Gaining Correct Cell Found Address From Listbox Items
Feb 12, 2013
Below is the code to look in a specified sheet and find the values in the row where the combobox value is found. These values that populate into the Listbox when a Combobox value has been selected, are in the same row as the Combobox value, but offset 20 - 29 columns.
All is good in this section of code.
The Listbox has 3 coulumns. It is populated as follows:
1st column is the header in Row 1 of the the columns
2nd column is the actual numerical values(minus another value offset 80 columns) in the combobox specified row, and
3rd column is the actual numerical value address in the combobox row.
Code:
Private Sub ComboBox1_Click()
Application.ScreenUpdating = False
If Me.ComboBox1.Value <> "" Then
Me.ListBox1.Clear
' On Error Resume Next
[Code] .......
The next code runs thwn the user double clicks a Listbox value. It basically enters the Combobox value and Listbox value to a sheet. All is good here, with the exception to placing the Listbox item address to the specified sheet cell.
For some reason i ALWAYS obtain the LAST possible address of the range of values (i = 20 - 29), instead of the actual item selected in the listbox.
Code:
Private Sub ListBox1_DblClick(ByVal Cancel As MSForms.ReturnBoolean)
With Sheets("DESPATCH")
.Activate
ActiveCell.Value = Me.ComboBox1.Value
[Code] .......
How to rectify this to obtain the correct listbox address ?
View 1 Replies
ADVERTISEMENT
Feb 4, 2008
What I am trying to do is for example Sheet 1 has a range of names A1:A20 and on sheet 2 on non contigious ranges some values from the range on Sheet 1 shown here and there. What I would like is on a form ListBox1 shows all names used in Sheet2 and on ListBox2 all names that were not used.
View 4 Replies
View Related
Aug 29, 2007
I've got a workbook with a sheet for every month containing clients serviced in the specific month. I've found thread to complie a search box, which is great, but it gives me the value of the search. I need the search to take me to the sheet where the adress of the result is. Please see below the code for the search box i used.
Private Sub CommandButton1_Click()
Dim ws As Worksheet
Dim cl As Range, rng As Range
For Each ws In ActiveWorkbook.Worksheets
Set rng = ws.UsedRange
With rng
Set cl = .Find(Me.TextBox1.Value, LookIn:=xlValues)
If Not cl Is Nothing Then
Label1().Caption = (cl.Offset.Value)
End If
End With
Next ws
End Sub
View 9 Replies
View Related
Dec 18, 2008
When I use VLOOKUP formula within a VBA routine ex:
For LoopCounter = 1 to LastRow
With Worksheets("0MATERIAL")
.Cells(RowCounter, 5).FormulaR1C1 = "VLOOKUP(RC[-2],'0MAT_UNIT'!R1C1:R65520C12,4,FALSE)"
End With
RowCounter = RowCounter + 1
Next LoopCounter
How can I find out what row or cell address that the VLOOKUP found the data? The above code works perfectly but the problem is I need data from that same row in columns 4-11. I replicated the .Cells line above and made each one a VLOOKUP (for column 4, 5, 6, etc...) but this kills the performance. I have around 32,000 rows in sheet 0MATERIAL and around 50,000 rows within sheet 0MAT_UNIT
View 9 Replies
View Related
May 27, 2014
I have a userform where I can select multiple items in a listbox and add them to another. I also have the ability to filter the first listbox to make finding items easier. The issue I am having concerns the clear filter button. As currently designed, the clear filter button will reset the initial listbox back to its default values. Ideally, I would like it to reset to the default values excluding those values that currently in the second listbox.
The entire code is below for reference, but it's the sub ClearFilter_Click that I am struggling with.
[Code] ....
View 2 Replies
View Related
Feb 22, 2008
I have a spreadsheet containing a list of key fob numbers, key numbers, etc. I have 3 userforms with different for different options, i.e. Key fob no. search, key number search, room number search. I have set up the code for each of the userforms to search for the information entered in the textbox and then lists the info in the listbox which I can then click on the one of the listed items to take me directly to the place in the spreadsheet.
However since there are a range of different key numbers per key fob, I would like to know what code I can use to allow a range of information such as the key number and room number, etc to be displayed in the same listbox as the Key fob number i searched for.
Here is my code for one of the Userforms:
Option Explicit
Sub Locate(Name As String, Data As Range)
Dim rngFind As Range
Dim strFirstFind As String
With Sheet1.UsedRange
Set rngFind = .Find(Name, LookIn:=xlValues, lookat:=xlPart)
If Not rngFind Is Nothing Then
strFirstFind = rngFind.Address
Do
I cannot attach a example of my form since the site seems to have a limit on the size of the upload and my part of the file compressed in zip format is still at 168kb.
