I have some data like the following:
2 3 4 8 4 1 3 3 1 8 1 3 5 8 1 2 5 6 1 7 9 3 3
I would like to be able to count the number of times 1 follows 8 for example. For the data above the answer is 2.
I'm trying to sum cells which meet certain values in non-contiguous columns. It's difficult to explain so I've attached a sample wookbook.
View 3 Replies View RelatedI am trying to count the distinct times a value shows up in a column, if another column has a 2 in it.
For example:
Columns
A, B
2,P25
2,P25
3,P5
3,P6
2,P5
The results shoud be: (2) Because I only want to count the P25 one time.
I'm using Excel 2010
I have a column that has mostly empty cells. I want to select only the ones that have data so I can perform an operation on all of them. Empty cells must be excluded from selection. I do not know where the bottom of the data is.
The solution needs to be in VBA where it is part of a larger macro affecting the user's worksheet.
I have a non-contiguous range of cells that contains Values, Formulas, Text or Dates. In some cases a field containing a value could instead contain a formula depending on who is filling out the form and/or what information is known. For example, a cell might contain a value, i.e. Utilities, and I might either know the total ($76,310), or I might need to perform a calculation right in the cell to obtain the total (=54236+9587+12487).
My goal is to be able to copy the information contained in this non-contiguous range to the right some 52 columns (this is a safe temporary storage location) and then be able to copy it back should I need to.
One other problem may be that the source cell might be a merged cell.
Since I cannot determine whether the information is going to be a value or a formula, and I have some text and date formats to copy as well, is there some way to copy this range and keep the data regardless of format?
My Range might look like: (F4, C5, D6:D7, D9, D13:D15, D17:D18, D22:D25, D27:D30)
F4 is a date field, C5 is a merged cell holding text, D6 is the Utilities field described above. The other fields are all formatted as dollars or percentages.
I want to count the number of cells with a “#n/a” in for a cell range which is non-continuous. For example my cell range is: “H5,J5,L5,N5,P5,R5,T5,V5". I’ve tried a few different things but I can’t get the function to work.
View 8 Replies View RelatedI'd like to count non blank cells in 16 separate ranges (each range consists of 6 consecutive cells). The first range in the series is C9:H9. 3 cells are then skipped and the process is repeated with the next range, ie L9:Q9 then skip 3. The last range in the series of 16 is therefore EK9:EP9.
If the value of non blank cells = 2 in any of these 16 ranges then copy the contents of this range to C24:D24 in sheet " Record Form Games 3583". If C24:D24 is not empty copy these values to C25:C26.
If the value of non blank cells = 6 in any of these 16 ranges then copy the contents of this range to C22:H22 in sheet "Record Form Games 3583". If C22 is not empty copy these values to C23:H23.
The ranges colored yellow in the example workbook are the ones that need to be copied to the sheet Record Form Games 3583.
Does anyone know how, to count the same text, but on occasions?
So basically, I mean, if the letter 'S' was in 10 cells, but on 3 different occasions (meaning the cells aren't one after the other), how do I count the fist 'S' of each occasion it appears?
I am trying to figure out how to create a formula or VBA to count how many contiguous 0's there are in a specific row...and then drag this formula down many rows..for example - if a row of data contains 1,3,0,0,0,4,5,0,0,0,0,0,0,0,5,3,1,0 I want the result to be 7, because 7 is the longest streak of contiguous 0's.
View 9 Replies View RelatedOn my spreadsheet I have multiple rows and cells containing alphanumeric text (text is a combination of a person's name and goals scored) i.e. Holland1 appears in row 3 cell P3 then Holland3 appears in row 6 cell O6.
What I would like to be able to do is have a forumla that looks at every row and cell in my range and sum the numbers of the alphnumeric text if the cell contains a certain name i.e Holland.
I had tried to use the array formula =1*MID(A1,MATCH(TRUE,ISNUMBER(1*MID(A1,ROW($1:$26),1)),0),COUNT(1*MID(A1,ROW($1:$26),1))) which I found on the internet but this only works for one cell and doesn't allow for a set criteria to be met.
I have a list of groundwater level values in 800 different wells that were measured in April and October of each year from 1982-present. The problem is that they are listed in order:
Date ELV
04/16/1981120.37
09/17/1981119.25
04/10/1982120.52
10/10/1982118.1
04/10/1983124.36
10/10/1983120.43
etc....
I want a formula that will average all the April values and another one that will average all the October values.
I'm trying to develop a new daily timesheet for my production workers, where non-production items are recorded in 15 minute intervals. The user would put in "Clock in" by the corresponding time, and the same for "Clock out" at the end of the day. Any non-production items will be type in next to their appropriate time. Since clock in and clock out times will vary, I need to set up a formula that searches the array of cells for the day, finds the "Clock in" and "Clock out" values, and counts any blank cells in between them. Basically the blank cells will equal production time, and the result of the Count function will be multiplied by 0.25 to get the hours.
