I am trying to use the following macro to autosave a document to a pdf file. It works except it always saves it as the same name. Is there a way I can make it save it and when it saves it, title it as the contents in cell A5?
Code:
ActiveSheet.ExportAsFixedFormat Type:=xlTypePDF, Filename:= _
"C:UsersTRFoundationDesktop529431.pdf", Quality:=xlQualityStandard, _
IncludeDocProperties:=True, IgnorePrintAreas:=False, OpenAfterPublish:= _
True
I have this code, and it's not working: ...
View 9 Replies View RelatedIs there a way that I can have an excel document "autosave"?
Specificaly I would like: If a value in a specific cell's value is changed I would like the document to automatically save the document as the name of the value that is typed into that cell when the user closes the document.
I'm not sure if this is possible, but it would be great if there was some way to do this.
I have macro enabled workbooks that the contract number increases by one everytime they are opened. Is there a way to make it auto save though when its opened. Right now I have to click save as soon as I open it. If I do not do this when I open it, when I open it again the contract number will stay the same as it was, because I save it at the end after I put all customer info in.
View 8 Replies View RelatedI'm trying to write a macro in excel that will save the document every couple of minutes. After searching the forums here for a bit I found something that might work:
Sub test()
newHour = Hour(Now())
newMinute = Minute(Now())
newSecond = Second(Now()) + 30
waittime = TimeSerial(newHour, newMinute, newSecond)
Do
ActiveWorkbook.Save
Loop
End Sub
The only thing about this is that it runs constantly and won't stop saving. Is there a way to do this where it will only save every 5 minutes or so?
I am using the following code to automatically save the workbook when excel is being closed.
Private Sub Workbook_BeforeClose(Cancel As Boolean)
ActiveWorkbook.Close SaveChanges:=True
End Sub
This seems to be working fine (in the respect that when the user closes excel it saves this file without a prompt), the issue i have (and i appreciate it is a small issue) is that excel remains open but without any open workbooks. Is there a way i can amend my code so that excel closes too.
I m executing some macros in my file. After executing I need to save my file automatically (which is already saved). Means I dont need to press "CTRL + S".
View 4 Replies View RelatedI have copied the below coding from the forum.
View 3 Replies View RelatedI have just upgraded from excel 2000 to excel 2003 I have always set autosave to 5 minutes in case I press the wrong button as I did tonight. I also had autosave set to save all open workbooks
I am a heavy user of excel and often have many workbooks open at the one time.
I wonder if anyone could help with some VBA code to automatically save a copy of a workbook on a monthly basis (Say the 1st of each month, or the nearest date to that if it has not been saved on the 1st.)
I would like this to be done without user input, and to be saved with the current workbook name + the current date. It can also be saved in the current workbook folder. I am using Win XP Pro and Excel 2003. This would also obviously need to check if the file currently exists, we can say the filename is Cars and the directory is C:Data. Finally I do not wish to stop the users from saving their own version with save or save as.
Please review the following and advise the one Best Connection needs to save in Excel 5.0/95 format without prompting me about incompatability issues
Sub Tomo() ....
I have seen a number of discussions on this subject. I used Roy's code posted here and wanted to make a small change. I want to give the user a warning msg, few minutes before the autoclose would be scheduled to occur. This would give the user a chance to change cell selction or do somethig to reset the timer. If the message goes unanswered, the autoclose should occur as scheduled.
I am attaching a workbook with the macros installed in workbook, standard module and worksheet.
It dosn't seem to do what I want. It seems to work, but it acts differently everytime I run it.
Can someone please look at the attached workbook and help me fix it?
Is it possible to disable the autosave feature in vba?
View 3 Replies View RelatedI am trying to make a save&close workbook macro.
I found several examples on google, but unfortunatly it conflicts with another macro I use for forceing users to enable macros (hide all sheets except one if macros are disabled).
The attached file is an example contaning the save&close code and the show/hide sheets depending on macros enabled.
