Pick Out Highest Maximum Age For Each Individual And Apply To Previous Height Measurements
Feb 4, 2014
This is an example of my data, lets say they are heights of trees. The number is the tree individual, t2 is the age of the tree, height_t2 is the height of the tree at the age t2, and t_ current is the age of the tree individual at present/current. I would like a formula for the t_current column that will pick out the current age of the tree individual and apply it to the age years previous. i.e the t_current age should be repeated for each height measurement for that tree individual, i have filled it in as an example.
Numbert2(age)Height_t2t_current
11236
12486
13706
14836
15926
161006
21286
[code]....
View 3 Replies
ADVERTISEMENT
May 15, 2009
I have two columns of data. The first column is the 'type' and the second column is the 'value'. I need to find the maximum 'value' for each individual 'type'
The 'types' are not necessarily next to each other and the data cannot be sorted to do so.
Example:
type value
A 15
B 6
A 21
C 7
B 13
I need to be able to say the MAX for 'A' is 21, the MAX for 'B' is 13 and the MAX for 'C' is 7.
View 2 Replies
View Related
Apr 26, 2014
Here is my issue...
Column B has a lot of data within different rows
Column A only has Some empty rows, and some rows with content.
The issue is I am having is I am trying to sort the the rows of column A in Alphabetical order, but Iwant to lock the height or merge the rows so that when I sort them I do not end up with empty spaces or them be un-aligned with Column B. This spreadsheet is too long to go and re-format every cell but here is an example:
A ----- B
John
(blank) ----- this column's
(blank) ----- rows are
(blank) ----- merged
David
(blank) ----- this column's
(blank) ----- rows are
(blank) ----- merged
The cells in B are already at the proper height to be alligned with the names.... but if I try to put the names in alphabetical order then nothing will be alligned.
View 1 Replies
View Related
Aug 15, 2014
Refer to enclosed excel file, I have drew a chart base on the data in side. However, for the last column which is "SG Productivity(KUSD)", The column very small even cannot be seen, is there any way can enlarge columns in this field without changing other column? T
View 1 Replies
View Related
Apr 16, 2013
What's the easiest way of filtering a list of products to only show the highest revision for each product, preferably without using macros or VBA?
E.g. I only want to show the asterisked rows in the table below:
Product Rev
AAA 1
AAA 2
AAA 3*
BBB 5*
CCC 3
CCC 6*
DDD 1
DDD 4
DDD 7*
Potentially, other (random) data could also exist in the same row.
The example above is sorted alphanumerically but a solution for an unsorted table would be even more useful.
View 7 Replies
View Related
Mar 10, 2009
s/s is 325501 rows deep. Column C contains names. Column J contains scores. I need column N to give me the highest score a name has previously achieved. (please see small attachment for illustration). If i can get a formula then I can fill this down.
View 4 Replies
View Related
Aug 21, 2006
I have a sheet of about 15000 rows made up of about 1300 groups( events) and 40 columns, a miniature of which is attached.
In column1 I have the event identifier,column 2 contains a score or rating for each contestant in each event.,in column 3 there is a code for each competitor,either orange or pink.There will be at least 1 orange and 1 pink in each event.
column 4 is the one I want to create by formula,the lowest pink in each event
divided by the highest orange. I have titled this column the spread. I have filled column 4 manually to illustrate what I mean.
View 6 Replies
View Related
Nov 1, 2008
I have a worksheet that is made up of the following:
Column A : Date
Column B : Time
Column C : Price
I want to use these two functions, to pull the highest price:
View 7 Replies
View Related
Oct 26, 2006
For the small database in my example workbook, I would like to apply credits earned at a later date to the oldest charges and create a "To Date" balance. After creating the "To Date" balance, I would like to select the smallest "To Date" balance as a way to identify the first charge that has no payment. Please see the attached for more clarity and additional information. The last column shows the desired results.
View 9 Replies
View Related
Feb 24, 2009
Finding the Column with the MAX Height in comparison with other Columns of UNEVEN Height
I need two things :
1. I have several columns starting from Column B till Column F, each column having values starting from the third ROW.
Ex:-
Lets say Column B contains two values in B3 and B4, Col C three values in C3 C4 and C5, Col D four values D3,D4,D5 and D6, Col E two values in E3 and E4, Column F five values F3,F4,F5,F6 and F7.
So, the answer is F3:F7.
2.I am using 10^{4,3,2,1,0} in a particular portion of a formula, Now the number of elements in the array or in the Curly Braces depends on the number of Columns filled from Column B as explained in the Point 1.
