I am trying to count different values in a range of cells. I tried a countif function and it worked kind of. Here's what i have.
Column B2 has values j3265,j4463,k5532,y2235,k2334....
I want to count all the J's, K's, and Y's separately.... >=4000 and how many
I'm trying to develop a new daily timesheet for my production workers, where non-production items are recorded in 15 minute intervals. The user would put in "Clock in" by the corresponding time, and the same for "Clock out" at the end of the day. Any non-production items will be type in next to their appropriate time. Since clock in and clock out times will vary, I need to set up a formula that searches the array of cells for the day, finds the "Clock in" and "Clock out" values, and counts any blank cells in between them. Basically the blank cells will equal production time, and the result of the Count function will be multiplied by 0.25 to get the hours.
I am having a very difficult time finding a way to set the "Clock in" and "Clock out" cells as the range for the Count function, because it won't always be the same cells. What would be the best way to automatically have excel find the cells containing these values and set them as the range criteria for a Count function?
The formula at the bottom was one of my initial attempts, but it didn't work. I took out the '=' for the screenshot, so that wasn't the problem.
How I can create a simple formula to count unique values/text within a range of cells that contain duplicates, blanks and errors?
For e.g., in Column A (row 1 - 10):
Proj-001
Proj-001
Proj-002
Proj-004
#N/A
#N/A
Proj-007
Proj-002
I have the following data in 1 of the tabs.
[TABLE]
ClassSequenceAB
10SE132422
20SE23212
20SE321
20SE23425
10SE332455
15SE132412
10SE234
[/TABLE]
I want a unique count of sequences in a different for that class only if that particular row in 'A' or 'B' is populated. The result set should be as follows:
[TABLE]
ClassAB
1032
1511
2012
[/TABLE]
Can this be achieved through a formula?
How do I count the number of cells that have a value greater than 0 in a range of cells?
View 2 Replies View RelatedHow can I use COUNTIF to count the values in a range which are greater than 0?
I put =COUNTIF(B2:B100000)>0 but that didn't work?
(I'm using XL 2007 hence the range greater than 65000 rows. But I don't
think COUNTIFs syntax has been changed in 2007 so I assume I'm having a brain
fart.)
I'm trying to figure out how to count by two criteria, only one of the criteria has a value among multiple values in a cell and the other is a range. I tried to use sum but it doesn't count the value and count doesn't recognize the range. I attached the file so you can see what we're trying to do.
View 4 Replies View RelatedI'm trying to count the number of times a payment is made within a certain set of dates. I believe that I should be using a countifs function, but I'm not exactly sure how to program it. I have a number of months, say the last 12. And in each month a payment is made or it isn't made.
View 6 Replies View RelatedHow do I count values in filtered cells?
After I filter for values in Columns(C), I want to count values in Columns(D). When I filter data, I noticed I can manually select the filtered cell range (i.e. Columns(D)) and at the bottom in the Status Bar it will give the correct count. If I cursor over that status bar count it will display "Number of selected cells that contain data." However, I cannot seem to figure out how to get vba to select just the filtered cells selected in that range and count them only and correctly... it instead counts all the values to the last cell in the filtered range.
For example
1) let's say I have a Range("D1:D120') and there are 20 cells containing data in that range.
2) I filter Columns(C) resulting in 10 rows and the rows are 2, 3, 20, 22, 27, 30, 37, 41, 56, 60. Of those 10 rows, there are only 2 cells containing data (let's say cell D20 and cell D37).
3) Now in reality, cells in Range("D2:D60") actually contain 10 cells with values, but since we filtered on columns(C) values... Columns(D) only shows 2 values.
...... here is my problem:
4) If I manually select the filtered range, the status bar "Count" value will correctly sum as "2." But if I code VBA or even "Record a macro code" (obviously incorreclty on my part), it will return a value of 10 for the range of D2:D60 and not on the visible filtered value which is "2."
I need a way to find a value in a column which has one or more corresponding values in an adjacent column. Then take all of the corresponding values found and count all occurrences of the found values in another column. But I only want to count the entries if an adjacent column is not blank.
Not the easiest thing to describe. Starting to wonder if I need to think in reverse. I hope the attached example makes more sense.