If the file is opened with macros disabled then only one sheet will be visible.
If the file is opened with macros enabled other sheets are visible.
The problem if that this code uses a custom save, witch makes the save&close not save... (in module1 and in ThisWorkbook)
The pourpose of the save&close is to make sure some users don't forget the excel open and thus block access to it. So if a certain idele time passes excel has to save and close without any confirmation messages.
I'm using a CALL Macro to split up a HUGE macro into different pieces:
Code:
Sub RSLDASHBOARDV2()
'Macro recorded 12/14/2010 by Ryan R. Koleno, Pharm.D.
'Last Updated 7/10/12 by Ryan R. Koleno, Pharm.D.
'Do Not Modify Code Unless Given Proper Privileges to do so.
Dim APPSPD As Worksheet
With Application
.ScreenUpdating = False
.Calculation = xlCalculationManual
[code]...
The first few macros dealing with page setup and what not work fine but when it hits the Pivot table code for the STATSPIVOT macro it errors out stating: "Run-time error '1004': Unable to get the PivotItems property of PivotField class' at this point in the code:
Code:
objField2.PivotItems( _
"TRC").Position = 1
objField.PivotItems( _
"MEDCO MAIL OR AOB").Position = 2
When this macro is not split up it worked fine as written. Am I overlooking something in the Call Macro's code or is there a variable I'm not aware of. I have included the Pivot Table code that errors out as well.
Code:
Sub STATSPIVOT()
'STATS PAGE BASED ON STATS DATA TAB
Sheets("STATS DATA").Select
Dim objTable As PivotTable, objField As PivotField
ActiveWorkbook.Sheets("STATS DATA").Select
Range("A1").Select
[code]...
I am making a spreadsheet that sorts and pastes, but I need to know if I can add a code to the Sort and Paste Macro that will open the second spread sheet needed without just already having it open and using the
Windows("estimate sheet one.xls").Activate
I have a macro where I manually select a cell then the macro kicks in to copy and paste the contents into the Find function. From there it goes to another work sheet, clicks on a cell in column one and searches for matching cell contents. Then If false it manually goes back to the original worksheet/cell and then I input a N in the left adjacent cell. If true I enter a Y. Right now I can only run this for the specific cell the macro was recorded for. I would like to expand this.
What I would like to do create a loop in the macro that waits for my cell choice input then continues with the with the Find function. If false the macro should just loop back to the original worksheet/cell and wait for input, ie the next cell selected. However, if true a worksheet/cell is selected, a Y is input and it loops back to the original cell and waits for input.
This is the code I use to call a macro when the macro Im calling is in the same workbook.
[Code].....
However, I would like to call this same macro when using another workbook. I copied the macro "Clearformating" and pasted into a personal macro workbook module. However when I add this code to the sheet tab it will not run the macro.
I also tried this code.
[Code] .....
I have a macro that I found somewhere on the net to look within a folder and list all the files of a certain file extension.
The macro to do this is in the attached example and is called 'Get_File_Names_Within_Dir_ext'.
I have created a basic userform outline, 'UF1' for the user to define:
Select File Extension
Select Folder to Search
Destination Sheet
I just don't have any idea how to sync the two.
If you type 'exe' into 'TB1_File_Extension' of 'UF1' the macro should search for '*.exe' files within the specified folder.
The search folder 'RefEdit1' box should open a windows explorer box (or some such) so that the user can select the directory in which to search for the previously specified file extension.
'TB2_Destination_Sheet' is a text box for the user to type the sheet within the workbook in which to list the files found within the specified directory.
'CB1_Find_Files' should activate the macro to find any files for the specified criteria.
There is also a Button 'Find File Types' in Sheet1 of the file which should activate the userform 'UF1'.