Now, since I have five columns under consideration I have this order as mentioned here {4,3,2,1,0} , I would like to know whether I could make this dynamic, as in if there were only four columns then this would be {3,2,1,0} and if more this array could self-fill and expand..
If that's possible, then how do we use it in the formula, Is it by the virtue of the INDIRECT function?
View 14 Replies
View Related
Jan 6, 2013
I have series of data values like below. I have to find Maximum, Minimum values for each of these values.
9430
9822
10070
[Code].....
View 2 Replies
View Related
Mar 9, 2013
I have an excel file having part code,name,vendor and Qty ( Quantity ).
My problem is that I want to apply an excel formula to pick up that vendor code who have highest Qty of a part code.The condition is that S.No.should not be disturbed.This file is so large,but here I have taken an example,
View 2 Replies
View Related
Apr 7, 2014
My current project involves sorting a spreadsheet, selecting specific qualifying data from the sheet, storing it into a variable, the pasting the individual values from the list into individual cells on a different sheet within the same workbook. Here is the code I have so far...
Code:
Sub Test()
'' freeze screen updating to remain on main worksheet
Application.ScreenUpdating = False
'' move to Avaliable worksheet
[Code] ..
When this code runs the first item in the list pastes into Sheet10 A1, but no other values from the list are placed into Sheet10. Previous to this I had been using a variation of this code to push the list into a combobox list within a userform. In that case instead of
Code:
ThisWorkbook.Worksheets("Sheet10").Range("A1") = x
I had
Code:
Combobox1.list = x
And this worked perfectly; creating a list within the combobox (in fact I can use this modification to interrogate my code to determine if the list is being properly generated, and it is).
View 2 Replies
View Related
Feb 18, 2013
I need to convert the following into radians:
65 feet/1 second * 12 inches/1 foot * 1 Radian/8 inches
I know the answer which should be 97.5 radians. It's just getting the right formula in Excel.
View 3 Replies
View Related
Mar 4, 2013
I have a .csv file with measurements. I can open it in excel, and have succeeded in make 3 separate columns from it and save as an .xlsx file. But the problem is I still can't do calculations with the data. it are all values from a form like "-3.44e-07" but excel recognizes this as text. I don't have a green triangle in the corner and multiplying by 1 doesn't work.
Apparently i can use them as numeric values in MATLAB, but I don't know how to do this in excel. And I have 9 files like this, each containing 3 columns and 600 rows, so changing all the cells one by one is no option.
I use the dutch language version of excel so I hope I translate the specific names of things in excel correctly.
View 9 Replies
View Related
Feb 2, 2009
I need to convert measurements with (',") symbols attahced to them. See attached cells. Excel does not like the symbols and I cannot figure out a way to have it convert the values into tenths of a foot. For example, from the list below I need to convert 7'2" to 7.17. I have years of data. How do I do this?
7'2"7'1"7'0"6'11"6'10"6'9"
View 9 Replies
View Related
Sep 24, 2008
I'm an excel novice. I am trying to create a chart that assigns a range of foot measurements to each shoe size, but the data I am working with has only one measurement for each shoe size. Example: The data I have says:
size 7 = 250mm
size 7.5 = 255 mm
size 8 = 260 mm
So I want to create a formula, so the chart reads something like:
size 7 = 247.5mm - 252.5mm
size 7.5 = 252.5mm - 257.5mm
size 8 = 257.5mm - 262.5mm
I'm using ms excel 2003 on windows vista
View 2 Replies
View Related
May 30, 2008
I would like to use Excel as a measurement device. I have an inexpensive digital microscope that will store sequentially numbered pictures at the click of a button. I am then going to import the most recent picture into Excel and place a grid of transparent rectangles over the picture to serve as my ruler. Would it be possible to continuous update the Excel workbook with the output from the digital microscope?
View 7 Replies
View Related
Oct 23, 2008
I was hoping that my formula would give me the count number based on the Maximum time (latest time) and the Name field...My result is a 0 instead of 62 (the correct answer).
=SUM((Download!$H$2:$H$10=A4)*(Download!$D$2:$D$10=MAX(IF(Download!$H$2:$H$10=$A4,Download!$D$2:$D$1 0)))*Download!$I$2:$I$10)
Would a Index/Match/MAX function be more efficient?
View 4 Replies
View Related
Dec 10, 2012
see attached file. Need to find latest non blank value - in attached file it is highlighted in yellow. From there, want to summarise 26 weeks back so, in the attached file:
Row 2 would be finding 750 and summarised back 26 weeks from 30 sep 2012
Row 3 would be finding 2250 and summarised back 26 weeks from 2 dec 2012
Row 4 would be finding 5000 and summarised back 26 weeks from 4 nov 2012
View 7 Replies
View Related
Oct 9, 2008
Look in Column E and find the MAX value. Once you find the MAX value, (let's say E27) display the date that's in C27. I bet this is really easy but I've been screwing around with it for over a half hour and can't get the correct result.