I am having a very difficult time finding a way to set the "Clock in" and "Clock out" cells as the range for the Count function, because it won't always be the same cells. What would be the best way to automatically have excel find the cells containing these values and set them as the range criteria for a Count function?
The formula at the bottom was one of my initial attempts, but it didn't work. I took out the '=' for the screenshot, so that wasn't the problem.
I have the following data in 1 of the tabs.
[TABLE]
ClassSequenceAB
10SE132422
20SE23212
20SE321
20SE23425
10SE332455
15SE132412
10SE234
[/TABLE]
I want a unique count of sequences in a different for that class only if that particular row in 'A' or 'B' is populated. The result set should be as follows:
[TABLE]
ClassAB
1032
1511
2012
[/TABLE]
Can this be achieved through a formula?
I have a list of values and value ranges (11 total) that I'm trying to match to values in Column A, but my formula has too many nested "IF" functions to work. My formula is fairly simple, so I'm hoping it will do a better job of describing my problem than I.
=IF(4>A2>0,"1",if(37>A2>24,"2",if(A2=39,"3",if(45>A2>41,"4",if(A2=48,"5",if(A2=62,"6",if(73>A2>64,"7 ",if(A2=75,"8",if(A2=80,"9",if(107>A2>102,"10",if(A2=141,"11",""))))))))))))
There should be a positive result if the cell value matches any one of the following:
1-3
25-36
39
42-44
48
62
65-72
75
80
103-106
141
In the formula I have numbered the results from 1 to 11, strictly for illustrative purposes. A return of X, 1, YES, etc.
I have Workbooks("A") and Workbooks("B") open.
Workbooks("A") contains Sheets("Sheet1"). Range("mySource").
Workbooks("B") contains Sheets("Sheet1").Range("myTarget").
Both ranges have been created by joining multiple ranges, in this way:
Union(Range("C1:C13"), Range("K1:K2"), Range("K5:K9"), Range("K14"), Range("Q6"), _
Range("I18"), Range("B20:P20"), Range("B24"), Range("C26:E26"), Range("C29"), _
Range("B34:B40"), Range("B44:Q50")).Name = "mySource" 'or "myTarget"
So: both ranges contain the same number of cells with the same addresses, and they have been added in the same order. However, if now I try to pass all values from mySource to myTarget, in this way:
Workbooks("B").Sheets("Sheet1").Range("myTarget").Value = _
Workbooks("A").Sheets("Sheet1").Range("mySource").Value
the result is a complete mess. Only the first "subrange" of mySource ("C1:C13") is passed to myTarget, and pasted in each of its "subranges", sometimes by rows and sometimes by columns...
I had some code working fine in office 2003:
Sub Replacing()
Dim rRange As Range
Dim lArea As Long
Dim Co As Byte
Dim NaCo As Byte
NaCo = 99
Set rRange = Range("B:C,E:F,H:I")
With rRange
For lArea = 1 To .Areas.Count
With .Areas(lArea)
Co = Choose(lArea, 1, 2, 3)
.Replace What:=Co, Replacement:=NaCo, LookAt:=xlWhole, _
SearchOrder:=xlByRows, MatchCase:=False, SearchFormat:=False, _
ReplaceFormat:=False
End With
Next lArea
End With
End Sub
the problem is that it's not working for Office 2000
This time I want to replace:
number "99" in range("B:C") to number "1";
number "99" in range("E:F") to number "2";
number "99" in range("H:I") to number "3";
Sub Replacing()
Dim rRange As Range
Dim lArea As Long
Dim Co As Byte
Dim NaCo As Byte
NaCo = 99
Set rRange = Range("B:C,E:F,H:I")
With rRange
For lArea = 1 To .Areas.Count
With .Areas(lArea)
Co = Choose(lArea, 1, 2, 3)
.Replace What:=Co, Replacement:=NaCo, LookAt:=xlWhole, _
SearchOrder:=xlByRows, MatchCase:=False, SearchFormat:=False, _
ReplaceFormat:=False
End With
Next lArea
End With
End Sub
I would like to be able to count the amount of entries in column C and depending on the amount group them in either groups of 3 or 4, all names would be unique...so if there are 14 names in the list they would need to be grouped in to two groups of 4 and two groups of 3, if there were 19 then 4 groups of 4 and 1 group of 3 etc to a maximum 50 people, the results could appearon a seperate worksheet say pasted on to the worksheet starting with the groups of 3 (so paste a group of 3 then skip 3 rows then paste groups of 4 skip 2 rows, the row skipping is to allow seperation and manual entry of extra data). There will never be groups of 5 or more and never less than 3
View 8 Replies View RelatedI have tried:
Code:
With Sheet1
x = .[b7:i16,b19:i23,b27:i32].Value
But that only loads the first range (.[b7:i16]).