Book1.xlsx
I'm looking for a way to count the cells in a specified range if the cell contains a timevalue (such as: 0:05 or 1:15). When a cell in the same range contains a normal value (such as: 1 or 20) it should not be counted.
What formula should i use for this?
I was experimenting with:
=CountIF(N4:N50,">TIMEVALUE(0:01)")
and
=CountIF(N4:N50,">TIME(0,0,1)")
But both don't seem to work.
In an employee attendance file I am trying to count the number of times an employee has taken 3 or more days of leave together (continuously) in a month. My attendance file looks something like this
sat
sun
mon
tue
wed
thus
fri
[Code] ..........
In the example above E001 has taken 3 continuous days leave twice so formula should return 2, for E002 & E003 the answer would be 1 each.
The solution can be either in VBA or conditional formatting, if possible.I have product names on column A and weeks as from column B where I have the quantity sold. So, every week I'll have an additional column.
A B C D E ...
Product Week1 Week2 Week3 Week4...
What I need:
If the cell is filled, highlight it in green.
If the gap (empty cells) between weeks is =1, highlight it in yellow
If the gap (empty cells) between weeks is >1 but <2, highlight it in orange
If the gap (empty cells) between weeks is >2, highlight it in red
The attached example better illustrates the needs : Example.xlsx
I have a column with (potentially) multiple values in, heres an example:
Marketing Specialism
Commercial, Multi-channel, Loyalty/Retention
Analytics, Partner
Analytics
Commercial, Analytics, Segment
[code]....
What I need to be able to do is count (and then chart) the number of each value, irrelevant of whether it appears with another value in a cell. e.g.
Analytics, Parter - Would count 1 Analytics and 1 Partner
Analytics - Would count 1 Analytics
I know there is a formula where I can specify the value to count, but as the column has so many different values I would have to write a formula with each separate value, this would take a long time.
I'm trying to create a quick macro that tells me the number of active rows in a spreadsheet with just one column, and then copies the value of that variable and places it into an excel spreadsheet. For Counting the rows in Column A, I have:
Sub countRows()
Dim RowCount As Integer
RowCount = Range("A1", Range("A1").End(xlDown)).Rows.Count
End Sub
How could I get the value of RowCount to be entered into the excel spreadsheet, say, in cell D5?
I have some data like the following:
2 3 4 8 4 1 3 3 1 8 1 3 5 8 1 2 5 6 1 7 9 3 3
I would like to be able to count the number of times 1 follows 8 for example. For the data above the answer is 2.
I have 10 columns and 18 rows. Every 2nd row might contain a number. I need to sum those numbers, however, sometimes group of cells in a row can be merged and i value of a cell is then 0.
example:
A1 to D1 merged; value 6
A3 to B3 merged; value 3
B5 to E5 merged; value 2
=sum(A1,A3, A5) would return 9 - correct
=sum(B1,B3, B5) would return 2 - should be 11?
=sum(C1, C3, C5) would return 0 - should be 8?
=sum(D1,D3, D5) would return 0 - should be 8?
=sum(E1, E3, E5) would return 0 - should be 2?
In what would be Cell E2 I want to post the Total posted set Assuming that the Order Numbers and the OP Numbers are the Same, but only if there is a value in the allowed set, So I'd expect E2 in the case below to read 1.83,
Order No OP Posted Set Allowed Set
30761157 00100.731.500
3076115700100.500.000
3076115700100.600.000
3076461000100.000.000
3076461000101.050.500
3076524400100.000.000
3076524400100.550.500
3076639600100.000.000
3076639600101.180.500
3076810900100.000.000
3076862900100.000.000
3076862900100.000.000
3076862900100.000.000
see attached workbook.
I'm attempting to count the empty cells in column C which correspond with the project reference shown in column A. I only want to perform this calculation where the project numbers change (see desired results in column D).
Am struggling with finding a way to define the different range of rows for each project ref within the formula. The full sheet has over 6000 rows and 1500 project refs.
I receive spreadsheets which tell me where samples are located in 96 well plates. The plates' rows are lettered A-H, and the columns are numbered 1-12. So, for example, the first well is labeled A1, the 12th is A12, the 13th is B1, and the 96th is labeled H12.
