, comes a number (either "7" or "8"). Basically the column is made up of alternating cells containing either text (code of a movie) or numbers (responses to the respective movies). I want to find a formula which writes either:
- "correct" if the number "7" follows a cell containing the letter "L" or an "8" follows a cell containing the letter "R";
or
- "incorrect" if the number "7" follows a cell starting with the letter "R" or the number "8" follows a cell starting with the letter "L".
Basically the 8 is always correct with an R and the 7 with an L: ...
I have a list of Grades (Job Description). Each of them is allocated a SCH No = SCH1 / SCH2 etc
I need a macro that will go through this list and copy the Grade into the correct SCH Column on Sheet List2.
The columns in List 2 then need to be sorted A-Z.
AddNamestolist.xlsx
I have 2 worksheets (worksheet 2 is Slicing and Worksheet 1 is Production).
Production worksheet D6 has a dropdown box for, 1, 2, 3, 4, 5, 6, 7, 1.1, 2.2, 3.3, 4.4, 5.5, 6.6 and 7.7.
In the Production worksheet, I have in cell E6 =IF(D6=1,"ONE",IF(D6=2,"TWO",IF(D6=3,"THREE",IF(D6=4,"FOUR",IF(D6=5,"FIVE",IF(D6=6,"SIX",IF(D6=7,"SEVEN")))))))
In the Production worksheet, I have in cell F6 =IF(D6=1.1,"ONE",IF(D6=2.2,"TWO",IF(D6=3.3,"THREE",IF(D6=4.4,"FOUR",IF(D6=5.5,"FIVE",IF(D6=6.6,"SIX",IF(D6=7.7,"SEVEN")))))))
How do I show in Slicing worksheet cell B6, either 'ONE', 'TWO', 'THREE', 'FOUR', 'FIVE', 'SIX', 'SEVEN' as i have the formula =PRODUCTION!E6&PRODUCTION!F6 and the cell shows '
1 is a Master sheets with all prices of products etc etc.
2nd sheet is an update of all products that have changed in price.
There is a unique code for each product.
What i was hoping for is a way where on the second sheet the product (using the unique codes assigned to the product) is looked up on the master sheet and the NEW price on the 2nd sheet replaces the OLD price on the Master sheet?
I want to be able to lookup if anywhere in a cell contains a word from a list of words, and then provides an output.
Column G:
VAT payment
HMRC payment
Pay VAT
I have a table on the side that shows:
Column Y Column Z
VATHMRC
HMRC HMRC
ie. If anything in column G matches one of the words in Column Y, then output the Column Z. I have use a Vlookup that works for the first two, as VAT is the first thing, but dont know how to make it work if the key word is in the middle of the cell.
I have a workbook with 2 different types of sheet - 1 containing source data and the others 'collecting' data from the source sheet, depending on what the sheet is for.
For example, the data source contains different pets, their names, ages and their owners.
The other sheets are on a one-per-owner basis.
What I would like to do is use a LOOKUP / MATCH function to lookup the owner name typed in cell A1 of the output sheet and match it with the corresponding owner name(s) on the source sheet. I would then like it to return with each pet and append the results on the sheet accordingly - like below:
John Smith (in cell A1)
Pet - Name - Age
-------------------
Dog - Rover - 3
Goldfish - Tom - 1
Gerbil - Chewit - 4
I have a list of abbreviations in Sheet 2 and Names of Companies (Full name of Company and short name) in Sheet 1.
What I need to do is check if the abbreviation used in the Short Name Field in Sheet 1 is correct based on the given abbreviation list in Sheet 2.
here is the example:
Sheet 1:
Fulll Name of Company
Short name
AMERIPRISE FINANCIAL, INC.
Ameriprise Fin
Sheet 2: Abbreviation List
Full Version
Abbreviation
Academic
Acad
Bank
Bk
Financial
Finl
in the abbreviation list the correct abbreviation for financial is Finl so the short name should have been "Ameriprise Finl" and NOT "Ameriprise Fin". I'd like the rows highlighted in yellow if it is incorrect.
I have two problems sort of rolled into one. I have a spreadsheet with a list of skills to perform in cells a2:z2. Under those I put in dates where those skills are performed so a3:a100 , b3:b100 and so on. At the moment I have the these dates populating another sheet with the list of skills going a2:a200 and the dates in b2:b200.
Annoyingly I have been asked set it up so it inputs the other way so my problems are: The skills in the second sheet are in a different order than in the first sheet so its not a straight correlation between the two so I would need to search for the title and match it to the second sheet. Then the second problem is as the will be numerous entries I need to find the next available space in the first sheet. So can you add data at the bottom of a list??
I have two worksheets in one document. On sheet 'M_Admission' there are numbers for each week. can those numbers be automatically copied to the correct cell on sheet 2 'M_Actual' See the attached Excel worksheet to see what I mean. (Excel 2002)
View 3 Replies View RelatedBelow is the code to look in a specified sheet and find the values in the row where the combobox value is found. These values that populate into the Listbox when a Combobox value has been selected, are in the same row as the Combobox value, but offset 20 - 29 columns.