I have a worksheet in which I have a worksheet_change macro. This worksheet_change macro makes sure that a few cells will keep their colors, even if the user copies and pastes a new value to that cell. This worksheet_change macro runs each time there is a change on the worksheet. Now my problem is that on the same sheet I have an update list macro which updates around 20.000 rows and two columns (which is alltogether around 40.000 values) and it takes a while to run. So.. it takes a loooooooooot of time (too much) when these two macros both run.
My question is that can I somehow disable the worksheet_change macro while the update list macro runs. I mean something like when I start the update list macro to disable worksheet_change macro and when the update list macro finishes, then reenable worksheet_change macro?
I need a macro to get the values from cells D29 and H24 in the Resource Calculator sheet and populate it into cells N8 and O8 in the Input form.
Users will then be able to change the information in the calculator and click the macro again to populate N9 and O9 and so on.
Is there a way to do this?
I've attached the file for you to see.
I have a macro which refreshes a query when the spreadsheet is opened. This works fine when online.
However, if the user is not online, the query is unable to refresh and the macro just hangs.
Is there a code which will enable me to say " if unable to refresh then move on to the next line"?
here's the code below.
Private Sub Workbook_Open()
Sheets("Houselist").Activate
Selection.QueryTable.Refresh BackgroundQuery:=False
Sheets("Front").Select
Range("A1").Select
End Sub
I am looking for a macro that i can store in my personal.xlsb. what i need is pretty much is something like this
private sub workbook_open
if workbook.name "inventorysummary.csv"
then application.run "personal.xlsb!capacity"
end sub
I only need it to run just for this file and i cannot place it in the file due to it gets replaced every day. Which if it didn't get replaced. I know how to do auto opens when the file stays the same I am just unsure for this.
I use Excel 2003 at work. I'm looking for some code that will Open a folder and then lets the user to select a file then continues to run the macro.
The file name they select will look similar to this K2271011.504 or K3011111.201
1st - Need a macro to change a range of cells colours based on a single cell having a value greater than 0.001. ie. cells A1 - G1 need to change to grey based on cell F1 having a value greater than 0.001 entered in it?
2nd - Also a macro for deleting the text contents of cell C1 based on cell F1 having a value greater than 0.001. Therefor if cell F1 has a number greater than 0.001 it changes the colour of celss A1 - G1 and also deletes the text in cell C1?
I have written two VBA programs around the same time. Both run on open and pull external data and create graphs. My problem is that I want the end user to be able to run the report multiple times by choosing the name of the macro from the Excel macro menu (i.e. Tools>Macro>Macros) but only one of the workbook macros shows up on the menu. why the other macro is not visible on this menu???
View 2 Replies View RelatedI've recorded a macro that copies an entire tab into a new spreadsheet then goes on the copy and paste information from one tab to another.
When I run the macro from the Tools>Macros menu it works perfectly.
But when I copy the code and add it to that of a button it fails and posts the following error: Run-time error '1001': Select method of Range class failed.
The first attachement shows the code for the macro as it is alone, and the second shows how I simply copied and pasted it into the 'view code' window of the button.
Needless to say I'm a beginner at macros and only every record them, I can usually make stuff work that way but this has me stumped!
Put in a statement within a Macro that populates cells with the values that I want it to but instead of populating all at the same time, is it possible for the values to be delayed.
I have designed a mock spreadsheet (attached) it has two columns 'Before' and 'After'
After = Before values (in this mock)
When you press the button, the values are populated straight into the 'After column' can we add the delay between the values? So that the values dont come up straight away.
Macro to export and import a module and assigning different macro automatically ...
View 9 Replies View RelatedI have recorded the following marco and it works fine. I would like to modify it so the user would highlight a range of cells rather than have the fixed area :
"'ConsExecProp@20120920'!R4C5:R113C21"
What code lines would need to be added?
Application.Goto Reference:="R4C5"
ActiveWorkbook.PivotCaches.Create(SourceType:=xlConsolidation, SourceData:= _
Array("'ConsExecProp@20120920'!R4C5:R113C21"), Version:=xlPivotTableVersion12 _
[code]....