When I receive the spreadsheets, there are cells that tell me which wells are occupied. For example a cell will contain "A2 - B7" or "D3-F12" (sometimes with the spaces before and after the "-", and sometimes not." I need a program that will tell me that "A2-B7" (or "A2 - B7") means there are 18 wells occupied.
I've tried a few things, but a lot of problems arise when I try to do anything with names like "A1" because excel already defines "A1" as cell A1. Do you guys have any ideas? Am I being clear?
I'm trying to get a count of cells that have a range of data for instance I
want a count of cells that have data between 10 - 20.
I have a gradebook that contains 3 assignments. For each assignment, a student could choose between one of three options (A, B, or C). Some students completed multiple option.
1A
1B
1C
2A
2B
2C
John
6
3
2
4
6
Mary
2
2
3
Sue
4
I need to count how many assignments were done, not how many options they completed. So in the example above:
John complete 2 assignments.
Mary completed 2 assignments.
Sue completed 1 assignment.
What is the correct formula that will look at a range of cells, and if a student completed at least one option, return a count of 1?
i'm trying to count a range of cells in a column. it seems basic but i can't quite figure out the code. i just want to count the nonblank cells, not the data in them. could i use something like =if a1 = 1 and a10 = 10, counta a1:a10 to count all the cells from a1 to a10?
View 9 Replies View RelatedThis formula counts how many dates in the range match the month in cell (Q3). How do I get this formula to to not count empty cells. I keep getting $VALUE! as my answer when I include all the cells in the range.
This is the formula:
=SUMPRODUCT(--(P20:P976-DAY(P20:P976)+1=DATE(YEAR(Q3),MONTH(Q3),1)))
This is the formula in the cells of the range that is being used above:
=IF(D26="","",IF(F26"",F26,IF(I26"",I26,IF($Q$3"",$Q$3))))
I needed this formula to leave the cell blank if all the data cells were blank that's why I have =IF(D26="","", at the begining.
I seem to be 'search challenged' today - I'm sure this is easy. How does one count the number of non-blank cells in a range using VBA?
View 7 Replies View RelatedI am trying to total the number of cells in a column that are 0 or greater but less than 365. I use countif for for a specific digit but cannot compute a conditional range using it. I need to count the number of positive digits btwn 0 and 365. The column is a computation of the difference btwn today and past and future dates. A plus digit means we missed sevice and better be ready for an angry customer.
View 3 Replies View RelatedI am trying to replace a range of cells with certain values but I can not figure it out. I'm almost there I think but don't know how to get the varying values I'm looking for. So I have a column (AJ in this instance) that has a bunch of "xx" values at different spots within the column. I want to replace those xx values with numbers 01 through 36. What I have below gets me just about there but it replaces every xx value with 01. How do I get it to go 01 on the first one, 02 on the second one, etc?
/code
Dim cell As Range
For Each cell In Range("AJ1", Cells(Rows.Count, "AJ").End(xlUp))
If cell.Value = "xx" Then _
cell.Value = "01"
Next cell
/code
I have a test log with PASS/FAIL. These results are logged in Excel under the column heading PASS/FAIL.
How do I count the number of PASS or FAIL using VBA macro?
So far I have tried:
[Code].....
This one did not work either:
[Code] .......
the error is at the name = Range("PASS/FAIL").Select line.
My thought process: once I had selected a range, I can now freely "look" at each string in a cell in that range. Not correct I guess.
All this is currently done in the active sheet.
I am having a problem putting a range select statement in my macro. Here is what I'm trying to do. I want to select E1, then count down 10 cells below and copy. My sheet is filtered, so those rows are not continues. When I do the record a macro it highlights the rows and it looks like this (e10:e506, but it's only 10 items). I only want it to count down 10 cells and copy. Is there a statement for this.
View 3 Replies View Relatedhow to make a formula using a column label to count all cells that fall in a given date range. Example, in the attached sheet I would like to make a formula using the column heading "Dismantled" to count all cells that contain dates ranging from 10/13/08 through 10/19/08 inclusively.
View 5 Replies View Related