How To Copy Fix Range From Multiple Workbooks To Master File
Aug 6, 2014
I have multiple excel files from which I would like to copy specific ranges to a master file. The row should add up to the previous rows. From this side I have no problems things work fine. The problem is to copy the header which remains the same data to the top of the master file. Currently the macro I use overwrite the first line of the master file. So I loose the date from one of the excel files.
That does allow me to filter the output in Master, but ideally what I would want to do is not have to set aside 300 lines in the Master file for each of the Staff files. Conceptually, I'd like to have the spreadsheets Staff A, Staff B, etc. look for and export only lines which have data in them and then have Master bring those lines in automatically. This may not be possible, in which case your suggested solution is the best approach.
What I have is a master file that needs to pull info from other sources (a simple copy and paste) those files are called Inventory_xxxx.xlsm . Inside the master file, there are cells with the number of the inventory.
What i need is a way to tell excel to check what number is in the cell, open the files with that number, get the info from the files and paste it back in the master file... and the part that i consider the trickiest, a way to loop it.
For example, lets say i have 2248 in cell A10, it should open Inventory_2248.xlsm copy the contents from cell N4, O4, P4, Q4, R4 and S4(Inventory File) into N10,R10,S10,T10 and U10 (Master file) respectively then in A11, there could be a 2250 so it should open the 2250 file get the info, paste it and so on.....
Now I don't even know if this is do-able or just impossible, been fiddling with various codes to no avail.
Objective: use VB to copy the first sheet (tab) from every Excel file in a specific folder to a new sheet/tab (for each) in a master spreadsheet. I will then aggregate this data into a summary table.
Following the advice of an old thread (Access: VBA combining multiple excel files to 1 new sheet), one time for each file in the folder. So with three excel files in the folder, I get 3 new tabs in my master spreadsheet but all are copies of the first tab in the master spreadsheet.
I'm wondering if maybe the code, which was in a post from 5 years ago, needs to be "modernized" for Excel 2007. Thanks for any help.
This is the code I'm using:
Fpath = "C: emp2" ' change to suit your directory Fname = Dir(FilePth & "*.xls")
Do While Fname <> "" Workbooks.Open Fpath & Fname Sheets(1).Copy After:=Workbooks("Master.xlsm").Sheets(Workbooks("Master.xlsm").Sheets.Count) Workbooks(Fname).Close SaveChanges:=False Fname = Dir Loop
I have 17 workbooks which contain similar data and formatting. The only variance is the number of rows of data in each. I want to write a macro in the Master worksheet that will accomplish the following
1. Create a worksheet name in the master workbook with the same name as the workbook that it's pulling data from. 2. Copy over the column headings from columns A:P to the newly created worksheet on the master workbook 3. Copy over all rows that contain the word "down" under column D titled Operational status
The naming convention for the master workbook will be titled "All Switches". The naming convention for the worksheets containing the data are titled Port_Map_on_tiegcsw01, Port_Map_on_tiegcsw02, Port_Map_on_nypgcsw01. There are other names , but I can reference the code an update accordingly.
I found some searches on the forum for creating a macro to copy data between workbooks, but not quite sure how to write the macro for the three functions.
how to loop through workbooks in a certain directory and copy the rows in sheet1 where column B contains numbers greater than zero, and then pasting them into a new master workbook. The sheets will be named differently each week but will always be in the same directory.
I have tried to write the below VBA to copy a specific cell to a specific workbook. I have set the folder path in B1 and listed the file names in column E4 onwards. E1 being the number of files in column E. I get a run-time error 91 "Object variable or With block variable not set" on Current File = ActiveWorkbook.name.
Sub UpdateParameters() Dim CurrentFile As Workbook Dim wbOpen As Workbook
I have multiple sheets (lets say for example a 100 of them) where I need to copy a Value from a fixed location (Col#,Row#) from each of the 100 sheets and store it in a column in a Master sheet.. in the end the Master sheet has only two columns.. first column A contains file name (of the sheet where I copied).. then adjacent column B has the copied value.. in other words the Master sheet will have 100 rows and two columns..for this example..