View 2 Replies
View Related
Nov 27, 2013
I'm attempting to put together a script which in simple terms finds the 'Highest and Second' highest activity and associated FTE for a given sub group.
To be more specific:
On the "Slide 1" sheet look at the values in column J starting at row 7 until blank;For each value, then search the "All Monthly Direct Activities" sheet in column C for the same value, excluding the 'Subtotal' rows;Where a match is found, compare all the values in column E for that sub group;And Find the highest and second highest figure;
Once these are found copy this figure and associated value in column B and paste onto the "slide 1" sheet.
I'm not particularly well versed in writing VB, but I've been working with the code to see if I can get this work, which I have been unable to do.
I have attached a file which may perhaps provide a greater detail than my description of the problem containing the 'Source' and 'Destination' sheets.
View 9 Replies
View Related
Jan 15, 2008
If I use =MAX(A1:G1) I get the highest value. Is it possible to show the next highest rather than the highest and if so how?
View 9 Replies
View Related
Dec 18, 2011
I am needing so I did it as a picture. (Please assume "Day 1" is A1)
View 7 Replies
View Related
Apr 25, 2007
I am using excel 2003. I have copied and pasted text from microsoft word onto excel.
The text is already split up into rows and columns in word. When i past it into excel and select all thousand or so rows and then double click the row to engage the automatic row height it doesnt work. It cuts off the last line or last two lines of the text in most but not all of the cells. What can I do other than one by one change the row height?
View 9 Replies
View Related
Mar 16, 2014
Situation. In a Sheet1:
- each cell in row 1 represents the width of its column (i.e., if D1=3, the width of column D should equal 3),
- each cell in column A represents the height of its row (i.e., if A4=5, the height of row 4 should equal 5).
Question1. I need the widths and heights to adjust automatically every time, when values of corresponding cells change. How could that be accomplished?
Question2. I read that the width/height are measured by number of characters (i.e., if width=3, it means that 3 '0' characters of normal format can fit in that space). Will the values with fractions work correctly (i.e. will width=3.5 correspond to 3.5 '0' characters)?
If no, how to adjust for that?
Note. In the current situation, additional rows and colums will have to be inserted, so the solution should work with new rows and columns as well.
View 13 Replies
View Related
Mar 3, 2008
I have a spreadsheet in which double clicking on any of the cells in the range A4:C17 changes the contents of cells F4:I33. The following code tells me which is the active cell and then pulls the values for F4:I33 from a lookup table based in this.
Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, Cancel As Boolean)
Range("B100") = ActiveCell.Address()
Cancel = True
End Sub
code to stick in this (probably after the third line) that autosizes rows 4 to 33. There are no merged cells involved.
View 3 Replies
View Related
Feb 6, 2010
I have a vlookup into a row of cells. Sometimes the new text is so long it has to word wrap. How can I get the ros to expand with out me manually doing each row, and then go back to one line with the data changes.
View 9 Replies
View Related
Aug 18, 2006
inability to set a default row height and still allow the occasional row that requires more space (i.e., one of it's cells has multiple lines of wrapped text) to AutoFit if necessary.
Say you have the data shown in NormalSettings.png in an Excel file (see attachments) and you want to have a little more room between the shorter rows, but not have them all set as big as the expanded rows. One way to do this in bulk is to select the entire spreadsheet and set a fixed row height, but this chops off any cells that require more space than your default height (see FixedRowHeight20.png). The only way to fix this is to manually scan through your sheet and individually select all rows with cells that need more room than your preferred row height and AutoFit them (good luck if your spreadsheet is any size...) . If you try selecting the entire sheet and choose Format-Row-Autofit, you're back to the crowded display shown in 'NormalSettings.png'.
My workaround to this annoying problem is this: choose a column that you're not using (I just select the very last column in the sheet by holding down CTRL and pressing the right arrow until the screen stops moving) and highlight the entire column by selecting the column header. Then increase the font size for that column...voila, even your blank rows will now AutoFit to the new font size rather than the font size you are using for your data...effectively increasing your default row height without sacrificing AutoFit capabilities. I find that using 16 as a dummy font size makes my data (which is font size 10, Arial) look nicely spaced out, but experiment and try stuff until you find what you like!
View 1 Replies
View Related
Dec 10, 2012
How Auto Resize (height) cell to fit text? (macros, formulas, setting)? One can make the height of the cell is reset according to the amount of text?
ej..jpg
View 4 Replies
View Related