View 5 Replies
View Related
Jan 29, 2013
I would like to insert the count of items selected in a listbox in a Userform into a cell. I have been scowering the internet and all of the solutions seem pretty clunky (or don't work).
An alternate way that I could do this is if I have the values selected be entered into a column and then I can use the =count() formula, but I can't figure out how to do that either...
View 1 Replies
View Related
Feb 12, 2009
I have been trying to find an easier way to make sure that the email address that I have been given in a excel workbook are in the proper format before I try to use them. I have tried doing a google search on this subject but have not found the correct solution. I want to enter a function in column L that would use a regular expression for the email format and compare it to the email address in column J. If the results are true place a value of 1 in column K. If false place a value of 0 in column K.
View 2 Replies
View Related
Dec 7, 2007
I cannot find this information anywhere else in this forum...
Does anybody know how to transfer an item from one list box to another using code, on the click of a button.
The list box with the information in is called 'Team_ListBox'The list box i am wanting to transfer to is called 'Starting_Team_ListBox'The button to do this task is called 'AddPlayer_team_Btn'
View 3 Replies
View Related
Jan 28, 2014
I have this on a listbox1 on a userform
10526
10869
10256
5614
2584
[Code] ........
sorts it like this
10256
10526
10869
2584
5614
must be sorted like this
2584
5614
10256
10526
10869
View 3 Replies
View Related
Mar 19, 2008
I have two buttons with macros attached. One button inserts a new wave line and everytime a wave is inserted, the number of that wave follows on. I have another button which inserts a new store line. There can be multiple stores per wave. What I want now is another button which when clicked would bring up a listbox of all the waves so that I could select a wave to delete. Once I deleted a wave I want the waves which are left to re number themselves so that they aren't out of order. This would have to also delete each store which was underneath that particular wave.
View 8 Replies
View Related
Jul 17, 2013
I'm very new to excel. I need a formula to put in a column (I) that returns ONLY a five-digit zip code from the adjacent cell in column J, which is a full address. Nearly every entry is written differently, and many do not contain a zip code. I would like the cell to be blank if the cell in J contains no zip code .
I'm using the formula:
=MID(J5,MATCH(TRUE,ISNUMBER(-MID(SUBSTITUTE(J5,"","#"),ROW(INDIRECT("1:"&LEN(J5)-4)),5)),0),5)
This formula sometimes returns -**** format numbers, considering them to be negative and still five-digit. It also returns #N/A if no zip code is present, and I would like this to be blank. I'm sure I can nest the formula within an IFF, but have not been able to make it work myself.
View 4 Replies
View Related
Oct 3, 2013
I've got an interactive chart on a sheet where users select a chart from a combo box control and a picture link to the chart is displayed. The actual charts are on a hidden sheet. I have to activate the charts first for it to work so I put a button the sheet and recorded a macro where I unhide the hidden sheet, select each chart as I scroll down the screen by clicking on it then hide the sheet again and return to the interactive chart.
My problem is that I'm getting an error when the macro tries to select the first chart which is called "Chart 6":
Run-time error '-2147024809 (80070057)':
The item with the specified name wasn't found
I recorded the macro so I'm not sure why the macro isn't working now.
Code:
Sub ResetCharts()
'
' ResetCharts Macro
' Reset all charts
'
'
Sheets("Budget v Actual Graphs").Select
Sheets("Graph BG").Visible = True
ActiveSheet.ChartObjects("Chart 6").Activate
ActiveChart.ChartArea.Select
ActiveWindow.SmallScroll Down:=15
ActiveSheet.ChartObjects("Chart 35").Activate
[Code] ............
View 5 Replies
View Related
Jul 9, 2014
I have a list of data that includes employee ID number in column A and a certain document that they have on file (onboarding docs such as I-9, W-4, copy of Social Security card, etc.) in column B. If one employee has 10 documents, they are listed with the same ID number 10 times in A1:A10 and the different document names are listed in B1:B10.
I want to clearly see which employee has which document by having the ID numbers going vertically in column A and then an X or check mark of some sort going across the rows.
The set up of what I would like filled in is in the sheet called "status" and the list of documents on file is in the sheet called "docs."check file.xlsx
I tried a combination of an IF and VLOOKUP with a MATCH function but I wasn't getting what I wanted.
View 2 Replies
View Related
Apr 28, 2006
on one sheet we have a summary of the main list, which includes totals of money recieved, totals of all the different sources (ie, where they heard about us from), the totals of the frequencies they pay (ie, how many donate monthly, quarterly...) ... etc. on the next sheet we have the "main" list of donors, their IDs, amounts, frequency, source ...
the totals on the first sheet are updated manually, but i want to change that as there are a great number of errors.
View 8 Replies
View Related
Feb 15, 2014
I am currently using the following code to populate two list boxes (lbUnitList, and lbPOList) on a userform:
How can I get the items in the lbUnitList to show in alphabetical order based on the data in Column 1?