I have approx. 35 workbooks similar to the attached in a single directory. Each workbook has 3 tabs named Help, Example and Template. I need to copy the 36 Template tabs into one new workbook. I would also like to rename each tab in the new workbook based on the text in cell A1 of the originating Template tab. M
Basically, i have a common workbook template that is used by multiple users across the business to request a cost for numerous new products.
Within the template, there is a common section at the top, where specific project information is entered. There is also a table beneath where 1 or many products can be entered, with specific information relating to that product in the same row.
All the submitted requests are uploaded via an email attachment, to a particular sharepoint directory.
What i would like to do in the master workbook is the following:-
1. Open in turn every uploaded workbook within the sharepoint directory and copy the following cells into the master workbook, each in it's own row (or next available), with the data in adjacent cells.... 1st cell to enter data is $B6.
Cells to copy from each sheet:
Common info contained within cells: $DG$2,$N$11,$N$12,$N$19,$N$13,$AO$7,$AO$8,$AO$9,$AO$10,$AO$11,$AO$12,$AO$12,$AO$13,$AO$14,$BO$8,$BO$11,$BO$14
Product specific info: $U37, $AD37, $AH37, $DH37, $C37, $O37
Depending on the number of products requested, we need to repeat (loop?) until it finds the next blank row in the table. I have hidden a blank row in the table, so there will always be one!
All of the common information needs to be included for each product specific entry.
For each file, once the upload has been completed, i would like the file to be moved to another "archive" directory.
I have attached the template for information. The master workbook is still in development so can't share currently.
Currently i am looking for a macro to combine information in different workbooks but on the same sheetname. In every single workbook i have a worksheet with a single row of information which has to be added to one big file. In stead of doing all 200 manually i would like vba to select this particular range, copy it and paste them under eachother in one single worksheet in a different workbook. Is this possible?
for examble book 1, sheet 1 has all the data in rang a1 till z1. this has to be copied to the masterfile under a1. this goes on from book 1 till book 200.
I have 600+ variations of the same workbook. Contained within each workbook is a worksheet, from which I need to copy and paste a range of cells into one "master" workbook. For example, in workbook 1 I need to copy rows 2:5 and paste that into the master workbook in cells 2:5. Then I need to open workbook 2, copy rows 2:5 and paste them into the master workbook starting at row 6. I have fumbled my way through everything except the pasting part into the Master workbook.
I am trying to make my macro more dynamic for a spreadsheet I am working on. I have this code which splits out worksheets (using the specific names of the worksheets-not dynamic) from a main workbook into template workbooks (which are basically just an empty workbook because I didn't know how else to do it) and then saves them using the paths below. I would like to make this more dynamic by splitting the different worksheets into new workbooks based on a key column in the hierarchy worksheet.
Basically I have a list of accounts in column B with the file name they should be exported to in column A. There are about 30 accounts being split into 6 different region files. Also note that the same account might be listed multiple times in column A (needed to add multiple numbers for other lookup formulas in the worksheets) but that account worksheet will still only be going to one of the six region files and not to multiple regions. After these are copied to an individual file I would like to save it to a location on my computer. All files will go to this location.
VB: Sub Create_Subfiles()
Dim FDMName As String Dim FBName As String Dim DIYName As String Dim WMName As String
I have 30 xlsx files in a folder and I want the first sheet of all that files to be merged to a new workbook. The thing is I don't want the macro to copy paste the value in to the same sheet of the new master sheet like Ron's excel merge tool does. I want a macro to create new 30 sheets on the master file and copy the data from source files. And I want the newly added sheets to be renamed as the source file name. This works well except the sheet renaming thing.
Sub Merge2MultiSheets() Dim wbDst As Workbook Dim wbSrc As Workbook
I have a folder containing about 56 workbooks each uniquely named with a tab just called "Worksheet". What I'd like to do is make a master file that creates 56 tabs, each tab being from 1 of the 56 workbooks.
I tried creating a macro but it is bugging out on me after the first workbook and I'm not that strong in VBA. Below is the macro I've been working on (I've excluded the folder path for obvious reasons):
Sub Merge() Path = "--------" Filename = Dir(Path & "*.xlsx") Do While Filename "" Workbooks.Open Filename:=Path & Filename, ReadOnly:=True For Each Sheet In ActiveWorkbook.Sheets Sheet.Copy After:=ThisWorkbook.Sheets(1) Next Sheet Workbooks(Filename).Close Filename = Dir() Loop End Sub
I could manually do it but this will be a recurring event where the file names will not be similar, so I'd like to build a process to handle that scenario.