All is good in this section of code.
The Listbox has 3 coulumns. It is populated as follows:
1st column is the header in Row 1 of the the columns
2nd column is the actual numerical values(minus another value offset 80 columns) in the combobox specified row, and
3rd column is the actual numerical value address in the combobox row.
Code:
Private Sub ComboBox1_Click()
Application.ScreenUpdating = False
If Me.ComboBox1.Value <> "" Then
Me.ListBox1.Clear
' On Error Resume Next
[Code] .......
The next code runs thwn the user double clicks a Listbox value. It basically enters the Combobox value and Listbox value to a sheet. All is good here, with the exception to placing the Listbox item address to the specified sheet cell.
For some reason i ALWAYS obtain the LAST possible address of the range of values (i = 20 - 29), instead of the actual item selected in the listbox.
Code:
Private Sub ListBox1_DblClick(ByVal Cancel As MSForms.ReturnBoolean)
With Sheets("DESPATCH")
.Activate
ActiveCell.Value = Me.ComboBox1.Value
[Code] .......
How to rectify this to obtain the correct listbox address ?
Trying to assign this cell's value to the correct sheet tab for the current month.
Trying this:
Code:
=IF(MONTH(A3)=5,'[Wholesales 2014.xlsx]May'!$P$1,0),IF(MONTH(A3)=6,'[Wholesales 2014.xlsx]Jun'!$P$1,0)
A3 is todays date. Wholesales 2014.xlsx]May is a seprate sheet for the month of may and so forth for june.
The problem is the p1 value is empty for the Jun sheet so I get an error: #VALUE! (I assume that is why I am getting the error?)
Using:
Code:
=IF(MONTH(A3)=5,'[Wholesales 2014.xlsx]May'!$P$1,0)
By itself works just fine. I need to set this up for future use, though.
I have a spreadsheet that has been sent to multiple clients. I have discovered an error in a few of the cells:
1. a link between two cells is broken so the correct number is not showing up in the cell. It is a simple formula ie: =A15, that I either forgot to put in or deleted in a fit of madness. It is in the same cell on the same worksheet in the workbook.
2. A hidden column on a worksheet has a formula that sums a range of cells. I have discovered that this range of cells is wrong. This error is duplicated on a number of worksheets in the workbook. The problem is that the error is in the same column in each worksheet but not in the same row.
Each worksheet is password protected. This is done through VBA code so the passwords won't be a problem.
The clients have already started working on the spreadsheet that I sent them and I want to send them a "fix" so that the correct formula will just update the spreadsheet they already have rather than me sending a completly new one and them having to start from scratch.
I had this wonderful spreadsheet set up with columns that appear and disappear and formulas galore so that the client didn't have to do to much work and then I find these errors after it has been sent. My testers let me down but that's life.
I tried both IF and LOOKUP and failed. I'm trying to search for values from one worksheet and identify whether or not those values exist in another worksheet. I attempted the following lookup in field A2:
=LOOKUP(B2,Sheet3!A$2:A$914,Sheet3!C$2:C$914)
B2 (thru B5000 or so) contains values I want to search for; sheet3!A$2:A914 is where I want to look and column C of that same sheet, entered the text "Yes" in an attempt to have the results list "Yes" for hits and N/A for misses. (All fields are text.) I copied the formula all the way down the sheet in column A. The result it is returning is N/A in A2 and Yes in A2 -to the bottom, which is incorrect.
Here's the data table being referenced
Rank
Week Ending
Name
Value
1
1/1
Apple
100
[Code] ........
Now on another sheet, I want to return the top two 'Name's and their values like below:
Name
Value
There is a fluctuating amount of rows in the first table, too. So what formula can I use to return the correct names and values on another sheet?
I'm thinking it will use some form of concatenate for the first and use a sumifs function for the value column..
I'm using VBA code to lookup a code and return the description of it from another worksheet.
It works perfectly when I copy the code from the other sheet into the cell used to lookup, or when I enter a code containing a letter. But as soon as I enter the code manually and the code consists of numbers only, it doesn't find the match on the other sheet.
Code:
If Item_insert = Item_codesheet Then
voucherSheet.Range(address).Offset(0, 1).Value = itemcodesSheet.Range("D" & j).Offset(0, 1).Value
End If
I have added watches and converted the codes to string and even though both would be strings, the code doesn't identify them as being similar.
Watch : : Item_codesheet : "700030 " : Variant/String : Module1.Item_to_Description
Watch : : Item_insert : "700030" : Variant/String : Module1.Item_to_Description
I have a workbook with 3 workshhets. In the first worksheet I have companies in a ranked order. Based on the company number, I need to return a value from another worksheet that also has the company number as the key.
The lookup worksheet is FY2008 with the company number in column D and the value to be returned in column F. I know it is simple for you Excel gurus but I am still getting my feet wet.