This does work:
Code:
.[b7:i16,b19:i23,b27:i32].Copy .[z1]: x = .[z1:ag21]: .[z1:ag21].Clear
I would rather avoid having to copy/paste, load the array, then clear. Is there a way to load the array directly?
I am trying to copy paste info from one sheet to another, however, I would like to select where the information is to be pasted, not have it go to a predetermined cell or column.
Here is the code I have so far that works fine, but it requires a macro for each column I would like to paste to.....
I use to have a macro that could copy formulas from non contiguous ranges and paste the values in the same cells. So for example, I could select a non contiguous range like B5:B10, E10:F12, and G1:G10. The macro would then copy and paste the values in those 3 ranges, so those 3 ranges would be values instead of formulas.
I think it worked by storing each range and then looping through each range to copy and paste special values.
I have number data in columns F through AK. In column AL I want a formula that will look in columns F through AK from the left to right. Once it identifies a positive value I want the formula to identify if after that positive number there are any occurances where there are 6 0's in a row (anywhere up until column AK). The formula can return a True or False. I want to drag the formula down across many rows of data. If the entire row contains 0's, I do not want it identified as a TRUE
View 9 Replies View RelatedI have tried a range of "sumproduct" and "count if" and I am still not having any luck.
What I would like excel to do is to count what surgery/hospital (B)is referring for what product (F)
help.xlsx
I have two columns, Column A which is a list of numbers and Column B which is a list of different sports. What i want is a formula that adds all the values in column A where the adjacent cell in column B equals a given sport (i will use Golf in this example).
View 2 Replies View RelatedI am trying to count different values in a range of cells. I tried a countif function and it worked kind of. Here's what i have.
Column B2 has values j3265,j4463,k5532,y2235,k2334....
I want to count all the J's, K's, and Y's separately.... >=4000 and how many
How do I count values in filtered cells?
After I filter for values in Columns(C), I want to count values in Columns(D). When I filter data, I noticed I can manually select the filtered cell range (i.e. Columns(D)) and at the bottom in the Status Bar it will give the correct count. If I cursor over that status bar count it will display "Number of selected cells that contain data." However, I cannot seem to figure out how to get vba to select just the filtered cells selected in that range and count them only and correctly... it instead counts all the values to the last cell in the filtered range.
For example
1) let's say I have a Range("D1:D120') and there are 20 cells containing data in that range.
2) I filter Columns(C) resulting in 10 rows and the rows are 2, 3, 20, 22, 27, 30, 37, 41, 56, 60. Of those 10 rows, there are only 2 cells containing data (let's say cell D20 and cell D37).
3) Now in reality, cells in Range("D2:D60") actually contain 10 cells with values, but since we filtered on columns(C) values... Columns(D) only shows 2 values.
...... here is my problem:
4) If I manually select the filtered range, the status bar "Count" value will correctly sum as "2." But if I code VBA or even "Record a macro code" (obviously incorreclty on my part), it will return a value of 10 for the range of D2:D60 and not on the visible filtered value which is "2."
I have a rather large database that I'm trying to automate colours in, based on data that is inserted into Column 'D'. I've used the following code (with some success), but it colours columns that I don't want to colour:
VB:
Sub KeyCellsChanged()
Dim Cell As Object
For Each Cell In Range("D1:D5000")
[Code].....
That works fine - but the problem I have is that I only want to colour columns A:N, Q, T, V, AB:AE, etc. (random columns and not always together). I have already tried to replace parts (as follows), but get all sorts of errors (in particular Run-time error 1004):
VB:
If Cell = "Rabbit" Then
Cell.Range("A:N,Q, T, V, AB:AE").Interior.ColorIndex = 42
Is there someway that a line of code can determin which cells to colour in the row, or alternatively code that will colour the columns a specific colour and make them stay that colour when the first code above is used?
I can find the min value excluding zero in a range of contiguous cells, but how can I do it if the cells are A1, A3, A25, A67, etc?
View 9 Replies View RelatedCopying and pasting into non-contiguous cells.
I want to be able to filter my data set, so for example I can filter column A for the value Berkshire, I then want to be able to select all the Berkshire's in Column A (not a problem, simply select them and copy), but I then need to be able to paste them into column B, so they appear in exactly the same rows as they do in Column A, but this doesn't work, it pastes them into hidden cells as well.
I've tried the Alt + ; (Visible Cells Only) option, followed by copy and paste and this makes no difference.
I have over 20,000 rows of data to filter, then copy the relevant cells and move to the same row in another column and currently I'm having to move the cells one by one which is ludicrous.
How would I go about sorting a selection of non-contiguous cells?
View 5 Replies View Related