I have a folder that contains many workbooks that contain the same layout of information just with different workbook names. Im looking to copy certain customer information from each WB to a master sheet, such as name, adress, city, ect.
-Folder to lookin for all WB's information - D:Documents and SettingsRonMy DocumentsNew Folder (3)
-The sheet to copy the info from in each WB is named "Quote"
-The ranges to copy are B5:D5, B6:D6, F6:I6, K6:M6
-I want to use a command button to trigger the code and copy the info to the open WB on Sheet12.
-The info going into in sheet12 is layed out across each column.
Example of Sheet12:
A1 = B5:D5, B1 = B6:D6, C1= F6:I6, D1 = K6:M6, so each copied WB will used the same layout and just copy to the next line. Example : A1 = B5:D5, B1 = B6:D6, C1= F6:I6, D1 = K6:M6 (Ea. WB information) A2 = B5:D5, B1 = B6:D6, C1= F6:I6, D1 = K6:M6 (Ea. WB information) A3 = B5:D5, B1 = B6:D6, C1= F6:I6, D1 = K6:M6 (Ea. WB information)
I have the following code that works properly, Copy & Paste Same Range On Protected Sheet From Multiple Workbooks
Sub RunCodeOnAllXLSFiles() Dim lCount As Long Dim wbResults As Workbook Dim wbCodeBook As Workbook, book1R As Range Application. ScreenUpdating = False Application.DisplayAlerts = False Application.EnableEvents = False On Error Resume Next Set wbCodeBook = ThisWorkbook With Application.FileSearch .NewSearch 'Change path to suit...............
I will have about 100 files to merge together that are in one directory. Is it possible to merge all workSHEETS named "Bob" from each workBOOK and end up with just one master file?
I found this code on this web site (no proper reference!). It doesn't work for me. Yes, I changed the directory and it still didn't work. I will have 12 columns (A:L) and differing # of rows in each "Bob" worksheet.
VB: Sub g_CombineMultWB_AllXLSFiles() ' This Will combine all EMALL XLS files located in the ' S:DMSMSPOMSMaster POMS NIIN DataMaster EMALL Data FilesEMALL Excel Folder ' into a single worksheet in a newly created (or previously existing) workbook
how to consolidate multiple workbooks into the master workbook? I need to consolidate 12 workbooks into the master workbook every month. The subsidiaries will report me their figures monthly. Hereby attached one of the subsi, "B Co" reporting package, and the master copy "XYZ Holding Co" how it look like. Hence, may I know how to write a macro so that it will auto update monthly when the subsidiaries return me their reporting package, so that I can auto update in my master copy for tab BS and tab PL.
I need to consolidate a lot of information from multiple workbooks all the workbooks are located in a folder, i am not bothered about running each one separately or a group at a time, each work book has ten sheets with each sheet in the workbook being different, it needs to add to the next blank row on each sheet.
I would like to merge multiple workbooks into a master workbook. All the individual workbooks are identical and only have 1 sheet, and I would like to append them to the master as worksheets then sum them all together. The front sheet showing the totals from all the merged ones.
At our small firm, each staff member keeps a small excel spread sheet on the network that contains their "work in progress." This spreadsheet is roughly six columns wide and roughly twenty lines long.
What I am attempting to do is have one "master" spreadsheet with a tab for each staff member that links their "work in progress" so that partners and managers can easily see how much work each of the fifteen or so staff members have.
I can create fifteen different tabs and fifteen different files on the network and link =[Staff1.xlsx]Sheet1!$A$1:$G$25 =[Staff2.xlsx]Sheet1!$A$1:$G$25 =[Staff3.xlsx]Sheet1!$A$1:$G$25 and so on.
If I make a change to the layout of the work in progress sheet, I have to delete and copy the file fifteen times, then go back through and re-link fifteen tabs to fifteen workbooks in order to keep it uniform.