View 4 Replies
View Related
Sep 17, 2009
I have a Listbox with a varying number of items in the list.
90% of the time the user will select all the items in the list.
Is there a way to have all the items preselected?
Then the remaining 10% can unselect.
View 3 Replies
View Related
May 19, 2012
How can I move an item in a Listbox up or down. This is how the listbox is populated:
Code:
Private Sub UserForm_Initialize()
Dim lbtarget As MSForms.ListBox
Dim rngSource As Range
[Code].....
View 9 Replies
View Related
Oct 1, 2013
I have 2 list boxes on a from with data in each list. I've been able to get items to move from listbox1 to listbox2, but I want the item to be deleted from listbox1 once it's moved...and vice versa. Here is the code I'm using. .
Private Sub DeleteButton_Click()
If ListBox2.ListIndex = -1 Then Exit Sub
If Not cbDuplicates Then
[Code]....
View 5 Replies
View Related
Nov 6, 2013
I'm trying to create a module that will take selections from an activeX Listbox on a Sheet called Setup and transfer them to another sheet called Lists. On the Lists sheet, I want to store the selected items in cell L2 and down. So for example, if there were 4 items selected from the Listbox, cells L2:L5 would be populated with those values.
View 1 Replies
View Related
Sep 27, 2009
I can't seem to get my listbox to deselect an item. When the user clicks on a day of the week in the listbox, they are given a yes/no option to print the sheets for the day selected. If they select no and change their mind, they cannot click on the same day of the week without first cancelling the listbox and re-opening it.
Private Sub UserForm_Initialize()
Dim myarray As Variant
myarray = Split("Monday|Tuesday|Wednesday|Thursday|Friday|Saturday|Sunday", "|")
ListBox1.List = myarray
End Sub
Private Sub ListBox1_Click()
Call PrintRoutine(ListBox1.Value)
End Sub....................
View 9 Replies
View Related
Oct 18, 2007
I have a list of items across 4 rows. It is a single select, not a multi-select list.
Row 1 is a Unique ID (1 to nth), Row 2 is a description, Row 3 is a Number Value for one requirement and Row 4 is a number value for another requirement. I have a listbox which captures the range and displays the data in a multi-column format. I want the user to have the ability to move records up or down in the order. I know you can do this for individual items in a colum using list index, but list index does not like to capture rows.
View 3 Replies
View Related
Apr 25, 2014
I've got two listboxes
Listbox1 has
A
B
C
D
E
Listbox2 has
1
2
3
4
5
6
7
8
9
10
If someone clicks "A" in listbox1, I want to select "1" & "4" in listbox2.
If someone clicks "B" in listbox1, I want to select "2" & "3" in listbox2.
etc.
View 3 Replies
View Related
Jun 18, 2014
I can get this to display in my listbox however when I add a new line to the range it won't refresh the list unless I reload the form it is on. I am also looking to see if it is possible to sort a list when it is displayed in this fashion.
[Code] ....
View 1 Replies
View Related
Sep 25, 2013
I have a Listbox1 in which I was able to populate it with unique items (from column B in Programs worksheet) using a collection (that was a good achievement for me!)
Now, I want to populate a the Listbox2 with items (not repeated) from column C, BUT only if the correspondent value on column B is equal to listbox1.value.
[Code] .....
View 4 Replies
View Related
Feb 27, 2014
I have a (MultiSelect) ListBox1 that is populated with Customer Names for the user to select from. I want the user to be able to hit the CommandButton1 adjacent to the ListBox1, and the selected Customers copy into/get added to the ListBox2.
I have the following code, adapted from other code, but it is not working:
[Code] ........
View 2 Replies
View Related
Mar 4, 2014
I have a userform and on this userform i populate a listbox with values.
What i want to know is how do i extract ALL the items in the listbox.......not just the ones that are "selected".
View 3 Replies
View Related
Oct 14, 2009
Why is it when i try adding items to my listbox it comes up with the error Permission Denied. Im using rowsource just to have a heading tho when i want to add items it come up with the error.
Note my headings are in "K2:M3"
Eg.
With Me.ListBox1
.ColumnHeads = True
.RowSource = "K3:M3"
End With
then i try adding an item with
me.listbox1.additem Test
i get the permission denied error.
View 4 Replies
View Related
Dec 14, 2009
I have 10 checkboxes,
When the checkbox is checked, add the cell next to it to t a listbox in another sheet. (in the sample, the result ,must appear in sheet "relatorio", inside the yellow cells)
When the checkbox is unchecked , remove that item from the listbox.
View 10 Replies
View Related
Sep 30, 2013
I have 8 car models in column A of sheet1 and I have a list box control with every car model on sheet 1 as well. I would like code to select all the models from column a in the list box with code.
View 2 Replies
View Related
